trucobit
Jr. Member
Offline
Activity: 756
Merit: 2
|
|
September 22, 2018, 12:33:43 PM |
|
Please can someone help me to be able to mine with Progpow, at least to be able to make a benchmark by mining a coin. I have tried BCI with the address of a "walllet" installed.
I have chosen the right miner propgprow nvidia miner. All apparently correct. Both in normal pools and in Suprnova. It gives me a mining error. It does not start, it says that I must choose the right miner, and he is chosen.
I have gone to managed Software and put it as Enabled to propgpow in its miner, although by default it should already be. The error is that neither stops, gives a direct error like that I have not chosen miner. This marking, everything is fine
What am I doing wrong?
hard to make of which settings details are wrong on your side, but I have mmine working, and the following are set pool: stratum+tcp://bci.suprnova.cc:9166 Worker name: username.workername (MPOS like MPH, create a worker on bci.suprnova.cc if needed) Worker password: (optional I believe, just leave default "x" if you want) Coin: BCI (I think WhatToMine has it in its API, ID: 245) Options -> Algorithms -> ProgPow checked Options -> Managed Software -> ProgPoW Nvidia Miner -> make sure ProgPow is enabled Profit Profile (Applicable) -> Mining software priority list -> ProgPoW Nvidia Miner Checked Profit Profile -> Customize -> ProgPow in Algorithm checked (Optional) Profit Profile -> Algorithm specific settings -> Mining Software -> ProgPoW Nvidia Miner (default Priority via Priority list supposed to be fine but just in case) I suspect one of the last 3 steps might be incorrect on your end or your settings at the pool needs to be checked. Profit Profile -> Customize -> ProgPow in Algorithm checked It was just that. Everything was fine, but in profit profile I had forgotten to mark it. Sometimes I fool. Thank you very much, I knew you were going to answer me. Thank you. With everything that I handle in the AM, and had not fallen in that detail, sometimes we all sin of fools. Can you change intensity to this miner?
|
|
|
|
|
|
Even in the event that an attacker gains more than 50% of the network's
computational power, only transactions sent by the attacker could be
reversed or double-spent. The network would not be destroyed.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
ayiphelmy
Copper Member
Full Member
Offline
Activity: 416
Merit: 105
|
|
September 22, 2018, 05:55:16 PM |
|
ethminer not running for amd when i try to benchmark it stop it self... any clu for resolve this problem?
|
|
|
|
moppidoo
Jr. Member
Offline
Activity: 348
Merit: 5
|
|
September 23, 2018, 05:00:15 AM |
|
Profit Profile -> Customize -> ProgPow in Algorithm checked
It was just that. Everything was fine, but in profit profile I had forgotten to mark it.
Can you change intensity to this miner?
glad you got it sorted. not sure about intensity, but maybe you can try the --cuda-parallel-hash <1 2 .. 8> (default 4), there are others that sets worksize and grid size too, check --help for more commands
|
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1094
|
|
September 24, 2018, 07:51:38 PM |
|
Hi, can you add $BCD - @BitcoinDiamond to coins/algos, please? It is running on Zergpool already. Thanks a lot for really brilliant support M. Yes- BCD will be included in the next release.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1094
|
|
September 24, 2018, 07:58:43 PM |
|
Is it possible to make a storage of miner programs on the control computer from which to distribute updated miners to the extended clients. This would greatly simplify the task of updating a large number of miners
It should be possible to configure the path to mining software via the Options dialog, Managed Software section. Instead of a download URL starting with "http", you can specify a Windows file share like "\\somecomputer\Ccminer-something-1.0.zip". The result is that all Remote Agents will use this file share to get the ZIP file. And if there is a password for access to Windows customers will not be able to get to download the miner? Password protected shares are unfortunately not supported right now.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1094
|
|
September 24, 2018, 08:00:39 PM |
|
Hello Patrike,
Can you please provide me a link to "AwesomeMinerRemoteService.msi" version 5.5.1
I've delete it by mistake and cant upgrade / update to the newer version without it.
The "Upgrade remote Agent" function doesn't work.
