bullus
|
|
July 16, 2014, 10:16:45 PM |
|
Thanks , max temps are about 75degrees.
I had some problems with nist5, never above 14mh/s , but saw platinums config using -I 16 and that was the solution.
it appears 5.8mh/s is the top i am gonna get with my 290x at the same clocks but i had to bump the work size up to 256 to get than tried 64 like you had and my hash rate dropped to 5.3 from 5.7 at 128 this is on my second card (the one that isn't maxed out on temp) That's correct, for x11 I used another bin from another miner. With your sgminer I max out at 5.8mh/s and with the other 6050kh/s I upload the darcoin bin for u to test. darkcoin-modHawaiigw64l4 https://mega.co.nz/#!aZ82WJrC!P-8BmNPPrwf7TylKKb7kYa86tdHSvK6RWIsHSOcgV5Asgminer 4.2.2-254-gfdd4 - Started: [2014-07-17 00:12:30] - [0 days 00:09:39] ---------------------------------------------------------------------------- (5s):6.039M (avg):5.958Mh/s | A:0 R:0 HW:0 WU:0.086/m ST: 0 SS: 0 NB: 19 LW: 474 GF: 1 RF: 0 Connected to am02 x11 (stratum) diff 0.010 as user xxx Block: 8435f42e... Diff:3.35K Started: [00:21:54] Best share: 0.300 ---------------------------------------------------------------------------- [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit GPU 0: 76.0C 80% | 6.034M/6.012Mh/s | R: 0.0% HW:0 WU:0.088/m I:16 ---------------------------------------------------------------------------- [00:21:11] Accepted Coin 611 Diff 0.071/0.010 GPU 0 at am02 x11 [00:21:14] Accepted Coin 3360 Diff 0.020/0.010 GPU 0 at am02 x11 [00:21:15] Accepted Coin 3360 Diff 0.013/0.010 GPU 0 at am02 x11 [00:21:16] Accepted Coin 3360 Diff 0.087/0.010 GPU 0 at am02 x11 [00:21:32] Accepted Coin 3360 Diff 0.013/0.010 GPU 0 at am02 x11 [00:21:35] Accepted Coin 3360 Diff 0.029/0.010 GPU 0 at am02 x11 [00:21:40] Accepted Coin 3360 Diff 0.032/0.010 GPU 0 at am02 x11 [00:21:43] Accepted Coin 3360 Diff 0.018/0.010 GPU 0 at am02 x11 [00:21:45] Accepted Coin 3360 Diff 0.101/0.010 GPU 0 at am02 x11 [00:21:56] Accepted Coin 3345 Diff 0.043/0.010 GPU 0 at am02 x11 [00:21:56] Accepted Coin 3345 Diff 0.046/0.010 GPU 0 at am02 x11 [00:21:56] Accepted Coin 3345 Diff 0.055/0.010 GPU 0 at am02 x11 [00:22:02] Accepted Coin 3345 Diff 0.047/0.010 GPU 0 at am02 x11
|
btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
|
|
|
badman74
|
|
July 16, 2014, 10:26:24 PM |
|
Thanks , max temps are about 75degrees.
I had some problems with nist5, never above 14mh/s , but saw platinums config using -I 16 and that was the solution.
it appears 5.8mh/s is the top i am gonna get with my 290x at the same clocks but i had to bump the work size up to 256 to get than tried 64 like you had and my hash rate dropped to 5.3 from 5.7 at 128 this is on my second card (the one that isn't maxed out on temp) That's correct, for x11 I used another bin from another miner. With your sgminer I max out at 5.8mh/s and with the other 6050kh/s I upload the darcoin bin for u to test. darkcoin-modHawaiigw64l4 https://mega.co.nz/#!aZ82WJrC!P-8BmNPPrwf7TylKKb7kYa86tdHSvK6RWIsHSOcgV5Asgminer 4.2.2-254-gfdd4 - Started: [2014-07-17 00:12:30] - [0 days 00:09:39] ---------------------------------------------------------------------------- (5s):6.039M (avg):5.958Mh/s | A:0 R:0 HW:0 WU:0.086/m ST: 0 SS: 0 NB: 19 LW: 474 GF: 1 RF: 0 Connected to am02 x11 (stratum) diff 0.010 as user xxx Block: 8435f42e... Diff:3.35K Started: [00:21:54] Best share: 0.300 ---------------------------------------------------------------------------- [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit GPU 0: 76.0C 80% | 6.034M/6.012Mh/s | R: 0.0% HW:0 WU:0.088/m I:16 ---------------------------------------------------------------------------- [00:21:11] Accepted Coin 611 Diff 0.071/0.010 GPU 0 at am02 x11 [00:21:14] Accepted Coin 3360 Diff 0.020/0.010 GPU 0 at am02 x11 [00:21:15] Accepted Coin 3360 Diff 0.013/0.010 GPU 0 at am02 x11 [00:21:16] Accepted Coin 3360 Diff 0.087/0.010 GPU 0 at am02 x11 [00:21:32] Accepted Coin 3360 Diff 0.013/0.010 GPU 0 at am02 x11 [00:21:35] Accepted Coin 3360 Diff 0.029/0.010 GPU 0 at am02 x11 [00:21:40] Accepted Coin 3360 Diff 0.032/0.010 GPU 0 at am02 x11 [00:21:43] Accepted Coin 3360 Diff 0.018/0.010 GPU 0 at am02 x11 [00:21:45] Accepted Coin 3360 Diff 0.101/0.010 GPU 0 at am02 x11 [00:21:56] Accepted Coin 3345 Diff 0.043/0.010 GPU 0 at am02 x11 [00:21:56] Accepted Coin 3345 Diff 0.046/0.010 GPU 0 at am02 x11 [00:21:56] Accepted Coin 3345 Diff 0.055/0.010 GPU 0 at am02 x11 [00:22:02] Accepted Coin 3345 Diff 0.047/0.010 GPU 0 at am02 x11 nice up and running at 6.02mh/s which miner version gives that bin?
|
|
|
|
bullus
|
|
July 16, 2014, 10:31:05 PM |
|
Thanks , max temps are about 75degrees.
