amedeusx
Newbie
Offline
Activity: 82
Merit: 0
|
|
April 09, 2018, 06:21:55 AM |
|
I am getting error: cannot convert blob data
how to fix this?
add this -pow7 1
|
|
|
|
rockk
Jr. Member
Offline
Activity: 31
Merit: 2
|
|
April 09, 2018, 06:30:12 AM |
|
Now using Claymore 11.3 mining Monero with -pow7 1 and it works wonderfully. All my RX 570s hashing at 850-855H/s Claymore, you are the champ! heya could u share ur start bat ? i m a newb , much appreciated.
|
|
|
|
AlexanderDumas
Newbie
Offline
Activity: 206
Merit: 0
|
|
April 09, 2018, 06:52:04 AM |
|
Hi all,
I have not used Claymore before and have just set it up for my Vega rig,
I am getting approx 1750 h/s per card with xmr-stak this was nearer 2000 h/s
The miner displays the message 'this miner is not optimised for Vega'
Can someone tell me what I need to change and where.
I have tried several settings in config but they just make things slower or not work at all.
Thanks
castXmr is very efficient for Vegas Are you sure about that? Cast is closed-source. Unless you (or someone) have a lot of VEGAs and have collected a lot of data over time, you probably have no idea if Gandalf hasn't padded the stats by 5-10%. I guess the same thing can be said for binaries from any source. XMR-STAK and SGminer both give comparable hashrates if configured correctly. Besides, why run your cards at 1900-2000+ H/s with profitability where it is now? Let them run cooler and save the fan bearings. I have been mining with Cast for 5 months and the stats are not padded. At the Nanopool, with both ETN and XMR, averaging results per 24 hours periods, I actually get a few % H/s more than those recorded by the miner.
|
|
|
|
Eisenkopf89
|
|
April 09, 2018, 06:58:18 AM |
|
Now using Claymore 11.3 mining Monero with -pow7 1 and it works wonderfully. All my RX 570s hashing at 850-855H/s Claymore, you are the champ! heya could u share ur start bat ? i m a newb , much appreciated. My RX570 get about 870-900 H/s on Cast XMR. Settings for it: Temp target: 60 C Coreclock: 1150 Corevoltage: 850 Memclock: 2000 Memvoltage: 850
|
|
|
|
notevilaccount
Newbie
Offline
Activity: 1
Merit: 0
|
|
April 09, 2018, 08:03:49 AM |
|
Unfortunately same 0 H/s Any other efficient miners for old AMD VGAs? XMRig gives only 90H/s, whereas Claymore's 9.7 Miner was outputting 220H/s and that was very good for such an old card. Claymore the owners of old cards bagging you, please add CryptoNightV7 support to 9.7 version. Your miner is simple the best for these GPUs. Yes please add -pow7 to 9.7 version 🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻 Currently using win7 and 14.4 drivers + other miner to get v7 hash agreeable with hd6970s. R9 290x card in same rig suffers quite bad, 11.3 pow7 gives some ~475 rate, with dmem 1 and -h 363. dmem 0 and/or h value between ~300-1000 seems to result 0-400-450 h/s. 6970 cards benefit some 250 h/s and 290 is loosing 200, compared to win7+15.12 or 15.7x, or win10. Any idea for some miner/settings combo for 290 card with 14.4 driver? Tried allready quite a bit. Different drivers for cards wasnt anyhow possible? Or please that v7 for ver 9.7 miner.
|
|
|
|
metz
Newbie
Offline
Activity: 23
Merit: 0
|
|
April 09, 2018, 09:15:52 AM |
|
I am getting error: cannot convert blob data
how to fix this?
add this -pow7 1 Thank you... If I was running the miner without -pow7 1 for several hours, does that mean my shares were not doing anything?
|
|
|
|
dotachin
Newbie
Offline
Activity: 41
Merit: 0
|
|
April 09, 2018, 10:02:46 AM |
|
What's the best settings for R9 290/390? I was able to get 900H with v10.2 but only ~700 with 11.3, tried lots of -h
|
|
|
|
Call_Me_Bambi
|
|
April 09, 2018, 10:17:27 AM |
|
I am getting error: cannot convert blob data
how to fix this?
add this -pow7 1 Thank you... If I was running the miner without -pow7 1 for several hours, does that mean my shares were not doing anything? Unfortunately yes, you were mining on the wrong algorithm so your several hours of mining were completely wasted
|
|
|
|
metz
Newbie
Offline
Activity: 23
Merit: 0
|
|
April 09, 2018, 10:26:53 AM |
|
I am getting error: cannot convert blob data
how to fix this?
