sdef2
Member
 Offline
Activity: 60
Merit: 10
|
 |
April 09, 2015, 06:26:38 PM |
|
i have build from source on ubuntu 14.04 , the qt binary gets compiled ok i think, but it segfaults on startup (the gui flashes a short moment, then segfault).
already tried with fresh .bitcredit directory as well - same problem.
any suggestions?
edit: nothing in debug.log either. bitcreditd and cli binary seem to work btw
trying now myself To me, it's working. Compiled from source https://github.com/bitcreditscc/bicreditsnew.  Check the deps from here: http://bitcredit.wikia.com/wiki/How_to_Compile_BitcreditGo to ~/.bitcredit, backup your wallet.dat and peers.dat, delete everything else, start the wallet and wait till it's sync. Return with a working/not working status. Must have been some dependancy problem, compiled on another computer and copied over the binaries to my own pc, works fine now. The wiki was helpful, thanks. |
|
|
|
|
|
dragos_bdi
|
|
April 09, 2015, 06:28:27 PM |
|
So, was not lost time writing the wiki  |
Thank You for your tips!
BCR - 5u7KPyiHKeg6sbdvd9XhT9HHpvh5c2ppTe
BTC - 1ASJQ7SE84sgQketS2kQCTQLV3DJesYnLh
|
|
|
Baudrate
Newbie
Offline
Activity: 30
Merit: 0
|
|
April 09, 2015, 09:43:14 PM |
|
Edit: Ok, succesfully updated to the new client. Does this mean that 0.30.16.4b is not OK to use? |
|
|
|
|
|
tommyj1
|
|
April 09, 2015, 09:50:49 PM |
|
Edit: Ok, succesfully updated to the new client. Does this mean that 0.30.16.4b is not OK to use? yes, im using this one: v0.30.16.4-5e9b877-dirty |
|
|
|
|
dragos_bdi
|
|
April 09, 2015, 09:55:54 PM |
|
Edit: Ok, succesfully updated to the new client. Does this mean that 0.30.16.4b is not OK to use? yes, im using this one: v0.30.16.4-5e9b877-dirty Just stick with the official wallet on the first post. |
Thank You for your tips!
BCR - 5u7KPyiHKeg6sbdvd9XhT9HHpvh5c2ppTe
BTC - 1ASJQ7SE84sgQketS2kQCTQLV3DJesYnLh
|
|
|
|
bitcreditscc (OP)
|
|
April 10, 2015, 12:33:44 PM |
|
bug detected, i'm back
|
|
|
|
thelonecrouton
Legendary
Offline
Activity: 966
Merit: 1000
|
|
April 10, 2015, 07:28:15 PM
Last edit: April 10, 2015, 09:00:56 PM by thelonecrouton |
|
Compiled v0.30.16.5-c1dc563-dirty but all alone, no peers to sync from...  2015-04-10 19:13:42 3 addresses found from DNS seeds
2015-04-10 19:13:42 dnsseed thread exit
2015-04-10 19:13:42 GUI: PaymentServer::LoadRootCAs : Loaded 175 root certificates
2015-04-10 19:13:42 GUI: QObject::connect: No such signal WalletModel::balanceChanged(CAmount,CAmount,CAmount,CAmount,CAmount,CAmount,CAmount) in qt/overviewpage.cpp:268
2015-04-10 19:13:42 GUI: QObject::connect: (receiver name: 'OverviewPage')
2015-04-10 19:13:42 GUI: QObject::connect: No such signal WalletModel::balanceChanged(CAmount,CAmount,CAmount,CAmount,CAmount,CAmount,CAmount) in qt/sendcoinsdialog.cpp:145
2015-04-10 19:13:42 GUI: QObject::connect: (receiver name: 'SendCoinsDialog')
2015-04-10 19:13:43 connect() to 198.52.160.64:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:43 connect() to 198.52.160.60:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:44 connect() to 198.52.160.59:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:45 connect() to 198.52.160.64:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:46 connect() to 198.52.160.64:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:47 connect() to 198.52.160.60:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:48 connect() to 198.52.160.59:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:48 connect() to 198.52.160.59:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:49 connect() to 198.52.160.60:8877 failed after select(): Connection refused (111)...etc
Also shown here is the balance-changed issue I'm having - it won't update without a client restart. |
|
|
|
|
|
|
|
dragos_bdi
|
|
April 10, 2015, 11:31:52 PM |