In case Windows is unable to perform an upgrade or uninstallation, please use this tool from Microsoft to force the removal. https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed-or-removedI've not found the root cause for this issue, but for some users it looks like it's related to when Window Update has been running.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1094
|
|
September 24, 2018, 08:02:58 PM |
|
+1 for sxemini
I use the same software for busrt mining too. I have to kill the agent and open it has administrator to be fine. I tried with scheduled task and in a shortcurt run as admin and put it in startup but that doesn't work. Must be run it manually if I rebooted the computer.
Thanks
Francis
Windows Task Scheduler should be the correct way of doing it. Is the process starting correctly via the Task Scheduler if you manually select it and perform a Run operation?
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1094
|
|
September 24, 2018, 08:03:53 PM |
|
WildRig Multi 0.11.6 Beta is Becoming Even More Useful Multi-algorithm Miner
Hi Patrike, +1 for integrating it into AM The miner is somewhat using compatible commandline + API as XMRig so I could add it to AM as custom software without issue. But reading from the API seemed to have a bit of issue with the hashrate units so far. eg, mining HMQ1725, API reports hashrate of 5000 kH/s, but AM is reading 5 kH/s FYI. edit: it applies to tribus, bcd as well (i suspect all) that kH/s are all parsed as H/s I will take a look at this one. Thanks for your suggestions.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1094
|
|
September 24, 2018, 08:39:33 PM |
|
ethminer not running for amd when i try to benchmark it stop it self... any clu for resolve this problem?
Is Ethminer working fine outside the Benchmark, but during benchmark the miner console window close down right away? Can you find out the command line Awesome Miner used for the benchmark (you need to review the log file to find it).
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1094
|
|
September 24, 2018, 08:54:55 PM |
|
For the new mining software versions (z-enemy, t-rex), it looks like some of these releases are not published on Bitcointalk or any official web site. For the moment I only include software versions where I'm able to verify the source.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
Allo-4ka
Newbie
Offline
Activity: 71
Merit: 0
|
|
September 25, 2018, 09:41:57 AM |
|
patrikehere are a couple of nuances - When choosing a coin to display at the bottom - Scrolling on the mouse does not work - The balance through the API ZCL can be taken from here https://api.zcha.in/v2/mainnet/accounts/- The new ICO coin https://yadi.sk/d/_2ZrfhxI3WoaXx- options -> pool -> pool when you press the ENTER key, the window for configuring the pool does not open, but the OK button of the settings window itself is pressed (for a large change of pools this causes inconvenience)
|
|
|
|
sxemini
Member
Offline
Activity: 1558
Merit: 69
|
|
September 25, 2018, 12:11:53 PM |
|
+1 for sxemini
I use the same software for busrt mining too. I have to kill the agent and open it has administrator to be fine. I tried with scheduled task and in a shortcurt run as admin and put it in startup but that doesn't work. Must be run it manually if I rebooted the computer.
Thanks
Francis
Windows Task Scheduler should be the correct way of doing it. Is the process starting correctly via the Task Scheduler if you manually select it and perform a Run operation? I have found a solution for me. I open the file properties from AwesomeMiner.RemoteAgent.exe and go to the compatibility column, then set -> run as an admin -> press ok. now the remotecontrol start as admin and i can start the new burstminer version without any problems.
