[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[patrike]

snip..

If a pool is indicated as "Dead", it's considered Dead by the ASIC miner. Awesome Miner is simply displaying the pool connection status as reported by the Antminer, and Awesome Miner isn't related to this connection. However, I do agree that it sounds strange that it's reported as dead until you switch to it.

From what I can see in the log, Awesome Miner do send the commands to set pool priority to the Antminer as part of the profit switching:

Code:

7/31/2018 5:18:42 PM.973 [005] [S][ExternalMiner#15 - z9-12] Execute command: PoolCommand
7/31/2018 5:18:42 PM.982 [005] [S][ExternalMiner#15 - z9-12] Executing API command: PoolPriority 1,2,0

Can you test if the same operation works if you try it manually? On the Pools tab, click on the right side of the "Prioritize" button and select the menu item "Define Priority and Quota". Please give this feature a try as a troubleshooting step, as it also are sending the "PoolPriority" commands to the Antminers. You can look for "Executing API command: PoolPriority" in the log files when performing this operation.

The display of "Claymore" on the View Details tab is just a UI bug, and it will be corrected.

The "dead" thing is kind of interesting... long story short, I typo'd the "stratum+tcp://" part as "stratum+tcp//" (at least, i assume I did it...), so the 2nd and 3rd pool was showing as 'stratum+tcp://stratum+tcp//pool.name:port' in antminer. I didn't see this because of whatever bug causes the status page to stop working after I manually "change" a pool.

Oddly enough, these same definitions worked fine if I changed to a pool (which doesn't make sense either since the typo was there as well...).

net-net, looks like profit switching may be working now, the one I enabled has jumped to another coin as I was writing this up.

... and yeah, "prioritize" now works.

Is it possible to "prioritize" an entire group or selection? Perhaps on the miner->rightclick menu, could you add a "Prioritize" option?

-j

Thanks for the update. The Prioritize button only operates on a single selected miner. If you have multiple miners they may not have the same pools, but what you point out here might be for the scenario when then in fact do.

[1715475791]

1715475791

[1715475791]

1715475791

[1715475791]

1715475791

[patrike]

Error Report:

New TDXMiner Integration only supports 10 GPUs in the monitoring portal, even though all 13 are working. This was the same issue when I manually installed TDXMiner in the old ethos version. However, it also reports some working GPUs as 0.0 hash, even though the tailing output shows them working, and the pool shows the correct hashrate as well.

Awesome Miner doesn't have any specifc support TDXMiner. Can you share more details on this issue from an Awesome Miner point of view?

[patrike]

Awesome Miner Version 5.3.9 (Development preview of 5.4)

- Miner Tag trigger can be configured to trigger if a miner doesn't have the specified tag
- The profit switcher can be configured to ignore the current pool if the mining software crashed multiple times. Configurable via the Options dialog, Profit switching section.
- Improved threading performance when using larger number of miners and when executing commands on many miners at once
- Webhook actions can be configured for Basic Authentication
- WhatToMine custom URL's can point to sources with multiple coins
- Added execution option to run external commands as Administrator via the System tab
- Added option to reinitialize the GPU monitoring via the System tab
- Coins tab improved by separating Revenue and Profit into two separate columns that can be sorted individually
- Ensure miner hostnames cannot contain blank spaces
- Added variable support for webhook actions
- Disable MultiPool.us integration
- Zpool multiple region support
- Added YescryptR16 and Allium algorithms, including support in CpuMiner-Opt
- Added mining software: T-Rex nVidia GPU Miner
- T-Rex miner 0.5.6, including pool information when used as External Miner
- CryptoDredge 0.8
- EWBF Equihash Miner 0.5
- SRBminer 1.6.5, including CryptoNight Red algorithm
- Correction to coins per day calculations for some algorithms like Blake 2b
- Correction to SRBMiner configuration file entries related to GPU settings
- Correction to hash rate for latest firmware versions of Innosilicon A9 Zmaster miner. If an older firmware is used for this miner, please upgrade to the latest firmware version.
- Correction to the content of the miner and pool notification messages if the mining process doesn't start correctly
- Correction to miner commands not being executed correctly if launched in a sequence via the rules
- Correction to incorrect display of first pool in list for some GPU mining software
- Correction to rule for executing SSH commands
- Correction to hashrate parsing for a few of the GPU mining software, where incorrect processing could result in no mining information being displayed
- Minor corrections

Items in blue are updated since the last development preview.

