dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
January 06, 2015, 01:23:58 PM |
|
i just put the new 0103 firmware on my s3s.. HWE% is higher then its ever been The 0103 firmware is real lousy I am getting HW ERRORS now and never got them before even dropped it down to stock speed still NO GOOD just to many HW ERRORS way to go BITMAIN!!!!
Reported to engineers, thanks.
|
|
|
|
dog1965
|
|
January 06, 2015, 01:40:24 PM |
|
|
|
|
|
Darthswan
|
|
January 06, 2015, 02:35:43 PM |
|
i just put the new 0103 firmware on my s3s.. HWE% is higher then its ever been The 0103 firmware is real lousy I am getting HW ERRORS now and never got them before even dropped it down to stock speed still NO GOOD just to many HW ERRORS way to go BITMAIN!!!!
Reported to engineers, thanks. What happened between 12/16 to 12/19 to 01/03? 12/16 seems to be the best firmware update ever. They should go back to that one.
|
|
|
|
mrpark
|
|
January 06, 2015, 02:52:40 PM |
|
What does it mean when your S3+ has a normal hash rate like 480 Gh/s, but your average is listed as 18 Gh/s? Going crazy over here... Of the last 3 firmwares, the 12/16 seem to be the best. I know they took it down, but it my early batch S3 up to 500G consistently. I think I will go back to that one. It was better than the 12/19.
|
BTC: 1JDjCGtxtxoZ46XgTqUoXBDxNFKwcsEmik
|
|
|
aclass
|
|
January 06, 2015, 02:58:58 PM |
|
This is a bug. Reboot from the web gui and check again What does it mean when your S3+ has a normal hash rate like 480 Gh/s, but your average is listed as 18 Gh/s? Going crazy over here... Of the last 3 firmwares, the 12/16 seem to be the best. I know they took it down, but it my early batch S3 up to 500G consistently. I think I will go back to that one. It was better than the 12/19.
|
|
|
|
daddyfatsax
|
|
January 06, 2015, 09:37:36 PM |
|
Can we get a firmware that actually has the correct fan speed? Out of 11 miners, 6 are wrong.
Hfan Fans 1740 1740 1380 1560 1560 1200 1860 1860 1620 1500 1500 1320 1740 1740 1500 7140 4260 7140 9300 7200 9300 8460 8460 6240 9480 7500 9480 8940 8700 8940 10500 7080 10500
|
|
|
|
mrpark
|
|
January 06, 2015, 09:42:37 PM |
|
OK, I did that and it worked. So what you are telling me, you can't just power up a S3+ miner, you have to go in and reboot it from the web interface. I find it surprising because this is the newest and greatest firmware. Is there a list of bugs somewhere? How is the average miner supposed to know all these things? This is a bug. Reboot from the web gui and check again What does it mean when your S3+ has a normal hash rate like 480 Gh/s, but your average is listed as 18 Gh/s? Going crazy over here... Of the last 3 firmwares, the 12/16 seem to be the best. I know they took it down, but it my early batch S3 up to 500G consistently. I think I will go back to that one. It was better than the 12/19.
|
BTC: 1JDjCGtxtxoZ46XgTqUoXBDxNFKwcsEmik
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
January 06, 2015, 11:58:13 PM |
|
Can we get a firmware that actually has the correct fan speed? Out of 11 miners, 6 are wrong.
Hfan Fans 1740 1740 1380 1560 1560 1200 1860 1860 1620 1500 1500 1320 1740 1740 1500 7140 4260 7140 9300 7200 9300 8460 8460 6240 9480 7500 9480 8940 8700 8940 10500 7080 10500
What do you mean? What is that data?
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
January 07, 2015, 12:11:41 AM |
|
i just put the new 0103 firmware on my s3s.. HWE% is higher then its ever been The 0103 firmware is real lousy I am getting HW ERRORS now and never got them before even dropped it down to stock speed still NO GOOD just to many HW ERRORS way to go BITMAIN!!!!
Reported to engineers, thanks. What happened between 12/16 to 12/19 to 01/03? 12/16 seems to be the best firmware update ever. They should go back to that one. According to the change log, not much that should break things.
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
|
January 07, 2015, 12:46:49 AM |
|
i just put the new 0103 firmware on my s3s.. HWE% is higher then its ever been The 0103 firmware is real lousy I am getting HW ERRORS now and never got them before even dropped it down to stock speed still NO GOOD just to many HW ERRORS way to go BITMAIN!!!!
