CCminer(SP-MOD) Modded GPU kernels.

[sp_]

release 2 is sent:

-2 bugfixes in the hash(hopefully no rejected blocks)
-Added another modded kernal. More hash
-Improved the default launch config for 970/980 cards. (they where way off).

best results without the -x parameter.

Since there is no cpu verification, should be tested before deployed.

[zdminer]

release 2 is sent:

-2 bugfixes in the hash(hopefully no rejected blocks)
-Added another modded kernal. More hash
-Improved the default launch config for 970/980 cards. (they where way off).

best results without the -x parameter.

Since there is no cpu verification, should be tested before deployed.

http://i60.tinypic.com/jg1a1y.png

I still didn't receive spreadminer, I sent you my mail this morning in PM.

[bathrobehero]

I found a block with release 2 and at +160 mhz core I get around 1760 kh/s per 750 Ti. However for some reason both spreadminers exit whenever I find a block so I have a loop. It says "Thread 1 found a solution" then "First nonce : x" and closes. Says exactly the same if a card crashes, but nothing is crashing when a block is found.

[jpouza]

release 2 is sent:

-2 bugfixes in the hash(hopefully no rejected blocks)
-Added another modded kernal. More hash
-Improved the default launch config for 970/980 cards. (they where way off).

best results without the -x parameter.

Since there is no cpu verification, should be tested before deployed.

Nice, testing already, we have similar results now.

[jpouza]

Is Release 2 ok?

[jjjordan]

Average (or what it looks like) on EVGA 970 SC  +100 core
tsiv - 4400
sp1 - 4500
sp2 - 4600

Still testing to see if and when it will find a block.

[jpouza]

Average (or what it looks like) on EVGA 970 SC  +100 core
tsiv - 4400
sp1 - 4500
sp2 - 4600

Still testing to see if and when it will find a block.

sp_ r2 is not working, I've got a lot of boooos...

reverting to tsiv's miner....

[antonio8]

I am getting all rejects also with my 750ti with version 2.

[jjjordan]

Average (or what it looks like) on EVGA 970 SC  +100 core
tsiv - 4400
sp1 - 4500
sp2 - 4600

Still testing to see if and when it will find a block.

sp_ r2 is not working, I've got a lot of boooos...

reverting to tsiv's miner....

Same here

[frazier34567]

Dropped down to one 750 ti card running sp_r2 spreadminer. but it can take up to 40 hours to find a block with one card.

[AliMan]

Are any of you guys running the new miner on Windows 8.1?

[jpouza]

Are any of you guys running the new miner on Windows 8.1?

Yes.

[AliMan]

Are any of you guys running the new miner on Windows 8.1?

Yes.

I get this error when I try to run it:

0xc000007b

Did you ever encounter anything as such?

[bathrobehero]

I got 4 boos overnight and 1 yay yesterday. http://pastebin.com/fCHuLxAm

[sp_]

Sorry guys I got a boo as well. Will merge one kernal at a time, then let it run overnight to see if the block is accepted.

[chrysophylax]

Sorry guys I got a boo as well. Will merge one kernal at a time, then let it run overnight to see if the block is accepted.

im just watching for now sp - not testing for the moment - as linux is the only os i will be running for the miners ...

you always do a great job - so ill be interested to see how it pans out ...

tanx mate ...

#crysx

[scotte]

Compiled 1.5.32 on linux OK after changing the realtime stuff for windows only as descibed a few pages back. Also had to stop cuda complaining about my gcc being > 4.8, just changed the include file to accept a minor rev of 9 instead of 8

works fine on quarkcoin, got 6 coins in few hours this morning - GTX850M at around 4600 khash/s

spreadcoin mining not working:
[2015-01-27 12:42:53] 1 miner thread started, using 'spread' algorithm.
[2015-01-27 12:42:53] JSON inval data
[2015-01-27 12:42:53] 127.0.0.1:41677 spread block 241465
[2015-01-27 12:42:53] json_rpc_call failed, retry after 30 seconds

compiled tsiv's spreadminer 0.1 that seems to be working, so my wallet must be ok?
[2015-01-27 12:40:26] 1 miner threads started, using 'spreadx11' algorithm.
[2015-01-27 12:40:27] GPU #0: GeForce GTX 850M, 1173 khash/s

commandline options for both miners was the same other than "-a spread" for sp_hash's miner

I'm completely new to this, so feel free to tell me to go off and read whatever if thats what I need to do

[chrysophylax]

