[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[baf28]

BTG coin all pool and all share REJECT.

I manually added the parameters to the pool: --algo 144_5 --pers BgoldPoW
After that everything worked perfectly.
Please, please correct the settings of the BTG Minging.

[1715101330]

1715101330

[BabelFish]

Hi Patrike,

I downloaded the update.

I can confirm that the new version works with Phoenix Miner.

[msallak1]

Is there any plan to add "lyclMiner" AMD miner for Layra2rev2
https://github.com/CryptoGraphics/lyclMiner/releases

[yrk1957]

Awesome Miner Version 5.3

...
- iBeLink DSM6T ASIC supported
...

Thanks for trying to fix this, but this is reporting hash-rate in GH/s whereas the actual value is TH/s. So its off by a factor of 1000.

I wished you had asked me for detailed API report before trying to fix this. Now even my proxy is broken.

[ushakov]

Hi. If you add more than 16 pools in a poolgroup (Ethash algoritm), Awesome Miner is not showing statistics for Claymore Dual Etherium Miner, it displays "offline Interface", at this time mining is working fine.

[patrike]

For some reasons i cant use the new equihash algos. I selected the miners especially EWBF Equihash miner 0.3 in my profit switch profile and the algortihms...but they dont show up in the Benchmark window. In the benchmark window the right profit profile is selected. The normal Equihash shows up just not the other ones. Am im missing something?

Most mining software doesn't support benchmark mode, and for that reason a pool must be used for the benchmark. Can you please check that you have made a Equihash BTG pool (for example) available to the profit switcher in the Options dialog, Profit switching section?

[patrike]

Hi Patrik,

since we have updated AM to Version 5.2.5, we have the issue, that many of our Antminer L3+ cannot be controlled through API commands (and so the Profit-Switching is not working anymore) the miner shows API Access: Privileged in the Summary Tab - but cannot be for example restarted through AM?!
we tried also to Configure API access through the AM-Tools - the program returns OK - but nothing changes...

do you have an idea?!

BR Ralf

Hi Ralf,

If you select a miner, is it that toolbar buttons like Restart and similar is disabled? That can happen in two scenarios:

1) The miner is Restricted API mode. You have however already confirmed that it's Privileged API.

2) Awesome Miner is busy sending other commands to this miner. It can be that you have defined a rule that constantly sends commands to this miner. You can typically detect this by looking in the Awesome Miner log file (toolbar: Tools -> Log File), where you will fine entries saying "Rule execute" and possible additional information about what commands that are being sent to the miners.

Hi Patrik,

thank you very much!! it was a rule - actually i tried to resolve a problem with Antminer A3-Miners - they go offline sometimes (maybe all 2 to 3 days once) and when i reboot them from the browser - or when i go to tools-antminer and choose configure api access again - the miner reboots and afterwards working again...
i tried to make a rule, where i go through API-Command restart (*) - would actually working - but i don't find the right event to trigger the rule?! do you have a suggestion??

BR Ralf

The Miner Command can send a reboot command to the mining process, but based on your description it sounds like it's really a reboot you want. Use the "SSH Command" action and specify Reboot.
You can use the predefined rule called "Offline Detection" and define an action to reboot.

[patrike]

Hopefully an easy question:

On the Dashboard and Miner tabs it shows the revenue and profit per day per miner.  However, the values are based on the 5s hashrate instead of the Avg.  So, the values wildly vary.  Is there anyway to change it to use the Avg hashrate value instead of the 5s ?

Thanks!

This is not configurable today - only the current hashrate is used for the Dashboard.

What I plan for the future is a more flexible way of defining dashboard elements, probably similar to the feature "Customize progress field" where you can write your own expressions about what to display.

[patrike]

Hi Dev Team,

Do you have any plans to built in support for CoinBase wallets via API maybe. As there is no BTC address associated with Account on CoinBase, only for Send/Receive BTC's.

Yes, I've had a few requests on this. The balance of the Coinbase wallets are not visible via the public blockchain, so you are correct that Awesome Miner would need to support their API's.

If anyone figures out an URL that would return the Coinbase balance information, it might be possible to make it work with the existing Wallet Balance feature in Awesome Miner - as it can take any URL that returns the balance.

[patrike]

Is there any developments on a Zhash miner for AMD cards? Thankyou for your hard work

Right now Awesome Miner only supports EWBF Equihash nVidia miner for ZHash. Please let me know if there are any popular AMD mining software (with a monitoring interface) that I should consider as well. Thanks!

