|
Awesome Miner version 7.0.3
ASIC mining
- Innosilicon A9++ Zmaster supported
- OW Miner OW1 supported
- Antminer Z11 firmware from August 26th supported
User interface
- Selecting a filter via the web interface will automatically expand miner groups
Mining software
- Gminer 1.65
- Miniz Miner 1.5q6
- Phoenix Miner 4.6c
Corrections
- Correction to the user interface of the Bulk Edit dialog
- Corrections to the sub group feature
|
|
|
|
PhoenixMiner 4.6c is out.
Has new kernels for RX 5700.
This updated version will soon be made available. |
|
|
|
PAtrike there is some function or rule to launch the Etherpill in the algos that I need, and that when I change somebody it will be deactivated. Or you recommend that I start it with a task scheduler and always be present in the rig whatever it is that mine.
There could be an option where, for example, I said, in this folder is the etherpill, and then in the windows when configuring the miner and such, an option to mark it to load it before mining. And when you have finished mining, delete it from memory, for example, as you do with the reset of OC between profit changes
I have seen that Etherpill can give some more hash in other al-gos
There are two ways you can launch EthLargementPill 1) In the Profit Profile Properties, you can configure "Execute batch commands" for each individual algorithm, for example for Ethereum. 2) If you want it to be running all the time for all algorithms, you can open the Properties of the miner, Command line section, where you also can define batch commands to execute when starting the miner. Please note that it should be configured to run as Administrator ("Execute batch commands with Administrator privileged"). You can also use "Execute additional commands after stopping the mining software" to stop this process, where you specify the executable without file extension, for example: taskkill /im ETHlargementPill-r2 |
|
|
|
@patrike
Hi boss, can you add in next release option in Information tab to display Efficiency in BTC/Watt
And another suggestion for display coin information on bottom of general window. Maybe you can display information about Network dificulty, hashrate and maybe you can display exchange rate from three biggest exchanges for the coin.
Regards
Thanks - I like those suggestions and they are all noted. I will try to add at least some of them in the very near future. |
|
|
|
Hi
I have been using Awesome miner on my GPU mining rigs which have Windows 10 on all of them. I had no problem to update them to the latest version of the Awesome miner before, but when you released version 7.0, I have not been able to upgrade them. The current version is 6.9.4 and if I click on check for update, it shows me version 7.0.2 is available. When I click on update, the progress bar gets complete and Awesome miner reopens automatically. But it again shows the current version is 6.9.4. l also tried to run the Awesome miner as an admin on all the rigs, but it didn't help. Please help me
Hi, Thanks for your question. Have you tried to reboot the computer? It might be that you have pending Windows updates about to be installed, and this can prevent other installers from running correctly. If the reboot didn't resolve the problem, could you upgrade by manually downloading and running the installer from the web site? Even if you download it manually and run, it will still be an upgrade where all settings are kept. Please let me know if this resolved the upgrade issue. Thanks! I have no antivirus installed or active on the systems. I have rebooted them several times. I have so many saved options, if I export the settings from the options, will they be saved? You can go to the Backup toolbar in the main window where you will find the Backup and Restore buttons - in case you want to create a copy of your settings. For more details, please see: https://support.awesomeminer.com/support/solutions/articles/35000098571-awesome-miner-configuration-filePlease try to uninstall the software (via Control Panel) and then download and install the latest version from the web site. All configuration will be kept by doing these two steps. |
|
|
|
Hi
I have been using Awesome miner on my GPU mining rigs which have Windows 10 on all of them. I had no problem to update them to the latest version of the Awesome miner before, but when you released version 7.0, I have not been able to upgrade them. The current version is 6.9.4 and if I click on check for update, it shows me version 7.0.2 is available. When I click on update, the progress bar gets complete and Awesome miner reopens automatically. But it again shows the current version is 6.9.4. l also tried to run the Awesome miner as an admin on all the rigs, but it didn't help. Please help me
Hi, Thanks for your question. Have you tried to reboot the computer? It might be that you have pending Windows updates about to be installed, and this can prevent other installers from running correctly. If the reboot didn't resolve the problem, could you upgrade by manually downloading and running the installer from the web site? Even if you download it manually and run, it will still be an upgrade where all settings are kept. Please let me know if this resolved the upgrade issue. Thanks! |
|
|
|
Hi Patrik,
we have a problem in the web-interface since the update to the version 7.
if you choose "show offline miners" in the Filter of Miners, all the groups are showing and you have to expand them manualy - in the older versions you just saw the miners wich were offline?!
BR Ralf
Hi Ralf, Thanks for your feedback on this. I will investigate and get back to you on this. There is a general concept where a larger number of miners will result in that all groups will not expand automatically. As that would just make it more difficult to browse when you have a large number of groups and miners. However, when you apply a filter the number of miners can be quite small and then it can still make sense to automatically expand the groups. |
|
|
|
Is it possible to have Awesome miner installed on two systems and sync setting, control the remote rigs?
