[ANN] ccminer 2.3 - opensource - GPL (tpruvot)

[Bluecheese]

btw nist5 isn't working, getting invalid argument...

I'm getting this too.  Was there a fix?

[1715628547]

1715628547

[1715628547]

1715628547

[sp_]

What's up with Yiimp today on skein. My rigs are under half speed on the pool, and the problem seem to be for all the workers on the pool

[Epsylon3]

i restarted the stratum, unsure of the reason yet

[sp_]

I get rejects: invalid job id. Restarting the miner helps.

[sp_]

I see that the diff doesn't go above 0.8.

A highend rig that does 3.4GHASH has the same diff as a 1.5GHASH rig. You should increase the difficulty to reduce the load on the server.

[wacko]

What's up with Yiimp today on skein. My rigs are under half speed on the pool, and the problem seem to be for all the workers on the pool

Damn, and I was thinking there's something wrong with my miners. Having exactly the same problem, the rig is hashing at ~ 2.1 GH, but the pool shows the same hashrate only in the beginning, and then it starts going down. The average in the pool stats for ~ 8 hours was 1.2-1.3 GH.

[Epsylon3]

was affecting everyone (same shares percent), some memory leaks due to some socket issues.

Not the first time i see this behavior, one or 2 miner ips were kinda delaying the communication. China miners in general

btw.. what is this miner ? ccminer/enemy-0.2b

[rednoW]

I see that the diff doesn't go above 0.8.

A highend rig that does 3.4GHASH has the same diff as a 1.5GHASH rig. You should increase the difficulty to reduce the load on the server.

you can set manual static diff AFAIK. But nevertheless better to start your own stratum and go solo ))

[rednoW]

A highend rig that does 3.4GHASH has the same diff as a 1.5GHASH rig. You should increase the difficulty to reduce the load on the server.

high end rig, you've made my day)))))))))
High end rig is doing >8ghs ))

[Epsylon3]

and 1200W :p

[ZenFr]

Compiled the last version under Ubuntu : no problem, as every time, good job dev.

But I have a issue with cryptonight algo (XMR) : the hashrate is good, but the computer come very very very slow, even to move te mouse....
Any idea ?

[rednoW]

and 1200W :p

2kW in fact )))

[sp_]

Same problem today, you need to restart the stratum...

[Kompik]

A highend rig that does 3.4GHASH has the same diff as a 1.5GHASH rig. You should increase the difficulty to reduce the load on the server.

high end rig, you've made my day)))))))))
High end rig is doing >8ghs ))

1080tis?

[Vaccinus]

why i get very low hashrate with this last version on jackpot? only 13 mega with intensity 25 on a 1070 instead on 1.8.4 version i get 27MH, is this version not optimized well for jackpotcoin algorithm?

[Epsylon3]

yep, both kernels are there, jackpot and jha. The temporary jha should be dropped later, took me some time to localize the issue

[sp_]

A highend rig that does 3.4GHASH has the same diff as a 1.5GHASH rig. You should increase the difficulty to reduce the load on the server.

high end rig, you've made my day)))))))))
High end rig is doing >8ghs ))

1080tis?

An average rig on yiimp is doing 1,5GHASH. So 3.4 is more than 2x the average rig. (3,4GHASH is based on 6x1070 @560MHASH each)

[sp_]

I see that the diff doesn't go above 0.8.
A highend rig that does 3.4GHASH has the same diff as a 1.5GHASH rig. You should increase the difficulty to reduce the load on the server.

you can set manual static diff AFAIK. But nevertheless better to start your own stratum and go solo ))

The autodiff is bether today, I get fewer rejected shares and the pool seem more stable.

[restless]

Is there a link with current speeds of 10x0 series on different algos ?

[anorganix]

You can have a look at YiiMP - Benchmarks.