To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates

Direct download links
http://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
http://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

[420sam]

I can't figure out how to get my batch file to start when Awesome Miner starts using X16r. The batch file works perfectly fine when I run it outside of the program. Please help.


https://imgur.com/a/ElbH3Xz

Contents of bat file:

nvidiaInspector.exe -setBaseClockOffset:0,0,175 -setBaseClockOffset:1,0,175 -setBaseClockOffset:2,0,175 -setBaseClockOffset:3,0,175 -setBaseClockOffset:4,0,175 -setBaseClockOffset:5,0,175 -setMemoryClockOffset:0,0,340 -setMemoryClockOffset:1,0,340 -setMemoryClockOffset:2,0,340 -setMemoryClockOffset:3,0,340 -setMemoryClockOffset:4,0,340 -setMemoryClockOffset:5,0,340 -setPowerTarget:0,80 -setPowerTarget:1,80 -setPowerTarget:2,80 -setPowerTarget:3,80 -setPowerTarget:4,80 -setPowerTarget:5,80  -setFanSpeed:0,100 -setFanSpeed:1,80 -setFanSpeed:2,80 -setFanSpeed:3,80 -setFanSpeed:4,75 -setFanSpeed:5,75 -setTempTarget:0,0,85 -setTempTarget:1,0,85 -setTempTarget:2,0,85 -setTempTarget:3,0,85 -setTempTarget:4,0,85 -setTempTarget:5,0,85

[400acres]

Error Report:

New TDXMiner Integration only supports 10 GPUs in the monitoring portal, even though all 13 are working. This was the same issue when I manually installed TDXMiner in the old ethos version. However, it also reports some working GPUs as 0.0 hash, even though the tailing output shows them working, and the pool shows the correct hashrate as well.

Awesome Miner doesn't have any specifc support TDXMiner. Can you share more details on this issue from an Awesome Miner point of view?

This is my stupidity. I posted this in the awesome miner thread instead of ETHOS thread. My apologies. Keep up the good work! I use your software under 2 different ultimate licenses for 2 separate farms. Keep up the good work!

[trucobit]

- Added variable support for webhook actions

@patrike I do not understand that function or how to use it, I could explain it and give me an example of use. Surely it will be of interest to more people.

Thank you

[Burnie]

I can't figure out how to get my batch file to start when Awesome Miner starts using X16r. The batch file works perfectly fine when I run it outside of the program. Please help.


https://imgur.com/a/ElbH3Xz

Contents of bat file:

nvidiaInspector.exe -setBaseClockOffset:0,0,175 -setBaseClockOffset:1,0,175 -setBaseClockOffset:2,0,175 -setBaseClockOffset:3,0,175 -setBaseClockOffset:4,0,175 -setBaseClockOffset:5,0,175 -setMemoryClockOffset:0,0,340 -setMemoryClockOffset:1,0,340 -setMemoryClockOffset:2,0,340 -setMemoryClockOffset:3,0,340 -setMemoryClockOffset:4,0,340 -setMemoryClockOffset:5,0,340 -setPowerTarget:0,80 -setPowerTarget:1,80 -setPowerTarget:2,80 -setPowerTarget:3,80 -setPowerTarget:4,80 -setPowerTarget:5,80  -setFanSpeed:0,100 -setFanSpeed:1,80 -setFanSpeed:2,80 -setFanSpeed:3,80 -setFanSpeed:4,75 -setFanSpeed:5,75 -setTempTarget:0,0,85 -setTempTarget:1,0,85 -setTempTarget:2,0,85 -setTempTarget:3,0,85 -setTempTarget:4,0,85 -setTempTarget:5,0,85

Did you forget to specify the path to your .exe? Windows/your bat file doesn't magically know where your exe is.
Try adding this to the top of your .bat file if your .exe is in the same folder:

Code:

cd %~dp0

[420sam]

I can't figure out how to get my batch file to start when Awesome Miner starts using X16r. The batch file works perfectly fine when I run it outside of the program. Please help.