add this -pow7 1 Thank you... If I was running the miner without -pow7 1 for several hours, does that mean my shares were not doing anything? Unfortunately yes, you were mining on the wrong algorithm so your several hours of mining were completely wasted well thats annoying! should have kept an eye on the change log... although i guess -pow7 1 should now be set to default by Claymore IMO
|
|
|
|
ramcrash
Newbie
Offline
Activity: 46
Merit: 0
|
|
April 09, 2018, 12:23:44 PM Last edit: April 09, 2018, 02:29:04 PM by ramcrash |
|
|
|
|
|
rhaegonz
Newbie
Offline
Activity: 64
Merit: 0
|
|
April 09, 2018, 01:37:38 PM |
|
I have 2 Rigs and im using this command: -xpool XXXXX -xwal XXXXXX -xpsw XXXXX -pow7 1 -dmem 1 -h 896
- x6 MSI 4G RX570 -> 2.4 mhs (cap to exactly 400hs each) - x5 NITRO 4G RX570 -> 3.6 mhs (720~ each)
Both rigs running at 950core/2000mem and BIOS modified timmings (by polaris app).
I think its a bit weird same command and very different results with this new claymore, if i switch to xmrig or xmr-amd-stak everything is fine!
The only way to make the MSI rig faster is by adding -dmem 0 and -h 632 and that gives only about 3.7mhs(vs 4.2 on other miners app) which still very low considering it has one more gpu than the other rig ...
why are you running your core and mem so low? my MSI Gaming X 570 4GB is getting 890h/s 1150 core, 2010 mem. 925mv for both. the H value is like 890 or whatever i just copied someone from a previous comment had had success. In my experience mining XMR core/mem almost doesn't affect the hashrate but it does to the wattage. I got almost same hashrate with 950 or even 1200 but wattage increase a lot.
|
|
|
|
MiningSumo
Newbie
Offline
Activity: 1
Merit: 0
|
|
April 09, 2018, 03:14:25 PM |
|
Hey, I get no asm binary found error for my RX 550s ... does Claymore 11.3 not support these??
Please help. How do I mine with 550??
|
|
|
|
wOvAN
Jr. Member
Offline
Activity: 41
Merit: 3
|
|
April 09, 2018, 03:48:24 PM |
|
Claymore's CryptoNight AMD GPU Miner.
Hi, can you add reject statistics by GPU like in Ethminer?
|
|
|
|
Nick_CT
Newbie
Offline
Activity: 1
Merit: 0
|
|
April 09, 2018, 04:15:54 PM |
|
Can someone help me with my really low hash rate please?
I have a few rigs running Ethos and Claymore 11.3 and the hashrates for XMR per card are about +/- 700. Cards are RX470 and RX580. I have a Windows 10 rig with 6x RX 480 cards that I've now installed Claymore 11.3 on and got it up and running, but the cards are only hashing at about 370 each which is almost half of what they are doing on the Linux machines.
I can't figure out why. Cards have modded BIOS as per the other ones, core 1110 and mem 1980 and the same cards that are running double the hash rates on my Linux rigs.
My config is as such:
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 NsGpuCNMiner.exe -xpool ssl://xmr-eu1.nanopool.org:14433 -xwal MyWalletAddressEtc -xpsw z -pow7 1
Thanks
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
|
April 09, 2018, 04:59:37 PM |
|
Hi Dev/Team,
I there any roadmap to be able to mine Ravecoin X16R algorithm any time soon using RX580 AMD on Windows Thanks
YOUR POST IS OFF-TOPIC-- The Claymore-XMR miner mines CryptoNight algorithm(s). --scryptr
|
|
|
|
mikemill
Newbie
Offline
Activity: 1
Merit: 0
|
|
April 09, 2018, 06:24:08 PM |
|
I've got an MSI RX580 8GB and PowerColor RX580 8GB
The PowerColor is getting 866 h/s The MSI is getting 775 h/s
The MSI has Hynix memory, the PowerColor has Samsung memory
Both cards are OC'd/UV'd
Any way to push the MSI higher? How about the PowerColor?
GPU is 1130/850 and Mem is 2000/950 on the PowerColor GPU is 1130/850 and Mem is 2150/800 on the MSI
|
|
|
|
hexing110
Newbie
Offline
Activity: 6
Merit: 0
|
|
April 09, 2018, 06:32:27 PM |
|
Hello, please add Cryptonight-Heavy new algorithm,please please
|
|
|
|
OhMyHolyToken
Jr. Member
Offline
Activity: 98
Merit: 2
|
|
April 09, 2018, 07:46:30 PM |
|
Yep, we all need Cryptonight-Heavy!
|
|
|
|
SRline
Newbie
Offline
Activity: 52
Merit: 0
|
|
April 09, 2018, 08:22:57 PM |
|
Yep, we all need Cryptonight-Heavy!
+
|
|
|
|
Call_Me_Bambi
|
|
April 09, 2018, 10:28:05 PM |
|
It looks like you are trying to mine Sumokoin, which is a Cryptonight-Heavy algorithm, Claymore's Cryptonight miner does not support the Cryptonight-Heavy algo, you will need to use a different miner.
|
|
|
|
|