|
ivcelmik
|
 |
August 14, 2015, 03:14:19 PM |
|
Hi guys need help on a rig i have 1x R9 280x and 3x 750 Ti how can i mine with R9 with sgminer because i get error the ccminer for nvidia work perfect.
Any sugestions?
Thx in advance
|
|
|
|
|
|
|
|
|
|
|
|
Every time a block is mined, a certain amount of BTC (called the
subsidy) is created out of thin air and given to the miner. The
subsidy halves every four years and will reach 0 in about 130 years.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
chrysophylax
Legendary
 Offline
Activity: 2814
Merit: 1091
--- ChainWorks Industries ---
|
|
August 14, 2015, 11:43:13 PM |
|
Hi guys need help on a rig i have 1x R9 280x and 3x 750 Ti how can i mine with R9 with sgminer because i get error the ccminer for nvidia work perfect.
Any sugestions?
Thx in advance
nvidia and amd use two different drivers to access the cards in the system ... you cannot mix and match them ... at least not from a 'standard' point of view ... so suggestion is simple - remove the amd card and put it in a different system ( or build a small system ) that will be used for mining on that card alone ... it required catalyst drivers and ( im assuming from the description ) you have nvidia drivers installed ... btw - depending on what you are mining - you are MUCH better off using one of the forks of ccminer for the nvidia mining ... the most universal one is sp's fork - but there are a few that are suited to different mining - like tpruvot and djm34 etc ... sp-mod is here - https://bitcointalk.org/index.php?topic=826901 ... #crysx |
|
|
|
Hippie Tech
aka Amenstop
Legendary
Offline
Activity: 1624
Merit: 1001
All cryptos are FIAT digital currency. Do not use.
|
|
August 15, 2015, 12:21:23 AM |
|
Hi guys need help on a rig i have 1x R9 280x and 3x 750 Ti how can i mine with R9 with sgminer because i get error the ccminer for nvidia work perfect.
Any sugestions?
Thx in advance
Try creating a fake display by detecting then extending the main display to the nvidia cards. |
|
|
|
|
ivcelmik
|
|
August 15, 2015, 05:00:38 AM |
|
Hi guys need help on a rig i have 1x R9 280x and 3x 750 Ti how can i mine with R9 with sgminer because i get error the ccminer for nvidia work perfect.
Any sugestions?
Thx in advance
Try creating a fake display by detecting then extending the main display to the nvidia cards. Ok thx guys i let u know if i can make them works |
|
|
|
|
pallas
Legendary
Offline
Activity: 2716
Merit: 1094
Black Belt Developer
|
|
August 15, 2015, 08:00:16 AM |
|
On Linux you can easily mine with AMD and nvidia cards together. Use AMD as primary then install cuda without opengl.
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2814
Merit: 1091
--- ChainWorks Industries ---
|
|
August 15, 2015, 08:10:05 AM |
|
On Linux you can easily mine with AMD and nvidia cards together. Use AMD as primary then install cuda without opengl.
dont they both need different drivers? ... i tried this a while ago and it just refused to work ... #crysx |
|
|
|
pallas
Legendary
Offline
Activity: 2716
Merit: 1094
Black Belt Developer
|
|
August 15, 2015, 08:31:10 AM |
|
On Linux you can easily mine with AMD and nvidia cards together. Use AMD as primary then install cuda without opengl.
dont they both need different drivers? ... i tried this a while ago and it just refused to work ... #crysx You can install both drivers on the same machine; the nvidia one and cuda should be installed by the run file, not the deb. |
|
|
|
|
ivcelmik
|
|
August 15, 2015, 08:52:50 AM |
|
Can someone help me with a config for AMD 7950 for Lyra2REv2
|
|
|
|
|
|
lbr
|
|
August 15, 2015, 11:36:46 AM |
|
Hi guys need help on a rig i have 1x R9 280x and 3x 750 Ti how can i mine with R9 with sgminer because i get error the ccminer for nvidia work perfect.
Any sugestions?