Compiled 1.5.32 on linux OK after changing the realtime stuff for windows only as descibed a few pages back. Also had to stop cuda complaining about my gcc being > 4.8, just changed the include file to accept a minor rev of 9 instead of 8

works fine on quarkcoin, got 6 coins in few hours this morning - GTX850M at around 4600 khash/s

spreadcoin mining not working:
[2015-01-27 12:42:53] 1 miner thread started, using 'spread' algorithm.
[2015-01-27 12:42:53] JSON inval data
[2015-01-27 12:42:53] 127.0.0.1:41677 spread block 241465
[2015-01-27 12:42:53] json_rpc_call failed, retry after 30 seconds

compiled tsiv's spreadminer 0.1 that seems to be working, so my wallet must be ok?
[2015-01-27 12:40:26] 1 miner threads started, using 'spreadx11' algorithm.
[2015-01-27 12:40:27] GPU #0: GeForce GTX 850M, 1173 khash/s

commandline options for both miners was the same other than "-a spread" for sp_hash's miner

I'm completely new to this, so feel free to tell me to go off and read whatever if thats what I need to do

are you talking about sp's ccminer downlaoded from git v 1.5.32?

if so - that doesnt have the spreadx11 algo implemented ...

#crysx

[scotte]

Compiled 1.5.32 on linux OK after changing the realtime stuff for windows only as descibed a few pages back. Also had to stop cuda complaining about my gcc being > 4.8, just changed the include file to accept a minor rev of 9 instead of 8

works fine on quarkcoin, got 6 coins in few hours this morning - GTX850M at around 4600 khash/s

spreadcoin mining not working:
[2015-01-27 12:42:53] 1 miner thread started, using 'spread' algorithm.
[2015-01-27 12:42:53] JSON inval data
[2015-01-27 12:42:53] 127.0.0.1:41677 spread block 241465
[2015-01-27 12:42:53] json_rpc_call failed, retry after 30 seconds

compiled tsiv's spreadminer 0.1 that seems to be working, so my wallet must be ok?
[2015-01-27 12:40:26] 1 miner threads started, using 'spreadx11' algorithm.
[2015-01-27 12:40:27] GPU #0: GeForce GTX 850M, 1173 khash/s

commandline options for both miners was the same other than "-a spread" for sp_hash's miner

I'm completely new to this, so feel free to tell me to go off and read whatever if thats what I need to do

are you talking about sp's ccminer downlaoded from git v 1.5.32?

if so - that doesnt have the spreadx11 algo implemented ...

#crysx

yes it was from git, that explains it. thanks, just playing with this stuff, not sure I can do anything worthwhile on a laptop anyway

[chrysophylax]

Compiled 1.5.32 on linux OK after changing the realtime stuff for windows only as descibed a few pages back. Also had to stop cuda complaining about my gcc being > 4.8, just changed the include file to accept a minor rev of 9 instead of 8

works fine on quarkcoin, got 6 coins in few hours this morning - GTX850M at around 4600 khash/s

spreadcoin mining not working:
[2015-01-27 12:42:53] 1 miner thread started, using 'spread' algorithm.
[2015-01-27 12:42:53] JSON inval data
[2015-01-27 12:42:53] 127.0.0.1:41677 spread block 241465
[2015-01-27 12:42:53] json_rpc_call failed, retry after 30 seconds

compiled tsiv's spreadminer 0.1 that seems to be working, so my wallet must be ok?
[2015-01-27 12:40:26] 1 miner threads started, using 'spreadx11' algorithm.
[2015-01-27 12:40:27] GPU #0: GeForce GTX 850M, 1173 khash/s

commandline options for both miners was the same other than "-a spread" for sp_hash's miner

I'm completely new to this, so feel free to tell me to go off and read whatever if thats what I need to do

are you talking about sp's ccminer downlaoded from git v 1.5.32?

if so - that doesnt have the spreadx11 algo implemented ...

#crysx

yes it was from git, that explains it. thanks, just playing with this stuff, not sure I can do anything worthwhile on a laptop anyway

the spreadx11 miner is private at the moment - for donors to sp ( .1btc ) ...

only issue is that sp is only releasing the windows version of the miner for now ...

so if you have a windows machine that you want to test with - then donate and get the miner from sp ( as long as sp still is willing to do that of course - contact him and find out ) ...

but quark is still very profitable compared to a lot of other algos if you are hashing with yaamp and other multi-algo site ...

#crysx