Claymore's CryptoNote AMD GPU Miner v11.3

[kiffner]

yes it's normal, because pool adjust difficulty to your miner to get 1 share every XX seconds. what does the pool say, is your hashrate more or less correct?

[kirilvvbg]

Guys, any ideas why I get the following message?

cannot find block data:
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"},"result":null}
cannot convert blob data

[shadowhlohavec]

yes it's normal, because pool adjust difficulty to your miner to get 1 share every XX seconds. what does the pool say, is your hashrate more or less correct?

In miner I can see hash rate around 1450 - 1550 H/s

But on bip.ms-pool.net.ua It varies from 800 - 2500... It's strange... I have mined only 4.7 bip in 4 hours, I will run it fer a few days and will see the real earnings, but I'm not sure if the miner is working properly

[kiffner]

yes it's normal, because pool adjust difficulty to your miner to get 1 share every XX seconds. what does the pool say, is your hashrate more or less correct?

In miner I can see hash rate around 1450 - 1550 H/s

But on bip.ms-pool.net.ua It varies from 800 - 2500... It's strange... I have mined only 4.7 bip in 4 hours, I will run it fer a few days and will see the real earnings, but I'm not sure if the miner is working properly

maybe you should move this debate to bipcoin thread....

[lodcomm]

Hello Folks,

I see reference in several places to a linux_64 version of this miner.. anyone have a link or url for the linux version?

thanks

-t

[CoM1ner]

Guys, any ideas why I get the following message?

cannot find block data:
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"},"result":null}
cannot convert blob data

I returned everything back to stock settings and it stopped. Dunno Whats going on.

[anakbaru]

Guys, any ideas why I get the following message?

cannot find block data:
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"},"result":null}
cannot convert blob data

I returned everything back to stock settings and it stopped. Dunno Whats going on.

maybe because overclock and big raw intesity
sometime same card even with same memory not have same quality, so you can give them same setting.
for example i have 2 powercolor RD RX 480 8 GB, 1 card suitable with 2180 Memory Setting and 512 raw intesity, the other just 2130 Memory Setting and 508 raw intesity.   

[Cubirez]

Hello Folks,

I see reference in several places to a linux_64 version of this miner.. anyone have a link or url for the linux version?

thanks

-t

AFAIK there is no "new" linux version of this miner, last one being 9.1.
You can also check sgminer-GM or wolf's miner which both work under linux and that are performance-wise more or less on par with Claymore's 9.7.

[xneoenx]

Guys, any ideas why I get the following message?

cannot find block data:
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"},"result":null}
cannot convert blob data

I returned everything back to stock settings and it stopped. Dunno Whats going on.

maybe because overclock and big raw intesity
sometime same card even with same memory not have same quality, so you can give them same setting.
for example i have 2 powercolor RD RX 480 8 GB, 1 card suitable with 2180 Memory Setting and 512 raw intesity, the other just 2130 Memory Setting and 508 raw intesity.   

And could / may also be pool dependant. I get low difficulty share when I have overclocked or undervolted too much.

[Redcard]

Hello guys,
I tried today the Claymore's CryptoNote GPU Miner v9.7 for first time and I get the following error:


Remote management (READ-ONLY MODE) is enabled on port 3333
10:28:48:915   1b04   DevFee: Stratum - connecting to 'xmr.crypto-pool.fr' <212.129.44.157> port 3333 (unsecure)
10:28:48:978   2e80   send: {"method": "login", "params": {"login": "4GdoN7NCTi8a5gZug7PrwZNKjvHFmKeV11L6pNJPgj5QNEHsN6eeX3DaAQFwZ1ufD4LYCZKArktt113 W7QjWvQ7CWFNeDcn", "pass": "x", "agent": "xmr/1.0"}, "id": 1}

10:28:48:978   2e80   Stratum - Connected (unsecure)
10:28:48:978   2e80   New connection: reset total hashes counters
10:28:49:062   2e80   got 100 bytes
10:28:49:062   2e80   buf: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalid address or username used for login"}}

10:28:49:062   2e80   parse packet: 94
10:28:49:062   2e80   Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressorusernameusedforlogin"}}
10:28:49:077   2e80   buf was cleared
10:28:49:077   2e80   Stratum - reading socket failed 10038, disconnect
10:28:49:077   2e80    Job timeout, disconnect, retry in 20 sec...


As username I use xmr address generated in Kraken but why the miner doesn't accept it??

[carlo_0000]

did you submit share to pool?

i think it s just devfee what is not working, so you can ignore this

[Redcard]

After switch to dwarfpool it's working... with the same wallet addr and without ssl support.

[rinus]

Hey guys

I want to start mining right away but don't know what hardware to buy. Budget about 1800 to 2000 euro. Want SS much as hashes as possible. Can somebody please advise

[carlo_0000]

good choice is rx470 or480  depending on what price you get them
but better of with a 5x ring than 6x  for my experience

[rinus]

good choice is rx470 or480  depending on what price you get them
but better of with a 5x ring than 6x  for my experience

5x ring? What do u mean. What is the hashrate on 470 and 480? Also is there a big difference in hashrate between brands off the 470 or 480

[Redcard]

While using this miner I noticed the fan speed of the main card(rx 470) suddenly jumped to 100%! WTF??

[Ursul0]

While using this miner I noticed the fan speed of the main card(rx 470) suddenly jumped to 100%! WTF??

I'd say its a driver bug. however I have it only in sgminer. I use mostly 16.9.2 and never seen it on claymore, but on sgminer I get it all the time on all the rigs I tested

EDIT: some weird combination of XMR algo code and drivers

[Ursul0]

good choice is rx470 or480  depending on what price you get them
but better of with a 5x ring than 6x  for my experience

5x ring? What do u mean. What is the hashrate on 470 and 480? Also is there a big difference in hashrate between brands off the 470 or 480

buy 470's Nitros, if it exists with samsung mem and you can get it = the best possible. No need for 8gig
another option is 470 refs (those do come with samsung memory sometimes) for me these work better than 480

[Redcard]

While using this miner I noticed the fan speed of the main card(rx 470) suddenly jumped to 100%! WTF??

I'd say its a driver bug. however I have it only in sgminer. I use mostly 16.9.2 and never seen it on claymore, but on sgminer I get it all the time on all the rigs I tested

EDIT: some weird combination of XMR algo code and drivers

In addition to this problem is I'm not able to fix the crazy fan at normal speed unless I reset the system.
And after one amd driver crash and and reboot the driver has changed from 16.10.3 to 16.6.. but this is another issue.

[Ursul0]

While using this miner I noticed the fan speed of the main card(rx 470) suddenly jumped to 100%! WTF??

I'd say its a driver bug. however I have it only in sgminer. I use mostly 16.9.2 and never seen it on claymore, but on sgminer I get it all the time on all the rigs I tested

EDIT: some weird combination of XMR algo code and drivers

In addition to this problem is I'm not able to fix the crazy fan at normal speed unless I reset the system.
And after one amd driver crash and and reboot the driver has changed from 16.10.3 to 16.6.. but this is another issue.

same here, only the reboot solves this crazy run... it shows over 5000RPM on refs.