[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[patrike]

I have several cards in groups. I can not see how much they have the total power consumption, only the hashrate is visible.
Please add to the Coins tab in the profile hashrate column also the total power. It will be just great. Thank.

Thanks - good point.

[patrike]

Patrike,

I have a Geforce RTX 2080 FE card, I've noticed that the fan speed is not being reported in Awesome Miner in the lower window, any chance for that to be addressed ?

Thanks.

https://1drv.ms/u/s!AoT9lvLcOWd_h10KRd7JHRHQgwFz

P.S  This might be a limitation of the miner programs, maybe the Devs for these can fix that as well.

I don't have a solution for this right now, as Awesome Miner uses a third-party library for getting GPU information. I do however plan to investigate this further to see if it's possible to find a workaround.

[Allo-4ka]

patrike
New and updated ICONS
https://yadi.sk/d/_2ZrfhxI3WoaXx

[patrike]

Awesome Miner version 5.7.5

 GPU mining
  - NOTE: Some mining software will require CUDA 10.0, included with recent versions of the nVidia GPU drivers
  - Updated predefined pools for the profit switcher to make x22i and more pools available
 Features
  - SUQA block explorer for wallet balance
 Rules
  - Device Temperature trigger allows configuration to trigger on an exact device temperature of 0 C.
 Mining software
  - SrbMiner 1.6.9
  - DSTM Zcash CUDA miner 0.6.2
  - T-Rex miner 0.7.2 (CUDA 10.0)
  - CryptoDredge 0.9.4 (CUDA 10.0)
  - WildRig Multi Miner 0.12.5.1 beta
 Corrections
  - Zjazz miner GPU selection corrected
  - Coins per day calculation corrected for the coin XSG

[patrike]

patrike
New and updated ICONS
https://yadi.sk/d/_2ZrfhxI3WoaXx

Thanks! I will include more icons in the next release.

[Ferguson33]

Great SW. Now is not best time for gpu mining.
It is possible to stop the miner if there is no profit. Set minimum profit ? . Electricity is expensive in our country.
Thankyou

[Laugaricio]

Great SW. Now is not best time for gpu mining.
It is possible to stop the miner if there is no profit. Set minimum profit ? . Electricity is expensive in our country.
Thankyou

You can use rule using miner profit trigger.
(For more details: https://support.awesomeminer.com/support/solutions/articles/35000085907-rules-detect-mining-issues-and-automate-tasks )

[Burnie]

Hello,

Run Batch commands before starting miner HELP.  I am trying to run a OverdriveN Tool batch file to set OC and voltage.   The file runs perfectly on the machine if i launch it.  But when i try from Managed Miner Properties>batch Commands>Execute additional commands before starting the mining software.  It appears to open and close the .bat never allowing it to complete and apply the OC Profiles. I must need some type of wait command.
My command
C:\Users\XXXX\Desktop\OverdriveN\RUNONT.bat

Thanks.

@Patrike

Did you forget to specify the full path to your .exe in the bat file?
Windows doesn't magically know where your exe is.
Or you could add this to the top of your .bat file (if your .exe is in the same folder):

cd %~dp0

[Dalba]

Hello,
Is there a way to get coin balance from http://explorer.btcd.io for bitcoin diamond ?
I made some tests without success...

[Ferguson33]

Thanks for the reply...
I try, but it does not work.

Rules -->User defined rules --> Add

Triggers --> Miner Revenue --> Less Then or Equals --> 2,3 Eu --> 60s
Actions --> Execute remote command --> Miner Command --> Shutdown.exe parrametrs /s     NOT WORK
or
Action --> Execute remote command --> Miner Command  --> Stop miner  NOT WORK

Please for help !

[Laugaricio]

Thanks for the reply...
I try, but it does not work.

Rules -->User defined rules --> Add

Triggers --> Miner Revenue --> Less Then or Equals --> 2,3 Eu --> 60s
Actions --> Execute remote command --> Miner Command --> Shutdown.exe parrametrs /s     NOT WORK
or
Action --> Execute remote command --> Miner Command  --> Stop miner  NOT WORK

Please for help !