I had some problems with nist5, never above 14mh/s , but saw platinums config using -I 16 and that was the solution.
it appears 5.8mh/s is the top i am gonna get with my 290x at the same clocks but i had to bump the work size up to 256 to get than tried 64 like you had and my hash rate dropped to 5.3 from 5.7 at 128 this is on my second card (the one that isn't maxed out on temp) That's correct, for x11 I used another bin from another miner. With your sgminer I max out at 5.8mh/s and with the other 6050kh/s I upload the darcoin bin for u to test. darkcoin-modHawaiigw64l4 https://mega.co.nz/#!aZ82WJrC!P-8BmNPPrwf7TylKKb7kYa86tdHSvK6RWIsHSOcgV5Asgminer 4.2.2-254-gfdd4 - Started: [2014-07-17 00:12:30] - [0 days 00:09:39] ---------------------------------------------------------------------------- (5s):6.039M (avg):5.958Mh/s | A:0 R:0 HW:0 WU:0.086/m ST: 0 SS: 0 NB: 19 LW: 474 GF: 1 RF: 0 Connected to am02 x11 (stratum) diff 0.010 as user xxx Block: 8435f42e... Diff:3.35K Started: [00:21:54] Best share: 0.300 ---------------------------------------------------------------------------- [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit GPU 0: 76.0C 80% | 6.034M/6.012Mh/s | R: 0.0% HW:0 WU:0.088/m I:16 ---------------------------------------------------------------------------- [00:21:11] Accepted Coin 611 Diff 0.071/0.010 GPU 0 at am02 x11 [00:21:14] Accepted Coin 3360 Diff 0.020/0.010 GPU 0 at am02 x11 [00:21:15] Accepted Coin 3360 Diff 0.013/0.010 GPU 0 at am02 x11 [00:21:16] Accepted Coin 3360 Diff 0.087/0.010 GPU 0 at am02 x11 [00:21:32] Accepted Coin 3360 Diff 0.013/0.010 GPU 0 at am02 x11 [00:21:35] Accepted Coin 3360 Diff 0.029/0.010 GPU 0 at am02 x11 [00:21:40] Accepted Coin 3360 Diff 0.032/0.010 GPU 0 at am02 x11 [00:21:43] Accepted Coin 3360 Diff 0.018/0.010 GPU 0 at am02 x11 [00:21:45] Accepted Coin 3360 Diff 0.101/0.010 GPU 0 at am02 x11 [00:21:56] Accepted Coin 3345 Diff 0.043/0.010 GPU 0 at am02 x11 [00:21:56] Accepted Coin 3345 Diff 0.046/0.010 GPU 0 at am02 x11 [00:21:56] Accepted Coin 3345 Diff 0.055/0.010 GPU 0 at am02 x11 [00:22:02] Accepted Coin 3345 Diff 0.047/0.010 GPU 0 at am02 x11 nice up and running at 6.02mh/s which miner version gives that bin? I think this one https://bitcointalk.org/index.php?topic=669806.0file was called X15_AMD, but the x13/x15/nist5 were lower hashrates Do u need the cl-file?
|
btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
|
|
|
badman74
|
|
July 16, 2014, 10:33:38 PM |
|
Thanks , max temps are about 75degrees.
I had some problems with nist5, never above 14mh/s , but saw platinums config using -I 16 and that was the solution.
it appears 5.8mh/s is the top i am gonna get with my 290x at the same clocks but i had to bump the work size up to 256 to get than tried 64 like you had and my hash rate dropped to 5.3 from 5.7 at 128 this is on my second card (the one that isn't maxed out on temp) That's correct, for x11 I used another bin from another miner. With your sgminer I max out at 5.8mh/s and with the other 6050kh/s I upload the darcoin bin for u to test. darkcoin-modHawaiigw64l4 https://mega.co.nz/#!aZ82WJrC!P-8BmNPPrwf7TylKKb7kYa86tdHSvK6RWIsHSOcgV5Asgminer 4.2.2-254-gfdd4 - Started: [2014-07-17 00:12:30] - [0 days 00:09:39] ---------------------------------------------------------------------------- (5s):6.039M (avg):5.958Mh/s | A:0 R:0 HW:0 WU:0.086/m ST: 0 SS: 0 NB: 19 LW: 474 GF: 1 RF: 0 Connected to am02 x11 (stratum) diff 0.010 as user xxx Block: 8435f42e... Diff:3.35K Started: [00:21:54] Best share: 0.300 ---------------------------------------------------------------------------- [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit GPU 0: 76.0C 80% | 6.034M/6.012Mh/s | R: 0.0% HW:0 WU:0.088/m I:16 ---------------------------------------------------------------------------- [00:21:11] Accepted Coin 611 Diff 0.071/0.010 GPU 0 at am02 x11 [00:21:14] Accepted Coin 3360 Diff 0.020/0.010 GPU 0 at am02 x11 [00:21:15] Accepted Coin 3360 Diff 0.013/0.010 GPU 0 at am02 x11 [00:21:16] Accepted Coin 3360 Diff 0.087/0.010 GPU 0 at am02 x11 [00:21:32] Accepted Coin 3360 Diff 0.013/0.010 GPU 0 at am02 x11 [00:21:35] Accepted Coin 3360 Diff 0.029/0.010 GPU 0 at am02 x11 [00:21:40] Accepted Coin 3360 Diff 0.032/0.010 GPU 0 at am02 x11 [00:21:43] Accepted Coin 3360 Diff 0.018/0.010 GPU 0 at am02 x11 [00:21:45] Accepted Coin 3360 Diff 0.101/0.010 GPU 0 at am02 x11 [00:21:56] Accepted Coin 3345 Diff 0.043/0.010 GPU 0 at am02 x11 [00:21:56] Accepted Coin 3345 Diff 0.046/0.010 GPU 0 at am02 x11 [00:21:56] Accepted Coin 3345 Diff 0.055/0.010 GPU 0 at am02 x11 [00:22:02] Accepted Coin 3345 Diff 0.047/0.010 GPU 0 at am02 x11 nice up and running at 6.02mh/s which miner version gives that bin? I think this one https://bitcointalk.org/index.php?topic=669806.0file was called X15_AMD Do u need the cl-file? i wanna look to see if i can figure out what the difference is
|
|
|
|
bullus
|
|
July 16, 2014, 10:35:34 PM |
|
|
btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
|
|
|
badman74
|
|
July 16, 2014, 11:02:16 PM |
|
hmm dropping that .cl in my windows miner worked fine but my pimp miner did not like it trying to get the already built bin over there now to see if it will work
|
|
|
|
bullus
|
|
July 16, 2014, 11:05:28 PM |
|
hmm dropping that .cl in my windows miner worked fine but my pimp miner did not like it trying to get the already built bin over there now to see if it will work Are u also updating ur github sgminer_v5 for windows from ur signature? U can't find any differences?
