sp_ (OP)
Legendary
Offline
Activity: 2912
Merit: 1087
Team Black developer
|
|
January 12, 2015, 11:15:33 AM |
|
It wil be a seperate miner that can only mine spreadcoin. I am to lazy to integrate it in the other fork of ccminer.
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2828
Merit: 1091
--- ChainWorks Industries ---
|
|
January 12, 2015, 11:21:58 AM Last edit: January 12, 2015, 11:41:13 AM by chrysophylax |
|
It wil be a seperate miner that can only mine spreadcoin. I am to lazy to integrate it in the other fork of ccminer.
hehehe ... kool ... i appreciate that it maybe a bit of work involved ... would be very nice to have one miner mine the majority of algorithms - if not all ... tanx sp ... #crysx
|
|
|
|
bluejam00
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 12, 2015, 12:24:44 PM |
|
Hi
On my stock Geforce GTX 980 - in PrecisionX I OC's 110% power, +150MHz GPU, Mem +116MHZ, + 6mV - I then get 10MH+ for a few seconds - then it falls over with this error:
[2015-01-12 23:21:03] GPU #0: result for 01f4ebc0 does not validate on CPU! [2015-01-12 23:21:03] GPU #0: GeForce GTX 980, 158879 kH/s Cuda error in func 'quark_blake512_cpu_setBlock_80' at line 482 : the launch tim ed out and was terminated.
Not sure what this means - i was getting temps around 65% and 10MH+ so keen to see why this is occuring? I'm using SP release 29.
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2912
Merit: 1087
Team Black developer
|
|
January 12, 2015, 12:38:29 PM |
|
Seems like you have clocked the card to high. Reduce the gpuclock and increase the memory clock. Did the driver crash as well? then you might need to reboot the machine.
You might also want to experiment with the Intensity parameter. start with -i 18 and then continue to find the best setting for your card
-i 20.5 might work good for your overvolted card.
|
|
|
|
StuffOfInterest
|
|
January 12, 2015, 02:36:43 PM Last edit: January 12, 2015, 03:17:10 PM by StuffOfInterest |
|
sp, just sent you 0.025 BTC ( transaction), which should buy a couple of beers, from Miner Control for the great work on ccminer. Figured since I sent some to djm for the eventual NeoScrypt support it makes sense to send some for the guy who has been adding lots of optimizations in. As a side note, why aren't you using GitHub to distribute your binaries? I've been doing this with Miner Control and it makes it has been far easier than having to work with another file upload site.
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
January 12, 2015, 03:12:31 PM |
|
sp, just sent you 0.025 BTC ( transaction), which should buy a couple of beers, from Miner Control for the great work on ccminer. Figured since I sent some to djm for the eventual NeoScrypt support it makes sense to send some for the guy who has been adding lots of optimizations in. As a side note, why are you using GitHub to distribute your binaries? I've been doing this with Miner Control and it makes it has been far easier than having to work with another file upload site. how do you do it ? (thanks for your contribution by the way...)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
StuffOfInterest
|
|
January 12, 2015, 03:16:33 PM |
|
sp, just sent you 0.025 BTC ( transaction), which should buy a couple of beers, from Miner Control for the great work on ccminer. Figured since I sent some to djm for the eventual NeoScrypt support it makes sense to send some for the guy who has been adding lots of optimizations in. As a side note, why aren't you using GitHub to distribute your binaries? I've been doing this with Miner Control and it makes it has been far easier than having to work with another file upload site. how do you do it ? (thanks for your contribution by the way...) When you "draft a new release" you can attach a binary file as part of the release. It even supports drag and drop from the web interface.
|
|
|
|
jpouza
Legendary
Offline
Activity: 2730
Merit: 1117
|
|
January 12, 2015, 06:50:47 PM |
|
The latest (29) should give a small boost in x11,x13,x14,x15 x14 has been more profitable than quark the last 24 hours. 0.4 BTC for 1GHASH. x11 on nicehash has paid 0.3816 BTC/GH/Day the last 24hours. All my rigs are using profit switching software. Miner control (1.6). Windows only.
The only true profitable coin at the moment is SpreadCoin, it uses SpreadX11 algo and no pools are allowed, only solo mining, I think you know that...is there a way to improve tsiv´s miner to increase Maxwell hash rates in SpreadX11? At the moment I get 5.5MH/s per 980 Oced card and 1.7MH/s per 750Ti Oced. Cheers I am working on a spreadcoin miner. Fork from tsivs work. x11 is profitiable now. The payout is 300% higher today than it was last week. Can't wait for SpreadX11 miner optimized, 10MH/s each 980GTX would be nice! You can expect more donations from me. Cheers
|
|
|
|
bluejam00
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 12, 2015, 09:28:58 PM |
|
Seems like you have clocked the card to high. Reduce the gpuclock and increase the memory clock. Did the driver crash as well? then you might need to reboot the machine.
