[ANN] sgminer v5 - optimized X11/X13/NeoScrypt/Lyra2RE/etc. kernel-switch miner

[vgo]

Hi Wolf, as far as i can see new generation of AMD cards (R9 380) already in all shops. Looking around the forum i could see that hashing result for this model is ~3 mh\s (x11) seems like it's too low.
do you have any results for this card of your private miner in x11 algo?

just interesting of buying this cards and (if you have good results) your miner as well.

Thanks.

R9 380 is a rebrand of the R9 285. As far as I can see, the stock clocks for the 380 are 1000/1550. Test results incoming.

EDIT:

(NSFW): https://ottrbutt.com/miner/x11wolf-07082015.png

wolf-x11Tahitigw64l8ku0.bin ??

Only 3.6Mh/s  Asus R9 285 2gb @ R9 380 Bios  1100/1375mhz.  CCC 15.8 Beta

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -k darkcoin-mod  -o stratum+tcp://umine.co.uk:4640 -u bL2WMZfNmGtChg5nmw5Y -p x --xintensity 160 -w 64 --vectors 1 -g 2 --lookup-gap 2

[chrysophylax]

Hi Wolf, as far as i can see new generation of AMD cards (R9 380) already in all shops. Looking around the forum i could see that hashing result for this model is ~3 mh\s (x11) seems like it's too low.
do you have any results for this card of your private miner in x11 algo?

just interesting of buying this cards and (if you have good results) your miner as well.

Thanks.

R9 380 is a rebrand of the R9 285. As far as I can see, the stock clocks for the 380 are 1000/1550. Test results incoming.

EDIT:

(NSFW): https://ottrbutt.com/miner/x11wolf-07082015.png

wolf-x11Tahitigw64l8ku0.bin ??

Only 3.6Mh/s  Asus R9 285 2gb @ R9 380 Bios  1100/1375mhz.  CCC 15.8 Beta

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -k darkcoin-mod  -o stratum+tcp://umine.co.uk:4640 -u bL2WMZfNmGtChg5nmw5Y -p x --xintensity 160 -w 64 --vectors 1 -g 2 --lookup-gap 2

what procedure did you you go through to set this up? ...

many have incorrectly initiated the process AND in your setup - there are no oc adjustments ( gpu and mem clocks ) ...

let us know ...

#crysx

[vgo]

The process is correct... but with Tahiti.bin 940KB., no Tonga.bin

OC via Gpu Tweak 1100core/1357mem. Mhz. Drivers CCC 15.8 Beta.

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -k darkcoin-mod  -o stratum+tcp://umine.co.uk:4640 -u bL2WMZfNmGtChg5nmw5Y -p x --xintensity 160 -w 64 --vectors 1 -g 2 --lookup-gap 2

 

[xexulcm]

Hi all I want to mine x13 gives me HW with this line , I have an ATI Radeon 6950 2GB GDDR5


setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -k x13mod  -o stratum+tcp://hashpower.co:3633 -u 1D88AdpkVDnigQEhuUoGFvPGoNAGZucVab -p x -I 15 -w 64

[vgo]

Tonga wasn't out when I released the bins, so there's not one.

Thanks Wolf0.





And thanks rednoW  https://bitcointalk.org/index.php?topic=632503.msg11875320#msg11875320  


    6.6 Mh/s      Tonga!!!!!

[logistika]

i have simple questions, would be nice to get answers.

Windows 7 64bit
GPU 280x
Drivers: amd-catalyst-15.7.1-with-dotnet45-win7-64bit
sgminer from Nicehash: sgminer_v5.1_2015-03-09-win32.zip
sgminer.conf 1050/1500

Can not get above 3700 Mh/s , and i see that there is 7000 Mh/s out there

Then i downloaded Wolf0's optimized bins for X11-X13-X15 algorithms, and rename one of those bins to my already created bin in my sgminer folder, and replaced that.

Now sgminer does not even start, some error occures.

What i am doing wrong ?
First i want to get those default 6000 Mb/h

Can you help me with some config file? Or some advice ?
thanks.

[chrysophylax]

i have simple questions, would be nice to get answers.

Windows 7 64bit
GPU 280x
Drivers: amd-catalyst-15.7.1-with-dotnet45-win7-64bit
sgminer from Nicehash: sgminer_v5.1_2015-03-09-win32.zip
sgminer.conf 1050/1500

Can not get above 3700 Mh/s , and i see that there is 7000 Mh/s out there

Then i downloaded Wolf0's optimized bins for X11-X13-X15 algorithms, and rename one of those bins to my already created bin in my sgminer folder, and replaced that.

Now sgminer does not even start, some error occures.

What i am doing wrong ?
First i want to get those default 6000 Mb/h

Can you help me with some config file? Or some advice ?
thanks.

when you place a question like this - its VERY relevant to also include the commandline you are using to get these figures - so that everyone can see what EXACTLY you are doing ...

if you have performed the correct procedure with wolfs bins - you should be getting around the 6.5MH or more on x11 ...

the info you have provided IS relevant - but not enough ...

#crysx

[tanoury]

Are you kidding? 3700 Mh/s is smokin' HOT!!!

[chrysophylax]

Are you kidding? 3700 Mh/s is smokin' HOT!!!

in what algo? ... x11? ... not a chance ... that is basic sgminer rate without the optimized wolf bins ...

if you think that is 'smokin hot' - try putting the bins in place and get another 3MH on top of that using the SAME settings ...

