MoreBloodWine
Legendary
Offline
Activity: 1050
Merit: 1001
|
|
August 16, 2014, 10:22:41 AM |
|
I read somewhere that the new firmware update shows a new Freq tab or something, I have just uploaded it but don't see any changes?
Miner Configuration > Advanced Settings.
|
To be decided...
|
|
|
|
|
"You Asked For Change, We Gave You Coins" -- casascius
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
Ilan1
|
|
August 16, 2014, 10:27:12 AM |
|
I read somewhere that the new firmware update shows a new Freq tab or something, I have just uploaded it but don't see any changes?
Miner Configuration > Advanced Settings. Thanks, so if I also use Putty to O/C does this now do anything?
|
|
|
|
MoreBloodWine
Legendary
Offline
Activity: 1050
Merit: 1001
|
|
August 16, 2014, 10:28:29 AM |
|
I read somewhere that the new firmware update shows a new Freq tab or something, I have just uploaded it but don't see any changes?
Miner Configuration > Advanced Settings. Thanks, so if I also use Putty to O/C does this now do anything? If you have the new FW installed you can just forget putty all together.
|
To be decided...
|
|
|
Ilan1
|
|
August 16, 2014, 10:32:59 AM |
|
I read somewhere that the new firmware update shows a new Freq tab or something, I have just uploaded it but don't see any changes?
Miner Configuration > Advanced Settings. Thanks, so if I also use Putty to O/C does this now do anything? If you have the new FW installed you can just forget putty all together. Got it, Thanks
|
|
|
|
PatMan
|
|
August 16, 2014, 10:46:03 AM |
|
I do wish the BITMAIN would publish the device driver details so that a current version of cgminer could be attained. I know at least 2 releases in 4 had notes about queue improvements and one at least specifically stated it generated work much faster. Also one of the last 3's had an improvement about how work was loaded into devices. I know for sure 3.12 is very old and I am positive that many work generation improvements have been added since then.
Exactly. I don't understand why they don't work more closely with the cgminer devs - using such an old miner for this equipment is false economy. There have been many improvements & optimixations since this cgminer release, not to mention a very important fix for work redirection by a third party.
|
|
|
|
buy4crypto
|
|
August 16, 2014, 10:49:11 AM |
|
Wow! It's even hotter today for my S3s than yesterday. Ambient room temperature peaked at 37.3C (99.2F). They have been clocked higher at 237.5M this time around and drawing 408W at the wall but didn't seem to skip a beat at all. These were the stats during that particular period: That makes me feel a bit better when mine get up to 43-45c! Almost through the summer here, then a NY winter will keep these ambient down quite nicely from that point on.
|
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬████ - freecrypto.top - btcinfo.top - DIGITAL CURRENCY DIRECTORIES - freeMonero.com - funbtc.xyz ████▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
|
|
|
bluecityste
Newbie
Offline
Activity: 47
Merit: 0
|
|
August 16, 2014, 10:55:48 AM |
|
Hi, if anyone has any coupons left I am looking to buy at 0.025 per coupon. I think most of them actually run out today, so if anyone has any spares please send me a PM. Thanks guys, Stephen
|
|
|
|
MoreBloodWine
Legendary
Offline
Activity: 1050
Merit: 1001
|
|
August 16, 2014, 10:56:02 AM |
|
I do wish the BITMAIN would publish the device driver details so that a current version of cgminer could be attained. I know at least 2 releases in 4 had notes about queue improvements and one at least specifically stated it generated work much faster. Also one of the last 3's had an improvement about how work was loaded into devices. I know for sure 3.12 is very old and I am positive that many work generation improvements have been added since then.
Exactly. I don't understand why they don't work more closely with the cgminer devs - using such an old miner for this equipment is false economy. There have been many improvements & optimixations since this cgminer release, not to mention a very important fix for work redirection by a third party. Can we just SSH in to it and compile CGMiner to a newer version ?
|
To be decided...
|
|
|
-ck
Legendary
Offline
Activity: 4088
Merit: 1631
Ruu \o/
|
|
August 16, 2014, 11:04:04 AM |
|
I do wish the BITMAIN would publish the device driver details so that a current version of cgminer could be attained. I know at least 2 releases in 4 had notes about queue improvements and one at least specifically stated it generated work much faster. Also one of the last 3's had an improvement about how work was loaded into devices. I know for sure 3.12 is very old and I am positive that many work generation improvements have been added since then.
