Claymore's CryptoNote AMD GPU Miner v11.3

[ysakay]

setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe
-o ssl://xmr-eu1.nanopool.org:14433
-u
437gzZXn343Bc9kaxG4mzriUzcdhk4rSJTwUeCwZdQbCHWfUZu2nkryWbwaVe4vUMveKAzAiA4j8xgU i29TpKXpm41zoVan.1/ysakay@gmail.com
-p z
-ftime 1
-a 1


that's my bat file. ı have some problems.

- i can't see on nanopool when i check my adress. I started 30 min ago.
- on the miner Windows, all gpus and fans are 0.
- cannot convert blob data
how can i fix this? i have 6 rx 480 and i get 4200 h/s.

[1715307471]

1715307471

[1715307471]

1715307471

[Saphire]

Hello,
these values are normal for 6x RX580 Cards ?

[cyz0325]

Why not see  GPU  temperature  and  fans?

[climbingfool]

Does this have support for NVidia graphics cards? I'm having trouble finding the answer as the original read me says its AMD specific.
Also is it compatible with Ubuntu 16.04?

Thanks a ton in advance

[ayiphelmy]

setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe
-o ssl://xmr-eu1.nanopool.org:14433
-u
437gzZXn343Bc9kaxG4mzriUzcdhk4rSJTwUeCwZdQbCHWfUZu2nkryWbwaVe4vUMveKAzAiA4j8xgU i29TpKXpm41zoVan.1/ysakay@gmail.com
-p z
-ftime 1
-a 1


that's my bat file. ı have some problems.

- i can't see on nanopool when i check my adress. I started 30 min ago.
- on the miner Windows, all gpus and fans are 0.
- cannot convert blob data
how can i fix this? i have 6 rx 480 and i get 4200 h/s.

setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe
-o ssl://xmr-eu1.nanopool.org:14433
-u 437gzZXn343Bc9kaxG4mzriUzcdhk4rSJTwUeCwZdQbCHWfUZu2nkryWbwaVe4vUMveKAzAiA4j8xgU i29TpKXpm41zoVan.1/ysakay@gmail.com <<<<<< fix this
-p z
-ftime 1
-a 1


that's my bat file. ı have some problems.

- i can't see on nanopool when i check my adress. I started 30 min ago.
- on the miner Windows, all gpus and fans are 0.
- cannot convert blob data
how can i fix this? i have 6 rx 480 and i get 4200 h/s.

[notbatman]

Does this have support for NVidia graphics cards? I'm having trouble finding the answer as the original read me says its AMD specific.
Also is it compatible with Ubuntu 16.04?

Thanks a ton in advance

No and no, I'm currently trying to compile wolf's miner on Ubuntu but it's AMD only.



edit:

Somebody told me this works under Ubuntu for NVIDIA cards. -- https://github.com/tsiv/ccminer-cryptonight/

[CrayjeksAjek]

Would this be a correct bat file for mining to XMR wallet?

Set GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner -o stratum+tcp://monerohash.com:7777 -u 46vuJWUvqsHiqsMsheewpjKBKhKBRyqB72z7HWFiRff8GrghAha7wUPQcawxAcuUEiDX5s6K31fu5Rd gpr8UrUmB8CpBVwh -p x

I have tried finding some threads on the subject. I get confused when it starts talking about base IDs and integrated addresses. I wanted to mine directly to bittrex but am confused how to do any of this.

[KOVIC]

Hey guys, 
What about this:

Share rejected (266 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}

Normal mining but sometimes show this error. 

[vydelek]

Clay please FAN!

NO FAN  in DRIVER BETA AMD 4xx and 5xx

Thanks

[KOVIC]

Clay please FAN!

NO FAN  in DRIVER BETA AMD 4xx and 5xx

Thanks

hey bro, you get this error "share rejected - low dificuylty" ? clocks? gpu model?

[nadrojcote]

Is it possible when mining with minexmr.com to set a static difficulty setting? It keeps increasing it to the point that I only get a share every 5 minutes or so.

[notbatman]

I'm changing -mvddc setting which is supposed to be memory voltage, but for some reason I think it changes my GPU core voltage. I can see under GPU-Z / Sensors / VDDC value change to reflect -mvddc value I put it.

Using RX470 4GB.

Is Claymore -mvdcc command actually hanging GPU core voltage or is GPU-Z reporting memory voltage instead of core voltage?

Neither, haha. That command does nothing, Jack shit.

If anything, Claymore's miner is actually setting VDDC instead.

His software is very mysterious!