Use miner profit instead miner revenue.
[Miner profit = Miner revenue - power cost (if configured)]

[Ferguson33]

Thanks for the reply...
I try, but it does not work.

Rules -->User defined rules --> Add

Triggers --> Miner Revenue --> Less Then or Equals --> 2,3 Eu --> 60s
Actions --> Execute remote command --> Miner Command --> Shutdown.exe parrametrs /s     NOT WORK
or
Action --> Execute remote command --> Miner Command  --> Stop miner  NOT WORK

Please for help !

Use miner profit instead miner revenue.
[Miner profit = Miner revenue - power cost (if configured)]

I understand that...
Miner stop/start work but shutdown not work....

[O-Coin]

Hello,

Run Batch commands before starting miner HELP.  I am trying to run a OverdriveN Tool batch file to set OC and voltage.   The file runs perfectly on the machine if i launch it.  But when i try from Managed Miner Properties>batch Commands>Execute additional commands before starting the mining software.  It appears to open and close the .bat never allowing it to complete and apply the OC Profiles. I must need some type of wait command.
My command
C:\Users\XXXX\Desktop\OverdriveN\RUNONT.bat

Thanks.

@Patrike

Did you forget to specify the full path to your .exe in the bat file?
Windows doesn't magically know where your exe is.
Or you could add this to the top of your .bat file (if your .exe is in the same folder):

cd %~dp0

That did it thank you.

[SuperiorCoin]

anyone wants me for his affiliate program?
will buy tomorrow if no one

Hi I saw you were mining our coin? Could you sell them all OK?

[slysir]

On a few of my miners (2 out of 11)  the NVidia drivers version shown in the Summary tab is not showing the most recent installed version.

I have installed NVidia version 416.34 as reported in Device Manager and by MSI Afterburner but the Summary tab shows older versions.

[Allo-4ka]

patrike
After the SIA fork, three coins were added, the site has an API (including the API market place)
I could not get the balance API
https://siamining.com/chains

algo blake2b

[tf2addict]

Any hints or tips on setting up A.M. for SRBMiner auto switching on MoneroOcean pool?  I have SRBMiner auto switching working through the config files and start-algo-switching.bat file of SRBMiner but now I'm trying to figure out the best way to use A.M. to run this.

EDIT:  I got it working by setting the command line in A.M. to the same as what's in the start-algo-switching.bat file and overriding the v8 config and blanking it out.  Works ok but is there a better way?  The biggest drawback here is every time A.M. has a new version of SRBMiner I will have to manually update some of the files on the miner such as the pools list and algos.txt

Please consider how to add better support for SRBMiner's auto switching to A.M.!

[baf28]

Please add the total power consumption for the algorithm to the coins and Online Services tab, just like the common hashrate.
Thank.

[patrike]

Hello,
Is there a way to get coin balance from http://explorer.btcd.io for bitcoin diamond ?
I made some tests without success...

They didn't provide any API documentation, but by looking at the network requests made by the web browser, they use the following that can be entered as Block Explorer URL in Awesome Miner
http://20.184.13.116/v2/addr/[address]

Then it turns out that they report the balance in unites of "1E-7", so if you select the 1E-8 setting in Awesome Miner you will get a balance 10 times too low. I will add a new setting for selecting 1E-7 in the next release.

[patrike]

Thanks for the reply...
I try, but it does not work.

Rules -->User defined rules --> Add

Triggers --> Miner Revenue --> Less Then or Equals --> 2,3 Eu --> 60s
Actions --> Execute remote command --> Miner Command --> Shutdown.exe parrametrs /s     NOT WORK
or
Action --> Execute remote command --> Miner Command  --> Stop miner  NOT WORK

Please for help !

Use miner profit instead miner revenue.
[Miner profit = Miner revenue - power cost (if configured)]

I understand that...
Miner stop/start work but shutdown not work....

Hi,
1) Please verify that the rule is enabled (the checkbox is checked)
2) Could you send me a few screenshots (via mail) of this trigger configuration and the miner list where the revenue/profit is being display?