Exactly. I don't understand why they don't work more closely with the cgminer devs - using such an old miner for this equipment is false economy. There have been many improvements & optimixations since this cgminer release, not to mention a very important fix for work redirection by a third party. Can we just SSH in to it and compile CGMiner to a newer version ? One would assume that we have access to their modified code and driver for cgminer which the cgminer license stipulates, however they have ignored our requests for making that code available. I am considering what direction to take now about that license violation.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
J4bberwock
|
|
August 16, 2014, 11:15:32 AM |
|
I am curious has anyone had any RMA issues with Bitmain ? i have provided them with the order ID and I am still having the hardest time getting RMA information from them. They have demanded I perform a test with something called a multimeter (which i do not own, i had to go purchase one) so i could test the chains. My s3 device pretty much bricked itself with a firmware upgrade. I cannot access the UI, the ip is not found (never changed from default). I used an ipsniffer, and still zilch....anyhow, i am curious to know how Bitmain has dealt with RMA requests from others. Thanks
It took me 2 1/2 weeks of those emails back and fourth. I finally told them I would sell it for parts on Bitcointalk.org and tell everyone about them not honoring warranty. Then and only then did they sent a RMA form. I sent it(controller) off 3 weeks ago and still don't have a replacement. Good luck. What were your failure symptoms? I had one die today.. going to have to go down this road... If somebody in Europe/France does have the same trouble, I'd be happy to have a look and try to unbrick it if Bitmain doesn't accept RMA. Looks like unbricking could be done by serial line programming (easier) or JTAG if serial doesn't work (will have to find the solder points). Both methods will require soldering and will void your warranty. Also, what are the tests asked by Bimaintech?
|
|
|
|
philipma1957
Legendary
Online
Activity: 4116
Merit: 7824
'The right to privacy matters'
|
|
August 16, 2014, 11:23:26 AM |
|
S3 sales slowing down or production ramping up?
I don't know about the production, but you can bet the sales are slowing down. Counting current diff increase trend 0.66 BTC per miner may very likely never been mined out of them. Probably expect serious BTC miner price reduction for Batch #7. Haha, wrong sir! Interesting. If it's shipped Aug 20th, it means starting mining Aug 23-25th. Type that in any calculator as a starting date with 10% difficulty increase and tell me if the miner will return 0.66 BTC. 10% difficulty increase?!? You wish man. Next one will be at least 20-25% possibly higher.... 30 mil hash came into the network right after last difficulty adjustment. I agree next difficulty will be in the 20-25% range if not higher. Also, besides the 30 mil added it looks like more then usual small network hash is getting added. The 30 mil bumped us up to 169 right after ( 7 mil more was added since that spike ) I was going to buy some more s3, but looks to me like something new is coming or private placement deal is going on withs oem big manufacturer. The price staying at .66 btc is not staying in line with bitmain customers at least having a chance to get ROI like in the past. I for one am holding off on getting any additional s3 units without a coupon ( Not happy bought 12 units and no coupons ) or a significant price reduction. right now block rate is 8.8 minutes not 10 minutes. that means 12- 14 % not close to 20%.
clock the block rates if we stay at 8.8 minutes we need to increase 13.6 % to go back to 10 minutes.
8.8 x 1.136363 = about 10 . If the rumor that cex.io added a monster center in iceland is real that was the big jump. we won't add much from now on.Care to make a gentlemanly wager? No I never make bets. especially with christ my 12-14% not close to 20% could be correct after all. https://bitcoinwisdom.com/bitcoin/difficultyBitcoin Difficulty: 19,729,645,941 Estimated Next Difficulty: 22,959,869,961 (+16.37%) http://bitcoincharts.comDifficulty 1972964594 Estimated 22005031037 about 11.53%
|
|
|
|
mdude77
Legendary
Offline
Activity: 1540
Merit: 1001
|
|
August 16, 2014, 11:51:42 AM |
|
Do any reputable sites (non ebay/amazon) have S3s in stock?
