It's still too early for mining farms to shut down their rigs at this time, crypto mining is still a bit profitable, not until the whole profit isn't there anymore many will still keep mining no matter what's happening, is Ethereum made it down to 1000+ profit will be toast.
Many (stupid) n00b miners who were expecting to get rich quick will panic, shut down, then sell their rig. That's what I did in 2018, except I sold 10 rigs for pennies on the dollar to 2 lucky buyers who probably made 500% ROI by now. I remember packing three boxes with 20 GTX the 1060s each, then sending them off for just $140 per card. I don't quite get that, you sold a box containing 20 GTX1060 graphic cards for 140$? What 😦 ?? I could remember that a single 1060 costs 70$ when things got even uglier at that time, I wasn't a miner and I can't afford the card still, God damn! That was a giveaway mehn. yeah i bought 30x P106-100 for 70$ years ago or the P106 with 3GB for 25$ - this cards are good on flux or ergo. good deals I will be happy to get such a deal today but I doubt this will happen any time soon, it will takes months into a bear market phase to get graphic cards at such a price, lick are those who built a whole mining farm with LHR graphic cards, now they have almost double hashrate out of no where. Yes but now all LHR cards have more hashrate - diffi increase, profits go down - so in the end you get same amount of ETH. I wait for the next bear market to update my 200 GPUīs
|
|
|
It's still too early for mining farms to shut down their rigs at this time, crypto mining is still a bit profitable, not until the whole profit isn't there anymore many will still keep mining no matter what's happening, is Ethereum made it down to 1000+ profit will be toast.
Many (stupid) n00b miners who were expecting to get rich quick will panic, shut down, then sell their rig. That's what I did in 2018, except I sold 10 rigs for pennies on the dollar to 2 lucky buyers who probably made 500% ROI by now. I remember packing three boxes with 20 GTX the 1060s each, then sending them off for just $140 per card. I don't quite get that, you sold a box containing 20 GTX1060 graphic cards for 140$? What 😦 ?? I could remember that a single 1060 costs 70$ when things got even uglier at that time, I wasn't a miner and I can't afford the card still, God damn! That was a giveaway mehn. yeah i bought 30x P106-100 for 70$ years ago or the P106 with 3GB for 25$ - this cards are good on flux or ergo. good deals
|
|
|
RTX3090s have no LHR lock 🔑
The problem is this GPU is hard to cool down once the factory thermal pads are not strong anymore, if this is purchased by a newbie there will be problem about high temp later and newbies might not be able to fix them, its hard to cool a RTX 3080 and 3090s, go with 6700XT like FP91G said or RTX A2000.
The biggest problem is it's overpriced. Get the RTX 3080L 12GB or RTX 3060L 12GB instead. That's where you will maximize profit:equipment price. Maximize profit with the RTX 3080 12G? This card can only be unlocked to 60% maybe? So you pay more for less hashrate than the normal 3080?
|
|
|
No, the DAG files are too big for 4GB cards. I would not recommend buying new mining hardware as Ethereum is moving to POS, so I would recommend staking instead.
If Ethereum failed to switch to pos the next cards that will be like rx580 4GB are those with 6GB memory like the 1660s 2060 6GB etc but with lolminer they will have some extra month after 6GB DAG is over, I don't know how lolminer devs manage to pull this stunt, they did a very good job. T-Rex miner and Teamredminer can do the same. It is no stunt.
|
|
|
As good as these new AMD graphic cards are Nvidia graphic cards are still better because they support more algorithms than AMD graphic cards, if truly ETH merge will happen later Nvidia will be a better option, more futuristic IMO.