|
btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
|
|
|
badman74
|
|
July 16, 2014, 11:10:13 PM Last edit: July 17, 2014, 03:53:52 AM by badman74 |
|
hmm dropping that .cl in my windows miner worked fine but my pimp miner did not like it trying to get the already built bin over there now to see if it will work Are u also updating ur github sgminer_v5 for windows from ur signature? U can't find any differences? no i havent been maintaining it lately as i cant build since i broke my mingw build environment and haven't been able to fix it and there is a huge difference in size of the .cl files right off hand he is using #define SPH_KECCAK_UNROLL 1 instead of 0 and also added aes helper directly into the kenel whereas aes_helper.cl has actually been commented out of the original edit: this kernel looks closer to the nvidia x11 kernel than it does to the original amd oneedit2: ok there isnt that much different after you trim out all the extra code that is duplicated from the base algo .cl files (i.e. blake,bmw,etc...) it seems the main change must be in the Groestl portion as it fails to build the kernel if i remove that code and replace it with #include "groestl.cl" i have replaced all the other code but this and #define SPH_LUFFA_PARALLEL 1 and still get the same hash rate this also made the .cl file way smaller edit3: the extra hashes are definitely coming from the groestl algo, but i am out of time for working on it tonight. will pick up again tomorrow
|
|
|
|
Crypto_EX
Member
Offline
Activity: 70
Merit: 10
|
|
July 17, 2014, 05:21:19 AM |
|
whats wrong with this config ? sgminer keeps saying there is some error and the config file can't be used ...
{ "pools" : [ { "name" : "Scrypt", "url" : "stratum+tcp://stratum.nicehash.com:4333", "user" : "1yCntQL6PWhNzZGGbNwSFBy2YNotyma8T", "pass" : "x", "nfactor" : "10", "algorithm" : "zuikkis" "gpu-engine" : "850", "gpu-memclock" : "1250", "thread-concurrency" : "12800", }, { "name" : "Scrypt-N", "url" : "stratum+tcp://stratum.nicehash.com:4335", "user" : "1yCntQL6PWhNzZGGbNwSFBy2YNotyma8T", "pass" : "x", "nfactor" : "11", "algorithm" : "zuikkis" "gpu-engine" : "850" "gpu-memclock" : "1250", "thread-concurrency" : "12800", }, { "name" : "X11", "url" : "stratum+tcp://stratum.nicehash.com:4336", "user" : "1yCntQL6PWhNzZGGbNwSFBy2YNotyma8T", "pass" : "x", "nfactor" : "10", "algorithm" : "darkcoin-mod" }, { "name" : "X13", "url" : "stratum+tcp://stratum.nicehash.com:4337", "user" : "1yCntQL6PWhNzZGGbNwSFBy2YNotyma8T", "pass" : "x", "nfactor" : "10", "algorithm" : "marucoin-mod" }, { "name" : "Keccak", "url" : "stratum+tcp://stratum.nicehash.com:4338", "user" : "1yCntQL6PWhNzZGGbNwSFBy2YNotyma8T", "pass" : "x", "nfactor" : "10", "algorithm" : "maxcoin" }, { "name" : "X15", "url" : "stratum+tcp://stratum.nicehash.com:4339", "user" : "1yCntQL6PWhNzZGGbNwSFBy2YNotyma8T", "pass" : "x", "nfactor" : "10", "algorithm" : "bitblock" }, { "name" : "NIST5", "url" : "stratum+tcp://stratum.nicehash.com:4340", "user" : "1yCntQL6PWhNzZGGbNwSFBy2YNotyma8T", "pass" : "x", "nfactor" : "10", "algorithm" : "talkcoin-mod" }
"api-allow" : "W:127.0.0.1", "api-listen" : true, "api-port" : "4028", "expiry" : "1", "failover-only" : true, "hotplug" : "5", "log" : "5", "queue" : "0", "scan-time" : "1", "shares" : "0", "auto-fan" : true, "intensity" : "19", "gpu-engine" : "1000", "gpu-memclock" : "1300", "gpu-threads" : "4", "gpu-dyninterval" : "7", "gpu-fan" : "65", "no-restart" : true, "temp-target" : "80", "temp-overheat" : "85", "temp-cutoff" : "90", "temp-hysteresis" : "3", "worksize" : "256", "thread-concurrency" : "8192", "log-file" : "output.log", "no-client-reconnect" : true, "show-coindiff" : true, "failover-switch-delay" : "30", "hamsi-expand-big" : "1", "hamsi-short" : true, "extranonce-subscription" : true }
|
|
|
|
Crypto_EX
Member
Offline
Activity: 70
Merit: 10
|
|
July 17, 2014, 05:54:53 AM |
|
whats wrong with this config ? sgminer keeps saying there is some error and the config file can't be used ...
"thread-concurrency" : "12800", You can't end your last line before curly brackets with a hanging comma. Go here and push your configs through please http://jsonlint.com/Use the tools available from the previous 50 pages of people experiencing your similar problems... .................................... thank you it works now
|
|
|
|
Crypto_EX
Member
Offline
Activity: 70
Merit: 10
|
|
July 17, 2014, 06:46:03 AM |
|
can this application also control the voltage ?!