#crysx

[tanoury]

Are you kidding? 3700 Mh/s is smokin' HOT!!!

in what algo? ... x11? ... not a chance ... that is basic sgminer rate without the optimized wolf bins ...

if you think that is 'smokin hot' - try putting the bins in place and get another 3MH on top of that using the SAME settings ...

#crysx

I have wolf's bins and get 6.6M per HD 7970 card using x11. But 3700M??

[Xmm]

Ati 280x 4.86M  on x13 (W0lfs bin) is it ok?
All thread about x11.
And what normal speed for 290?
Thank You

[chrysophylax]

Are you kidding? 3700 Mh/s is smokin' HOT!!!

in what algo? ... x11? ... not a chance ... that is basic sgminer rate without the optimized wolf bins ...

if you think that is 'smokin hot' - try putting the bins in place and get another 3MH on top of that using the SAME settings ...

#crysx

I have wolf's bins and get 6.6M per HD 7970 card using x11. But 3700M??

hahaha ... i missed the 'M' ... in that case - im with you all the way ...

im off to get another coffee - day almost over and STILL not awake ... either that - or i just cant read anymore ...

...

btw - i have gigabyte 7970 oc and gigabyte 20x oc cards - and they all do the same hashrate as yours using gpu / mem clocks of 1100 / 1500 ...

nice work ... though wolf has increased the hashrate by a little bit with his own private miner optimizations ...

#crysx

[chrysophylax]

4.86M  on x13 (W0lfs bin) is it ok?
All thread about x11.
Thank You

is that with 7970 / 280x? ...

i can test on the cards when i get back to the office and let you know what we get if you like? ...

but id be guessing that wouldnt be a bad hashrate for x13 ...

#crysx

[Xmm]

4.86M  on x13 (W0lfs bin) is it ok?
All thread about x11.
Thank You

is that with 7970 / 280x? ...

i can test on the cards when i get back to the office and let you know what we get if you like? ...

but id be guessing that wouldnt be a bad hashrate for x13 ...

#crysx

Edit my post.
280x of course and 5.7M with 290.

[chrysophylax]

4.86M  on x13 (W0lfs bin) is it ok?
All thread about x11.
Thank You

is that with 7970 / 280x? ...

i can test on the cards when i get back to the office and let you know what we get if you like? ...

but id be guessing that wouldnt be a bad hashrate for x13 ...

#crysx

Edit my post.
280x of course and 5.7M with 290.

kool ...

where did you get the optimized bins ( so we can test the exact same ones ) ? ...

#crysx

[Xmm]

kool ...

where did you get the optimized bins ( so we can test the exact same ones ) ? ...

#crysx

https://ottrbutt.com/miner/wolf-x13Tahitigw64l8ku0big4.bin
https://ottrbutt.com/miner/wolf-x13Hawaiigw64l8ku0big4.bin

[logistika]

i have simple questions, would be nice to get answers.

Windows 7 64bit
GPU 280x
Drivers: amd-catalyst-15.7.1-with-dotnet45-win7-64bit
sgminer from Nicehash: sgminer_v5.1_2015-03-09-win32.zip
sgminer.conf 1050/1500

Can not get above 3700 Mh/s , and i see that there is 7000 Mh/s out there

Then i downloaded Wolf0's optimized bins for X11-X13-X15 algorithms, and rename one of those bins to my already created bin in my sgminer folder, and replaced that.

Now sgminer does not even start, some error occures.

What i am doing wrong ?
First i want to get those default 6000 Mb/h

Can you help me with some config file? Or some advice ?
thanks.

when you place a question like this - its VERY relevant to also include the commandline you are using to get these figures - so that everyone can see what EXACTLY you are doing ...

if you have performed the correct procedure with wolfs bins - you should be getting around the 6.5MH or more on x11 ...

the info you have provided IS relevant - but not enough ...

#crysx

"intensity" : "20",
"gpu-engine" : "1030",
"gpu-memclock" : "0-1500",
"thread-concurrency" : "0",
"worksize" : "64",
"lookup-gap" : "2",
"shaders" : "0",
"gpu-threads" : "1",
"gpu-fan" : "0-80",
"auto-fan" : true,
"no-extranonce" : true,
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "65",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-only" : true,
"failover-switch-delay" : "10",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"no-client-reconnect" : true,
"queue" : "2",
"scan-time" : "3",
"tcp-keepalive" : "30",
"shares" : "0",
"no-submit-stale" : true,
"submit-stale" : "false",
"kernel" : "x11mod",
"kernel-path" : "/usr/local/bin"


And please what is correct procedure to use Wolf0's optimized bins ? step by step?

[rednoW]

Ati 280x 4.86M  on x13 (W0lfs bin) is it ok?
All thread about x11.
And what normal speed for 290?
Thank You

7950 1100/1300 ~4.85mhs kachur bin

[logocreator]

Hi anyone can share wolfs bins for Windows ? thanks

[tanoury]

And please what is correct procedure to use Wolf0's optimized bins ? step by step?

When you started sgminer with those settings it produced a bin file in your sgminer directory that looks something like this:
darkcoin-modTahitigw64l8ku0.bin

Rename Wolf0's bin so that it's identical to the one in your sgminer directory and put his in the sgminer directory.

Start sgminer and you should get about a 6 Mh/s X11 hash rate.