Hi, I have this weird problem, on a 6 card RIG, 4 of the cards gives me a hashrate of 20mh/s (down from 27mh/s, they are 4gb cards so I think it is that), but the 5th card gives me 30 mh/s, but poolside it is 500kh/s. The 6th card is a vega which gives me 42mh/s. Any ideas why this should be? It does not matter how I swap out the cards, which card is used for display or anything. Also tried the whole eth_epoch 274,274,274,274,273 etc.
Hi! What OS and Drivers are you using? I had the same bug, only a visual bug. Card has not enough Vram for ETH, this card only hash with 0 - 2 mh. I had this problem on 2 of 10 rigs, all with same OS win10 and driver 19.7.4. I don´t why 1 card has not enough vram, display gpu is the integrated gpu and all cards the same for me. I checked gpu z and i see that one gpu use more vram as the other cards.  But i think it is not a miner problem, same is happen with lolminer for example. |
|
|
|
Does anyone know why I am getting ~22mh/s on all my r9 390's 8GB with lolminer? It should be around 29mh/s
Yes, half of my 390 hawaii cards are not loading the DAG file, although they are 8Gb. The other half is hashing with only 22 Mh/s. Strangely, my tahiti cards are hashing as normal with 26-28 Mh. Of course, under linux, more precisely smos. I also use Linux (HiveOS), I hope someone will find a workaround on this asap.  there is no solution. the 390 has a hardware bug. if you mine coins with big dag (like ETH) your hashrate will decrease and it will decrease more and more with every new epoch. mine coins will lower dag size. @Lolliedieb No ETChash kernels for 380 and 380x? I get and error. This is not true. 390's don't have a bug. What a ridiculous claim lol. Windows drivers have a bug that reduces the hash. Also most of the miners haven't updated hawaii kernels for the newer amd drivers and OS with linux kernels. After some testing, I found that nanominer is working, so I am hashing with 30+ MH/s as it has always been for ethereum. Soon phoenixminer will fix the issue for the last epoch, hopefully lolminer also. Some report that gminer is working, but for opencl 18.50 on smos it is not producing accepted shares, although hashing with 30 Mh. May be on hive os with the newer opencl it will work, I just didn't have time to test it. What a ridiculous claim noob. Try claymore benchmark on epoch0 and on epoch 400. Have it the same MH/s? lol XD |
|
|
|
|
Hi Patrike,
New Miniz miner version out 1.6x
|
|
|
|
|
1004
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: miniZ fast Equihash miner 144,5 150,5,3 125,4 192,7 210,9 150,5 BeamHashIII 96,5
|
on: December 08, 2020, 09:23:37 AM
|
@miniZ
The Solution per second in the API is the average speed right?
Can you add Solution Average and Solution per second for the realtime hashrate.
Makes more sense to see the realtime hashrate over API.
Because a RIG goes down or slow down after 50 Day´s, i will recognize the slow down after days, because the average speed will go down very slow.
Hi sxemini, The api speed_sps is a 3h average. If you want you can read speed_is (iteration rate, 3 minutes average) and multiply by 2. You could also add --avg1=period_in_seconds to the miniZ command line. This way you can adjust as you wish. Let us know if this helps. Cheers Thanks --avg1 works. I need this for Awesomeminer. Maybe you can change your usage list on your page? So many commands are missing there. --mode --avg1 and more you explained some times in this thread, but didn´t find it in your usage commandline list. |
|
|
|
Don't stress yourself, you can still mine Ethereum Classic with those cards, ETC team have find a way to support low end graphics card on its modified daggerhashimoto algorithm, it's now called ETChash, it supports from 3gb gpu memory and it's quite profitable
i've been reading that, but most of softwares still don't support old cards. 600 series are not supported. and as you say , any old gfx could work if support is enabled, there are plenty of old cheap cards whit 2-3gb ram, stacking bunch at low electricity billl is a good entry level . Ethminer has cuda 8 support, but what old cards have 3 or 4 gb and only cuda 8? And why so aggressive? I think you are newbie, because those old cards need to much electricity, but maybe you can convince me otherwise. |
|
|
|
Greetings, I hope you can help me solve this problem since the only way I can solve it is by restarting the platform.
could not connect to ethash pool PhoenixMiner -epool eth-eu1.nanopool.org:9999. An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full
the error appears every 20 hours and the only thing I can do is restart
Sorry my bad english
more information is required, which operating system, how much memory is in the system, is the amount of virtual memory increased, how many video cards are running, all the contents of the batch file no more information is required.it is not related with virtual memory or bat file. this error maybe is virus or bug when you run 2 bat files at the same time. ports are not closing after devfee mining then it connects 2nd devfee then 3rd then 4th finally it runs out then you get this error. I can run 2, 3, 4 instances of phönixminer at the same rig. So i think you make a mistake. You say it is the port, but you say you have disabled your firewall, so how it can be the ports? i think it is your virtual memory, but without any information about your system or how much cards and so on. |
|
|
|
|
1007
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: miniZ fast Equihash miner 144,5 150,5,3 125,4 192,7 210,9 150,5 BeamHashIII 96,5
|
on: December 07, 2020, 02:03:55 PM
|
|
@miniZ
The Solution per second in the API is the average speed right?
