CCminer(SP-MOD) Modded GPU kernels.

[antantti]

Yep, just keep on mining, you will find blocks too.

[ivcelmik]

Guys need help on one of my rigs after few minutes after start minerapp appear this screen https://i.imgur.com/0rIGSuz.png?1 and go on and on like this any ideea how to fix this or why appear?

Thx in advance

[antonio8]

Guys need help on one of my rigs after few minutes after start minerapp appear this screen https://i.imgur.com/0rIGSuz.png?1 and go on and on like this any ideea how to fix this or why appear?

Thx in advance

1) Are you using tsiv's or sp_'s (and which version)?
2) What does your bat look like?
3) What cards?
4) What OP system and drivers?

Those are just a few that might help out.

[ivcelmik]

Guys need help on one of my rigs after few minutes after start minerapp appear this screen https://i.imgur.com/0rIGSuz.png?1 and go on and on like this any ideea how to fix this or why appear?

Thx in advance

1) Are you using tsiv's or sp_'s (and which version)?
2) What does your bat look like?
3) What cards?
4) What OP system and drivers?

Those are just a few that might help out.

1)Tsiv version
2)spreadminer -o http://127.0.0.1:41677 -u x -p x
3)6x750Ti
4)Win 7x64 347.25

And after 10 minutes gpu load drop to 0 and power c aprox 6% the other 5 work normal and with other alghoritms work all 6 without any problems

[antonio8]

Guys need help on one of my rigs after few minutes after start minerapp appear this screen https://i.imgur.com/0rIGSuz.png?1 and go on and on like this any ideea how to fix this or why appear?

Thx in advance

1) Are you using tsiv's or sp_'s (and which version)?
2) What does your bat look like?
3) What cards?
4) What OP system and drivers?

Those are just a few that might help out.

1)Tsiv version
2)spreadminer -o http://127.0.0.1:41677 -u x -p x
3)6x750Ti
4)Win 7x64 347.25

And after 10 minutes gpu load drop to 0 and power c aprox 6% the other 5 work normal and with other alghoritms work all 6 without any problems

Don't compare to other algos because they all stress the cards differently.

I am not a pro at this but sounds like one card is kicking the driver. Or could be a riser issue.

Don't know if you have tried to narrow down the problem by running one card at a time (-d 0 then change to -d 1 and so on) to see if they run without getting the big hash. If no issues then run 4 cards at once and then add one card at a time until all 6 are running. I know this is time consuming. I would also run 1 card to see if you get a crazy hash immediately or not. I am betting you will because you are 0 for 37,703 blocks found.

Another idea is to have EVGA (or Precision) running and when you see that big hash start kicking in look to see if it shows 5 or 6 cards active. I had to do this before because I had a card disappearing and finally changed the riser and no issue since.

[bathrobehero]

Guys need help on one of my rigs after few minutes after start minerapp appear this screen https://i.imgur.com/0rIGSuz.png?1 and go on and on like this any ideea how to fix this or why appear?

Thx in advance

To me it only happens when the OC is too high and the driver crashes.

[ivcelmik]

Guys need help on one of my rigs after few minutes after start minerapp appear this screen https://i.imgur.com/0rIGSuz.png?1 and go on and on like this any ideea how to fix this or why appear?

Thx in advance

1) Are you using tsiv's or sp_'s (and which version)?
2) What does your bat look like?
3) What cards?
4) What OP system and drivers?

Those are just a few that might help out.

1)Tsiv version
2)spreadminer -o http://127.0.0.1:41677 -u x -p x
3)6x750Ti
4)Win 7x64 347.25

And after 10 minutes gpu load drop to 0 and power c aprox 6% the other 5 work normal and with other alghoritms work all 6 without any problems

Don't compare to other algos because they all stress the cards differently.

I am not a pro at this but sounds like one card is kicking the driver. Or could be a riser issue.

Don't know if you have tried to narrow down the problem by running one card at a time (-d 0 then change to -d 1 and so on) to see if they run without getting the big hash. If no issues then run 4 cards at once and then add one card at a time until all 6 are running. I know this is time consuming. I would also run 1 card to see if you get a crazy hash immediately or not. I am betting you will because you are 0 for 37,703 blocks found.

