[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[patrike]

PLEASE ADD BITTUBE COIN for AMD with CAST XMR....

Thankyou  

CastXMR 1.3 and CryptoNight Saber will be included in the next development version, planned to be available within the next 1 - 2 days.

I can also point of a new feature available in the latest development version (5.2.4), where you can specify where Awesome Miner should download the mining software from.

If the automatic download feature in Awesome Miner is on CastXMR 1.2.5 as in the example below, you can change that to point to version 1.3.0 instead. With this change, Awesome Miner will download and run the 1.3.0 version instead.

Earlier you could of course manually download the software and then upload it to your miners, but this process should make it a bit easier as it's based on the automatic download concept.

Please go to the Options dialog, Managed Software section, and edit CastXMR as illustrated in the screenshot below.

[crazydane]

You can configure Awesome Miner to show the chip temperature in the list of miners. Go to the Options dialog, General section and enable "Display Antminer chip temperature in Status column".

Also note that the rules in Awesome Miner (the Temperature Trigger) can be configured to either use the PCB temperature or the Chip temperature.

That did the trick.  Thanks!

[crazydane]

Remote Agent on Linux is currently being developed. I have a prototype running already, and I expect to have a public beta version available next month. Right now it only provides automatic download of a very limited number of mining software, the overclocking feature isn't available and there are a few other implementation items to sort out.

This is exciting news!  I'm currently running a mix of Windows rigs controlled by AM and Linux rigs controlled by HIVE OS.  I also ran nvOC for a while, but the lack of central management with a lot of rigs was a challenge.  While HIVE has a nice dashboard and pushing changes to a lot of rigs at once is nice, there is no profit switching support, and the overall list of features compared to AM, is much smaller.

Is the Linux Remote Agent based on a particular distro?  Will be Agent be part of a complete image, or something the the user installs on top of an existing distro of their choice?  I would think the former would be preferred to "lock in" the environment and keep support enquirers down.

[patrike]

Remote Agent on Linux is currently being developed. I have a prototype running already, and I expect to have a public beta version available next month. Right now it only provides automatic download of a very limited number of mining software, the overclocking feature isn't available and there are a few other implementation items to sort out.

This is exciting news!  I'm currently running a mix of Windows rigs controlled by AM and Linux rigs controlled by HIVE OS.  I also ran nvOC for a while, but the lack of central management with a lot of rigs was a challenge.  While HIVE has a nice dashboard and pushing changes to a lot of rigs at once is nice, there is no profit switching support, and the overall list of features compared to AM, is much smaller.

Is the Linux Remote Agent based on a particular distro?  Will be Agent be part of a complete image, or something the the user installs on top of an existing distro of their choice?  I would think the former would be preferred to "lock in" the environment and keep support enquirers down.

The first release will not be a distribution at all, just a file you download, extract and install. This will make sure Remote Agent is automatically started when Linux is booting. You should be able to run it on anything that's based on Ubuntu, including running it on top of HiveOS.

Creating a new Linux distribution is a larger task and will probably not be a focus area for this year. So far everyone that asked for Remote Agent on Linux already have some kind of mining setup running on Linux.

[sxemini]

Hi Patrike,

can you take a look at lolminer for equihash 144.5 for nvidia and amd cards.

https://bitcointalk.org/index.php?topic=4591317.0

Do you add equihash 144.5 and 197.2 in the next release?

Feature request:

Is it possible to make a button in managed miner properties, to save this as a managed template?
I test new configuration on 1 Rig and when all fine, i make a managed template and add it to all other rigs, but i need make the configuration 2 times at the moment.

Thanks

[svedr]

[/quote]
CastXMR 1.3 and CryptoNight Saber will be included in the next development version, planned to be available within the next 1 - 2 days.


[/quote]

Super, Thankyou   

[MHyza]

very thanks
CryptoDredge benchmark incorrect , i select 1 gpu benchmarking but value sum all gpu benchmarked .

Thanks for reporting this issue - it will be resolved in the next release. It turns out that ccminer uses --devices flag, while CryptoDredge expects --device

For Z-Enemy miner is the same issue, otherwise is working great (Z-enemy and CryptoDredge) so THANKS a LOT for that
M.