|
|
|
|
MHyza
Newbie
Offline
Activity: 36
Merit: 0
|
|
September 25, 2018, 02:19:07 PM |
|
Oficial T-Rex 0.6.10 https://bitcointalk.org/index.php?topic=4432704.0;allRelease notes 0.6.10 Speed improvements: x16r/s, x17, c11, bitcore, bcd, sonoa - 1-2% Add functionality for setting failover pools in cmd line by specifying -o, -u and -p arguments multiple times. New cmd line arguments: --gpu-report-interval: controls how often GPU report stats are displayed (by default every 5th share). --no-color: disable coloured output --time-limit: maximum time to mine before exiting the program. --quiet: disable GPU stats output Add ability to change averaging hashrate window and GPU report interval via API or web browser on the fly (without stopping the miner) - see the help file. Bug fixes: Hung/freeze issues Invalid shares on x16r Long log path issue on Linux "extranonce subscribe timed out" on suprnova pools Cosmetic changes: Showing configured pools upon start up Displaying colour representation of hashorders for x16r/s Miner uptime is displayed as part of GPU stats report
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1094
|
|
September 25, 2018, 07:51:21 PM |
|
Awesome Miner version 5.6
ASIC mining - All SSH and Antminer operations are supported via the Remote Proxy when using a large number of ASIC miners - More fail safe parsing of pool information from Antminers with custom firmware where invalid pool entries are returned - Upgrading the version of Remote Proxy via Awesome Miner made possible in the same way a Remote Agent can be upgraded - Improved Auto Discovery of miners via Remote Proxy GPU mining - Benchmark dialog improved to show the hashrate in gray if the mining software didn't have the highest hashrate value compared to other software - Benchmark includes power usage for some nVidia based mining software (e.g. ccminer) - Remote Agent on Linux can be configured with a password using the command line /setpassword=mypass - When mining with EWBF Equihash Miner, the parameter '--pers auto' will no longer be added by default. It will only be added when mining on Zergpool. - Additional algorithms included by default, including BCD and Balloon Configuration - Increase maximum allowed value for the profit switching setting for minimum pool time - The Dashboard will by default show the number of ASIC miners in the ASIC section, instead of the total number of ASIC sub devices. To change back to previous behavior, go to the Options dialog, Dashboard & History section. Features - When using the built-in web interface with multi-user access, the users are now able to change the passwords directly via the web interface (only supported in new web interface). Configurable for each User Group. - A User Group can be configured to hide all pool information when accessing the web interface - Access the Remote Agent log file via the Awesome Miner toolbar: Tools -> Log File -> Remote Agent log file User interface - Profit profile Properties dialog improved with new selection options for the list of mining software - Display miner API identifier on the summary tab. This is the unique identifier for the miner when accessed via the Awesome Miner HTTP API. Rules and API - Profit Profile can be set for a miner using the Awesome Miner HTTP API - Added Coin Trigger for detecting coin difficuly, network hashrate and exchange rate - Added Antminer API Access action to be used by rules Mining software - Added mining software: ProgPow Miner 0.15 for AMD and nVidia - Added mining software: EthMiner 0.16.0 rc1 for AMD and nVidia - T-Rex miner 0.6.10 - Z-enemy miner 1.20 - JCE CPU Miner 0.32m - SgMiner-gm 5.5.5 - SgMiner-kl 1.0.6 - PhoenixMIner 3.5d - Bminer 10.3 Corrections - Correction to Remote Agent on Linux where the path wasn't set correctly when starting mining software - Correction to profit switcher where a change to Sgminer didn't work under certain conditions - Minor corrections
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
stolarzz
Newbie
Offline
Activity: 111
Merit: 0
|
|
September 26, 2018, 10:33:00 AM |
|
I can't get to work T-Rex as managed miner, it always cut 2 letters from stratum. What is wrong? It's from the begining when you added t-rex to your software. Other miners working without any problems. https://preview.ibb.co/eHLi6p/t_rex.jpgSecond thing as profit switching it works with zergpool or nicehash.
|
|
|
|
soothaa
|
|
September 26, 2018, 02:22:26 PM Last edit: September 26, 2018, 02:43:03 PM by soothaa |
|
