|
infested999
|
 |
September 29, 2014, 03:36:38 AM |
|
Where are you located? I don't really need any hardware, I'm pretty efficient at building computers as I've been doing it since the early 90's with my first 386. What else do you offer and what's your company name?
I believe he is offering you re-sale of equipment and set-up. Possibly 24/7 maintenance and support. |
|
|
|
|
kingcolex
|
|
September 30, 2014, 03:14:51 AM |
|
Installed the pair of AntMiner S3+s in a case at my office today. Oddly, when I built it at home and turned it on, the power supply showed it was running idle at 78-79watts (network switch not connected), but at the office here after I powered it in (with network switch connected) is showing about 725watts which I thought it wouldn't do until I set it to mine. Anyway, I hoped it wouldn't blow any fuses having a couple computers, printer, etc. plugged into the same socket and luckily it didn't. So all is good so far. Power supply shows it's running at 91% efficiency and in case temp is at 103F.  Now being a newbie, I've got to set up the rest. Downloaded CGMiner 4.6.1 so tomorrow I'll start setting up the rest, but being absolutely new I hope it doesn't take long to get it up and running. Nice case, i keep seeing these s3 in cases, what is that monitoring screen. |
|
|
|
|
|
IITravel01
|
|
September 30, 2014, 03:52:53 AM |
|
It's the display from the Thortech Thunderbolt Plus power supply.
|
|
|
|
|
|
tripppn
|
|
September 30, 2014, 04:17:14 AM |
|
I don't see the point in putting the S3 in a case. Its already in a case, it's not that loud, and heat isn't really an issue.
|
“You can't be a real country unless you have a beer and an airline - it helps if you have some kind of football team, or some nuclear weapons, but in the very least you need a beer.”
― Frank Zappa
|
|
|
unrealistic
Newbie
 Offline
Activity: 54
Merit: 0
|
|
September 30, 2014, 05:57:28 AM |
|
Installed the pair of AntMiner S3+s in a case at my office today. Oddly, when I built it at home and turned it on, the power supply showed it was running idle at 78-79watts (network switch not connected), but at the office here after I powered it in (with network switch connected) is showing about 725watts which I thought it wouldn't do until I set it to mine. Anyway, I hoped it wouldn't blow any fuses having a couple computers, printer, etc. plugged into the same socket and luckily it didn't. So all is good so far. Power supply shows it's running at 91% efficiency and in case temp is at 103F. http://i172.photobucket.com/albums/w35/IITravel/IMG_1397.jpgNow being a newbie, I've got to set up the rest. Downloaded CGMiner 4.6.1 so tomorrow I'll start setting up the rest, but being absolutely new I hope it doesn't take long to get it up and running. Nice case, i keep seeing these s3 in cases, what is that monitoring screen. Nice setup really, are the antminers in good temperature range ? |
|
|
|
|
doktorwhy
Newbie
Offline
Activity: 10
Merit: 0
|
|
October 02, 2014, 02:05:43 PM
Last edit: October 02, 2014, 02:21:30 PM by doktorwhy |
|
DIY CPU 680w power for 10 port usb hub's 8x 5gh Bi-fury's at the moment. Raspberry pi running minepeon BFGminer 3.10.0 the whole lot put together runs well 40 - 42 ghs https://i.imgur.com/tL62Kvf.jpgAny donations will be greatfuly received. -->bitcoin. 1PWfcDuMKFvyKYNyC3Ka9F8We9tV9kg8NM |
|
|
|
|
|
hotwired007
|
|
October 02, 2014, 03:55:52 PM |
|
I bought a miner from these guys in Nov of 2013, a year later this is what they JUST sent me. They are still collecting peoples money at this site http://amtminers.com/ We all have made complaints to the FTC, FBI and any other agency that would listen. They also send me this miner with "NO POWER SUPPLY", it was supposed to be an AMT miner, but what they send me was a "no name" knockoff. Believer it or not, many of us paid them $6,000 for this, and at the time of delivery they were selling them $899. It is a VERY VERY high probability these guys are going away to jail for a VERY VERY long time. The miner also says it hashes at 1.28 Th/s in the mining interface, but the reality is its hashing at 900Gh/s on BTC Guild. You were clearly see these were used and very dirty fans that squeak as well. They are three COMPLETELY different fans. I would go as far to say, these fans are so dirty they must have been used in something other than a computer. The miner was also filthy with black soot all over it (as you can see), It's pretty scary. The green fan you see in this photo, it just BARELY spins, its almost dead. Useless... The green fan is so slow because the "RPM Sense" white wire has been cut and that is why it doesn't work properly.... I guess I really got the naughty list special miner... 