Also you can use the latest version of SRB Miner.
The RX 570 video card gives a very small profit, about 5 cents per day, if you pay 5 cents for electricity. It's very few now.
What is the hash rate for RX 570 and 580 (8GB of course) cards for Dynexcoin mining? it confuses me a bit as the results vary from platform to platform. I would be happy to turn my cards on again. RX570 4GB has around 860 h @ software readed 50 - 60w = 90 - 100w from the wall i think, i make a test tomorrow with PMD. I saw around 900 h for 8GB cards, but i think you can go higher. On average 840-870 H/s depending on the graphics card mining settings. But even if you buy these video cards for $70, the payback period looks very long and you need to service a lot of mining farms. And high power consumption is not possible in a private house, so it is better to use more modern video cards. As i said around 860 for the 4GB cards, the 8GB cards can utitlize more VRAM, so the hashrate is lightly higher than the 4GB variant. What i saw was around 900h in SRBminer Discord. Keep in mind this cards are over 6 years old. A newer RX5700 is not really better - around 940h @ 62w software readed. Sure it is always better to use newer cards, but i have 4 rigs with this gpuīs, so it is nice to start this rigs again and take some small last profits  i would never buy a RX570 these days, no matter what price. But i remember a time some months back, where you said it is senseful to mine on RX570  I mean, the payback period is nearly 3 years for all videocards at the moment, no matter what card.   Not my results, but it is impressive i think. |
|
|
|
Also you can use the latest version of SRB Miner.
The RX 570 video card gives a very small profit, about 5 cents per day, if you pay 5 cents for electricity. It's very few now.
What is the hash rate for RX 570 and 580 (8GB of course) cards for Dynexcoin mining? it confuses me a bit as the results vary from platform to platform. I would be happy to turn my cards on again. RX570 4GB has around 860 h @ software readed 50 - 60w = 90 - 100w from the wall i think, i make a test tomorrow with PMD. I saw around 900 h for 8GB cards, but i think you can go higher. |
|
|
|
Mining on an expensive processor can end very quickly
X670 motherboard and 7950X3D processor
This is a problem with the 3D CPUīs. And at the end, the benefit with high l3 cache is not worse to buy a 3D cpu for mining. |
|
|
|
As far as I know, these cards use the GA102 chip, it's the same as used in 3080 and 3090
My mistake, CMP50HX and below are Turing, the others are Ampere. Update: That said the CMP cards were not built with the top shelf chips and, IIRC, perform less than their RTX counterparts. They were built mostly to provide supply to some large scale miners to relieve the pressure on RTX supplies. With no video ports I would expect to pay less for a CMP than the equivalent RTX. Axxx series cards on the other hand are professional GPUs built for data centre environments. They tend to have higher end chips, single slot with blower for denser installation, better drivers, but louder and need some cooling assist as you would expect to have in a data centre. A series are generally clocked lower for better reliability. Oh, and they're more expensive. Not all professional cards need additional cooling - i had a rig of rtx 4000 and this cards running at 80w and only max 60C with 37mh ethash in the past. But you canīt overclock this cards. The CMP cards was dead on arrival in my opinion. I never saw a real usecase - i mean they cost so much and you get no benefits from this extra cost. |
|
|
|
Since the beginning of 2016 I have been mining. I've seen a lot of problematic AMD Radeon HD 7970 and AMD Radeon HD 7990 cards that overheated a lot, but they were re-mined, not broken. It is also very difficult to burn the power supply if it is of high quality, because it will turn off if it overheats.
But if the fan of the power supply is broken, then the transistors can explode.
It was an AMD GPU but i really cant remember what exactly card it was and yes my power supply was just an standart one. After that misstake i got me i guess it was and 270x Vapor and a high quality poewer supply as this whole thing was a lesson for me. That was the only GPU i killed and since then i dont play much around with overclocking and this things. But its a shame for Nvidia that the GeForce RTX 3080 even cant handle some new game. Video cards do not break from overclocking; even an experienced master cannot repeat such a trick. My power supplies burned, my sockets burned due to bad contacts, but the video cards remained working. Usually server power supplies burned video cards, and on standard PSUs this is possible, but very difficult. Yes i agree, mining does not kill anything, mostly it is an existing hardware failure or user failure. @Topic: It is a normal failure. Such failures can happen in betas or new games or after an update - the games developer canīt test on every different pc configuration and the overall problem is - the fps are not locked in menu, so the FPS beginn to fly to the moon - the card is overheating. This is normal and i donīt unterstand why developers donīt limit the FPS is menus and so on. I would always limit the FPS in menus to the Monitor refresh rate. In CoD MW2 you can set a max FPS for the menu, so the card canīt overheat. |
|
|
|
AMD should make a 2000$ GPU's for the consumer market like NVIDIA.
500-600W is tolerable for the absolute performance at the top tier they would need to have.
Those who can't afford them buy the lower tier 1000$ GPU @ 200-300W instead.
There is absolutely a market for these expensive GPU's no matter what people say that can't afford them.
There are enough people that can afford them to make them viable.
