Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org

[drozenski]

why am i getting

 * warning: ran out of hashes, increasing sha256 work size coefficient to 65536
 * warning: ran out of hashes, increasing sha256 work size coefficient to 65536
 * warning: ran out of hashes, increasing sha256 work size coefficient to 98304
 * warning: ran out of hashes, increasing sha256 work size coefficient to 131072

Then its starting?

[DataSea]

If you had a Datacoin pool, I'd totally use it.
Your work is much appreciated - been using your miners for years on Datacoin.
The Primecoin - Datacoin alliance could bring everyone to great heights

[eXtremal]

If you had a Datacoin pool, I'd totally use it.
Your work is much appreciated - been using your miners for years on Datacoin.
The Primecoin - Datacoin alliance could bring everyone to great heights

I have hidden DTC pool on coinsforall: http://coinsforall.io/#!/coin/DTC, but it not tested. I have moved I gpu to it for testing purposes

server = "coinsforall.io";
port = "6670";

xpmclient 10.2.1 automatically switch to target="9" during connection.

why am i getting

 * warning: ran out of hashes, increasing sha256 work size coefficient to 65536
 * warning: ran out of hashes, increasing sha256 work size coefficient to 65536
 * warning: ran out of hashes, increasing sha256 work size coefficient to 98304
 * warning: ran out of hashes, increasing sha256 work size coefficient to 131072

Then its starting?

It's ok, miner adjust its parameters at start.

[eXtremal]

<error> kernelxpm_gpu0.cl not found

What have I missed please?

Thank you!

Miner can't write to its own directory? Run chmod -R a+w on it.
Current version is 10.2.2, not 10.2.1

[drozenski]

I have hidden DTC pool on coinsforall: http://coinsforall.io/#!/coin/DTC, but it not tested. I have moved I gpu to it for testing purposes

server = "coinsforall.io";
port = "6670";

Are you working on this? I would mine on this pool if it was fully developed

[ser_ator]

[/quote]
Miner can't write to its own directory? Run chmod -R a+w on it.
Current version is 10.2.2, not 10.2.1
[/quote]

Silly me..

Thank you very much, eXtremal.
[/quote]

hi

old cards like 270(x), 7850 work well only with 10.2.1 version

with 10.2.2 work only without 14.X ocl & gives worst rezult than 10.2.1 (without 14.x ocl driver)

eXtremal

if you have right parameter for those cards,pls share

(all in win 7 64bit) 10.2.1 work well with 15.7.1 driver + 14.X ocl driver , but with 15.12 wont work with 14.x ocl driver

[korjik]

when you create 10.3 miner my friend?

[Olekk]

Some of my cards (RX 470/580) getting crashed after 1-2 min of mining. On 4 rigs with same miner (10.2.2), windows(10) and driver (blockchain) everithing works correctly. Did you have a solution?

[roman_neo]

Hi, eXtremal! I have the following problem. I can not launch your miner on nvidia 1080 good. I have 8 cards. On 4 cards the miner works well, but as I launch 5+ card I have an issue - the processor is loaded 100% and the hashrate starts to drop. There are no such problems on AMD cards. Maybe some settings?

[drozenski]

Hi, eXtremal! I have the following problem. I can not launch your miner on nvidia 1080 good. I have 8 cards. On 4 cards the miner works well, but as I launch 5+ card I have an issue - the processor is loaded 100% and the hashrate starts to drop. There are no such problems on AMD cards. Maybe some settings?

What CPU are you using? Try increasing or decreasing the CPU offload.

Even with a GPU miner this coin is CPU heavy, more cards = higher CPU usage. Also Nvidia pushes more to the CPU then AMD

[eXtremal]

Hi, eXtremal! I have the following problem. I can not launch your miner on nvidia 1080 good. I have 8 cards. On 4 cards the miner works well, but as I launch 5+ card I have an issue - the processor is loaded 100% and the hashrate starts to drop. There are no such problems on AMD cards. Maybe some settings?