Thx in advance
1) Ensure that all cards work - GPU-Z/Device Manager/AfterBurner 2) Start miner on AMD GPU only, use --gpu-platform. If it won't work at all - re-install AMD drivers. If it will work but won't display temp/speeds or enter "3d mode" when mining - you need dummy plug. R9 290x can use simple DVI dummy with resistors. Or you can plug monitor in it. nvidia and amd use two different drivers to access the cards in the system ...
you cannot mix and match them ... at least not from a 'standard' point of view ...
Yeah.. right..  |
|
|
|
chrysophylax
Legendary
Offline
Activity: 2814
Merit: 1091
--- ChainWorks Industries ---
|
|
August 15, 2015, 12:53:44 PM |
|
Hi guys need help on a rig i have 1x R9 280x and 3x 750 Ti how can i mine with R9 with sgminer because i get error the ccminer for nvidia work perfect.
Any sugestions?
Thx in advance
1) Ensure that all cards work - GPU-Z/Device Manager/AfterBurner 2) Start miner on AMD GPU only, use --gpu-platform. If it won't work at all - re-install AMD drivers. If it will work but won't display temp/speeds or enter "3d mode" when mining - you need dummy plug. R9 290x can use simple DVI dummy with resistors. Or you can plug monitor in it. nvidia and amd use two different drivers to access the cards in the system ...
you cannot mix and match them ... at least not from a 'standard' point of view ...
Yeah.. right.. for all the time ive been mining - i have never seen this done successfully ... especially with windows ... now i have  ... the farm will still be sticking with linux - but damn good to see ... btw - how did you get all 10 gpus in the one system without a BIOS change? ... #crysx |
|
|
|
go6ooo1212
Legendary
Offline
Activity: 1512
Merit: 1000
quarkchain.io
|
|
August 15, 2015, 01:58:48 PM |
|
Which MOBO is that running 10 GPUs , mate ? |
|
|
|
|
Eliovp
Legendary
Offline
Activity: 1050
Merit: 1293
Huh?
|
|
August 15, 2015, 02:36:40 PM |
|
Hi guys need help on a rig i have 1x R9 280x and 3x 750 Ti how can i mine with R9 with sgminer because i get error the ccminer for nvidia work perfect.
Any sugestions?
Thx in advance
1) Ensure that all cards work - GPU-Z/Device Manager/AfterBurner 2) Start miner on AMD GPU only, use --gpu-platform. If it won't work at all - re-install AMD drivers. If it will work but won't display temp/speeds or enter "3d mode" when mining - you need dummy plug. R9 290x can use simple DVI dummy with resistors. Or you can plug monitor in it. nvidia and amd use two different drivers to access the cards in the system ...
you cannot mix and match them ... at least not from a 'standard' point of view ...
Yeah.. right.. for all the time ive been mining - i have never seen this done successfully ... especially with windows ... now i have ... the farm will still be sticking with linux - but damn good to see ... btw - how did you get all 10 gpus in the one system without a BIOS change? ... #crysx Check his signature. And i have to say. Congrats. Been able to get 8 running on linux. Had no more space to connect any extra gpu's. And yes, i would also love to know what mobo that is. Gotta go get me one of those for sure Greetings |
|
|
|
|
JuanHungLo
|
|
August 15, 2015, 03:52:18 PM |
|
Mobo? HA! What about the power supply?
|
Bull markets are born on pessimism, grow on skepticism, mature on optimism, and die on euphoria. - John Templeton
|
|
|
Hippie Tech
aka Amenstop
Legendary
Offline
Activity: 1624
Merit: 1001
All cryptos are FIAT digital currency. Do not use.
|
|
August 15, 2015, 03:58:20 PM |
|
Mobo? HA! What about the power supply?
Those must be 4 7990s and I'll guess 3-4 psus are being used.. |
|
|
|
|
jjjordan
|
|
August 15, 2015, 05:08:22 PM |
|
Mobo? HA! What about the power supply?