3 different brand fans, very dirty and used looking. The green one hardly pushes air because of the wire that was cut. []http://i62.photobucket.com/albums/h92/network650/20141001_205741_zps44bc6a88.jpg[/] White wire cut right in the middle of the run. wires cut and then put heat shrink on them. Beyond a hack job... []http://i62.photobucket.com/albums/h92/network650/20141001_205917_zps2439d41f.jpg[/] mis-matched connectors, showing 3 pin and 4 pin. Different wiring, but were all in the same type of 4 pin socket. Surely not wired correctly. This is a hack job. []http://i62.photobucket.com/albums/h92/network650/20141001_205940_zpsf4070d1c.jpg[/] what the web interface says its hashing at (temps always this high on everyone' miner) also miner ALWAYS says 1.27 or 1.28, no matter what. Also the 256G on each card also doesn't move. It's obviously a fraud. []http://i62.photobucket.com/albums/h92/network650/aaa_zps530d7d45.png[/] the reality of what it hashes at: (often drops to 900Gh/s) []http://i62.photobucket.com/albums/h92/network650/rate_zps1b1b957c.png[/] []http://justalilhype.com/blog/joey/files/2011/02/2011-02-02184955-670x893.jpg[/] Seems like they've run the miner for as long as possible to get their money out of it before shipping - seems to be a common complaint with some of the companies who manufacture mining kit. Looks like a friday afternoon job to me. have you tried fitting 3 reasonably high CFM fans in replacement of those dodgy 3? I wonder if theyre not moving enough air and the miners are being downclocked due to heat - also have you tried blowing through the system with an air compressor to shift any build up of dust? |
This account was hacked & possibly sold during the period of August 1st and October 24th 2017.
Anything done or said in this period wasnt me.
Many thanks to Cyrus for his help restoring access to my account.
|
|
|
|
spiceminer15
|
|
October 02, 2014, 04:08:08 PM |
|
there are some ants behind the fans and a couple lunar launchers  |
|
|
|
|
|
mrpark
|
|
October 02, 2014, 04:35:50 PM |
|
Yes, I will try to replace the fans. The Web interface is totally fake. I think some people will help to show the code is just a sham job! I bought a miner from these guys in Nov of 2013, a year later this is what they JUST sent me. They are still collecting peoples money at this site http://amtminers.com/ We all have made complaints to the FTC, FBI and any other agency that would listen. They also send me this miner with "NO POWER SUPPLY", it was supposed to be an AMT miner, but what they send me was a "no name" knockoff. Believer it or not, many of us paid them $6,000 for this, and at the time of delivery they were selling them $899. It is a VERY VERY high probability these guys are going away to jail for a VERY VERY long time. The miner also says it hashes at 1.28 Th/s in the mining interface, but the reality is its hashing at 900Gh/s on BTC Guild. You were clearly see these were used and very dirty fans that squeak as well. They are three COMPLETELY different fans. I would go as far to say, these fans are so dirty they must have been used in something other than a computer. The miner was also filthy with black soot all over it (as you can see), It's pretty scary. The green fan you see in this photo, it just BARELY spins, its almost dead. Useless... The green fan is so slow because the "RPM Sense" white wire has been cut and that is why it doesn't work properly.... I guess I really got the naughty list special miner... 3 different brand fans, very dirty and used looking. The green one hardly pushes air because of the wire that was cut. []http://i62.photobucket.com/albums/h92/network650/20141001_205741_zps44bc6a88.jpg[/] White wire cut right in the middle of the run. wires cut and then put heat shrink on them. Beyond a hack job... []http://i62.photobucket.com/albums/h92/network650/20141001_205917_zps2439d41f.jpg[/] mis-matched connectors, showing 3 pin and 4 pin. Different wiring, but were all in the same type of 4 pin socket. Surely not wired correctly. This is a hack job. []http://i62.photobucket.com/albums/h92/network650/20141001_205940_zpsf4070d1c.jpg[/] what the web interface says its hashing at (temps always this high on everyone' miner) also miner ALWAYS says 1.27 or 1.28, no matter what. Also the 256G on each card also doesn't move. It's obviously a fraud. []http://i62.photobucket.com/albums/h92/network650/aaa_zps530d7d45.png[/] the reality of what it