[toptek12]

Equihash 144,5 AMD Miner Now Available (LOLMiner)

works with AMD and NV

just a heads up I'm sure some will be asking for awesome miner support I'm not yet till I see how well it works. just letting others know encase they miss it.

https://bitcointalk.org/index.php?topic=4591317


https://www.youtube.com/watch?v=tSg9mORTuMU&feature=em-uploademail

[Tritech]

Is it possible to dual mine eth+keccak with claymore 11.8 with this? I know there isn't a default option but is there a way to manually add it?

[darkneorus]

Is it possible to dual mine eth+keccak with claymore 11.8 with this? I know there isn't a default option but is there a way to manually add it?

it's possible, but why would you want to do it?
dual mining is dead 

[Tritech]

Is it possible to dual mine eth+keccak with claymore 11.8 with this? I know there isn't a default option but is there a way to manually add it?

it's possible, but why would you want to do it?
dual mining is dead  

I know SIA and all the other old usual suspects have been killed off for dual mining. I'm looking for keccak specifically for XDNA dual mining. Can you show me where ETH+keccak dual mining would be? The only options I see are decred, sia, lbry, pascal, blake2s, and sha-3. Claymore 11.8 supports it.

[fredeq]

I know SIA and all the other old usual suspects have been killed off for dual mining. I'm looking for keccak specifically for XDNA dual mining. Can you show me where ETH+keccak dual mining would be? The only options I see are decred, sia, lbry, pascal, blake2s, and sha-3. Claymore 11.8 supports it.

Try sha-3, that might be keccak in disguise

[Tritech]

Doh! Thanks for giving a sleep deprived soul a helping hint 

[shap00]

hello guys! I am new to awesomeminer and i want to configure it with 20 s9s. Is there a way to configure a new pool with different worker names for all at once, or do i have to do it manually. if yes, how?
edit: found it, thanks

[Neat]

Hello ,

So, I need to add coolminer to Awesome miner to mine lyra2z. Is that possible?

Regards.

[svedr]

Is it possible to set profit switch threshold diferents for high limit or low ?
Example.... i wannt mine ETH, if is altcoin higher 30% switch miner to altcoin...

Now i have threshold 30%, but mine altcoin even if is it 29% lower then ETH...

Thank you

[Allo-4ka]

So, I need to add coolminer to Awesome miner to mine lyra2z. Is that possible?

->> FAQ

[patrike]

Hi Patrike,

can you take a look at lolminer for equihash 144.5 for nvidia and amd cards.

https://bitcointalk.org/index.php?topic=4591317.0

Do you add equihash 144.5 and 197.2 in the next release?

Feature request:

Is it possible to make a button in managed miner properties, to save this as a managed template?
I test new configuration on 1 Rig and when all fine, i make a managed template and add it to all other rigs, but i need make the configuration 2 times at the moment.

Thanks

Hi,
I couldn't find any information about that this software provides any monitoring interface (API), where Awesome Miner can get hashrate information and more. The only option would then be to add it as a Generic Miner:
http://www.awesomeminer.com/help/genericminer.aspx

Awesome Miner supports EWBF Equihash miner already. The algorithms are listed as Equihash Zero (197,2) and ZHash (144,5) in Awesome Miner. All these forks and numbers are getting a bit complex.

Good suggestion about saving to a Managed Template - that would make perfect sense. Thanks!

[patrike]

very thanks
CryptoDredge benchmark incorrect , i select 1 gpu benchmarking but value sum all gpu benchmarked .

Thanks for reporting this issue - it will be resolved in the next release. It turns out that ccminer uses --devices flag, while CryptoDredge expects --device

For Z-Enemy miner is the same issue, otherwise is working great (Z-enemy and CryptoDredge) so THANKS a LOT for that
M.

I couldn't reproduce the issue with z-enemy. It looks like it's accepting --devices, and the documentation for it also indicates --devices. Can you share more details on this?

[patrike]

Equihash 144,5 AMD Miner Now Available (LOLMiner)

works with AMD and NV

just a heads up I'm sure some will be asking for awesome miner support I'm not yet till I see how well it works. just letting others know encase they miss it.

https://bitcointalk.org/index.php?topic=4591317


https://www.youtube.com/watch?v=tSg9mORTuMU&feature=em-uploademail

Thanks for the update - let's keep an eye on this one. Please also see the other answer I just made here:
https://bitcointalk.org/index.php?topic=676942.msg41512708#msg41512708