The problem is that 600W is too much, the RTX4090 was designed for 600 W. According to problems with the manufacturer, the cards were produced in a smaller manufacturing process and therefore the RTX4090 only need 450 W. and the AMD RDNA3 cards were not as good as AMD predicted, not bad, but also not at the point they wanted. An AMD 600W monster could beat the RTX4090, but it can also happen that this is not enough and that would be so bad for AMD. |
|
|
|
Absolute impressive for this old boy  how are your oc settings? Did your read the watts from the wall? And is this with POUW on CPU or GPU? I must start playing again with the old boys |
|
|
|
1660 Super was a good card in the past, but i wouldnīt any of this cards today. I would go with 3060 - 3070 and these are my mining pairs at the moment etc+kas+zil -> trm, lol, gminer, rigel depends on the gpus cfx+kas+zil -> gminer kas+zil -> trm, lol, gminer, rigel depends on the gpus ergo+kas+zil -> srbminer flux+zil -> miniZ dynex +(zil but lower hashrate on dynex) on zergpool and let me pay in btc (but some problems at the moment) rxd +(zil or etc or both) -> rigel, bzminer, srbminer ergo+zil on intel arc a750 and srbminer is also quite efficent this is what i am mining at the moment. Plans for the future -> buy more newer cards |
|
|
|
This is very hard to believe, I have my kaspa wallet keys saved in an encrypted Linux OS and til date nothing happened to the wallet, I am more than sure that you did something wrong on your end, I feel skeptic about web wallets too and that's why I don't invest in some coins that have no standalone wallet but I just can't take eye off kaspa, somehow you have been phished, be more careful next time.
I have my keys offline. Encrypted linuxos is nice to have, but the safest place is offline. |
|
|
|
I will contact the law enforcement agencies.
And you think you get your money back? Or what is your intention? I mean we speak about $1200 from you, the law enforcement agencies have more important things to do. I have some coins in kaspa wallet and i also use for this coins the web wallet - all fine for me. Every transaction is in the transaction history - but it is not in a row. Why you have the wallet always open? Is not so save. And why should the kaspa team help you to investigate where you money goes? You think you are the only person on the planet? I mean you made the mistake. And no one from us know how you work on your computer. You should check your pc for running phishing software. Maybe you tried a phishing miner. Who knows
Web wallets are always a risk. Not your keys, not your wallet.
Hmm but he has the key for the wallet - so your sentence makes no sense in this case Web wallet is a normal wallet, like every wallet you have on you pc. |
|
|
|
Hi patrike, I did some more tests. Teamredminer dual mining is not working like it should. Awesomeminer doesnīt add the part for the second coin, i must add the whole commandline by myself. Hashrates is shown correctly. The other thing is a little bit strange, but i will do some further tests. Kaspa+Zil is working as it should on 1 rig - AM show me the kaspa pool and hashrate, but on an other rig AM only show me the zil pool with the kaspa hashrate. Commandline is identical Gminer added Dual and Triple mining Conflux (octupus) + kaspa + zil. |
|
|
|
Yes my last RX570 rig is hashing again Hashrate.no is not accurate. What is the hashrate of RX 570 and the power draw? Depends on the Vram 100 - 200 h at i think around 100w. Software show 60w. I hope you test it and make a new video about it I hope you can buy an elmorlabs tool, for a more accurate wattage measuring. |
|
|
|
So there has been enough time for any serious developer to build a native wallet to support ETHW or ETHF the two hard forks after ETH moved to PoS in September 2022.Why should we stick with Metamask and no one cares of building a native wallet or even better to implement these coins in their already developed wallet like Exodus (which has no intentions of doing so) and Atomic Wallet which would have no real problems implementing these coins.
Is this because they are not listed for trade in Binance yet?May be a Binance listing for trading would give them enough boost as for the big wallets to start implementing them and why it is taking so much time for the team behind these projects to come up with their own wallet for these coins?