hashes at: (often drops to 900Gh/s) []http://i62.photobucket.com/albums/h92/network650/rate_zps1b1b957c.png[/] []http://justalilhype.com/blog/joey/files/2011/02/2011-02-02184955-670x893.jpg[/] Seems like they've run the miner for as long as possible to get their money out of it before shipping - seems to be a common complaint with some of the companies who manufacture mining kit. Looks like a friday afternoon job to me. have you tried fitting 3 reasonably high CFM fans in replacement of those dodgy 3? I wonder if theyre not moving enough air and the miners are being downclocked due to heat - also have you tried blowing through the system with an air compressor to shift any build up of dust? |
BTC: 1JDjCGtxtxoZ46XgTqUoXBDxNFKwcsEmik
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1465
Clueless!
|
|
October 03, 2014, 10:39:22 AM |
|
I bought a miner from these guys in Nov of 2013, a year later this is what they JUST sent me. They are still collecting peoples money at this site http://amtminers.com/ We all have made complaints to the FTC, FBI and any other agency that would listen. They also send me this miner with "NO POWER SUPPLY", it was supposed to be an AMT miner, but what they send me was a "no name" knockoff. Believer it or not, many of us paid them $6,000 for this, and at the time of delivery they were selling them $899. It is a VERY VERY high probability these guys are going away to jail for a VERY VERY long time. The miner also says it hashes at 1.28 Th/s in the mining interface, but the reality is its hashing at 900Gh/s on BTC Guild. You were clearly see these were used and very dirty fans that squeak as well. They are three COMPLETELY different fans. I would go as far to say, these fans are so dirty they must have been used in something other than a computer. The miner was also filthy with black soot all over it (as you can see), It's pretty scary. The green fan you see in this photo, it just BARELY spins, its almost dead. Useless... The green fan is so slow because the "RPM Sense" white wire has been cut and that is why it doesn't work properly.... I guess I really got the naughty list special miner... 3 different brand fans, very dirty and used looking. The green one hardly pushes air because of the wire that was cut.  White wire cut right in the middle of the run. wires cut and then put heat shrink on them. Beyond a hack job...  mis-matched connectors, showing 3 pin and 4 pin. Different wiring, but were all in the same type of 4 pin socket. Surely not wired correctly. This is a hack job.  what the web interface says its hashing at (temps always this high on everyone' miner) also miner ALWAYS says 1.27 or 1.28, no matter what. Also the 256G on each card also doesn't move. It's obviously a fraud.  the reality of what it hashes at: (often drops to 900Gh/s)   well hopefully you can replace fans ...clean the beast up some and get what ever hash out of it that you can as your only option at this point sorry about this I almost bought from these guys too....(no $$$ got a KNC NO ROI Titan) so even the folks that sell you equip like KNC pre-order don't work..if I'm lucky I may get 1/3 of my 10k back (they are shipping them saying how well the Titan's work..although on knc forums no one has managed to get them to work....)...NOT counting the electric of 135 usd a month to run the beast....live and learn I'm out of home mining now... in your boat will just run the NO ROI Titan as long as possible....but took a bath too anyway....feel your pain Searing there are some ants behind the fans and a couple lunar launchers er I gather you are not in "the earthquake parts" of the globe lol  Searing |
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:) |
|
|
|
lovenlifelarge
|
|
October 03, 2014, 09:43:59 PM |
|
 2 x Bitmain S1's & 3 x Bitmain S3's.. Pulling about 1.7 to 1.8TH |
|
|
|
|
QuiveringGibbage
|
|
October 04, 2014, 01:59:47 AM |
|
new addition to the photo album SP30 Oct. batch arrived at Mich-Colo this week. SP30 had PSU fault which required power cycle. All i had to do was go to Mich-Colo online chat to request reboot and it was done. Easy. Pic of h/w hosted at Mich-Colo:  Screenshot of Stats:  More of my h/w pics here: http://idontALT.comSee http://imgur.com/a/mRbMZ for over a years worth of btc mining h/w progression, from 9Million diff to 34Billion diff. Cheers, QG |
Bitcoin is at the tippity top of the mountain...but it's really only half way up..  |
|
|
wrb2010
Newbie
Offline
Activity: 24
Merit: 0
|
|
October 04, 2014, 02:20:13 AM |
|
Just curious what's your eletricity bill been like?
