for 13 hours 2 coins in all
2 coins in 13 hours? It looks that you use target="10" in config.txt.. what GPUs you use? Also you can post your XPM address.
AYsheewiMgDDM7C69Zxf3RRuctFn2xUt8e
6 x gtx1080
conf
# Pool websites:
#
http://xpmforall.org#
http://coinsforall.ioserver = "xpmforall.org";
port = "6666";
# Your XPM payout address
address = "AYsheewiMgDDM7C69Zxf3RRuctFn2xUt8e";
# You can give this machine a custom name
# Computer name is used as default
#name = "custom_name";
# Platform:
# "amd": AMD GCN cards
# "amd legacy": AMD HD5xxx & HD6xxx cards
# "nvidia": NVidia Maxwell cards
platform = "nvidia";
# GPU crash handling (properly untested feature):
# 0 - do nothing
# 1 - close miner application
# 2 - reboot system (need superuser rights)
onCrash = "0";
# - Valid cpuload range: 0 to 4
# - More than 2 does not make sense
# - You can use 0 for really slow CPUs
cpuload = "1";
# Target Cunningham chain length, default = 10
target = "10";
# Sieve size in stripes (1 stripe = 16384 bits), recommended 420 for AMD, 210 for NVidia
# Big sieve size gives more candidates with less prime probability
sieveSize = "420";
# Weave depth (primes number count using by sieve), recommended 40960 for AMD, 65536 for NVidia
# Big weave depth increases prime probability, but sieve generate less candidates
weaveDepth = "65536";
# Sieve layers number, optimal value is target*2, default = 20
width = "20";
# Sieve window size. Recommended values:
# AMD GPUs: 4096
# NVidia GeForce 750Ti: 8188
# Other NVidia Maxwell GPUs: 12284
windowSize = "12284";
# - The following settings have one entry per GPU
# - If you have more than 4 just add more entries or leave it as is to use defaults
# - All entries must be separated by commas and set between double quotes
# 0 = don't use device
# 1 = use device
devices = ["1", "1", "1", "1", "1"];
# Primorial 13 is optimal
sieveprimorial = ["13", "13", "13", "13", "13"];
# sieves per round value, default = 5
sievePerRound = ["5", "5", "5", "5", "5"];
# -1 means don't change
corefreq = ["-1", "-1", "-1", "-1", "-1"];
memfreq = ["-1", "-1", "-1", "-1", "-1"];
powertune = ["-1", "-1", "-1", "-1", "-1"];
fanspeed = ["-1", "-1", "-1", "-1", "-1"];