|
Compiled v0.30.16.5-c1dc563-dirty but all alone, no peers to sync from... 2015-04-10 19:13:42 3 addresses found from DNS seeds
2015-04-10 19:13:42 dnsseed thread exit
2015-04-10 19:13:42 GUI: PaymentServer::LoadRootCAs : Loaded 175 root certificates
2015-04-10 19:13:42 GUI: QObject::connect: No such signal WalletModel::balanceChanged(CAmount,CAmount,CAmount,CAmount,CAmount,CAmount,CAmount) in qt/overviewpage.cpp:268
2015-04-10 19:13:42 GUI: QObject::connect: (receiver name: 'OverviewPage')
2015-04-10 19:13:42 GUI: QObject::connect: No such signal WalletModel::balanceChanged(CAmount,CAmount,CAmount,CAmount,CAmount,CAmount,CAmount) in qt/sendcoinsdialog.cpp:145
2015-04-10 19:13:42 GUI: QObject::connect: (receiver name: 'SendCoinsDialog')
2015-04-10 19:13:43 connect() to 198.52.160.64:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:43 connect() to 198.52.160.60:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:44 connect() to 198.52.160.59:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:45 connect() to 198.52.160.64:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:46 connect() to 198.52.160.64:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:47 connect() to 198.52.160.60:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:48 connect() to 198.52.160.59:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:48 connect() to 198.52.160.59:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:49 connect() to 198.52.160.60:8877 failed after select(): Connection refused (111)...etc
Also shown here is the balance-changed issue I'm having - it won't update without a client restart. 198.52.160.64:8877 198.52.160.60:8877 198.52.160.59:8877 All three are Dev nodes, and all three are down. Use my nodes till they will go up. |
Thank You for your tips!
BCR - 5u7KPyiHKeg6sbdvd9XhT9HHpvh5c2ppTe
BTC - 1ASJQ7SE84sgQketS2kQCTQLV3DJesYnLh
|
|
|
thelonecrouton
Legendary
Offline
Activity: 966
Merit: 1000
|
|
April 10, 2015, 11:45:18 PM |
|
Working Nodes:
addnode "91.230.123.101:9999" add
addnode "91.230.123.101:8877" add
Thanks, that got me to block 85002, 13hrs behind, but I am stuck there. No bitcredit client has ever connected to more than 1 peer for me. Currently getpeerinfo shows only 91.230.123.101:9999. |
|
|
|
|
|
dragos_bdi
|
|
April 10, 2015, 11:47:15 PM |
|
Working Nodes:
addnode "91.230.123.101:9999" add
addnode "91.230.123.101:8877" add
Thanks, that got me to block 85002, 13hrs behind, but I am stuck there. No bitcredit client has ever connected to more than 1 peer for me. Currently getpeerinfo shows only 91.230.123.101:9999. the current block IS 85002. addnode "91.13.108.10:8877" add |
Thank You for your tips!
BCR - 5u7KPyiHKeg6sbdvd9XhT9HHpvh5c2ppTe
BTC - 1ASJQ7SE84sgQketS2kQCTQLV3DJesYnLh
|
|
|
thelonecrouton
Legendary
Offline
Activity: 966
Merit: 1000
|
|
April 11, 2015, 12:09:24 AM |
|
Working Nodes:
addnode "91.230.123.101:9999" add
addnode "91.230.123.101:8877" add
Thanks, that got me to block 85002, 13hrs behind, but I am stuck there. No bitcredit client has ever connected to more than 1 peer for me. Currently getpeerinfo shows only 91.230.123.101:9999. the current block IS 85002. addnode "91.13.108.10:8877" add Hurrah, now have 2 peers!  Still on 85002 though which seems to be taking a godawful time to move. The block explorer in the OP is frozen at 85020 and must be on some other fork, and the qt client thinks I'm 14 hrs behind, so I was a bit confused. Heh, qt has just crashed with: === Bitcredit Client ===
Is (85003) a grant block? : Yes
=== Bitcredit Client ===
Is (85003) a grant block? : Yes
=== Grant Database Block Height -1 ===
=== Bitcredit Client: Making sure that Grant Database is up to date. ===
=== Required Height of Database: 85001, Height requested from: 85003 ===
=== Bitcredit Client ===
De-Serialize Grant Info Database