Another idea is to have EVGA (or Precision) running and when you see that big hash start kicking in look to see if it shows 5 or 6 cards active. I had to do this before because I had a card disappearing and finally changed the riser and no issue since.

Ok thx Anto i think that a riser is the problem.

[ivcelmik]

Guys need help on one of my rigs after few minutes after start minerapp appear this screen https://i.imgur.com/0rIGSuz.png?1 and go on and on like this any ideea how to fix this or why appear?

Thx in advance

1) Are you using tsiv's or sp_'s (and which version)?
2) What does your bat look like?
3) What cards?
4) What OP system and drivers?

Those are just a few that might help out.

1)Tsiv version
2)spreadminer -o http://127.0.0.1:41677 -u x -p x
3)6x750Ti
4)Win 7x64 347.25

And after 10 minutes gpu load drop to 0 and power c aprox 6% the other 5 work normal and with other alghoritms work all 6 without any problems

Don't compare to other algos because they all stress the cards differently.

I am not a pro at this but sounds like one card is kicking the driver. Or could be a riser issue.

Don't know if you have tried to narrow down the problem by running one card at a time (-d 0 then change to -d 1 and so on) to see if they run without getting the big hash. If no issues then run 4 cards at once and then add one card at a time until all 6 are running. I know this is time consuming. I would also run 1 card to see if you get a crazy hash immediately or not. I am betting you will because you are 0 for 37,703 blocks found.

Another idea is to have EVGA (or Precision) running and when you see that big hash start kicking in look to see if it shows 5 or 6 cards active. I had to do this before because I had a card disappearing and finally changed the riser and no issue since.

Ok thx Anto i think that a riser is the problem.

It's working :d

[Dotcommie]

Guys need help on one of my rigs after few minutes after start minerapp appear this screen https://i.imgur.com/0rIGSuz.png?1 and go on and on like this any ideea how to fix this or why appear?

Thx in advance

To me it only happens when the OC is too high and the driver crashes.

Yup.  That or the intensity is too high.

[Dotcommie]

Waaaiiit for it... 

https://www.youtube.com/watch?v=spZJrsssPA0

[chrysophylax]

Waaaiiit for it... 

https://www.youtube.com/watch?v=spZJrsssPA0

hahaha ... hahaha ... HAHAHA ...

no! really! ... HAHAHA! ...

#crysx

[sp_]

KlausT has added bitcoin mining just for fun. If you want to know how fast the newest cards are, build a version from the latest github.

[Bombadil]

KlausT has added bitcoin mining just for fun. If you want to know how fast the newest cards are, build a version from the latest github.

Or use my compile https://mega.co.nz/#!ZI8UUZzb!jV7smY-l0MxoWvHRLkscj-Q6L9acsfNKnDJncDy-5-8

[jpouza]

KlausT has added bitcoin mining just for fun. If you want to know how fast the newest cards are, build a version from the latest github.

Or use my compile https://mega.co.nz/#!ZI8UUZzb!jV7smY-l0MxoWvHRLkscj-Q6L9acsfNKnDJncDy-5-8

I didn't found SHA-256 algo in the help list...

subir imagenes gratis

How do I solo mine Bitcoin, could you please help me with the command line?

I use the Multibit wallet.

tks

[Bombadil]

KlausT has added bitcoin mining just for fun. If you want to know how fast the newest cards are, build a version from the latest github.

Or use my compile https://mega.co.nz/#!ZI8UUZzb!jV7smY-l0MxoWvHRLkscj-Q6L9acsfNKnDJncDy-5-8

I didn't found SHA-256 algo in the help list...
How do I solo mine Bitcoin, could you please help me with the command line?

I use the Multibit wallet.

tks

Hah, he should add it to --help Anyways, if I see it right, it's -a bitcoin

[jpouza]

KlausT has added bitcoin mining just for fun. If you want to know how fast the newest cards are, build a version from the latest github.