Can you add Solution Average and Solution per second for the realtime hashrate.
Makes more sense to see the realtime hashrate over API.
Because a RIG goes down or slow down after 50 Day´s, i will recognize the slow down after days, because the average speed will go down very slow.
|
|
|
|
Patrike,
When using "Run mining process with Administrator privileges", srbminer-multi just shows a blank console. It still mines, but there's no visible output.
Patrike,
When using "Run mining process with Administrator privileges", srbminer-multi just shows a blank console. It still mines, but there's no visible output.
Yes this can happen on many different miner in AM, not only srbminer-multi. I've improved this for SrbMiner multi and Miniz miner. @Patrike
Can you take a look in MiniZ miner. AM used the 3h Average hashrate for reading and not the realtime hashrate. Maybe you can change it and add the 3h average as average mining speed, like teamreadminer.
I've looked into the MiniZ API response, but it only includes a single hashrate. "speed_sps" (Solutions Per Second) and Awesome Miner will report this as the current hashrate. The MiniZ web interface do report two hashrates like you point out, but for some reason I can only see one in their API. Strange, because AM show me 16 Sols the whole time and in the miniz window, the hashrate depends from 14 - 17 sols and the average is 16 Sols. Ok i checked the API, Miniz only show the average speed over the API.  Maybe the MiniZ developer can add this, i will ask him. |
|
|
|
Patrike,
When using "Run mining process with Administrator privileges", srbminer-multi just shows a blank console. It still mines, but there's no visible output.
Yes this can happen on many different miner in AM, not only srbminer-multi. @Patrike Can you take a look in MiniZ miner. AM used the 3h Average hashrate for reading and not the realtime hashrate. Maybe you can change it and add the 3h average as average mining speed, like teamreadminer. @joseph32 if you do it right, you don´t need to upload 2 softwares to your rig, you can all do with automatic download and so on.  |
|
|
|
|
A Blackminer F2 Square cost less (479$) and have more fpga chips and more hashrate. Makes more sense in my opinion.
If the seller will only show he is legit, he must go down with the price. No one will buy this shit miner and so no one can say this is legit.
|
|
|
|
|
Nice but the price is a way to high, it will never touch the roi in my opinion.
|
|
|
|
The normal price for RTX3060ti was 400$, that was the announced price from nvidia but now it's almost 800$ and some are even selling over 800$ but if you don't mind buying the OEM variants you can still get the around 400 to 450$ on ebay  I'm always a fan of Nvidia graphics card because they always have better cooling than AMD This is your opinion. But in reality both manufacturer have good and bad cooling. |
|
|
|
Does anyone know why I am getting ~22mh/s on all my r9 390's 8GB with lolminer? It should be around 29mh/s
Yes, half of my 390 hawaii cards are not loading the DAG file, although they are 8Gb. The other half is hashing with only 22 Mh/s. Strangely, my tahiti cards are hashing as normal with 26-28 Mh. Of course, under linux, more precisely smos. I also use Linux (HiveOS), I hope someone will find a workaround on this asap. there is no solution. the 390 has a hardware bug. if you mine coins with big dag (like ETH) your hashrate will decrease and it will decrease more and more with every new epoch. mine coins will lower dag size. @Lolliedieb No ETChash kernels for 380 and 380x? I get and error. |
|
|
|
two rigs stopped working today, sapphire nitro+ 8gb
GPU2: Free VRAM: 7.950 GB; used: 0.050 GB
GPU2: Disabling DAG pre-allocation (not enough VRAM)
GPU2: Allocating DAG for epoch #379 (3.96) GB
GPU2: Allocating buffers failed with: clCreateBuffer (-61).