If you plan to mine ETC or some type of Progpow - i would prefer AMD cards in any case. And Dual Mining TON or ALPH is better on AMD cards, they can handle this better than Nvidia in most cases, and some more dualmining options are on the road. Beamhash is also a good algo for AMD and Cryptonight Heaven also. Over the years i had much more problems with Nvidia and this LHR shit 6650XT you can expect around 35mh @ 70w for ETC/ETH, Kawpow maybe around 18mh. 6750XT climb to maybe around 50 - 52mh @ 100w for ETC/ETH. 6950XT achieve around 65mh in my opinion.
|
|
|
Wait for the 6650xt - up to 35mh @ 70W is possible. 30x and you have around 2100w with around 1,05 Gh
|
|
|
If you have a good price on a prebuilt card. such as this one: https://www.evga.com/products/product.aspx?pn=24G-P5-3978-KRyou could build a new rig. But you have a solid 12 card rig and it burns over 1500 watts the laws of physics say 1500. watts are 3.412 x 1500 = 5118 btu https://learnmetrics.com/convert-watts-to-btu/water cooled rig burning 1500 watts will make same btu, but it will be shifted to the radiators. you will still need to get the heat out the window. you are in Italy if it is south Italy it is hot in the summer you will need fans to move the heat out of the room Yes bringing the heat out of the room is most important. We use only 2 50cm exhaust fans for 14 rigs and this bring down the room temperature by 10°C and some cards go down by 15°C.
|
|
|
I can run my 6600xtīs at 0 - 25% fan - so very low noise and i donīt see the point of using water cooling. the cooler for a gpu is to expensive - for fun ok - but it will extend the payback time very much.
|
|
|
This is your job to get your coin on an exchange. Lol what do you think? You create a coin and make millions? I see no point for mining or buying your shitcoin sorry.
|
|
|
Version 9.3.6 (Development release of 9.4)
ASIC mining - Added support for Ebang Ebit E12 - Added support for Goldshell KD6 - Added support for iPollo V1 Features - Miner activity log and user activity log for logging of all operations performed on each miner. Can be enabled via the Options dialog, Dashboard and History section. - Trigger for checking hashrate can look at secondary hashrate when dual mining Integration - Use new auto region concept for Nicehash pools Mining software - Nanominer 3.6.2 - T-Rex 0.25.12
Hey Patrik, the dual mining feature for lolminer did not work right at the moment. ETC+ALPH for example did not work. I set first ETC for first algo and Blake3 for secondary, than i set the pools - but Awesomeminer not adding the second algo. Only the combination ETC+TON/ALPH not working. ETH+TON/ALPH work well. And dual mining for Teamredminer would be nice. I know it is harder to realize, because they use a second API port for the secondary algo, but i hope you can improve this. At the moment i monitor the second algo via an extra external miner. Question about Teamredminer API - did you change something or did they change something ? I mine ETH+Zil - in the past Awesomeminer recognized the pool change and show me in the Zil PoW time the zil mining speed and the zil pool, but at the moment i see at the zil pow only 0 as hashrate and no pool change. It is nothing big, but in the "old version", i could see in the history how much % i lose per day at zil mining. Example 96% on ethermine and 4% on rustpool.xyz and now i only see 100% on ethermine. I hope you understand my question
|
|
|
Is dual mining possible on the low range graphic cards like gtx 1060, 1070, 1080 and 1660s? I've tried dual mining only on RTX series not GTX, and if Dual mining can be more profitable to the RTX3 series why not the smaller graphics cards?.
This are not really low range bye the way - old cards yes but not low Dual mining on this cards is nearly senseless except the 1660s, they have not enough compute power. Example for dual mining eth+ton on 1070 = 24mh eth and 180mh ton. So not worth - old AMD are better for dual mining RX470/570 can do 32mh ETH and 650mh on TON.
|
|
|
Hello, i just contacted you by mail, before i realised you had a topic here I see that there are some nicehash users and i'm wondering if awesomeminer can be used to monitor temperature, hashrate and alert me (telegram, sms, etc.) when temperature goes above a selected target or hashrate drops below a certain number ? i'm note trying to operate my miner through a tool, i just want to use nicehash miner and getting alerted when temperature and hashrate change. Is it possible with Awesomeminer ? Short yes - look in the options. Here FAQ / Help section https://support.awesomeminer.com/support/solutions/
|
|
|
Wait are you for real? The DAG file isn't even up to 5GB yet, im guessing it should be around 4.7/4.8 DAG file Size, I am glad that lol miner still works for you but for how long? Have you tried every other ETH miners like Trex and NBminer? I tryed all the different miners in HiveOS (TRex, NBMiner, GMiner, ... ) and the only working is lolMiner, I see DAG size is nearly 4.9Gb... It has stopped from yesterday. Happy to continue mining with it :-) It must be possible to mine with T-Rex miner for example. You only mining ETH? Can you give us the log from T-Rex miner or lolminer? And try to unlock the 10GB on your P102. I'm surprised that BIOS modding works for P106-100 and P104-100, this is a better buy for those who likes 1060 6gb graphics card, performance is just the same with gtx1060, they are dirty cheap right now in China around 150$ but it doesn't make sense to build rigs using this card today, the P104-100 is still good though 34MH on ETH.