Hi,
Unfortunately, you need Linux for use 5+ NVidia GPUs, because NVidia have a problem in their OpenCL implementation and I don't know a workaround now for Windows.. except rewritting miner in CUDA.

Some of my cards (RX 470/580) getting crashed after 1-2 min of mining. On 4 rigs with same miner (10.2.2), windows(10) and driver (blockchain) everithing works correctly. Did you have a solution?

Overclocking? XPM miner can be unstable on GPUs tuned for ETH.

with 10.2.2 work only without 14.X ocl & gives worst rezult than 10.2.1 (without 14.x ocl driver)

10.2.1 can work with 14.X ocl, but 10.2.2 can't, too strange. What error you see ?

when you create 10.3 miner my friend?

In april. Next version brings speedup for NVidia cards (and I'll try fix high cpu load) and reboot on crash correct handling.

[DataSea]

Hi eXtremal,

This is amazing.
Contributing CPD now for Datacoin pool debugging.

Many Thanks!
The DataSea

If you had a Datacoin pool, I'd totally use it.
Your work is much appreciated - been using your miners for years on Datacoin.
The Primecoin - Datacoin alliance could bring everyone to great heights

I have hidden DTC pool on coinsforall: http://coinsforall.io/#!/coin/DTC, but it not tested. I have moved I gpu to it for testing purposes

server = "coinsforall.io";
port = "6670";

[soulmann]

Hi,
Unfortunately, you need Linux for use 5+ NVidia GPUs, because NVidia have a problem in their OpenCL implementation and I don't know a workaround now for Windows.. except rewritting miner in CUDA.

Hi
Is there any guide how to run xpmclient in ubuntu step by step?

[eXtremal]

Contributing CPD now for Datacoin pool debugging.

Thanks!

Is there any guide how to run xpmclient in ubuntu step by step?

Not need any special guide.. install Ubuntu and NVidia drivers, after it you ready run xpmclient.

[Olekk]

Hi, eXtremal! I have the following problem. I can not launch your miner on nvidia 1080 good. I have 8 cards. On 4 cards the miner works well, but as I launch 5+ card I have an issue - the processor is loaded 100% and the hashrate starts to drop. There are no such problems on AMD cards. Maybe some settings?

Hi,
Unfortunately, you need Linux for use 5+ NVidia GPUs, because NVidia have a problem in their OpenCL implementation and I don't know a workaround now for Windows.. except rewritting miner in CUDA.

Some of my cards (RX 470/580) getting crashed after 1-2 min of mining. On 4 rigs with same miner (10.2.2), windows(10) and driver (blockchain) everithing works correctly. Did you have a solution?

Overclocking? XPM miner can be unstable on GPUs tuned for ETH.

with 10.2.2 work only without 14.X ocl & gives worst rezult than 10.2.1 (without 14.x ocl driver)

10.2.1 can work with 14.X ocl, but 10.2.2 can't, too strange. What error you see ?

when you create 10.3 miner my friend?

In april. Next version brings speedup for NVidia cards (and I'll try fix high cpu load) and reboot on crash correct handling.

Stock clocks, stock bios, 17.12.1 or blockchain drivers.

[burnwaygta4]

0.47cpd for RX580
those results are after 30 min of mining

please show your config.txt and frequency of RX580

[kev7112001]

its official we hit 11 finally lol

weird how we got there it just jumped curious if fpga been made somewhere

[burnwaygta4]

Please tell me what is the threshold of the output xpmforall.org and is it possible to make "Request Payout".

[dragan76]

Can't start miner at all.
Error 64bit kernels not supported on a 32bit executable

Win10 64bit, 6x rx570, config as suggested in readme, blockchain drivers

[buny]

Please tell me what is the threshold of the output xpmforall.org and is it possible to make "Request Payout".

4 xpm