Reported to engineers, thanks. What happened between 12/16 to 12/19 to 01/03? 12/16 seems to be the best firmware update ever. They should go back to that one. never tried the 12/16 one, but i have 12/19 and 01/03. the 10/24 one seems best for me. the 12/19 was ok, lower rejects but also slightly lower hash avg but they lost connection every few hours, beeped and rebooted. oh and for the very first time since i owned the s3s, on the 12/19 rom, i had a - on one of the chips.. that kept coming back after a reboot.
|
|
|
|
daddyfatsax
|
|
January 07, 2015, 04:47:07 AM |
|
Can we get a firmware that actually has the correct fan speed? Out of 11 miners, 6 are wrong.
Hfan Fans 1740 1740 1380 1560 1560 1200 1860 1860 1620 1500 1500 1320 1740 1740 1500 7140 4260 7140 9300 7200 9300 8460 8460 6240 9480 7500 9480 8940 8700 8940 10500 7080 10500
What do you mean? What is that data? It is the fan data from my S3's pages.
|
|
|
|
dog1965
|
|
January 07, 2015, 06:12:34 AM |
|
i just put the new 0103 firmware on my s3s.. HWE% is higher then its ever been The 0103 firmware is real lousy I am getting HW ERRORS now and never got them before even dropped it down to stock speed still NO GOOD just to many HW ERRORS way to go BITMAIN!!!!
Reported to engineers, thanks. What happened between 12/16 to 12/19 to 01/03? 12/16 seems to be the best firmware update ever. They should go back to that one. According to the change log, not much that should break things. Yea right Dogie.
|
|
|
|
grn
|
|
January 07, 2015, 06:22:42 AM |
|
i just put the new 0103 firmware on my s3s.. HWE% is higher then its ever been The 0103 firmware is real lousy I am getting HW ERRORS now and never got them before even dropped it down to stock speed still NO GOOD just to many HW ERRORS way to go BITMAIN!!!!
Reported to engineers, thanks. What happened between 12/16 to 12/19 to 01/03? 12/16 seems to be the best firmware update ever. They should go back to that one. According to the change log, not much that should break things. Yea right Dogie. 0103 firmware seems the most stable so far, good hash rate through 25 hours poolside and miner
|
How is that Lexical analysis working out bickneleski?
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
|
January 07, 2015, 07:46:58 AM |
|
i just put the new 0103 firmware on my s3s.. HWE% is higher then its ever been The 0103 firmware is real lousy I am getting HW ERRORS now and never got them before even dropped it down to stock speed still NO GOOD just to many HW ERRORS way to go BITMAIN!!!!
Reported to engineers, thanks. What happened between 12/16 to 12/19 to 01/03? 12/16 seems to be the best firmware update ever. They should go back to that one. According to the change log, not much that should break things. Yea right Dogie. 0103 firmware seems the most stable so far, good hash rate through 25 hours poolside and miner whats your HWE%?
|
|
|
|
ChineseSavior
|
|
January 07, 2015, 07:51:22 AM |
|
they dropped the s3 to 150$ but they are way overpriced... so are the s5's this makes me sad because i really like bitmain. The best value right now is the 3 spondoolies sp20's for 1495 w/free shipping. Please bitmain lower prices so we can make more money
|
|
|
|
dog1965
|
|
January 07, 2015, 08:17:04 AM |
|
Anybody know a good link to get 8 pin PCI-E to 6 PIN PCI-E adaptors with a good heavy gauge wire ?
Sorry that's its off topic.
|
|
|
|
dog1965
|
|
January 07, 2015, 08:20:24 AM |
|
HW errors are way off the scale with JAN Firmware. I switched Back to the DEC-19 firmware now I have 0 HW errors !!!!!
There is something wrong with the JAN firmware thanks BITMAIN !!!!
|
|
|
|
gaalx
|
|
January 07, 2015, 08:31:55 AM |
|
burned one driver control two chips, how to turn off outside the chip on the board, so they do not interfere with the rest of the work. thank you. control board can operate without damaging two BM1382. I would like to remove them, so I bought one S3 non-working board for half price. that it is necessary unsolder? duplicate of topics - https://bitcointalk.org/index.php?topic=702653.msg10066563#msg10066563. please help.
|
|
|
|
intobit459
Newbie
Offline
Activity: 24
Merit: 0
|
|
January 07, 2015, 08:46:05 AM |
|
upload or pm me the 12.16 firmware 01.03 is absolutely terrible hwe is .01+ compared to .0001 before
voltage doesnt seem to have much affect anymore on hwe like before
|
|
|
|
ChineseSavior
|
|
January 07, 2015, 10:11:27 AM |
|
why does it say free ocean shipping but still showing a total for shipping?
|
|
|
|
|