https://imgur.com/a/ElbH3Xz

Contents of bat file:

nvidiaInspector.exe -setBaseClockOffset:0,0,175 -setBaseClockOffset:1,0,175 -setBaseClockOffset:2,0,175 -setBaseClockOffset:3,0,175 -setBaseClockOffset:4,0,175 -setBaseClockOffset:5,0,175 -setMemoryClockOffset:0,0,340 -setMemoryClockOffset:1,0,340 -setMemoryClockOffset:2,0,340 -setMemoryClockOffset:3,0,340 -setMemoryClockOffset:4,0,340 -setMemoryClockOffset:5,0,340 -setPowerTarget:0,80 -setPowerTarget:1,80 -setPowerTarget:2,80 -setPowerTarget:3,80 -setPowerTarget:4,80 -setPowerTarget:5,80  -setFanSpeed:0,100 -setFanSpeed:1,80 -setFanSpeed:2,80 -setFanSpeed:3,80 -setFanSpeed:4,75 -setFanSpeed:5,75 -setTempTarget:0,0,85 -setTempTarget:1,0,85 -setTempTarget:2,0,85 -setTempTarget:3,0,85 -setTempTarget:4,0,85 -setTempTarget:5,0,85

Did you forget to specify the path to your .exe? Windows/your bat file doesn't magically know where your exe is.
Try adding this to the top of your .bat file if your .exe is in the same folder:

Code:

cd %~dp0

That did it, thank you!

[Lunga Chung]

I use overdriveNtool for OC, does anyone know how to create delay between executing a bach file and starting a miner?

For some reason sometimes overdriventool needs like 3-5 sec after console closes to apply OC properly, maybe i could delay it somehow in batch file

[darkneorus]

I use overdriveNtool for OC, does anyone know how to create delay between executing a bach file and starting a miner?

For some reason sometimes overdriventool needs like 3-5 sec after console closes to apply OC properly, maybe i could delay it somehow in batch file

@timeout 5

[trucobit]

https://www.dropbox.com/s/r4u7ubdbov6ec6i/Captura%20de%20pantalla%202018-08-04%20a%20las%2014.03.52.png?dl=0

Hello @patrike, this error that is reflected in notifications, it would be nice to indicate the a-l-g-o to know which miner I have to review. If you look, it does not say anything about protocol, and I do not know what I should check.

[trucobit]

Hi all,

Just thought I would show off the web interface I made for Awesome Miner:
http://stats.finnsk3.com/

It uses the Awesome Miner API along with Nvidia-SMI and and API to my enphase solar controller.
I am also using a CLI based overclocking tool I wrote in C to apply my overclocks as I hate msi ab.

That's the public view, as I am authenticated I see stop,start,restart,reboot,set TDP,set overclocks buttons.

The rigs are all on TPLink HS100/HS110 smart power points and the interface monitors the rigs and if they are unreachable for 5minutes it turns the power point off, waits 30 seconds then turns it back on. All the rigs are set in bios to boot on power outage.

I have onpeak/offpeak power costing so during week days for 8 hours a day my power costs twice as much so my TDP limits are automatically heavily restricted during peak power cost.

When any of my 1080ti rigs start mining Ethereum it automatically launches the ethenlargement pill and closes it if they stop mining Eth.

If I launch discord or a game etc. on my main rig my monitoring script stop the rig from mining, set's my 1080tis TDP to 350w and sets my gaming clocks, resumes mining when I exit all games.

Scripts running on my server:


Now you have something to aim for Awesome Miner devs

Something like that would be perfect, I miss the number of changes made by each miner, to see if they are few or many. Everything else perfect.

Something like that I hope some day Patrike will develop it, because we have a great program with a thousand possibilities, but many of them escape us due to lack of information. A panel like that tells you how bad and good it is, it makes you make better decisions, you see if a new strategy is more profitable than another, in short, I see it as the great lack of Awesome Miner, a lot of power without control.

[pongp28]

Hello All,

Any one has receive notification message from CloudServiceBot Telegram ?

I not receive message from telegram, bot still working?

[STSMiner]

Patrike,

Can you update Awesome Miner with the new algo's for NiceHash please, the list can be found via the link below.

https://www.nicehash.com/algorithm

[darkneorus]

Patrike,

Can you update Awesome Miner with the new algo's for NiceHash please, the list can be found via the link below.

https://www.nicehash.com/algorithm

I don't see any new algos there

[STSMiner]

Patrike,

Can you update Awesome Miner with the new algo's for NiceHash please, the list can be found via the link below.

https://www.nicehash.com/algorithm

I don't see any new algos there

Oppps  !!!   My bad, I forgot to change a setting. DOH !!!! 