P106-100 has no modding bios - these card have 6GB and the P106-90 have only 3GB installed physical - so you can only unlock the P104-100 and P102-100. By the way - anyone have 10GB Bios for the P102? Techpowerup delete it.
|
|
|
Is not worth in my opinion. Efficiency ends up nearly the same, you loose warranty for you card, the card runs very hot @100% fan, and it use to much power for the riser on long term, you must pay for this mod - extend your payback time for months.
That's why RedPanda Mining said the thermal pads on A2000 need to be replaced with high grade ones like Artic or Gelid extreme thermal pad after the Mod is done, I've watched a few videos about this on Youtube and they are getting good temperature after the Mod. Good temperature? around 85C on the GDDR6 and over 60C on the GPU is good for you at 100% fan? Not for me sorry. And thats why i said - not worth - to much work, extra costs and not really more efficient, and you loose your warranty for the card. I thought 85°C on GDDR6 is good? Anyways I won't care about the modding too because this card can do 43MH out of the box without modding and the extra 7-10MH for more power consumption looks stupid, where im from once you buy a graphic card its your problem, the warranty covers nothing. 85C is to high!!!!!! We have no summer and GDDR6 work up to 95C so you have only 10 degrees left. And keep in mind you only reach this with 100% fan. In other cases all say - ba why let you run your fans @100%, this will kill the fans fast - or - all over 70% fan will kill the fan fast and so on. And now it is no problem for all to let your cards running at 100% fan. Donīt unterstand the mining community - everyday a new "standard" In my opinion we must unlock the RTX 4000 - this card do out of the box 37mh @ 80 watts - but it is locked for OC. This card run at 50C GPU / 65C VRAM with 75% fan
|
|
|
Looking on whattomine this type of gpu can reach 20.50 Mh/s on ethash with a consumption of 90 watts perhaps with a little overclocking it can even reach 25 Mh/s
It's not worth it unless crypto mining is profitable, if 25MH can give you 4$ per day then using 90watts is still fair to me but with 25MH you will earn 0.88$ today using 90watt, thats crazy and stupid at the same time, I have 1660 gtx that use 55watt to achieve 25MH in miner and 60watt from wall, this is way better than gtx 1060. Lol when 0,88$ at 90watts bad is for you, wait some more months and you will get 0,10$ at 90watts then you would be happy with 0,88$ at 90watts
|
|
|
Is not worth in my opinion. Efficiency ends up nearly the same, you loose warranty for you card, the card runs very hot @100% fan, and it use to much power for the riser on long term, you must pay for this mod - extend your payback time for months.
That's why RedPanda Mining said the thermal pads on A2000 need to be replaced with high grade ones like Artic or Gelid extreme thermal pad after the Mod is done, I've watched a few videos about this on Youtube and they are getting good temperature after the Mod. Good temperature? around 85C on the GDDR6 and over 60C on the GPU is good for you at 100% fan? Not for me sorry. And thats why i said - not worth - to much work, extra costs and not really more efficient, and you loose your warranty for the card.
|
|
|
Wait are you for real? The DAG file isn't even up to 5GB yet, im guessing it should be around 4.7/4.8 DAG file Size, I am glad that lol miner still works for you but for how long? Have you tried every other ETH miners like Trex and NBminer? You read my post above? No read it!
|
|
|
You canīt compare ping time from lolminer with other miners. Normal miners calculate the ms from sending the ping and getting the answer from server back - lolminer calculate only the time from sending and when the server gets your work, so only the half way - this is why you think you have better pings on lolminer. This information is direct from lolliedieb.
|
|
|
Is not worth in my opinion. Efficiency ends up nearly the same, you loose warranty for you card, the card runs very hot @100% fan, and it use to much power for the riser on long term, you must pay for this mod - extend your payback time for months.
|
|
|
|