|
|
|
|
|
|
QuiveringGibbage
|
|
October 04, 2014, 05:23:24 AM |
|
Just curious what's your eletricity bill been like?
with Mich-Colo it's flat $350USD hosting fee per month per SP30 unit. not lock in contract. with GekkoScience hosting it's $0.095 per kWh. say round $300usd per month for each SP30. Cheers, QG |
Bitcoin is at the tippity top of the mountain...but it's really only half way up.. |
|
|
Zeta0S
Legendary
Offline
Activity: 1890
Merit: 1031
|
|
October 04, 2014, 09:32:07 AM |
|
new addition to the photo album SP30 Oct. batch arrived at Mich-Colo this week. SP30 had PSU fault which required power cycle. All i had to do was go to Mich-Colo online chat to request reboot and it was done. Easy. Pic of h/w hosted at Mich-Colo: Screenshot of Stats: More of my h/w pics here: http://idontALT.comSee http://imgur.com/a/mRbMZ for over a years worth of btc mining h/w progression, from 9Million diff to 34Billion diff. Cheers, QG Thats seems trowing away money |
|
|
|
|
kaykawa
|
|
October 04, 2014, 11:28:13 AM |
|
Not my mining rigs, but very impressive, one of the best mining rigs photo I have seen in google images :  |
|
|
|
Newar
Legendary
Offline
Activity: 1358
Merit: 1001
https://gliph.me/hUF
|
|
October 04, 2014, 03:55:52 PM |
|
Not my mining rigs, but very impressive, one of the best mining rigs photo I have seen in google images :
Sooo Spring 2013 :-) |
|
|
|
fullzero
Legendary
Offline
Activity: 1232
Merit: 1009
|
|
October 04, 2014, 07:51:03 PM |
|
Those are from the original batch; not the black arrow builds from spring 2013. So really its like Spring 2012
|
|
|
|
Cablez
Legendary
Offline
Activity: 1400
Merit: 1000
I owe my soul to the Bitcoin code...
|
|
October 05, 2014, 01:57:50 AM |
|
That was one of the rigs that caused me to start my cable business ...and yes it was spring 2012. |
Tired of substandard power distribution in your ASIC setup??? Chris' Custom Cablez will get you sorted out right! No job too hard so PM me for a quote
Check my products or ask a question here: https://bitcointalk.org/index.php?topic=74397.0
|
|
|
Newar
Legendary
Offline
Activity: 1358
Merit: 1001
https://gliph.me/hUF
|
|
October 05, 2014, 03:39:16 AM |
|
Those are from the original batch; not the black arrow builds from spring 2013. So really its like Spring 2012
Correct. I got my numbers mixed up. It reminds me when I started mining with CM-1s and the guy who helped me with the location sent me that exact pic, because he thought the two settings looked somewhat similar (a lot more hardware in that pic though) |
|
|
|
|