You might also want to experiment with the Intensity parameter. start with -i 18 and then continue to find the best setting for your card
-i 20.5 might work good for your overvolted card.
Hi - I was watching a gamer guy on youtube - he got the same card upto gpu +250Mhz, +200 Mem Clock, 115% volts and it ran fine. It didn't crash the driver just the ccminer.exe - i've a feeling its a .bat setting - will mess around with them and try the -i setting first. Thanks
|
|
|
|
Tiger_BTC
Member
Offline
Activity: 60
Merit: 10
|
|
January 13, 2015, 01:39:35 AM |
|
Is SpreadX11 kernal included in this miner ??
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2828
Merit: 1091
--- ChainWorks Industries ---
|
|
January 13, 2015, 03:38:03 AM |
|
Is SpreadX11 kernal included in this miner ?? i asked that earlier mate ... sp is optimizing the other miner - so the answer simply is no ... thats ok ... sp does awesome work anyway ... so i cant see the new miner being anything short of the standard of work that he normally does anyway ... which is very high ... #crysx
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2828
Merit: 1091
--- ChainWorks Industries ---
|
|
January 13, 2015, 07:46:11 AM |
|
Is SpreadX11 kernal included in this miner ?? i asked that earlier mate ... sp is optimizing the other miner - so the answer simply is no ... thats ok ... sp does awesome work anyway ... so i cant see the new miner being anything short of the standard of work that he normally does anyway ... which is very high ... #crysx He also said it would be private, IIRC. bugga ... i didnt recall that it was only going to be private ... hmmm ... i guess its all part and parcel of the development of an optimized miner ... tanx wolf ... you have done some pretty awesome stuff yourself ... #crysx
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2912
Merit: 1087
Team Black developer
|
|
January 13, 2015, 08:02:28 AM |
|
Spreadcoin has a turnover on the exchange of around 1BTC/Day. If I flood the market with my 40% faster miner, the coin will crash.
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2828
Merit: 1091
--- ChainWorks Industries ---
|
|
January 13, 2015, 08:31:21 AM |
|
Spreadcoin has a turnover on the exchange of around 1BTC/Day. If I flood the market with my 40% faster miner, the coin will crash.
understood - so what would we have to do to request a nice 'loan' of it for a little while sp? ... do you need any farm testing with it? ... #crysx
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2912
Merit: 1087
Team Black developer
|
|
January 13, 2015, 02:12:02 PM |
|
The next kernal to be sp-modded is groestl-512. I have found a signicant speedup, but it will require some developing time . The current bitslice implementation is suboptimal. I expect quark and the x series to get a major boost.
|
|
|
|
StuffOfInterest
|
|
January 13, 2015, 02:22:14 PM |
|
The next kernal to be sp-modded is groestl-512. I have found a signicant speedup, but it will require some developing time . The current bitslice implementation is suboptimal. I expect quark and the x series to get a major boost.
Considering that Quark has been paying well lately this would be most welcome.
|
|
|
|
Zels
|
|
January 13, 2015, 02:54:51 PM |
|
Anyone have a good OC setting for a 750ti, stable and that don't crash driver please ? For now I have +200 core clock / +100 Memory and it's look to be stable, no crash since 24h and card running at 29 - 30°c Hashing at 5150kh on quark, 3050kh on X11 for now with SP build
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2912
Merit: 1087
Team Black developer
|
|
January 13, 2015, 03:06:00 PM |
|
Anyone have a good OC setting for a 750ti, stable and that don't crash driver please ? For now I have +200 core clock / +100 Memory and it's look to be stable, no crash since 24h and card running at 29 - 30°c Hashing at 5150kh on quark, 3050kh on X11 for now with SP build Wich build is this, you should get a much bether Hashrate with the latest build (29). I get 5,3-5,4 with 0 on the mem and 0 on the core on the 750ti. (quark)
|
|
|
|
Zels
|
|
January 13, 2015, 03:09:40 PM |
|
Wich build is this, you should get a much bether Hashrate with the latest build (29). I get 5,3-5,4 with 0 on the mem and 0 on the core on the 750ti. (quark)
release 28 still, didn't tried 29 yet
|
|
|
|
KL0nLutiy
Member
Offline
Activity: 158
Merit: 10
|
|
January 13, 2015, 03:11:41 PM |
|
Anyone have a good OC setting for a 750ti, stable and that don't crash driver please ? For now I have +200 core clock / +100 Memory and it's look to be stable, no crash since 24h and card running at 29 - 30°c Hashing at 5150kh on quark, 3050kh on X11 for now with SP build I use core +100, mem +300 and it stable on x11, x13, x15 but on quark it not stable and crash the driver but hash rate more than 6400 for 5 minutes I also increase the core voltage for 16 mV
|
|
|
|
|