Good morning Patrike, I searched the thread but didn't find anything, is custom software not working a known issue/currently unsupported? Log just in case: 9/26/18 4:09:16 PM.983 [015] [S]Creating start script: teamredminer-v0.3.1/awesome-start.sh, Command: "/teamredminer-v0.3.1/teamredminer" -a lyra2z -o stratum+tcp://us-east.lyra2z-hub.miningpoolhub.com:20581 -u soothaa -p x &> "/root/.local/share/AwesomeMinerService/diag.txt" 9/26/18 4:09:16 PM.983 [015] [E]System.IO.DirectoryNotFoundException: Could not find a part of the path '/root/awesomeminer-remoteagent/teamredminer-v0.3.1/awesome-start.sh'. 9/26/18 4:09:16 PM.984 [015] [E] at Interop.ThrowExceptionForIoErrno(ErrorInfo errorInfo, String path, Boolean isDirectory, Func`2 errorRewriter) at Microsoft.Win32.SafeHandles.SafeFileHandle.Open(String path, OpenFlags flags, Int32 mode) at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize) at System.IO.File.WriteAllText(String path, String contents) at AwesomeMiner.Service.Core.Platform.Linux.LinuxPlatform.StartProcess(Process #=zv__WGZ0=, ProcessStartInfo #=zdPS8LVM=, String #=z2b3yf$oZEex0FmqTiw==, Boolean #=zREX9rCo=, Int32 #=zS06iFtejHpu_) at AwesomeMiner.Service.Core.Engines.MinerEngine.Start(Int32 #=z5nvw3qTCuwIL, Boolean #=zLHkkxfA=, Boolean #=z$OmsJp0=, BenchmarkCommand #=zlkqcF4pscWCtVjbkLg==) 9/26/18 4:09:16 PM.984 [015] [E][ManagedMiner#20 - random] Failed to start miner process: Could not find a part of the path '/root/awesomeminer-remoteagent/teamredminer-v0.3.1/awesome-start.sh'. 9/26/18 4:09:16 PM.984 [015] [S][ManagedMiner#20 - random] Failed to start miner in Diagnostics mode 9/26/18 4:09:16 PM.984 [015] [S][ManagedMiner#20 - random] Diagnostics completed
Normal log 9/26/18 4:22:58 PM.488 [016] [S]Command request: Start 9/26/18 4:22:58 PM.489 [005] [S][ManagedMiner#20 - random] Execute command: Start 9/26/18 4:22:58 PM.489 [005] [S][ManagedMiner#20 - random] Starting... 9/26/18 4:22:58 PM.489 [005] [S][ManagedMiner#20 - random] Starting Mining Software 9/26/18 4:22:58 PM.489 [005] [S][ManagedMiner#20 - random] Setting up Miner Engine. Instance: 1 9/26/18 4:22:58 PM.489 [005] [S][ManagedMiner#20 - random] Engine Type: 8, Auto Download: False, EnginePath: teamredminer-v0.3.1/teamredminer, Subtype: Disabled, CustomExecutable: 9/26/18 4:22:58 PM.489 [005] [S]EngineSetup: 8 9/26/18 4:22:58 PM.489 [005] [S][ManagedMiner#20 - random] : Adding pool: stratum+tcp://us-east.lyra2z-hub.miningpoolhub.com:20581 9/26/18 4:22:58 PM.490 [005] [S]Set execution permission for: teamredminer-v0.3.1/teamredminer chmod: cannot access 'teamredminer-v0.3.1/teamredminer': No such file or directory 9/26/18 4:22:58 PM.496 [005] [S][ManagedMiner#20 - random] teamredminer-v0.3.1/teamredminer -a lyra2z -o stratum+tcp://us-east.lyra2z-hub.miningpoolhub.com:20581 -u soothaa -p x (WindowMode: ConsoleFormat, EngineType: 8, IsProfitMiner: False) 9/26/18 4:22:58 PM.496 [005] [S][ManagedMiner#20 - random] Configuration:
9/26/18 4:22:58 PM.496 [005] [S]Setting environment: GPU_FORCE_64BIT_PTR=1 9/26/18 4:22:58 PM.496 [005] [S]Setting environment: GPU_MAX_HEAP_SIZE=100 9/26/18 4:22:58 PM.496 [005] [S]Setting environment: GPU_USE_SYNC_OBJECTS=1 9/26/18 4:22:58 PM.496 [005] [S]Setting environment: GPU_MAX_ALLOC_PERCENT=100 9/26/18 4:22:58 PM.496 [005] [S]Setting environment: GPU_SINGLE_ALLOC_PERCENT=100 9/26/18 4:22:58 PM.496 [005] [S]Creating start script: teamredminer-v0.3.1/awesome-start.sh, Command: "/teamredminer-v0.3.1/teamredminer" -a lyra2z -o stratum+tcp://us-east.lyra2z-hub.miningpoolhub.com:20581 -u soothaa -p x 9/26/18 4:22:58 PM.497 [005] [E]System.IO.DirectoryNotFoundException: Could not find a part of the path '/root/awesomeminer-remoteagent/teamredminer-v0.3.1/awesome-start.sh'. 9/26/18 4:22:58 PM.497 [005] [E] at Interop.ThrowExceptionForIoErrno(ErrorInfo errorInfo, String path, Boolean isDirectory, Func`2 errorRewriter) at Microsoft.Win32.SafeHandles.SafeFileHandle.Open(String path, OpenFlags flags, Int32 mode) at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize) at System.IO.File.WriteAllText(String path, String contents) at AwesomeMiner.Service.Core.Platform.Linux.LinuxPlatform.StartProcess(Process #=zv__WGZ0=, ProcessStartInfo #=zdPS8LVM=, String #=z2b3yf$oZEex0FmqTiw==, Boolean #=zREX9rCo=, Int32 #=zS06iFtejHpu_) at AwesomeMiner.Service.Core.Engines.MinerEngine.Start(Int32 #=z5nvw3qTCuwIL, Boolean #=zLHkkxfA=, Boolean #=z$OmsJp0=, BenchmarkCommand #=zlkqcF4pscWCtVjbkLg==) 9/26/18 4:22:58 PM.498 [005] [E][ManagedMiner#20 - random] Failed to start miner process: Could not find a part of the path '/root/awesomeminer-remoteagent/teamredminer-v0.3.1/awesome-start.sh'. 9/26/18 4:22:58 PM.498 [005] [E][ManagedMiner#20 - random]Failed to start miner
The command is correct except for the user part which I can correct.. just looks like that batch file isn't being made for some reason... EDIT: looks like AM is confused about what path to use? 9/26/18 4:26:26 PM.927 [005] [E][ManagedMiner#20 - random] Failed to start miner process: Could not find a part of the path '/root/awesomeminer-remoteagent/teamredminer-v0.3.1/awesome-start.sh'.