Or use my compile https://mega.co.nz/#!ZI8UUZzb!jV7smY-l0MxoWvHRLkscj-Q6L9acsfNKnDJncDy-5-8

I didn't found SHA-256 algo in the help list...
How do I solo mine Bitcoin, could you please help me with the command line?

I use the Multibit wallet.

tks

Hah, he should add it to --help Anyways, if I see it right, it's -a bitcoin

How do I solo mine Bitcoin?

Tried bitcoin.conf in multibit wallet and it didn't work....
Any ideas or tutorial?

Cheers

[djm34]

KlausT has added bitcoin mining just for fun. If you want to know how fast the newest cards are, build a version from the latest github.

Or use my compile https://mega.co.nz/#!ZI8UUZzb!jV7smY-l0MxoWvHRLkscj-Q6L9acsfNKnDJncDy-5-8

I didn't found SHA-256 algo in the help list...
How do I solo mine Bitcoin, could you please help me with the command line?

I use the Multibit wallet.

tks

Hah, he should add it to --help Anyways, if I see it right, it's -a bitcoin

How do I solo mine Bitcoin?

[sp_]

I have submitted an optimalization i  the fresh algo. Release 33. To lazy to build. Yaamp.com has added fresh. Prices are swinging but fresh is more profigable than quark now.

[scotte]

I have submitted an optimalization i  the fresh algo. Release 33. To lazy to build. Yaamp.com has added fresh. Prices are swinging but fresh is more profigable than quark now.

Thanks, now added to my multi algo script for yaamp

I am finding that quark is not as fast as build 31
build 33:
[2015-02-02 13:55:51] accepted: 19/20 (95.00%), 4810 khash/s yay!!!
[2015-02-02 13:55:53] yaamp.com:4033 quark block 430232
[2015-02-02 13:55:53] GPU #0: GeForce GTX 850M, 4806 kH/s

build 31
[2015-02-02 14:03:58] accepted: 33/34 (97.06%), 4920 khash/s yay!!!
[2015-02-02 14:04:06] yaamp.com:4033 quark block 1686456
[2015-02-02 14:04:06] GPU #0: GeForce GTX 850M, 4920 kH/s


both compiled from git on linux. No intensity is being set as in my limited testing the default is  optimum or very close

I have commented out this line (441) in proper_exit() in ccminer.cpp on my system:
sleep(10);                      //make sure that the gpu threads are stopped when updating the stats.
When yaamp closes my miner to move to a different algo it adds a delay before moving to the next one, I have not seen any detrimental effects, is this a bad thing to do?

[scryptr]

I have submitted an optimalization i  the fresh algo. Release 33. To lazy to build. Yaamp.com has added fresh. Prices are swinging but fresh is more profigable than quark now.

Thanks, now added to my multi algo script for yaamp

I am finding that quark is not as fast as build 31
build 33:
[2015-02-02 13:55:51] accepted: 19/20 (95.00%), 4810 khash/s yay!!!
[2015-02-02 13:55:53] yaamp.com:4033 quark block 430232
[2015-02-02 13:55:53] GPU #0: GeForce GTX 850M, 4806 kH/s

build 31
[2015-02-02 14:03:58] accepted: 33/34 (97.06%), 4920 khash/s yay!!!
[2015-02-02 14:04:06] yaamp.com:4033 quark block 1686456
[2015-02-02 14:04:06] GPU #0: GeForce GTX 850M, 4920 kH/s


both compiled from git on linux. No intensity is being set as in my limited testing the default is  optimum or very close

I have commented out this line (441) in proper_exit() in ccminer.cpp on my system:
sleep(10);                      //make sure that the gpu threads are stopped when updating the stats.
When yaamp closes my miner to move to a different algo it adds a delay before moving to the next one, I have not seen any detrimental effects, is this a bad thing to do?

BUILD v31 SPEED--

Build v31 was the fastest yet.  It is knocking 37.8mh/s on my 6x750ti FTW rig.  Later builds have dropped at least 1mh/s on the rig, or ~200kh/s per card.  My good rig has over 12,000 accepts at 37.8mh/s quark currently.       --scryptr