Claymore's CryptoNote AMD GPU Miner v11.3

[D1kiy]

Hi,

I have issue with fans control using this miner.
If I specify target temperature (-tt 50), fans speed just jumps to max when temperature is more than specified and then drops to 0.
And even if I specify fans speed (-tt -50), they do not work constantly at this speed, but also periodically turn off and on again. How to solve this problem?
My rig is 8 x RX574 on Windows 10 with latest Adrenaline drivers.

Thank you in advance!

I had the same problem on RX480. Tried all drivers. One or two cards fans hit 100% after some time, and only reboot calms them down. It turns put its a driver problem and its still not fixed. One solution i found is to not turn on Afterburner at all on startup. If i dont use afterburner then im good. Havent tried with other tools

I do not use any other software. And I do not have this problem with Claymores dual miner. That's weird why these miners work different way with drivers.

[Marvell2]

getting 24% rejected shares on nicehash with the claymore miner v7 any ideas ?

[dirton]

Any ideas hot to make latest version supporting today's hard fork to mine on Radeon HD 5870? Everything start fine, but 0 H/s is all what I get.

Code:

AMD Cards available: 1
GPU #0: Cypress (AMD Radeon HD 5800 Series), 1024 MB available, 20 compute units (pci bus 1:0:0)
POOL version
No ASM binary found for GPU 0
GPU #0 algorithm ASM, -h 320, -dmem 0 (Memory used: 656MB)
Total cards: 1
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

XMR: Stratum - connecting to 'pool.supportxmr.com' <91.121.140.167> port 5555 (unsecure)
XMR: Stratum - Connected (pool.supportxmr.com:5555) (unsecure)
GPU0 t=29C fan=21%

GPU #0: Cypress (AMD Radeon HD 5800 Series), 1024 MB available, 20 compute units (pci bus 1:0:0)
XMR - Total Speed: 0 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
XMR: GPU0 0 H/s
Incorrect XMR shares: none
1 minute average XMR total speed: 0 H/s
Pool switches: XMR - 0
Current XMR pool share target: 0x00068db8 (diff: 10000H)
GPU0 t=26C fan=21%

[jcpham]

add

-pow7 1

on latest version of software. but your card is older than mine!

Any ideas hot to make latest version supporting today's hard fork to mine on Radeon HD 5870? Everything start fine, but 0 H/s is all what I get.

Code:

AMD Cards available: 1
GPU #0: Cypress (AMD Radeon HD 5800 Series), 1024 MB available, 20 compute units (pci bus 1:0:0)
POOL version
No ASM binary found for GPU 0
GPU #0 algorithm ASM, -h 320, -dmem 0 (Memory used: 656MB)
Total cards: 1
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

XMR: Stratum - connecting to 'pool.supportxmr.com' <91.121.140.167> port 5555 (unsecure)
XMR: Stratum - Connected (pool.supportxmr.com:5555) (unsecure)
GPU0 t=29C fan=21%

GPU #0: Cypress (AMD Radeon HD 5800 Series), 1024 MB available, 20 compute units (pci bus 1:0:0)
XMR - Total Speed: 0 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
XMR: GPU0 0 H/s
Incorrect XMR shares: none
1 minute average XMR total speed: 0 H/s
Pool switches: XMR - 0
Current XMR pool share target: 0x00068db8 (diff: 10000H)
GPU0 t=26C fan=21%

[Jaknip]

getting 24% rejected shares on nicehash with the claymore miner v7 any ideas ?

Have you tried other pools to see the rejection rate?

[dirton]

add

-pow7 1

on latest version of software. but your card is older than mine!

Unfortunately same 0 H/s
Any other efficient miners for old AMD VGAs?
XMRig gives only 90H/s, whereas Claymore's 9.7 Miner was outputting 220H/s and that was very good for such an old card.

Claymore the owners of old cards bagging you, please add CryptoNightV7 support to 9.7 version. Your miner is simple the best for these GPUs.

[jcpham]

add

-pow7 1

on latest version of software. but your card is older than mine!

Unfortunately same 0 H/s
Any other efficient miners for old AMD VGAs?
XMRig gives only 90H/s, whereas Claymore's 9.7 Miner was outputting 220H/s and that was very good for such an old card.

same problem here! xmrig sucks, been using claymore 9.3 FOREVER.
New version of Claymore don't have an OpenCL .bin supporting the old cards.

xmrig is the only thing I can get work on new POW and old GPUs

[Marvell2]

getting 24% rejected shares on nicehash with the claymore miner v7 any ideas ?

Have you tried other pools to see the rejection rate?

dont see rejected shares on nanopool

[STAT303954]

Hi all,

I have not used Claymore before and have just set it up for my Vega rig,

I am getting approx 1750 h/s per card with xmr-stak this was nearer 2000 h/s

The miner displays the message 'this miner is not optimised for Vega'

Can someone tell me what I need to change and where.

I have tried several settings in config but they just make things slower or not work at all.

Thanks

castXmr is very efficient for Vegas

[Ray69]

Hi all,

I have not used Claymore before and have just set it up for my Vega rig,

I am getting approx 1750 h/s per card with xmr-stak this was nearer 2000 h/s

The miner displays the message 'this miner is not optimised for Vega'

Can someone tell me what I need to change and where.

I have tried several settings in config but they just make things slower or not work at all.

Thanks

castXmr is very efficient for Vegas

Thanks, I installed castXmr and backup to speed 

What will the Network hashrate show soon I wonder 

[hack4love]

what is the best wallat for Monero Fork i need something like myetherwallet.com

[Moraen]

Ive been mining XMR with claymore 9.7 and was getting around 700h/s. After the fork, had to change the miner to 11.3 version and since then hashrate dropped to 300. using sapphire nitro+rx 580 le. I modded the bios of card to get more juice...do i have to put stock bios or update the drivers?

[Lio78]

Ive been mining XMR with claymore 9.7 and was getting around 700h/s. After the fork, had to change the miner to 11.3 version and since then hashrate dropped to 300. using sapphire nitro+rx 580 le. I modded the bios of card to get more juice...do i have to put stock bios or update the drivers?

Me too, any solution?

Thank's

[cammino]

Please, add RX 550

[pass75]

Please, add RX 550

Yes, please add support for RX550. Thank you!

[fx_spb]

AMD rx550 not work 

no ASM binary  found

Yes currently only popular cards are supported: Pitcairn, Tahiti, Hawaii, Fiji, Tonga, Ellesmere, Baffin, Vega.
I will add other cards but a bit later.

It was my favorite miner (v9.7), thank you anyway... As I see in recent readme file: "This version is for recent AMD videocards only: 7xxx, 2xx, 3xx and 4xx, 1GB or more" - I have some AMD HD7790 (7xxx!) cards but can't use them right now with 10.x/11.x versions on XMR ("-pow7 1"). And of cource all other old cards (57xx/58xx)
Is it no chance to support them? Please-please-please bring it back!

[hunghcm]

-pow7 1
can not mine , pls fix

[rednoW]

There are a lot cryptonight miners around that a much better than Claymore's. So if he doesn't want to continue development - leave 0% fee and exit is a right move!

[SRline]

Claymore the best!

[OhMyHolyToken]

We need Crypto-heavy.