Max Blocks Wanted: 85001
Could not load Grant Info Database from /home/stu/.bitcredit/blocks/grantdb.dat, Max Wanted: 85001
=== Bitcredit Client ===
Processing the Next Block into the Grant Database for Block: 0
Segmentation fault (core dumped)
|
|
|
|
|
|
dragos_bdi
|
|
April 11, 2015, 12:10:31 AM |
|
Working Nodes:
addnode "91.230.123.101:9999" add
addnode "91.230.123.101:8877" add
Thanks, that got me to block 85002, 13hrs behind, but I am stuck there. No bitcredit client has ever connected to more than 1 peer for me. Currently getpeerinfo shows only 91.230.123.101:9999. the current block IS 85002. addnode "91.13.108.10:8877" add Hurrah, now have 2 peers! Still on 85002 though which seems to be taking a godawful time to move. The block explorer in the OP is frozen at 85020 and must be on some other fork, and the qt client thinks I'm 14 hrs behind, so I was a bit confused. Heh, qt has just crashed with: === Bitcredit Client ===
Is (85003) a grant block? : Yes
=== Bitcredit Client ===
Is (85003) a grant block? : Yes
=== Grant Database Block Height -1 ===
=== Bitcredit Client: Making sure that Grant Database is up to date. ===
=== Required Height of Database: 85001, Height requested from: 85003 ===
=== Bitcredit Client ===
De-Serialize Grant Info Database
Max Blocks Wanted: 85001
Could not load Grant Info Database from /home/stu/.bitcredit/blocks/grantdb.dat, Max Wanted: 85001
=== Bitcredit Client ===
Processing the Next Block into the Grant Database for Block: 0
Segmentation fault (core dumped)
from what git it was compiled ? |
Thank You for your tips!
BCR - 5u7KPyiHKeg6sbdvd9XhT9HHpvh5c2ppTe
BTC - 1ASJQ7SE84sgQketS2kQCTQLV3DJesYnLh
|
|
|
|
|
|
tommyj1
|
|
April 11, 2015, 01:00:49 AM |
|
great work |
|
|
|
thelonecrouton
Legendary
Offline
Activity: 966
Merit: 1000
|
|
April 11, 2015, 01:09:48 AM |
|
Hmm, just made a bittrex withdrawal and it's been showing on their site as completed for 12 blocks but hasn't showed up locally. Usually I get them almost instantly.
|
|
|
|
|
|
dragos_bdi
|
|
April 11, 2015, 01:12:34 AM |
|
Hmm, just made a bittrex withdrawal and it's been showing on their site as completed for 12 blocks but hasn't showed up locally. Usually I get them almost instantly.
bittrex is syncing only with p2pool.website, and that is offline. So till the Dev doesn't power up ... will be no withdraw/deposits working https://bittrex.com/Status |
Thank You for your tips!
BCR - 5u7KPyiHKeg6sbdvd9XhT9HHpvh5c2ppTe
BTC - 1ASJQ7SE84sgQketS2kQCTQLV3DJesYnLh
|
|
|
thelonecrouton
Legendary
Offline
Activity: 966
Merit: 1000
|
|
April 11, 2015, 01:19:37 AM |
|
Hmm, just made a bittrex withdrawal and it's been showing on their site as completed for 12 blocks but hasn't showed up locally. Usually I get them almost instantly.
bittrex is syncing only with p2pool.website, and that is offline. So till the Dev doesn't power up ... will be no withdraw/deposits working https://bittrex.com/StatusBugger. I am trying to start a BN here.  |
|
|
|
|
thelonecrouton
Legendary
Offline
Activity: 966
Merit: 1000
|
|
April 11, 2015, 10:48:11 AM |
|
I have contacted Bittrex and asked them to add a few nodes as provided by dragos_bdi, but I doubt they will pay any attention to me.
A node is just a daemon running on an accessible IP right? I'll see about sticking a few on some DRK masternodes, they are up permanently.
|
|
|
|
|
|
dragos_bdi
|
|
April 11, 2015, 03:45:54 PM |
|
I have contacted Bittrex and asked them to add a few nodes as provided by dragos_bdi, but I doubt they will pay any attention to me.
A node is just a daemon running on an accessible IP right? I'll see about sticking a few on some DRK masternodes, they are up permanently.
Yes |
Thank You for your tips!
BCR - 5u7KPyiHKeg6sbdvd9XhT9HHpvh5c2ppTe
BTC - 1ASJQ7SE84sgQketS2kQCTQLV3DJesYnLh
|
|
|
|
