daddyfatsax
|
|
January 20, 2015, 06:50:31 PM |
|
Gotta give some credit to BitmainWarranty. Had a controller fail on an S3+ I bought in July and BitmainWarranty is replacing it for me at no cost. Gotta love that!
dogie gets a head scratch as well. Thanks!!
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1183
dogiecoin.com
|
|
January 21, 2015, 12:03:13 AM |
|
Gotta give some credit to BitmainWarranty. Had a controller fail on an S3+ I bought in July and BitmainWarranty is replacing it for me at no cost. Gotta love that!
dogie gets a head scratch as well. Thanks!!
Errrmerrrguurd, head scratches
|
|
|
|
Bnu
|
|
January 21, 2015, 12:13:08 AM Last edit: January 21, 2015, 12:26:01 AM by Bnu |
|
great solution, did the same with 2,2k: 310-315 GH/s at 185 W with Thermaltake Hamburg instead of 440 GH/s at 380W, thanks for your support. As I killed 3 SMD Resistors (resistor part disconnected to soldering ends) , I figured out, that the full substitution is 1,2k. At the end the resistor in circiut is 1,06k.
|
|
|
|
adaseb
Legendary
Offline
Activity: 3808
Merit: 1723
|
|
January 21, 2015, 07:44:08 AM |
|
Hello
I bought a used Antminer S3 but the user and password "root" doesn't work. The previous owner must of changed it.
Anyway to reset it?
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1183
dogiecoin.com
|
|
January 21, 2015, 07:52:05 AM |
|
Hello
I bought a used Antminer S3 but the user and password "root" doesn't work. The previous owner must of changed it.
Anyway to reset it?
Reset button will do that, assuming the unit was on one of the newer firmwares where it works.
|
|
|
|
kabopar
|
|
January 21, 2015, 07:54:20 AM |
|
Hello
I bought a used Antminer S3 but the user and password "root" doesn't work. The previous owner must of changed it.
Anyway to reset it?
Check Dogie's guide at https://bitcointalk.org/index.php?topic=702653. There is a reset switch accessible from the front panel, next to the 2 LEDs and Ethernet connector. You power it up, press the reset button through the hole using a paper clip or similar thin object, hold it for 5-10 secs. This will reset it to factory defaults, including the password. Cheers
|
|
|
|
adaseb
Legendary
Offline
Activity: 3808
Merit: 1723
|
|
January 21, 2015, 08:11:48 AM |
|
Hello
I bought a used Antminer S3 but the user and password "root" doesn't work. The previous owner must of changed it.
Anyway to reset it?
Check Dogie's guide at https://bitcointalk.org/index.php?topic=702653. There is a reset switch accessible from the front panel, next to the 2 LEDs and Ethernet connector. You power it up, press the reset button through the hole using a paper clip or similar thin object, hold it for 5-10 secs. This will reset it to factory defaults, including the password. Cheers Are the lights suppose to change when pressing the button? They all stay lite, like pressing it does nothing.
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1183
dogiecoin.com
|
|
January 21, 2015, 09:58:28 AM Last edit: January 23, 2015, 12:18:57 PM by dogie |
|
Hello
I bought a used Antminer S3 but the user and password "root" doesn't work. The previous owner must of changed it.
Anyway to reset it?
Check Dogie's guide at https://bitcointalk.org/index.php?topic=702653. There is a reset switch accessible from the front panel, next to the 2 LEDs and Ethernet connector. You power it up, press the reset button through the hole using a paper clip or similar thin object, hold it for 5-10 secs. This will reset it to factory defaults, including the password. Cheers Are the lights suppose to change when pressing the button? They all stay lite, like pressing it does nothing. Yes they are, suggests the unit is on a firmware where the reset button's functionality is broken. While you wait for your seller to reply to your password email, you can SSH and control them from there. This will at least get you up and running. 1) SSH to S3, Login root/root 2) Type "screen -r". Wait for all the messages to go through. 3) Type "P" to enter Pool Management.
|
|
|
|
adaseb
Legendary
Offline
Activity: 3808
Merit: 1723
|
|
January 21, 2015, 10:17:24 AM |
|
Hello
I bought a used Antminer S3 but the user and password "root" doesn't work. The previous owner must of changed it.
Anyway to reset it?
Check Dogie's guide at https://bitcointalk.org/index.php?topic=702653. There is a reset switch accessible from the front panel, next to the 2 LEDs and Ethernet connector. You power it up, press the reset button through the hole using a paper clip or similar thin object, hold it for 5-10 secs. This will reset it to factory defaults, including the password. Cheers Are the lights suppose to change when pressing the button? They all stay lite, like pressing it does nothing. Yes they are, suggests the unit is on a firmware where the reset button's functionality is broken. While you wait for your seller to reply to your password email, you can SSH and control them from there. This will at least get you up and running. 1) SSH to S5, Login root/root 2) Type "screen -r". Wait for all the messages to go through. 3) Type "P" to enter Pool Management. the user and password root doesn't work.
|
|
|
|
windpath
Legendary
Offline
Activity: 1258
Merit: 1027
|
|
January 21, 2015, 02:00:13 PM |
|
Hello
I bought a used Antminer S3 but the user and password "root" doesn't work. The previous owner must of changed it.
Anyway to reset it?