|
|
|
|
Crypto_EX
Member
Offline
Activity: 70
Merit: 10
|
|
July 17, 2014, 07:39:59 AM |
|
Working config for scrypt/nscrypt/x11/x13/x14/x15/keccak/nist5/qubit algos on 3x 290X (shaders 2816) rig on CGWatcher 1.4.1, W7x64 CCC 14.7RC updated with badman74's advice on temperature targets; overclocks with lower intensities to avoid driver failures; removed redundant settings, globally specified "gpu-threads" : "2", and removed redundant gpu-threads settings on relevant profiles; disabled ULPS in MSI AB; enabled unofficial overclocking without PowerPlay support in MSI AB; substituted 65KB groestl.cl in place of 67KB groestl.cl; #define SPH_LUFFA_PARALLEL 1 in darkcoin-mod.cl, marucoin-mod.cl, x14.cl, bitblock.cl; #include "aes_helper.cl" in darkcoin-mod.cl; dropped worksize to 64 like bullus; recalibrated speedfactors for nicehash password field. Hashrates:x11: 6Mx13: 4.4Mx14: 4.2Mx15: 4Mnist5: 17.7Mkeccak: 470Mscrypt: disabled nscrypt: disabled qubit: disabled fresh: disabledsgminer.conf{ "pools" : [ { "name" : "br x15 platinum4.2", "url" : "stratum+tcp://r6214.g51.rigs.eu.betarigs.com:9045", "user" : "platinumstephen-6214", "pass" : "x", "pool-priority" : "0", "profile" : "x15" }, { "name" : "hashbusters x11 test", "url" : "stratum+tcp://192.99.148.34:5555", "user" : "19VAeHKFfo91wxPhXQAEvHbkV4B2t5yRgq", "pass" : "x", "pool-priority" : "1", "profile" : "x11", "state" : "disabled" }, { "name" : "mrr nist5 platinum4.2", "url" : "http://us-central01.miningrigrentals.com:3333", "user" : "platinumstephen.5405", "pass" : "x", "pool-priority" : "2", "profile" : "nist5" }, { "name" : "mrr nist5 platinum4.2 (2)", "url" : "http://us-east01.miningrigrentals.com:3333", "user" : "platinumstephen.5405", "pass" : "x", "pool-priority" : "3", "profile" : "nist5" }, { "name" : "mrr nist5 platinum4.2 (3)", "url" : "http://us-west01.miningrigrentals.com:3333", "user" : "platinumstephen.5405", "pass" : "x", "pool-priority" : "4", "profile" : "nist5" }, { "name" : "mrr nist5 platinum4.2 (4)", "url" : "http://eu-01.miningrigrentals.com:3333", "user" : "platinumstephen.5405", "pass" : "x", "pool-priority" : "5", "profile" : "nist5" }, { "name" : "mrr nist5 platinum4.2 (5)", "url" : "http://ap-01.miningrigrentals.com:3333", "user" : "platinumstephen.5405", "pass" : "x", "pool-priority" : "6", "profile" : "nist5" }, { "name" : "nh x15 multi", "url" : "stratum+tcp://stratum.nicehash.com:4339", "user" : "19VAeHKFfo91wxPhXQAEvHbkV4B2t5yRgq", "pass" : "d=0.100;f0=2.95;f2=1.45;f3=18;f4=13.2;f5=1440;f6=12;f7=52.8;c0=2.9;c2=2.9;c3=1.8;c4=1.8;c5=2.4;c6=1.8;c7=1.6", "pool-priority" : "7", "profile" : "x15" }, { "name" : "nh x13 multi", "url" : "stratum+tcp://stratum.nicehash.com:4337", "user" : "19VAeHKFfo91wxPhXQAEvHbkV4B2t5yRgq", "pass" : "d=0.100;f0=2.95;f2=1.45;f3=18;f4=13.2;f5=1440;f6=12;f7=52.8;c0=2.9;c2=2.9;c3=1.8;c4=1.8;c5=2.4;c6=1.8;c7=1.6", "pool-priority" : "8", "profile" : "x13" }, { "name" : "nh x11 multi", "url" : "stratum+tcp://stratum.nicehash.com:4336", "user" : "19VAeHKFfo91wxPhXQAEvHbkV4B2t5yRgq", "pass" : "d=0.100;f0=2.95;f2=1.45;f3=18;f4=13.2;f5=1440;f6=12;f7=52.8;c0=2.9;c2=2.9;c3=1.8;c4=1.8;c5=2.4;c6=1.8;c7=1.6", "pool-priority" : "9", "profile" : "x11" }, { "name" : "nh nist5 multi", "url" : "stratum+tcp://stratum.nicehash.com:4340", "user" : "19VAeHKFfo91wxPhXQAEvHbkV4B2t5yRgq", "pass" : "d=0.100;f0=2.95;f2=1.45;f3=18;f4=13.2;f5=1440;f6=12;f7=52.8;c0=2.9;c2=2.9;c3=1.8;c4=1.8;c5=2.4;c6=1.8;c7=1.6", "pool-priority" : "10", "profile" : "nist5" }, { "name" : "nh keccak multi", "url" : "stratum+tcp://stratum.nicehash.com:4338", "user" : "19VAeHKFfo91wxPhXQAEvHbkV4B2t5yRgq", "pass" : "d=1024;f0=2.95;f2=1.45;f3=18;f4=13.2;f5=1440;f6=12;f7=52.8;c0=2.9;c2=2.9;c3=1.8;c4=1.8;c5=2.4;c6=1.8;c7=1.6", "pool-priority" : "11", "profile" : "keccak" }, { "name" : "nh scrypt multi", "url" : "stratum+tcp://stratum.nicehash.com:4333", "user" : "19VAeHKFfo91wxPhXQAEvHbkV4B2t5yRgq", "pass" : "d=1024;f0=2.95;f2=1.45;f3=18;f4=13.2;f5=1440;f6=12;f7=52.8;c0=2.9;c2=2.9;c3=1.8;c4=1.8;c5=2.4;c6=1.8;c7=1.6", "pool-priority" : "12", "profile" : "scrypt", "state" : "disabled" }, { "name" : "nh nscrypt multi", "url" : "stratum+tcp://stratum.nicehash.com:4335", "user" : "19VAeHKFfo91wxPhXQAEvHbkV4B2t5yRgq", "pass" : "d=512;f0=2.95;f2=1.45;f3=18;f4=13.2;f5=1440;f6=12;f7=52.8;c0=2.9;c2=2.9;c3=1.8;c4=1.8;c5=2.4;c6=1.8;c7=1.6", "pool-priority" : "13", "profile" : "scrypt", "state" : "disabled" }, { "name" : "nh x15 multi failover", "url" : "stratum+tcp://stratum.nicehash.com:3339", "user" : "19VAeHKFfo91wxPhXQAEvHbkV4B2t5yRgq", "pass" : "x", "pool-priority" : "14", "profile" : "x15" }, { "name" : "mrr x15 platinum4.2", "url" : "http://us-central01.miningrigrentals.com:3333", "user" : "platinumstephen.3982", "pass" : "x", "pool-priority" : "15", "profile" : "x15" }, { "name" : "mrr x15 platinum4.2 (2)", "url" : "http://us-east01.miningrigrentals.com:3333", "user" : "platinumstephen.3982", "pass" : "x", "pool-priority" : "16", "profile" : "x15" }, { "name" : "mrr x15 platinum4.2 (3)", "url" : "http://us-west01.miningrigrentals.com:3333", "user" : "platinumstephen.3982", "pass" : "x", "pool-priority" : "17", "profile" : "x15" }, { "name" : "mrr x15 platinum4.2 (4)", "url" : "http://eu-01.miningrigrentals.com:3333", "user" : "platinumstephen.3982", "pass" : "x", "pool-priority" : "18", "profile" : "x15" }, { "name" : "mrr x15 platinum4.2 (5)", "url" : "http://ap-01.miningrigrentals.com:3333", "user" : "platinumstephen.3982", "pass" : "x", "pool-priority" : "19", "profile" : "x15" }, { "name" : "mrr x13 platinum4.2", "url" : "http://us-central01.miningrigrentals.com:3333", "user" : "platinumstephen.1768", "pass" : "x", "pool-priority" : "20", "profile" : "x13" }, { "name" : "mrr x13 platinum4.2 (2)", "url" : "http://us-east01.miningrigrentals.com:3333", "user" : "platinumstephen.1768", "pass" : "x", "pool-priority" : "21", "profile" : "x13" }, { "name" : "mrr x13 platinum4.2 (3)", "url" : "http://us-west01.miningrigrentals.com:3333", "user" : "platinumstephen.1768", "pass" : "x", "pool-priority" : "22", "profile" : "x13" }, { "name" : "mrr x13 platinum4.2 (4)", "url" : "http://eu-01.miningrigrentals.com:3333", "user" : "platinumstephen.1768", "pass" : "x", "pool-priority" : "23", "profile" : "x13" }, { "name" : "mrr x13 platinum4.2 (5)", "url" : "http://ap-01.miningrigrentals.com:3333", "user" : "platinumstephen.1768", "pass" : "x", "pool-priority" : "24", "profile" : "x13" }, { "name" : "mrr x11 platinum4.2", "url" : "http://us-central01.miningrigrentals.com:3333", "user" : "platinumstephen.4265", "pass" : "x", "pool-priority" : "25", "profile" : "x11" }, { "name" : "mrr x11 platinum4.2 (2)", "url" : "http://us-east01.miningrigrentals.com:3333", "user" : "platinumstephen.4265", "pass" : "x", "pool-priority" : "26", "profile" : "x11" }, { "name" : "mrr x11 platinum4.2 (3)", "url" : "http://us-west01.miningrigrentals.com:3333", "user" : "platinumstephen.4265", "pass" : "x", "pool-priority" : "27", "profile" : "x11" }, { "name" : "mrr x11 platinum4.2 (4)", "url" : "http://eu-01.miningrigrentals.com:3333", "user" : "platinumstephen.4265", "pass" : "x", "pool-priority" : "28", "profile" : "x11" }, { "name" : "mrr x11 platinum4.2 (5)", "url" : "http://ap-01.miningrigrentals.com:3333", "user" : "platinumstephen.4265", "pass" : "x", "pool-priority" : "29", "profile" : "x11" }, { "name" : "hh x14", "url" : "stratum+tcp://www.hashharder.com:9672", "user" : "Xwxs3zrR8XEsFfmzQXHbioYBu7abg6dzqh", "pass" : "x", "pool-priority" : "30", "profile" : "x14" }, { "name" : "hh qubit", "url" : "stratum+tcp://www.hashharder.com:9674", "user" : "DGsGKdzJYrtHKBT2gH7UKTwP9EAi56xEfD", "pass" : "x", "pool-priority" : "31", "profile" : "qubit" } ], "api-allow" : "W:127.0.0.1", "api-listen" : true, "gpu-threads" : "2", "temp-target" : "88", "temp-overheat" : "92", "temp-cutoff" : "96", "include" : "profiles.conf" } profiles.conf{ "profiles" : [ { "name" : "x11", "algorithm" : "darkcoin-mod", "intensity" : "17", "worksize": "64", "gpu-engine": "1050", "gpu-memclock": "1500", "gpu-fan" : "80-100" }, { "name" : "x13", "algorithm" : "marucoin-mod", "intensity" : "17", "worksize": "64", "gpu-engine": "1050", "gpu-memclock": "1500", "gpu-fan" : "80-100" }, { "name" : "x14", "algorithm" : "x14", "intensity" : "17", "worksize": "64", "gpu-engine": "1050", "gpu-memclock": "1500", "gpu-fan" : "80-100" }, { "name" : "x15", "algorithm" : "bitblock", "intensity" : "17", "worksize": "64", "gpu-engine": "1050", "gpu-memclock": "1500", "gpu-fan" : "80-100" }, { "name" : "nist5", "algorithm" : "talkcoin-mod", "intensity" : "16", "worksize": "64", "gpu-engine": "1050", "gpu-memclock": "1500", "gpu-fan" : "80-100" }, { "name" : "qubit", "algorithm" : "qubitcoin", "intensity" : "21", "worksize": "256", "gpu-engine": "1020", "gpu-memclock": "1375", "gpu-fan" : "80-100" }, { "name" : "scrypt", "xintensity" : "640", "worksize" : "256", "lookup-gap" : "2", "gpu-threads": "1", "algorithm" : "alexkarnew", "nfactor" : "10", "gpu-engine" : "1000", "gpu-memclock" : "1250", "gpu-fan" : "85-100" }, { "name" : "nscrypt", "xintensity" : "320", "worksize" : "256", "lookup-gap" : "2", "gpu-threads": "1", "algorithm" : "alexkarnew", "nfactor" : "11", "gpu-engine" : "1000", "gpu-memclock" : "1250", "gpu-fan" : "85-100" }, { "name" : "keccak", "intensity" : "13", "worksize" : "256", "lookup-gap" : "2", "gpu-threads": "1", "algorithm" : "maxcoin", "gpu-engine" : "1020", "gpu-memclock" : "1375", "gpu-fan" : "85-100" } ], "expiry" : "1", "failover-only" : true, "scan-time" : "1", "auto-fan" : true, "no-restart" : true, "shaders" : "2816", "log-file" : "output.log", "no-client-reconnect" : true, "show-coindiff" : true, "failover-switch-delay" : "30", "hamsi-expand-big" : "1", "hamsi-short" : true, "extranonce-subscription" : true } This may throw some cards SICK very fast/frequently; please report back with results, and CGWatcher should have your back on SICKs. wow 6 mh/s on a 290x , i'm managing about 5 mh/s on a 290 can it go higher on catalyst 14.7 and the sgminer 5 ? clocks are 1000 core 1300 ram ...