M
|
I mine at Kano's Pool because it pays the best and is completely transparent! Come join me!
|
|
|
black3000gt
Newbie
Offline
Activity: 47
Merit: 0
|
|
August 16, 2014, 11:57:37 AM |
|
Do any reputable sites (non ebay/amazon) have S3s in stock?
M
Not that I am aware of.
|
|
|
|
martijntje
Newbie
Offline
Activity: 21
Merit: 0
|
|
August 16, 2014, 11:58:15 AM |
|
Anyone have experience with an S3 where chain #1 gets much hotter? I have a 40 degree temperature on chain #1 while chain #2 is only 32 degrees. The whole thing is a lot slower than the other S3 I have.
Have already tried removing all the thermal paste from the chips and applying arctic MX-2, but that didn't change anything. Does it also help to change the paste on the inside? What else is there to try?
I had a similar problem. Mine were off by 4 to 5 degrees. I used the same paste as you, but went one step further and did one of the inside heatsinks, before I ran out paste. I have more on the way. The inside heatsinks have hundreds of thermal paste dots over the whole surface, so it was a challenge to try and spread the paste around. The results were that the blades are now within 2 degrees of each other, but the unit still struggles to pull 440gh/s, drops over time, and can't be overclocked without lower hash rates and Xs and -s showing up. After the paste gets here, I will redo the other blade and see if it helps at all. On a side note, I have also installed heatsinks on the R47s and the little black chips above them, and it did not seem to help at all. At this point I'm a little nervous about them being in there. Thanks. Seems you have a similar problem as I do, just with a smaller temp diff. My problematic unit also doesn't OC well. I actually ran out of paste after just doing all the chips. Let me know if you see any improvement from repasting the backside of the other blade. Might get new paste and try that as well. If you say the temps dropped but you didn't see any improvement in speed it might not be the source of the problem actually.
|
|
|
|
IYFTech
|
|
August 16, 2014, 12:18:11 PM |
|
I do wish the BITMAIN would publish the device driver details so that a current version of cgminer could be attained. I know at least 2 releases in 4 had notes about queue improvements and one at least specifically stated it generated work much faster. Also one of the last 3's had an improvement about how work was loaded into devices. I know for sure 3.12 is very old and I am positive that many work generation improvements have been added since then.
Exactly. I don't understand why they don't work more closely with the cgminer devs - using such an old miner for this equipment is false economy. There have been many improvements & optimixations since this cgminer release, not to mention a very important fix for work redirection by a third party. Can we just SSH in to it and compile CGMiner to a newer version ? One would assume that we have access to their modified code and driver for cgminer which the cgminer license stipulates, however they have ignored our requests for making that code available. I am considering what direction to take now about that license violation. Indeed, I saw your post requesting access to the code - ignoring it seems a very strange course of action by Bitmain, especially since agreeing & cooperating would not only benefit everyone - but would also stay within the legally binding license terms....... I hope they realize their error & do the right thing - as well as live up to their claim of supporting the Bitcoin community. @ckolivas: Is there anything we, the community, can do to help? Maybe if we all started mailing them they will take notice?
|
|
|
|
JennaK
Newbie
Offline
Activity: 42
Merit: 0
|
|
August 16, 2014, 12:24:49 PM |
|
Hashrate - 5min:513.11G / 30min:493.11G / 1hr:487.73G O Is that alright for 237M?
|
|
|
|
Atomar
|
|
August 16, 2014, 12:27:19 PM |
|
I think that's what I have with the default settings. I think it should be more though
|
|
|
|
IYFTech
|
|
August 16, 2014, 12:29:02 PM |
|
Hashrate - 5min:513.11G / 30min:493.11G / 1hr:487.73G O Is that alright for 237M?
Yup
|
|
|
|
JennaK
Newbie
Offline
Activity: 42
Merit: 0
|
|
August 16, 2014, 12:30:50 PM |
|
I wish the Antminer monitor program worked but for some reason it gives a .net error.
|
|
|
|
elemental
Newbie
Offline
Activity: 49
Merit: 0
|
|
August 16, 2014, 12:35:56 PM |
|
One would assume that we have access to their modified code and driver for cgminer which the cgminer license stipulates, however they have ignored our requests for making that code available. I am considering what direction to take now about that license violation.
I have often wondered about this, it's really not on for a hardware manufacturer to misuse open source software in this way.
|
|
|
|
|