Check Dogie's guide at https://bitcointalk.org/index.php?topic=702653. There is a reset switch accessible from the front panel, next to the 2 LEDs and Ethernet connector. You power it up, press the reset button through the hole using a paper clip or similar thin object, hold it for 5-10 secs. This will reset it to factory defaults, including the password. Cheers Are the lights suppose to change when pressing the button? They all stay lite, like pressing it does nothing. Yes they are, suggests the unit is on a firmware where the reset button's functionality is broken. While you wait for your seller to reply to your password email, you can SSH and control them from there. This will at least get you up and running. 1) SSH to S5, Login root/root 2) Type "screen -r". Wait for all the messages to go through. 3) Type "P" to enter Pool Management. the user and password root doesn't work. ssh root@YOUR.MINER.IP Password: root
Should work...
|
|
|
|
mrpark
|
|
January 21, 2015, 02:01:59 PM |
|
Having a problem with the S3+ miner I returned to Bitmain to exchange for a new miner. The miner they sent was not brand new, and I have having the same problem. Please advise on what I should do now. I already tried to upgrade the firmware.
|
BTC: 1JDjCGtxtxoZ46XgTqUoXBDxNFKwcsEmik
|
|
|
aclass
|
|
January 21, 2015, 02:08:43 PM |
|
what does the pool say about your speed? point it to nicehash or westhash or eligius and let's see how it goes
|
|
|
|
mrpark
|
|
January 21, 2015, 02:09:27 PM |
|
I am pointed at eligius. what does the pool say about your speed? point it to nicehash or westhash or eligius and let's see how it goes
|
BTC: 1JDjCGtxtxoZ46XgTqUoXBDxNFKwcsEmik
|
|
|
aclass
|
|
January 21, 2015, 02:12:15 PM |
|
link to miner stats? I am pointed at eligius. what does the pool say about your speed? point it to nicehash or westhash or eligius and let's see how it goes
|
|
|
|
mrpark
|
|
January 21, 2015, 02:13:55 PM |
|
I tried BTCGuild and I got 52 GH/S. link to miner stats? I am pointed at eligius. what does the pool say about your speed? point it to nicehash or westhash or eligius and let's see how it goes
|
BTC: 1JDjCGtxtxoZ46XgTqUoXBDxNFKwcsEmik
|
|
|
aclass
|
|
January 21, 2015, 02:15:10 PM |
|
PSU model? can you post a bigger screen as this one is almost unreadable? what happens when you underclock? I tried BTCGuild and I got 52 GH/S. link to miner stats? I am pointed at eligius. what does the pool say about your speed? point it to nicehash or westhash or eligius and let's see how it goes
|
|
|
|
mrpark
|
|
January 21, 2015, 02:30:09 PM |
|
PSU is EVGA 1300 G2. Set it to S3 voltage same thing. I am going to flash it with the latest firmware again, and uncheck "save settings". I also have another miner, its the same S3+, same pool, same power supply and it runs fine... PSU model? can you post a bigger screen as this one is almost unreadable? what happens when you underclock? I tried BTCGuild and I got 52 GH/S. link to miner stats? I am pointed at eligius. what does the pool say about your speed? point it to nicehash or westhash or eligius and let's see how it goes
|
BTC: 1JDjCGtxtxoZ46XgTqUoXBDxNFKwcsEmik
|
|
|
mrpark
|
|
January 21, 2015, 02:48:41 PM |
|
I flashed the S3+ and it looks different now, I think the voltage wasn't 0000 before and now it is. Another thing I notice, sometimes the Antpool works and other pools don't. Hopefully this fixes it.
|
BTC: 1JDjCGtxtxoZ46XgTqUoXBDxNFKwcsEmik
|
|
|
aclass
|
|
January 21, 2015, 03:03:07 PM |
|
I hope it all works out fine I flashed the S3+ and it looks different now, I think the voltage wasn't 0000 before and now it is. Another thing I notice, sometimes the Antpool works and other pools don't. Hopefully this fixes it.
|
|
|
|
bitsolutions
|
|
January 23, 2015, 06:59:53 AM |
|
Hello
I bought a used Antminer S3 but the user and password "root" doesn't work. The previous owner must of changed it.
Anyway to reset it?
Check Dogie's guide at https://bitcointalk.org/index.php?topic=702653. There is a reset switch accessible from the front panel, next to the 2 LEDs and Ethernet connector. You power it up, press the reset button through the hole using a paper clip or similar thin object, hold it for 5-10 secs. This will reset it to factory defaults, including the password. Cheers Are the lights suppose to change when pressing the button? They all stay lite, like pressing it does nothing. Yes they are, suggests the unit is on a firmware where the reset button's functionality is broken. While you wait for your seller to reply to your password email, you can SSH and control them from there. This will at least get you up and running. 1) SSH to S5, Login root/root 2) Type "screen -r". Wait for all the messages to go through. 3) Type "P" to enter Pool Management. How do you expect to ssh in with root/root if the password was changed? If root doesn't work for the webui pass it won't work for ssh either(barring some very unusual configuration). You should upgrade the firmware as soon as you are able to login as you are most likely on the very dangerous oct 24th firmware. If you can't get the password from the seller you will have to use a TTL cable to reset/reflash it manually.
|
Mining Software Developer.
|
|
|
|