win7 64bit, blockchain beta drivers
restored original bios, installed 20.4.2., same thing
let us know if you manage to fix it, thanks
how much virtual ram? test another miner like teamred and if it is run, let us know and we look again. add -eres 0 for test change os to win10. Same problem here: 2020.12.02:20:35:03.557: GPU1 Light cache generated in 4.4 s (14.5 MB/s) 2020.12.02:20:35:04.097: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00 2020.12.02:20:35:04.097: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0) 2020.12.02:20:35:04.368: GPU2 GPU2: Free VRAM: 7.948 GB; used: 0.052 GB 2020.12.02:20:35:04.368: GPU2 GPU2: Allocating DAG for epoch #379 (3.96) GB 2020.12.02:20:35:04.368: GPU2 GPU2: Allocating buffers failed with: clCreateBuffer (-61). 2020.12.02:20:35:04.368: wdog Fatal error detected. Restarting. 2020.12.02:20:35:06.099: GPU3 GPU3: Free VRAM: 7.948 GB; used: 0.052 GB 2020.12.02:20:35:06.099: GPU3 GPU3: Allocating DAG for epoch #379 (3.96) GB 2020.12.02:20:35:06.099: GPU3 GPU3: Allocating buffers failed with: clCreateBuffer (-61). RX480 8GB VRAM 30GB TO 50GB But with teamred is running!  You have old driver i think. And without information about your system, no one can help. OS and commandline are important to see some mistakes or something else. |
|
|
|
DID anyone GET A SOLUTION for this: ETH: CONNECTING TO ETHASH POOL EU1.ETHERMINE.ORG:4444 (PROTO: ETHPROXY)
ETH: CONNECTED TO ETHASH POOL EU1.ETHERMINE.ORG:4444 (172.65.207.109)
POOL LOGIN FAILED: INVALID JSON REQUEST
ETH: RECONNECTING IN 5 SECONDS...
LISTENING FOR CDM REMOTE MANAGER AT PORT 3333 IN READ ONLY MODE Any idea how to resolve this? I get it on ethermine / sparkpool / nanopool without your commandline, your os, what cards, and so on, no one can help you. Miner doesn't work on nonencrypted port 4444. Use ssl://eu1.ethermine.org:5555 Yes and without your commandline no one can help you. |
|
|
|
Yes, split your rigs into multiple profiles and set them to the cuda version you want. Thats how I did my mixed rigs. I have no idea how to improve this in a way, without making things to complicated. But maybe Patrik have a solution in his mind  What you mean with different profiles? Every profile consume a license? Yes. But AM is worth every cent  can you explain how you configure a profile? I am understand that you create new rig with some selected GPU, but how you define for this rig a CUDA version? Or i am wroong and you have other way. He do it like i explained. Go to option ->managed software -> and add t-rex miner as user defined software and chooes cuda 10. When you now want to select your mining software on a rig, you have 2 t-rex miner versions. I do so for mixed rig with amd and nvidia cards. |
|
|
|
DID anyone GET A SOLUTION for this: ETH: CONNECTING TO ETHASH POOL EU1.ETHERMINE.ORG:4444 (PROTO: ETHPROXY)
ETH: CONNECTED TO ETHASH POOL EU1.ETHERMINE.ORG:4444 (172.65.207.109)
POOL LOGIN FAILED: INVALID JSON REQUEST
ETH: RECONNECTING IN 5 SECONDS...
LISTENING FOR CDM REMOTE MANAGER AT PORT 3333 IN READ ONLY MODEAny idea how to resolve this? I get it on ethermine / sparkpool / nanopool without your commandline, your os, what cards, and so on, no one can help you. |
|
|
|
two rigs stopped working today, sapphire nitro+ 8gb
GPU2: Free VRAM: 7.950 GB; used: 0.050 GB
GPU2: Disabling DAG pre-allocation (not enough VRAM)
GPU2: Allocating DAG for epoch #379 (3.96) GB
GPU2: Allocating buffers failed with: clCreateBuffer (-61).
win7 64bit, blockchain beta drivers
restored original bios, installed 20.4.2., same thing
let us know if you manage to fix it, thanks
how much virtual ram? test another miner like teamred and if it is run, let us know and we look again. add -eres 0 for test change os to win10. |
|
|
|
registered port on HiveOS  still does not connect is there a solution? you can´t change api port in hiveOS. because you loose all your information in hiveos. The api port for phönixminer is set to 3335 as default. |
|
|
|
Hi Patrike, AM need some improvements.
Please add to "Profit profile" in Overide section a possibility to overide a miner software CUDA version. At the moment is it imposible to set a CUDA version for mining rig explicit, only global for all rigs.
Now i have rigs with NVIDIA 3xxx cards and with NVIDIA 2xxx cards, T-Rex 0.19 better work on 2xxx cards which compiled for CUDA 10, but 3xxx cards work only with software compiled for CUDA 11
Will be much better if you add a possibility to set a CUDA version for each card in the rig. If somebody have a mixed rigs, this will be very helpfull.
Regards
For each rig makes sense, but every card? how would you realize it? a miner can not set cuda per card. You can change the cuda version of a miner software in options. add t-rex as extra miner software with cuda 10 version, so that you have the ability to choose cuda 10 or 11 in miner properties. |
|
|
|
|
Show Posts