Those must be 4 7990s and I'll guess 3-4 psus are being used.. Original post by alexbg21: Still no success with more than 8 AMD GPU on windows. I think kernel file makes problem, but success with 4 X 7990 and two GTX 970 plus CPU mining - all 45 Mhs on X11 !!! 8 GPU limit per windows is MYTH. This is absolutely not true!!! These days i will buy pcie expander card and will try to add three more GTX 970  In windows 8.1 i did not connect any monitor like it was it windows 7. Everithing works perfect. 8+GPU works only on GIGABYTE 990FXA-UD3 Rev. 4.0 (Revision 1.2/2.0/3.0 and GYGABYTE 990FXA-UD5 which i tested have bios issue for 8+GPU). Asrock H81PRO BTC - only 7 GPU!!! I think this board have bios bug or something like that. Till now GIGABYTE 990FXA-UD3 Rev. 4.0 is best for support multiple GPU but do not try to switch more than 10 GPU - South bridge will die !!! 2 of my board are death now, trying to switch on 11th GPU https://imageshack.com/i/exWBHEs3jhttps://imageshack.com/i/kqcGXV1Hj------------------------------------------- windows 8 gpu limit 8 gpu limit Maximum Gpus windows 8 Windows GPU limit ------------------------------------------- As i understood problem is in these two files: amdkmdag.sys c:\windows\system32\drivers\atikmdag.sys amdkmdap.sys c:\windows\system32\drivers\atikmdap.sys Yes - 4x 7990 and 2x750ti |
|
|
|
|
jambo110
Legendary
Offline
Activity: 1311
Merit: 1003
|
|
August 16, 2015, 12:03:11 PM |
|
having a good read in here, very interesting.
|
|
|
|
|
|
Lazada
|
|
August 16, 2015, 02:24:39 PM |
|
i have a very much this coin
|
|
|
|
|
|
Foss
|
|
August 17, 2015, 08:36:04 PM |
|
Can someone help me with a config for AMD 7950 for Lyra2REv2
+1 @echo off setx GPU_MAX_ALLOC_PERCENT 100 sgminer.exe --algorithm Lyra2REv2 -o stratum+tcp://lyra2rev2.eu.nicehash.com:3347 -u 1M948TedPdVkbk59TMnYJhtW5BFTXKPfFL -p d=4.0 -d 0 --xintensity 256 -w 64 -g 2 --gpu-engine 1100 --gpu-memclock 1500 --gpu-powertune 20 --gpu-fan 50 pause |
BTC: 147kwy3LndX6jkwGC3mU9j6rZMWU8g1Amd
DASH: XhR4V6ChnQp7LDWhpArwBMXARxU5LGiq8a
ETH: 0xe4b10dff72b58a363a3c8b70e21cfb236e2697c9
|
|
|
chrysophylax
Legendary
Offline
Activity: 2814
Merit: 1091
--- ChainWorks Industries ---
|
|
August 18, 2015, 12:13:09 AM |
|
Can someone help me with a config for AMD 7950 for Lyra2REv2
+1 @echo off setx GPU_MAX_ALLOC_PERCENT 100 sgminer.exe --algorithm Lyra2REv2 -o stratum+tcp://lyra2rev2.eu.nicehash.com:3347 -u 1M948TedPdVkbk59TMnYJhtW5BFTXKPfFL -p d=4.0 -d 0 --xintensity 256 -w 64 -g 2 --gpu-engine 1100 --gpu-memclock 1500 --gpu-powertune 20 --gpu-fan 50 pause and if you mine at givemecoins - dont forget the --difficulty-multiplier 2 at the end of that ... otherwise you will get a lot of rejects with 'above hash' ... #crysx |
|
|
|
|
cidman
|
|
August 18, 2015, 06:15:08 AM |
|
Can someone help me with a config for AMD 7950 for Lyra2REv2
+1 @echo off setx GPU_MAX_ALLOC_PERCENT 100 sgminer.exe --algorithm Lyra2REv2 -o stratum+tcp://lyra2rev2.eu.nicehash.com:3347 -u 1M948TedPdVkbk59TMnYJhtW5BFTXKPfFL -p d=4.0 -d 0 --xintensity 256 -w 64 -g 2 --gpu-engine 1100 --gpu-memclock 1500 --gpu-powertune 20 --gpu-fan 50 pause im looking for the sgminer with lyre2rev2 kernel and cant find it |
|
|
|
|
|