In other news I dusted off your old cryptonote miner (https://github.com/OhGodAPet/wolf-xmr-miner) and got it compiled under Ubuntu 16.04, it works good as new; my stock RX480s are getting 630 H/s @ 150W.


edit:

I tested a stock RX460 and it gets 300 H/s @ 45W.

edit2:

NVIDIA GeForce GTX 1080 SC gets 517 H/s @ 300W (ccminer). <--- LOL!!!




edit3:

I'd also like to confirm that wolf's miner does support CPU mining and dual CPU+GPU mining.

[cryptouse]

is there any chance to add nvidia support ?

[SchuerfImperium]

is there any chance to add nvidia support ?

i hope it also...xmr give better profits then eth at the moment...we need better support for this miner actually....

[bdon22]

Miner shuts down shortly after starting up with this header:

12:58:22:515   f38   
12:58:22:520   f38   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
12:58:22:525   f38   º            Claymore CryptoNote GPU Miner  v9.7 Beta            º
12:58:22:530   f38   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Windows 10 64-bit, AMD RX 580 on 17.4.4 drivers. Also could not get it to work using latest AMD beta blockchain drivers. Also tried on a different PC with RX 570, same OS, same issue.

I get the error "nsgcpucnminer.exe has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."

I have also tried running directly from command prompt in administrator mode, no luck.

start.bat:

NsGpuCNMiner.exe -o ssl://xmr-us-east1.nanopool.org:14433 -u moneroaddress.worker/email@email.com -p z -ftime 1

config.txt:

-o ssl://xmr-us-east1.nanopool.org:14433 -u moneroaddress.worker/email@email.com -p z -ftime 1

epools.txt:

POOL: xmr-eu1.nanopool.org:14433, WALLET: moneroaddress.worker/email@email.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0
POOL: xmr-eu2.nanopool.org:14433, WALLET: moneroaddress.worker/email@email.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0
POOL: xmr-us-east1.nanopool.org:14433, WALLET: moneroaddress.worker/email@email.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0
POOL: xmr-us-west1.nanopool.org:14433, WALLET: moneroaddress.worker/email@email.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0
POOL: xmr-asia1.nanopool.org:14433, WALLET: moneroaddress.worker/email@email.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0

Any help would be appreciated.

[notbatman]

Here's a cryptonote hardware mining comparison schedule for 93 AMD cards plus a few NVIDIAs. -- https://docs.google.com/spreadsheets/d/t_usoLpWsHq7K6-PeYXigCw/htmlview

[notbatman]

Miner shuts down shortly after starting up with this header:

12:58:22:515   f38   
12:58:22:520   f38   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
12:58:22:525   f38   º            Claymore CryptoNote GPU Miner  v9.7 Beta            º
12:58:22:530   f38   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Windows 10 64-bit, AMD RX 580 on 17.4.4 drivers. Also could not get it to work using latest AMD beta blockchain drivers. Also tried on a different PC with RX 570, same OS, same issue.

I get the error "nsgcpucnminer.exe has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."

I have also tried running directly from command prompt in administrator mode, no luck.

start.bat:

NsGpuCNMiner.exe -o ssl://xmr-us-east1.nanopool.org:14433 -u moneroaddress.worker/email@email.com -p z -ftime 1

config.txt:

-o ssl://xmr-us-east1.nanopool.org:14433 -u moneroaddress.worker/email@email.com -p z -ftime 1

epools.txt:

POOL: xmr-eu1.nanopool.org:14433, WALLET: moneroaddress.worker/email@email.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0
POOL: xmr-eu2.nanopool.org:14433, WALLET: moneroaddress.worker/email@email.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0
POOL: xmr-us-east1.nanopool.org:14433, WALLET: moneroaddress.worker/email@email.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0
POOL: xmr-us-west1.nanopool.org:14433, WALLET: moneroaddress.worker/email@email.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0
POOL: xmr-asia1.nanopool.org:14433, WALLET: moneroaddress.worker/email@email.com, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0

Any help would be appreciated.

This might work:

xmr.bat

Code:

@echo off

setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner.exe -tt 30 -mport 0 -allpools 1 -o stratum+tcp://127.0.0.1:1234 -u user.worker -p x

pause

[Ursul0]

and we are back here with the recent XMR jump
Any chance of proper miner update?
one of the sgminer's forks - gatelessgate does it for me smoother and faster (105W + 710h from 470 4gb)

[osnwt]

Linux!!! Linux!!!

[yslyung]

on win10 beta drivers from amd claymore v9.7 everything works well except miner not showing gpu temps & fan speed. works well with latest ethman v3.4