Thanks for the response. The only one thats popped up on my radar is lolMiner, which still seems to be in early dev.

https://bitcointalk.org/index.php?topic=2933939.0

https://forum.bitcoingold.org/t/amd-miners-we-didnt-forget-you/1698

Thanks for the information. lolminer will probably be supported once they provide a monitoring interface (API) that Awesome Miner can use.

[patrike]

Hello Patrike again, 2 things.

1.- In the coin tab, the profit of the pool is not applied, so if I indicate 1.5 to a pool that is equal to 50% more, this is not reflected in Coin, and I think it is very logical that The figure corresponds to the one modified by the profit.

2.- This is a suggestion. It would be ideal to have a function that told me every 24 hours, how many times a currency has changed, and then to know the percentage of time mined in each ALGO. It is very useful because if it changes too much I have to change the configuration, and knowing the time of mining by ALGO, helps me to decide which one to deactivate or not.

1) I would say that the current behavior is correct, to not let the pool profit factor impact the coin profit. You can have a coin that you mine on two different pools. You can then have factor 1.0 on one pool and 1.1 on another pool. What would the coins tab show?

Instead, if you always want the profitability of a coin to be higher, you should set the profit factor on the coin instead of on the pool. If you select a coin and open the properties for it, you can configure the profit factor for the coin itself. Then it will be applied to the coin itself.

2) I agree with your point here and this will most likely be supported in the future.

[patrike]

Having issues on a fresh install with 5.3, even with --gpu-platform 1 set as a command line option for sgminer, it's still trying to use my NVIDIA cards in an AMD/NVIDIA rig.

Can you try with --gpu-platform 2 as well? Sgminer can sometimes pick up built-in Intel devices as platform 0, and if you have both nVidia and AMD, you might have both 0, 1 and 2 as possible values.

[patrike]

Is it possible to use ethminer instead of claymore ethereum miner for managed profit miners? I've been trying with profit profiles but can't do it so far.

Ethminer isn't supported by Awesome Miner right now, and I've not yet explored how to integrate it. Maybe there are some other users here that have more experience in this?

[patrike]

I'm pretty sure Coinwarz is not working well with AW. I have placed Coinzwar in first place in statistics, also I have paid to have more requests, they are only $ 10.

And looking at the Coin tab, there is not a single coin that indicates that it is coinwarz, and that this first.

Coinwarz has many rare coins that are not in WTM or CC. But they do not appear, please I could review that. I do the test and it gives me correct, I have 100,000 requests daily and I see that I have not spent any, so AW does not collect data from Coinwarz, something is broken.

I've just tested with Coinwarz and my API key, and I do get about 50 coins from them and it looks fine. Do you get any specific message when you use the "Test" button in the Options dialog, Statistics section, for the Coinwarz API setting?

[patrike]

BTG coin all pool and all share REJECT.

I manually added the parameters to the pool: --algo 144_5 --pers BgoldPoW
After that everything worked perfectly.
Please, please correct the settings of the BTG Minging.

If you have coincalculators.io as your primary coin source, they have BTG listed as Zhash which isn't fully correct. It should be "Equihash BTG", which includes some personalization. WhatToMine is correct here.

Awesome Miner has a feature whre the algorithm can manually be overridden for a specific coin. To override the algorithm for a coin, open the Options dialog, Statistics section and use the setting for Override coin algorithms. I think that if you define BTG here as "Equihash BTG", Awesome Miner will launch EWBF software with the correct parameters.

[patrike]

Is there any plan to add "lyclMiner" AMD miner for Layra2rev2
https://github.com/CryptoGraphics/lyclMiner/releases

I've not had a chance to really look into this one in detail, but they didn't provide any documentation about a monitoring API.

[patrike]

Awesome Miner Version 5.3

...
- iBeLink DSM6T ASIC supported
...

Thanks for trying to fix this, but this is reporting hash-rate in GH/s whereas the actual value is TH/s. So its off by a factor of 1000.

I wished you had asked me for detailed API report before trying to fix this. Now even my proxy is broken.

I will correct the hash rate unit issue in the next update. For some reason, more and more ASIC's being released are reporting hash rates with incorrect unit (MH/s, GH/s, TH/s) in their API's, and Awesome Miner needs first to figure out which ASIC miner it's connected to (not always a trivial operation) and then adjust all hash rates.