This is currently not supported, but likely something that will be supported in the future as it would make sense to support. There are however no quick solution to this, so please don't expect it in the near future. See also this discussion: https://bitcointalk.org/index.php?topic=676942.msg52424940#msg52424940Thanks! |
|
|
|
|
Awesome Miner version 7.0.2
ASIC mining
- Added support for monitoring of Avalon 1041 ASIC
Features
- Rule trigger for pool URL detection can be configured to only consider the currently active pool
User interface
- Improved dark mode display, including the Summary tab, GPU Clocking and temperature color display
Mining software
- NBMiner 25.2
|
|
|
|
hi...
is there a chance to only "read only mode" for rigs that are in my network but managed by another awesome miner?
my friends rigs are managed by himself, but i need to be able to monitor the rigs for stability (he doesnt monitor and most time his awesome miner pc is shut down). i tried some time ago with one rig but it feels like it doesnt work properly (no autostart after reboot and/or mining process stopped without giving error messages) - maybe cause my awesome miner was online and his was not?!
Thanks for the suggestion. It currently not supported to have two Awesome Miner main application connecting to and monitor the same Remote Agent. The reason is that Awesome Miner sends configuration to a Remote Agent, and the agent respond with monitoring information per Managed Miner. Even if there was a read-only mode where Awesome Miner didn't send any configuration or commands to a specific Remote Agent, this agent would still report the information per miner. The miners reported by the Remote Agent may not match the miners in your Awesome Miner application (if it was another Awesome Miner that provided the configuration/miners). There are currently no concept where Remote Agent can instruct Awesome Miner to add/remove miners, so there needs to be some redesign in order to support this scenario. i only need something like in the "external miner" section...only API infos about hashrate and temps for example. with the numbers i can create my own rules to get notified if something is wrong. i dont need to view what mining software is active nor what pool etc I understand your point and I also agree it would be nice to have a feature like this. It's however still a bit complicated as a Remote Agent can report information from multiple miners at the same time. If Awesome Miner has a single Managed or External Miner pointing to a Remote Agent, and the remote Agent provides information from two running Managed Miners - one CpuMiner-Opt and one CcMiner - Awesome Miner wouldn't understand what to display if those miners were originally defined on another system. |
|
|
|
coinscalculator is dead?
They should add more data sources.
coinscalculator error 502
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
I'm also getting this error from CoinCalculators.io right now - hopefully it's only a temporary issue. |
|
|
|
hi...
is there a chance to only "read only mode" for rigs that are in my network but managed by another awesome miner?
my friends rigs are managed by himself, but i need to be able to monitor the rigs for stability (he doesnt monitor and most time his awesome miner pc is shut down). i tried some time ago with one rig but it feels like it doesnt work properly (no autostart after reboot and/or mining process stopped without giving error messages) - maybe cause my awesome miner was online and his was not?!
Thanks for the suggestion. It currently not supported to have two Awesome Miner main application connecting to and monitor the same Remote Agent. The reason is that Awesome Miner sends configuration to a Remote Agent, and the agent respond with monitoring information per Managed Miner. Even if there was a read-only mode where Awesome Miner didn't send any configuration or commands to a specific Remote Agent, this agent would still report the information per miner. The miners reported by the Remote Agent may not match the miners in your Awesome Miner application (if it was another Awesome Miner that provided the configuration/miners). There are currently no concept where Remote Agent can instruct Awesome Miner to add/remove miners, so there needs to be some redesign in order to support this scenario. |
|
|
|
Hi, please improve GUI (night mode) in tabs: GPU Clocking, Tags&Notes, Notification
Regards
Thanks for the suggestions - I will make improvements for this in the next release. Anyone know how to display last share difficulty submited by miner? I cant find C# object for this.
Please post a formula. Thanks
Is this for GPU or ASIC miners? For GPU mining software it's generally not possible to get this information. For ASIC miners it might be - but please confirm if this is the case. Thanks! Yes, i need for GPU((( Maybe posible some trick to get share diff. If miner recive new job from pool, in this job must be share diff param, or i am completly wrong? I have not so much XP in GPU mining. Maybe share diff value can be retrived from miner software? Many GPU miner software reporting new diff if this was changed by pool, maybe you can parse log stream and initialize some variable in status object with this data. Then Awesome Miner will be the first software, which implemented last share diff for GPU ))) Regards The mining software knows of the last share difficulty - but it's not reported over the API so Awesome Miner isn't aware of this information. It's not consistently logged either. It's only for ASIC miners and some GPU mining software like sgminer where this information is available via an API - for almost all other GPU mining software it is unfortunately not reported. |
|
|
|
in ver. 7.0.1 you have improved dark mode, but you have forget change font color to white, check GPU Clocking tab (value, default) columns
Easy suggestion
In desktop DARK mode, in mining tabs, green temperatures are barely visible. They could be white and then the colors orange and red for high temperatures, if read well.
one more:
The Options menu should also be DARK with white letters. I'm seeing miners and coins in black, I open options and blinds me at 4 am with my eyes tired. It would be nice to be able to continue with DARK in options, there isn't much complication I think
Thanks for the improvement suggestions. I will make some dark mode adjustments in v7.0.2 that soon will be made available. |
|
|
|
Regarding ASIC fine tune config is it possible to add manual frequency and voltage in addition to predefined profiles? AM firmware has an option to upload config inside the network to other ASICs.