[Burnie]

CryptoDredge v 0.8.2 fixes a bug where phi2 (LUX) fails - "Type is not convertible to string"
https://github.com/technobyl/CryptoDredge/releases

You can temporarily edit Cryptodredge under managed software;
Download url: https://github.com/technobyl/CryptoDredge/releases/download/v0.8.2/CryptoDredge_0.8.2_cuda_9.1_windows.zip
Folder name: CryptoDredge_0.8.2

[moppidoo]

CryptoDredge v 0.8.2 fixes a bug where phi2 (LUX) fails - "Type is not convertible to string"
https://github.com/technobyl/CryptoDredge/releases

You can temporarily edit Cryptodredge under managed software;
Download url: https://github.com/technobyl/CryptoDredge/releases/download/v0.8.2/CryptoDredge_0.8.2_cuda_9.1_windows.zip
Folder name: CryptoDredge_0.8.2

many thanks!

Interface Offline (Green) since upgrading to 0.8.2

maybe due to this?

Release 0.8.2 - (August 6, 2018)

• Fix Phi2 bug related to smart contracts
• Improve Tribus +30%
• Improve Phi2 +3%

Release 0.8.1 - (August 3, 2018)

• Improve Allium, Lyra2z, and Phi2 for low-end and middle-end graphics cards
• Fix P2Pool bug related to many rejected shares
• Fix TCP and WebSocket connections used for API
  
• Add power consumption monitoring

Edit:
apparently issue with CD itself, hope it gets fixed soon
https://bitcointalk.org/index.php?topic=4807821.msg43560696#msg43560696

[Finnsk3]

Something like that would be perfect, I miss the number of changes made by each miner, to see if they are few or many. Everything else perfect.

Something like that I hope some day Patrike will develop it, because we have a great program with a thousand possibilities, but many of them escape us due to lack of information. A panel like that tells you how bad and good it is, it makes you make better decisions, you see if a new strategy is more profitable than another, in short, I see it as the great lack of Awesome Miner, a lot of power without control.

The main thing I found is AM is lacking the ability to report trends.

The first thing I did when I started working on my stats page was query AwesomeMiner and log everything of interest to a database every minute.
This means I can do easy trend analysis. It also helps when I walk up in the morning and I see a bunch of rigs had gone done and I can see what miners have been causing rigs to hardlock or bsod rather than just having no idea what it has been mining.

I plan to add a timeline of what is being mined during the day, I have the data in my database I just need to write the display code. I also want to overlay stats like when a miner goes down etc.

Another thing I do is scale TDP limits depending on profit. As profits go up I automatically increase the TDP limit as I don't care if it's burning more power if it's making a lot of profit.

[trucobit]

Something like that would be perfect, I miss the number of changes made by each miner, to see if they are few or many. Everything else perfect.

Something like that I hope some day Patrike will develop it, because we have a great program with a thousand possibilities, but many of them escape us due to lack of information. A panel like that tells you how bad and good it is, it makes you make better decisions, you see if a new strategy is more profitable than another, in short, I see it as the great lack of Awesome Miner, a lot of power without control.

The main thing I found is AM is lacking the ability to report trends.

The first thing I did when I started working on my stats page was query AwesomeMiner and log everything of interest to a database every minute.
This means I can do easy trend analysis. It also helps when I walk up in the morning and I see a bunch of rigs had gone done and I can see what miners have been causing rigs to hardlock or bsod rather than just having no idea what it has been mining.

I plan to add a timeline of what is being mined during the day, I have the data in my database I just need to write the display code. I also want to overlay stats like when a miner goes down etc.

Another thing I do is scale TDP limits depending on profit. As profits go up I automatically increase the TDP limit as I don't care if it's burning more power if it's making a lot of profit.

You can not do more than external and put it in a mysql in a domain and a VPS server.

But the same or very similar could be added to AM, an internal database to record the data and then display it in local HTML 127.0.0.1

I just have to congratulate you on your panel, it's fantastic.