This specific ASIC didn't report any current hash rate (the 5s value), so in version 5.3, Awesome Miner calculated it as the sum of all individual device hash rates. I don't have any details on what your proxy is doing, so I cannot really tell what impact to expect.

If you find out any other issues with what is being reported for this miner, please let me know. Thanks!

[trucobit]

I'm pretty sure Coinwarz is not working well with AW. I have placed Coinzwar in first place in statistics, also I have paid to have more requests, they are only $ 10.

And looking at the Coin tab, there is not a single coin that indicates that it is coinwarz, and that this first.

Coinwarz has many rare coins that are not in WTM or CC. But they do not appear, please I could review that. I do the test and it gives me correct, I have 100,000 requests daily and I see that I have not spent any, so AW does not collect data from Coinwarz, something is broken.

I've just tested with Coinwarz and my API key, and I do get about 50 coins from them and it looks fine. Do you get any specific message when you use the "Test" button in the Options dialog, Statistics section, for the Coinwarz API setting?

https://www.dropbox.com/s/i5imtmqu12aokdb/Captura%20de%20pantalla%202018-07-08%20a%20las%2019.45.48.png?dl=0

when using the TEST button it tells me that I have 100,000 requests and left -1, but that -1 is always there. I even think that before paying I did not receive coins either. It may be that your integration of the api does not take into account the payment api ?. I have paid to ask for many coins, as I hope they will pay in WTM and CC, to be able to request every 2 minutes.

And I told you that I put coinwarz first in the list, since they are so rare coins that are not in the others. I go to the COIN tab and I do not have a single coin that indicates that it comes from Coinwarz, only Coincalculator, whatomine and the ones I add for AW CU that does not put the source.

I have deactivated Wtm and CC, I only have the coins that I have added for AW CU, it does not appear anywhere that puts COINWARZ

[patrike]

I'm pretty sure Coinwarz is not working well with AW. I have placed Coinzwar in first place in statistics, also I have paid to have more requests, they are only $ 10.

And looking at the Coin tab, there is not a single coin that indicates that it is coinwarz, and that this first.

Coinwarz has many rare coins that are not in WTM or CC. But they do not appear, please I could review that. I do the test and it gives me correct, I have 100,000 requests daily and I see that I have not spent any, so AW does not collect data from Coinwarz, something is broken.

I've just tested with Coinwarz and my API key, and I do get about 50 coins from them and it looks fine. Do you get any specific message when you use the "Test" button in the Options dialog, Statistics section, for the Coinwarz API setting?

https://www.dropbox.com/s/i5imtmqu12aokdb/Captura%20de%20pantalla%202018-07-08%20a%20las%2019.45.48.png?dl=0

when using the TEST button it tells me that I have 100,000 requests and left -1, but that -1 is always there. I even think that before paying I did not receive coins either. It may be that your integration of the api does not take into account the payment api ?. I have paid to ask for many coins, as I hope they will pay in WTM and CC, to be able to request every 2 minutes.

And I told you that I put coinwarz first in the list, since they are so rare coins that are not in the others. I go to the COIN tab and I do not have a single coin that indicates that it comes from Coinwarz, only Coincalculator, whatomine and the ones I add for AW CU that does not put the source.

I have deactivated Wtm and CC, I only have the coins that I have added for AW CU, it does not appear anywhere that puts COINWARZ

Can you verify the following:

1) Please make sure that you don't have any blank spaces or similar at the end of the Coinwarz API key you entered in Awesome Miner

2) Can you please test the Coinwarz integration by opening a web browser and enter the following URL. Replace 'x' with your Coinwarz API key.
http://www.coinwarz.com/v1/api/profitability/?apikey=x&algo=all

This is the URL Awesome Miner uses to get information about all coins. Do you get a something that looks like coin statistics, or simply some error message?

[Odatas]

For some reasons i cant use the new equihash algos. I selected the miners especially EWBF Equihash miner 0.3 in my profit switch profile and the algortihms...but they dont show up in the Benchmark window. In the benchmark window the right profit profile is selected. The normal Equihash shows up just not the other ones. Am im missing something?

Most mining software doesn't support benchmark mode, and for that reason a pool must be used for the benchmark. Can you please check that you have made a Equihash BTG pool (for example) available to the profit switcher in the Options dialog, Profit switching section?

Every pool in the profit miner is enabled....the only thing i didnt enable was a custome pool.