Looks like it's trying to access the program directory and not the /root/.local/share/AwesomeMinerService path where the files were uploaded EDIT2: confirmed. cp -r teamredminer-v0.3.1/ /root/awesomeminer-remoteagent
9/26/18 4:29:42 PM.040 [006] [S]Creating start script: teamredminer-v0.3.1/awesome-start.sh, Command: "/teamredminer-v0.3.1/teamredminer" -a lyra2z -o stratum+tcp://us-east.lyra2z-hub.miningpoolhub.com:20581 -u soothaa -p x 9/26/18 4:29:42 PM.040 [006] [S]Set execution permission for: teamredminer-v0.3.1/awesome-start.sh 9/26/18 4:29:42 PM.042 [006] [S]StartInfo Arguments: -dmS awesome0001 "teamredminer-v0.3.1/awesome-start.sh" 9/26/18 4:29:42 PM.524 [006] [S]Running screens: There is a screen on: 12404.awesome0001 (09/26/2018 04:29:42 PM) (Detached) 1 Socket in /var/run/screen/S-root.
9/26/18 4:29:42 PM.524 [006] [S]Found Screen PID: '12404' 9/26/18 4:29:42 PM.530 [006] [S]Found Shell PID: 0
Miner crashes shortly after, probably a config on my end EDIT3: Okay looks like the bash script has an issue: root@simpleminer:~/awesomeminer-remoteagent/tdxminer-v0.2.2.2# cat awesome-start.sh #!/bin/bash
export GPU_FORCE_64BIT_PTR=1 export GPU_MAX_HEAP_SIZE=100 export GPU_USE_SYNC_OBJECTS=1 export GPU_MAX_ALLOC_PERCENT=100 export GPU_SINGLE_ALLOC_PERCENT=100
"/tdxminer-v0.2.2.2/tdxminer" -a lyra2z -o stratum+tcp://us-east.lyra2z-hub.miningpoolhub.com:20581 -u soothaa.random -p x root@simpleminer:~/awesomeminer-remoteagent/tdxminer-v0.2.2.2# ./awesome-start.sh ./awesome-start.sh: line 9: /tdxminer-v0.2.2.2/tdxminer: No such file or directory root@simpleminer:~/awesomeminer-remoteagent/tdxminer-v0.2.2.2# cd .. root@simpleminer:~/awesomeminer-remoteagent# tdxminer-v0.2.2.2/awesome-start.sh tdxminer-v0.2.2.2/awesome-start.sh: line 9: /tdxminer-v0.2.2.2/tdxminer: No such file or directory
|
|
|
|
svedr
Newbie
Offline
Activity: 27
Merit: 0
|
|
September 26, 2018, 04:53:11 PM |
|
Hello! I want mine with my GPU StelliteCoin (XTL) I add coin Stellite, CryptoNight StelliteV4 , but in profit i not see this algo.....
Please for help...
|
|
|
|
|
CryptoSDesigner
Copper Member
Member
Offline
Activity: 245
Merit: 26
High quality Design for Cryptocurrency
|
|
September 27, 2018, 12:28:46 AM |
|
Can you please add support automatic switching Algo in Baikal X10
|
|
|
|
|