|
|
|
|
phateminer
Newbie
Offline
Activity: 18
Merit: 0
|
|
July 17, 2014, 07:48:31 AM |
|
Working config for scrypt/nscrypt/x11/x13/x14/x15/keccak/nist5/qubit algos on 3x 290X (shaders 2816) rig on CGWatcher 1.4.1, W7x64 CCC 14.7RC updated with badman74's advice on temperature targets; overclocks with lower intensities to avoid driver failures; removed redundant settings, globally specified "gpu-threads" : "2", and removed redundant gpu-threads settings on relevant profiles; disabled ULPS in MSI AB; enabled unofficial overclocking without PowerPlay support in MSI AB; substituted 65KB groestl.cl in place of 67KB groestl.cl; #define SPH_LUFFA_PARALLEL 1 in darkcoin-mod.cl, marucoin-mod.cl, x14.cl, bitblock.cl; #include "aes_helper.cl" in darkcoin-mod.cl; dropped worksize to 64 like bullus; recalibrated speedfactors for nicehash password field. Hashrates:x11: 6Mx13: 4.4Mx14: 4.2Mx15: 4Mnist5: 17.7Mkeccak: 470Mscrypt: disabled nscrypt: disabled qubit: disabled fresh: disabledsgminer.conf{ "pools" : [ { "name" : "br x15 platinum4.2", "url" : "stratum+tcp://r6214.g51.rigs.eu.betarigs.com:9045", "user" : "platinumstephen-6214", "pass" : "x", "pool-priority" : "0", "profile" : "x15" }, { "name" : "hashbusters x11 test", "url" : "stratum+tcp://192.99.148.34:5555", "user" : "19VAeHKFfo91wxPhXQAEvHbkV4B2t5yRgq", "pass" : "x", "pool-priority" : "1", "profile" : "x11", "state" : "disabled" }, { "name" : "mrr nist5 platinum4.2", "url" : "http://us-central01.miningrigrentals.com:3333", "user" : "platinumstephen.5405", "pass" : "x", "pool-priority" : "2", "profile" : "nist5" }, { "name" : "mrr nist5 platinum4.2 (2)", "url" : "http://us-east01.miningrigrentals.com:3333", "user" : "platinumstephen.5405", "pass" : "x", "pool-priority" : "3", "profile" : "nist5" }, { "name" : "mrr nist5 platinum4.2 (3)", "url" : "http://us-west01.miningrigrentals.com:3333", "user" : "platinumstephen.5405", "pass" : "x", "pool-priority" : "4", "profile" : "nist5" }, { "name" : "mrr nist5 platinum4.2 (4)", "url" : "http://eu-01.miningrigrentals.com:3333", "user" : "platinumstephen.5405", "pass" : "x", "pool-priority" : "5", "profile" : "nist5" }, { "name" : "mrr nist5 platinum4.2 (5)", "url" : "http://ap-01.miningrigrentals.com:3333", "user" : "platinumstephen.5405", "pass" : "x", "pool-priority" : "6", "profile" : "nist5" }, { "name" : "nh x15 multi", "url" : "stratum+tcp://stratum.nicehash.com:4339", "user" : "19VAeHKFfo91wxPhXQAEvHbkV4B2t5yRgq", "pass" : "d=0.100;f0=2.95;f2=1.45;f3=18;f4=13.2;f5=1440;f6=12;f7=52.8;c0=2.9;c2=2.9;c3=1.8;c4=1.8;c5=2.4;c6=1.8;c7=1.6", "pool-priority" : "7", "profile" : "x15" }, { "name" : "nh x13 multi", "url" : "stratum+tcp://stratum.nicehash.com:4337", "user" : "19VAeHKFfo91wxPhXQAEvHbkV4B2t5yRgq", "pass" : "d=0.100;f0=2.95;f2=1.45;f3=18;f4=13.2;f5=1440;f6=12;f7=52.8;c0=2.9;c2=2.9;c3=1.8;c4=1.8;c5=2.4;c6=1.8;c7=1.6", "pool-priority" : "8", "profile" : "x13" }, { "name" : "nh x11 multi", "url" : "stratum+tcp://stratum.nicehash.com:4336", "user" : "19VAeHKFfo91wxPhXQAEvHbkV4B2t5yRgq", "pass" : "d=0.100;f0=2.95;f2=1.45;f3=18;f4=13.2;f5=1440;f6=12;f7=52.8;c0=2.9;c2=2.9;c3=1.8;c4=1.8;c5=2.4;c6=1.8;c7=1.6", "pool-priority" : "9", "profile" : "x11" }, { "name" : "nh nist5 multi", "url" : "stratum+tcp://stratum.nicehash.com:4340", "user" : "19VAeHKFfo91wxPhXQAEvHbkV4B2t5yRgq", "pass" : "d=0.100;f0=2.95;f2=1.45;f3=18;f4=13.2;f5=1440;f6=12;f7=52.8;c0=2.9;c2=2.9;c3=1.8;c4=1.8;c5=2.4;c6=1.8;c7=1.6", "pool-priority" : "10", "profile" : "nist5" }, { "name" : "nh keccak multi", "url" : "stratum+tcp://stratum.nicehash.com:4338", "user" : "19VAeHKFfo91wxPhXQAEvHbkV4B2t5yRgq", "pass" : "d=1024;f0=2.95;f2=1.45;f3=18;f4=13.2;f5=1440;f6=12;f7=52.8;c0=2.9;c2=2.9;c3=1.8;c4=1.8;c5=2.4;c6=1.8;c7=1.6", "pool-priority" : "11", "profile" : "keccak" }, { "name" : "nh scrypt multi", "url" : "stratum+tcp://stratum.nicehash.com:4333", "user" : "19VAeHKFfo91wxPhXQAEvHbkV4B2t5yRgq", "pass" : "d=1024;f0=2.95;f2=1.45;f3=18;f4=13.2;f5=1440;f6=12;f7=52.8;c0=2.9;c2=2.9;c3=1.8;c4=1.8;c5=2.4;c6=1.8;c7=1.6", "pool-priority" : "12", "profile" : "scrypt", "state" : "disabled" }, { "name" : "nh nscrypt multi", "url" : "stratum+tcp://stratum.nicehash.com:4335", "user" : "19VAeHKFfo91wxPhXQAEvHbkV4B2t5yRgq", "pass" : "d=512;f0=2.95;f2=1.45;f3=18;f4=13.2;f5=1440;f6=12;f7=52.8;c0=2.9;c2=2.9;c3=1.8;c4=1.8;c5=2.4;c6=1.8;c7=1.6", "pool-priority" : "13", "profile" : "scrypt", "state" : "disabled" }, { "name" : "nh x15 multi failover", "url" : "stratum+tcp://stratum.nicehash.com:3339", "user" : "19VAeHKFfo91wxPhXQAEvHbkV4B2t5yRgq", "pass" : "x", "pool-priority" : "14", "profile" : "x15" }, { "name" : "mrr x15 platinum4.2", "url" : "http://us-central01.miningrigrentals.com:3333", "user" : "platinumstephen.3982", "pass" : "x", "pool-priority" : "15", "profile" : "x15" }, { "name" : "mrr x15 platinum4.2 (2)", "url" : "http://us-east01.miningrigrentals.com:3333", "user" : "platinumstephen.3982", "pass" : "x", "pool-priority" : "16", "profile" : "x15" }, { "name" : "mrr x15 platinum4.2 (3)", "url" : "http://us-west01.miningrigrentals.com:3333", "user" : "platinumstephen.3982", "pass" : "x", "pool-priority" : "17", "profile" : "x15" }, { "name" : "mrr x15 platinum4.2 (4)", "url" : "http://eu-01.miningrigrentals.com:3333", "user" : "platinumstephen.3982", "pass" : "x", "pool-priority" : "18", "profile" : "x15" }, { "name" : "mrr x15 platinum4.2 (5)", "url" : "http://ap-01.miningrigrentals.com:3333", "user" : "platinumstephen.3982", "pass" : "x", "pool-priority" : "19", "profile" : "x15" }, { "name" : "mrr x13 platinum4.2", "url" : "http://us-central01.miningrigrentals.com:3333", "user" : "platinumstephen.1768", "pass" : "x", "pool-priority" : "20", "profile" : "x13" }, { "name" : "mrr x13 platinum4.2 (2)", "url" : "http://us-east01.miningrigrentals.com:3333", "user" : "platinumstephen.1768", "pass" : "x", "pool-priority" : "21", "profile" : "x13" }, { "name" : "mrr x13 platinum4.2 (3)", "url" : "http://us-west01.miningrigrentals.com:3333", "user" : "platinumstephen.1768", "pass" : "x", "pool-priority" : "22", "profile" : "x13" }, { "name" : "mrr x13 platinum4.2 (4)", "url" : "http://eu-01.miningrigrentals.com:3333", "user" : "platinumstephen.1768", "pass" : "x", "pool-priority" : "23", "profile" : "x13" }, { "name" : "mrr x13 platinum4.2 (5)", "url" : "http://ap-01.miningrigrentals.com:3333", "user" : "platinumstephen.1768", "pass" : "x", "pool-priority" : "24", "profile" : "x13" }, { "name" : "mrr x11 platinum4.2", "url" : "http://us-central01.miningrigrentals.com:3333", "user" : "platinumstephen.4265", "pass" : "x", "pool-priority" : "25", "profile" : "x11" }, { "name" : "mrr x11 platinum4.2 (2)", "url" : "http://us-east01.miningrigrentals.com:3333", "user" : "platinumstephen.4265", "pass" : "x", "pool-priority" : "26", "profile" : "x11" }, { "name" : "mrr x11 platinum4.2 (3)", "url" : "http://us-west01.miningrigrentals.com:3333", "user" : "platinumstephen.4265", "pass" : "x", "pool-priority" : "27", "profile" : "x11" }, { "name" : "mrr x11 platinum4.2 (4)", "url" : "http://eu-01.miningrigrentals.com:3333", "user" : "platinumstephen.4265", "pass" : "x", "pool-priority" : "28", "profile" : "x11" }, { "name" : "mrr x11 platinum4.2 (5)", "url" : "http://ap-01.miningrigrentals.com:3333", "user" : "platinumstephen.4265", "pass" : "x", "pool-priority" : "29", "profile" : "x11" }, { "name" : "hh x14", "url" : "stratum+tcp://www.hashharder.com:9672", "user" : "Xwxs3zrR8XEsFfmzQXHbioYBu7abg6dzqh", "pass" : "x", "pool-priority" : "30", "profile" : "x14" }, { "name" : "hh qubit", "url" : "stratum+tcp://www.hashharder.com:9674", "user" : "DGsGKdzJYrtHKBT2gH7UKTwP9EAi56xEfD", "pass" : "x", "pool-priority" : "31", "profile" : "qubit" } ], "api-allow" : "W:127.0.0.1", "api-listen" : true, "gpu-threads" : "2", "temp-target" : "88", "temp-overheat" : "92", "temp-cutoff" : "96", "include" : "profiles.conf" } profiles.conf{ "profiles" : [ { "name" : "x11", "algorithm" : "darkcoin-mod", "intensity" : "17", "worksize": "64", "gpu-engine": "1050", "gpu-memclock": "1500", "gpu-fan" : "80-100" }, { "name" : "x13", "algorithm" : "marucoin-mod", "intensity" : "17", "worksize": "64", "gpu-engine": "1050", "gpu-memclock": "1500", "gpu-fan" : "80-100" }, { "name" : "x14", "algorithm" : "x14", "intensity" : "17", "worksize": "64", "gpu-engine": "1050", "gpu-memclock": "1500", "gpu-fan" : "80-100" }, { "name" : "x15", "algorithm" : "bitblock", "intensity" : "17", "worksize": "64", "gpu-engine": "1050", "gpu-memclock": "1500", "gpu-fan" : "80-100" }, { "name" : "nist5", "algorithm" : "talkcoin-mod", "intensity" : "16", "worksize": "64", "gpu-engine": "1050", "gpu-memclock": "1500", "gpu-fan" : "80-100" }, { "name" : "qubit", "algorithm" : "qubitcoin", "intensity" : "21", "worksize": "256", "gpu-engine": "1020", "gpu-memclock": "1375", "gpu-fan" : "80-100" }, { "name" : "scrypt", "xintensity" : "640", "worksize" : "256", "lookup-gap" : "2", "gpu-threads": "1", "algorithm" : "alexkarnew", "nfactor" : "10", "gpu-engine" : "1000", "gpu-memclock" : "1250", "gpu-fan" : "85-100" }, { "name" : "nscrypt", "xintensity" : "320", "worksize" : "256", "lookup-gap" : "2", "gpu-threads": "1", "algorithm" : "alexkarnew", "nfactor" : "11", "gpu-engine" : "1000", "gpu-memclock" : "1250", "gpu-fan" : "85-100" }, { "name" : "keccak", "intensity" : "13", "worksize" : "256", "lookup-gap" : "2", "gpu-threads": "1", "algorithm" : "maxcoin", "gpu-engine" : "1020", "gpu-memclock" : "1375", "gpu-fan" : "85-100" } ], "expiry" : "1", "failover-only" : true, "scan-time" : "1", "auto-fan" : true, "no-restart" : true, "shaders" : "2816", "log-file" : "output.log", "no-client-reconnect" : true, "show-coindiff" : true, "failover-switch-delay" : "30", "hamsi-expand-big" : "1", "hamsi-short" : true, "extranonce-subscription" : true } This may throw some cards SICK very fast/frequently; please report back with results, and CGWatcher should have your back on SICKs. what version of the miner is this? preferably compiled for windows if you can mate. thanks!
|
|
|
|
bullus
|
|
July 17, 2014, 08:47:12 AM |
|
Nice, I don't have sick card, running for 10hours now.