Because we need no "native" wallet for ETHW, because metamask and all other work. Metamask is the "native" wallet if you want, metamask is a wallet app and no ETH only wallet, this wallet app can connect to different networks, if they are compatible. ETHW is a ETH fork, so metamask is compatible. I see no point for doing this, if it is really needed, than the Developer of ETHW should do it - but as said - no need for this. Guarda Wallet and Trust Wallet have ETHW support also, Ledger too for example. |
|
|
|
I read the forum thread... It does not inspire confidence when developers are rude to the usual questions of forum users... Support 0  The author of the topic is rigelminer and I did not see rudeness in his posts. You can find a link to this topic in the README.md file. Information from the README.md file Support Discord: https://discord.gg/zKTgcGgc6k I am not the developer of this miner, so when I see banal questions, I sometimes swear  It's not hard to guess by looking at your other forum posts that you are the developer of this program (or are in the development group). So yes, it's very convenient to be rude to everyone under the guise of another account. I have been in mining for more than 6 years. I have never seen such a disregard (on forum branches) anywhere! There's just 0 support. Well, even if you are not a developer (which I don't believe), then the developers clearly don't care about their project, since it allows this on its forum thread. Good luck with this attitude Dude FP91G has nothing to do with miner development and this is not hard to see. Sorry how stupid is your post. FP91G post updates for many miners here, but only to inform us, because most of this miner developers beeing not so active here, they mostly use telegram or discord groups. Sorry you made my day next time chill more dude and donīt attack other person if you have no knowledge. Look at your last posts, you struggle in 2021 with phoenixminer? Sorry dude you are a way to late for the party. Rigel support is on discord if you need as i always wrote. 6 Years of mining experience - in your dreams XD ahahaha , I totally agree with "oklickmanworld" Everyone is just rude here   And by the way, I've also seen this nickname in other unpopular manners. Hmm no one is rude here only you and your friends you claim things that are not true and not FP91G or me. I never understand why people are so stubborn. What other unpopular manners? Interesting This is a forum, we are here to discuss about things, sometimes people don't have the same opinion you know? Hmm i saw the last posts from you and your team members - nothing helpfully. But the only rude guys here are your team. |
|
|
|
Hello! Me and a group of miners are really looking forward to the implementation of the failover pools function! We are a group of miners and our customers, we will add your miner to use among our customers if you implement a feature convenient for our customers! Thanks! We're waiting Nearly all miners have a failover pool function. You want that miners rebuild their miners, because you canīt handle failover pools command XD |
|
|
|
I read the forum thread... It does not inspire confidence when developers are rude to the usual questions of forum users... Support 0 The author of the topic is rigelminer and I did not see rudeness in his posts. You can find a link to this topic in the README.md file. Information from the README.md file Support Discord: https://discord.gg/zKTgcGgc6k I am not the developer of this miner, so when I see banal questions, I sometimes swear It's not hard to guess by looking at your other forum posts that you are the developer of this program (or are in the development group). So yes, it's very convenient to be rude to everyone under the guise of another account. I have been in mining for more than 6 years. I have never seen such a disregard (on forum branches) anywhere! There's just 0 support. Well, even if you are not a developer (which I don't believe), then the developers clearly don't care about their project, since it allows this on its forum thread. Good luck with this attitude Dude FP91G has nothing to do with miner development and this is not hard to see. Sorry how stupid is your post. FP91G post updates for many miners here, but only to inform us, because most of this miner developers beeing not so active here, they mostly use telegram or discord groups. Sorry you made my day next time chill more dude and donīt attack other person if you have no knowledge. Look at your last posts, you struggle in 2021 with phoenixminer? Sorry dude you are a way to late for the party. Rigel support is on discord if you need as i always wrote. 6 Years of mining experience - in your dreams XD |
|
|
|
Yes my last RX570 rig is hashing again Hashrate.no is not accurate. |
|
|
|
|
Like every time yes, but keep in mind bullmarket and cheap gpus - not really. Why waiting for the BTC halving? If you want to mine for long time, buy now.
|
|
|
|
Hi to everybody. I am trying LolMiner with four AMD 580 Sapphire Nitro e one 1660 super
This is the command line I use to mine
lolMiner.exe --algo ETCHASH --pool eu1-etc.ethermine.org:4444 --user .............worker --cclk 1100,1100,1100,-500,1100 --mclk 2140,2140,2090,+1040,2100
I don't know why LolMiner starts mining without considering core clock and memory clock values written in the command line, and so if I launch Afterburner all GPUs are shown with default values for core and memory clock
Why does this happen? Can anybody help me to solve this issue?
Thanks
The instructions say that such settings depend on the version of the driver. As an old miner, I dont like software that changes memory clock on the fly, so I upgrade the bios for the ethash or ethcash algorithm. And I don't use Windows. Try hive os or another system. 1 mining farm is always free. Thanks. Problem is that under Linux I was not able to load driver, so I couldn't use AMD GPUs. About Hive Os, I never was able to configure it, for this reason I run miner under Windows. What do you mean when you say "I upgrade the bios for the ethash or ethcash algorithm"? Thanks again There are a lot of detailed guides on setting up Hive Os on the Internet. memory clock you can change in two ways. The first way is with the help of programs like OverdriveNTool or settings in the miner, but this does not always work correctly. The second way is to modify the BIOS of the video card and set the necessary memory clock in the BIOS of the video card. But then for windows you need to use atikmdag-patcher. Hive OS does not need patches. https://www.youtube.com/watch?v=r0jzvcRTqvQYas, I know how to mod GPU Bios and I did it. Then I prefer to use MSI Afterburner than AMD RAdeon Tool that makes only troubles. As I wrote, I use to set overclock values on commad line, but it seems that LolMiner is not able to consider them and runs GPUs with default values. I should try to use OverdriveNTool, but I don't know it. Is there any guide about it? Can you link to me any HiveOS guide really clear? Not that's on website since I tried several times to follow, but it never works Thanks again I am not sure, but lolminer only can set clocks for nvidia cards. Use Teamredminer for AMD cards, you wonīt find any better miner for AMD. If it not works, try it until it works. If you canīt get HiveOS running, maybe it is better learn more about mining, mining os and so on. |
|
|
|
Nice, i waited for this update This will be a long night of testing |
|
|
|
|
Show Posts