In general it would be much better to have all the options from chain freq. config inside AM....
Thanks for the suggestion, I will look into adding more of the settings. I agree that all relevant settings should be possible to set via Awesome Miner. |
|
|
|
|
Awesome Miner version 7.0.1
Awesome Miner Antminer firmware
- Added setting for Fan check in the Mining Profile configuration
User interface
- Adjusted the green temperature color a bit to increase readability
- Improved dark mode display
Corrections
- Correction to the text output on the Firmware log tab
- Correction to the temperature display for the report saved in the Mining History dialog
- Correction to sorting of sub groups
|
|
|
|
Feature request.
Awesome Miner ASIC firmware
In mining profile, please add option to Fan Check Off
Thank you very much !
This is a good point and I will add a setting for this in the Mining Profile configuration. Thanks! |
|
|
|
Hi, please improve GUI (night mode) in tabs: GPU Clocking, Tags&Notes, Notification
Regards
Thanks for the suggestions - I will make improvements for this in the next release. Anyone know how to display last share difficulty submited by miner? I cant find C# object for this.
Please post a formula. Thanks
Is this for GPU or ASIC miners? For GPU mining software it's generally not possible to get this information. For ASIC miners it might be - but please confirm if this is the case. Thanks! |
|
|
|
Thanks for letting me know Jim. According to an issue report on their site, they also block bitcoin.org, coinmarketcap.com and other crypto related sites with good reputation. I will try to find a solution. Thanks! |
|
|
|
|
Awesome Miner version 7.0
Awesome Miner Antminer firmware
- Added Mining Profile log as a new tab in the bottom area
- Include the Mining Profile log and Kernel log in in the API Report for a miner to make troubleshooting easier
ASIC mining
- Support for GekkoScience Terminus R606 (except for temperature reporting that isn't supported by this ASIC)
- Bulk edit of the Algorithm property of External Miners
- Frequency will display the actual chain frequency instead of the global target frequency
GPU mining
- Select pools used by a Managed Profit Miner and instruct the profit switcher to ignore the pools for a specified period of time. Available via the new profit switching tab for a selected miner
Features
- The miner group concept is improved by allowing sub groups to be added to groups. Use drag and drop or the context menu item 'Move to group' to move a group into another group.
- A new tab for Groups has been added in both the Windows application and the web interface to display a summary of all miner groups with hashrate, power usage, temperature and profit details
- Note about groups: The new web interface supports the concepts of sub groups and group view, but the classic web interface doesn't
- Colors are used to visualize temperatures. Configurable in the Options dialog, General section.
- Notifications for the selected miner is displayed as a tab in the bottom area
- Profit switching history for the selected miner is displayed as a tab in the bottom area for more control of how the profit switcher operates
Integration
- The old Nicehash platform has been removed and is fully replaced by the new Nicehash platform. Nicehash will discontinue the old platform on September 10th 2019.
- Note: Review the wallet settings for Nicehash in the Options dialog, Profit switching section
Configuration
- The predefined rule for detecting high temperature will now allow configuration of the temperature source (Standard or Chip temperature)
- Added a setting to disable drag&drop operations in the list of miners. Configurable in the Options dialog, Advanced section
User interface
- The layout of the Summary tab for the selected miner has been improved
- Improved user interface for selection of miners and groups for rules and for user account configuration
- System tools for Managed Miners miners made available via the toolbar Tools
- Improved context menu user interface for ASIC tools and System tools
- The operation to perform a mining software cleanup is added to the System tools menu in the context menu for a miner
- The web interface includes chip temperature display for a selected miner
Mining software
- BMiner 15.8.6
- Gminer 1.62
- XmRig CPU Miner 3.1.1
- XmRig AMD Miner 2.14.6
- XmRig nVidia Miner 2.14.5
- NBMiner 25.1
- Z-enemy Miner CUDA 10.1 support added
- CcMiner Zcoin Official 1.2.2
Note: You will no longer be able to use the old Nicehash platform once you upgrade to Awesome Miner 7.0. Please also note that the old Nicehash platform will be closed down tomorrow (September 10th).
|
|
|
|
|
Show Posts