I see u get about 200kh/s more with x13/x15, is it because of your higher memclock or because u change the cl for x13/x15? Otherwise can upload u your bin or cl?
|
btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
|
|
|
platinum4
|
|
July 17, 2014, 08:49:48 AM |
|
Nice, I don't have sick card, running for 10hours now.
I see u get about 200kh/s more with x13/x15, is it because of your higher memclock or because u change the cl for x13/x15? Otherwise can upload u your bin or cl?
I really wish I knew, I changed so much shit in the last 4 hours, I'm trying to find a stable rock before I go to sleep. At 1050/1500 it ran but shit on itself when flipped algos; near the same for 1040/1400. 1040/1300 works on 2 rigs solid, but not 3rd. 1040/1300 and removing "disable ULPS" in MSI AB will not get you superhigh 5.9-6M hashrate, more like 5.6, but at least drivers hold. It may have to do with MSI AB. I don't think it's LUFFA... I got the idea to sub the smaller groestl.cl in the folder, since all x[n] algos call for it, and it's the one that is most impacted by 14.6+ There's practically no change, except for lack of whitespacing in the .cl file, which makes it smaller. All these .bins were built with the linked miner, from the 12th, so should be able to replicate; these weren't .bins yanked from aznboy84's miner.
|
|
|
|
demo300
Newbie
Offline
Activity: 2
Merit: 0
|
|
July 17, 2014, 08:53:26 AM |
|
whats wrong with this config ? sgminer keeps saying there is some error and the config file can't be used ...
{ "pools" : [ { "name" : "Scrypt", "url" : "stratum+tcp://stratum.nicehash.com:4333", "user" : "1yCntQL6PWhNzZGGbNwSFBy2YNotyma8T", "pass" : "x", "nfactor" : "10", "algorithm" : "zuikkis" "gpu-engine" : "850", "gpu-memclock" : "1250", "thread-concurrency" : "12800", }, { "name" : "Scrypt-N", "url" : "stratum+tcp://stratum.nicehash.com:4335", "user" : "1yCntQL6PWhNzZGGbNwSFBy2YNotyma8T", "pass" : "x", "nfactor" : "11", "algorithm" : "zuikkis" "gpu-engine" : "850" "gpu-memclock" : "1250", "thread-concurrency" : "12800", }, { "name" : "X11", "url" : "stratum+tcp://stratum.nicehash.com:4336", "user" : "1yCntQL6PWhNzZGGbNwSFBy2YNotyma8T", "pass" : "x", "nfactor" : "10", "algorithm" : "darkcoin-mod" }, { "name" : "X13", "url" : "stratum+tcp://stratum.nicehash.com:4337", "user" : "1yCntQL6PWhNzZGGbNwSFBy2YNotyma8T", "pass" : "x", "nfactor" : "10", "algorithm" : "marucoin-mod" }, { "name" : "Keccak", "url" : "stratum+tcp://stratum.nicehash.com:4338", "user" : "1yCntQL6PWhNzZGGbNwSFBy2YNotyma8T", "pass" : "x", "nfactor" : "10", "algorithm" : "maxcoin" }, { "name" : "X15", "url" : "stratum+tcp://stratum.nicehash.com:4339", "user" : "1yCntQL6PWhNzZGGbNwSFBy2YNotyma8T", "pass" : "x", "nfactor" : "10", "algorithm" : "bitblock" }, { "name" : "NIST5", "url" : "stratum+tcp://stratum.nicehash.com:4340", "user" : "1yCntQL6PWhNzZGGbNwSFBy2YNotyma8T", "pass" : "x", "nfactor" : "10", "algorithm" : "talkcoin-mod" }
"api-allow" : "W:127.0.0.1", "api-listen" : true, "api-port" : "4028", "expiry" : "1", "failover-only" : true, "hotplug" : "5", "log" : "5", "queue" : "0", "scan-time" : "1", "shares" : "0", "auto-fan" : true, "intensity" : "19", "gpu-engine" : "1000", "gpu-memclock" : "1300", "gpu-threads" : "4", "gpu-dyninterval" : "7", "gpu-fan" : "65", "no-restart" : true, "temp-target" : "80", "temp-overheat" : "85", "temp-cutoff" : "90", "temp-hysteresis" : "3", "worksize" : "256", "thread-concurrency" : "8192", "log-file" : "output.log", "no-client-reconnect" : true, "show-coindiff" : true, "failover-switch-delay" : "30", "hamsi-expand-big" : "1", "hamsi-short" : true, "extranonce-subscription" : true }
you missed some commas (,) in your conf
|
|
|
|
bullus
|
|
July 17, 2014, 09:05:31 AM |
|
Nice, I don't have sick card, running for 10hours now.
I see u get about 200kh/s more with x13/x15, is it because of your higher memclock or because u change the cl for x13/x15? Otherwise can upload u your bin or cl?
I really wish I knew, I changed so much shit in the last 4 hours, I'm trying to find a stable rock before I go to sleep. At 1050/1500 it ran but shit on itself when flipped algos; near the same for 1040/1400. 1040/1300 works on 2 rigs solid, but not 3rd. 1040/1300 and removing "disable ULPS" in MSI AB will not get you superhigh 5.9-6M hashrate, more like 5.6, but at least drivers hold. It may have to do with MSI AB. I don't think it's LUFFA... I got the idea to sub the smaller groestl.cl in the folder, since all x[n] algos call for it, and it's the one that is most impacted by 14.6+ There's practically no change, except for lack of whitespacing in the .cl file, which makes it smaller. All these .bins were built with the linked miner, from the 12th, so should be able to replicate; these weren't .bins yanked from aznboy84's miner. Thanks, gonna test the linked sgminer and see what hashrates i get.
|
btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
|
|
|
platinum4
|
|
July 17, 2014, 09:09:42 AM |
|
So I disabled Unofficial Overclocking, and disabled ULPS in MSI AB; and rigs seem to be stable beyond 15mins.
I'm passing out for a bit but I won't be surprised if I wake up to some hung rigs.
|
|
|
|
pyds1977
Newbie
Offline
Activity: 61
Merit: 0
|
|
July 17, 2014, 11:27:05 AM |
|
[HELP AGAIN] Mining X11 or x13? What do you guys think? which one is better for ROI? Which version is better? sgminer v4.1 or v5.0?
|
|
|
|
platinum4
|
|
July 17, 2014, 11:58:29 AM |
|
[HELP AGAIN] Mining X11 or x13? What do you guys think? which one is better for ROI? Which version is better? sgminer v4.1 or v5.0?
lol
|
|
|
|
|