Latest posts of: BitMaxz

If you are using Bitcoin Electrum wallet then you won't see any balance in your wallet because you sent a BitcoinSV Electrum only support Bitcoin and no other crypto.

I don't think this one will work but try to install an ElectrumSV check this one below then make a wallet there with your Ledger.

- https://github.com/electrumsv/electrumsv

Also, read their documentation here for hardware wallets https://electrumsv.readthedocs.io/en/sv-1.3.13/index.html?highlight=electrumsv

Never heard of them not so popular but there are some people here on the forum who mention this you can check the link below.

- https://bitcointalk.org/index.php?topic=5161520.20

It also mentioned in the Deutsch section here https://bitcointalk.org/index.php?topic=5145391.0

I don't know if they are legit but their account and those who mention it are no longer active here on the forum.

Also, take note that the domain itself soon will expire so better not to use their service.

Code:

Domain:
bitkern.com
Registrar:
World4You Internet Services GmbH
Registered On:
2017-05-23
Expires On:
2024-05-23
Updated On:
2023-07-12

You might be talking about POS coins where you can have a node and then stake coins to get rewarded from fees or a masternode or validator nodes.
It is not the same as Bitcoin having a node won't make money unless someone hires you to have a full node or rents it and uses your node as their private node.
Lightning is another option like they said it's not worth it because the fees on lightning nodes are cheap.

Quote from: VeilVortex on February 24, 2024, 09:27:51 PM

Yes, exactly, but in this case I was actually asking how in the future I could withdraw Bitcoins from Electrum

Withdraw from Electrum?
No there is no option to withdraw Bitcoin on Electrum what you can only do with Electrum is to send and receive BTC.

If you want to send your BTC from your Electrum wallet please read this link below.

- https://bitcoinelectrum.com/how-to-send-bitcoins-using-electrum/

Quote from: AnoyyedOx on February 24, 2024, 05:27:35 PM

I can't get my s3 connected to my router.

Do you mean you can't scan or access the dashboard of the miner?
If I'm right try to factory reset the unit by holding the reset button for 5-10 seconds then release it and then try to scan the IP using angry IP to find the current IP of this unit and use that IP to access the dashboard.

If you are looking for more solutions and setup guides I suggest read this [Guide] Dogie's Comprehensive Bitmain Antminer S3 Setup [HD]

I receive many notifications on Telegram almost all notifications are magic square and they keep promoting their project with newly created accounts.
I think if you can see this thread for now what you can only do is report it.
However, I hope that mods will make some solution to this because almost all notifications that I received are related to this project. Banning magic or SQR is a smart idea but I do not know if mods have tools to ban these keywords maybe the admin can do that.

I can't find any tools that can extract all private keys from the seed phrase generated from Electrum but if you still want to extract you can try the export button suggested by SamReomo but you can only get 30 private keys if you want to increase this then change the gap limit to the number of keys you want.
You can change the gap limit by using this command below

Code:

wallet.change_gap_limit(300)

300 is the keys generated on Electrum as a sample you can replace it with how many private keys you want to export.

When buying from any online store sample Bitrefil when you are at the checkout it will generate a unique QR code or BTC address including the price or amount that you should send copy that and paste to the wallet you currently use.

Since you are using Ledger make an Electrum watch-only wallet with your ledger and there you should be able to paste the BTC address and sign it with your Ledger hardware wallet.

Or for desktop live or mobile you can follow this guide https://support.ledger.com/hc/en-us/articles/4404382228753-Send-crypto-assets?docs=true

I think the Viabtc pool is the best option where to mine Doge and LTC unless the LTE you said above is a different coin?
ViaBTC also has merge mining meaning while you are mining LTC you can also get rewarded with Dogecoin which is available in the PPLNS method.

If you want to know more about merge mining check this link below

- https://support.viabtc.com/hc/en-us/articles/7207416775951-What-is-Merged-Mining

Spread of a coin or range I think TradingView has an indicator or community script for spread I don't know that is exactly what you looking for but check TradingView.

Or check this link below.

- https://www.tradingview.com/scripts/spreads/

Quote from: HopelesDaD on February 23, 2024, 09:03:50 PM

The wallets reflecting are are from CoinEx, Key Ring Pro and Token Pocket And Bitget Wallet.

Coinex and Bitget are exchanges and not a wallet and never heard of Keyring Pro it seems it's a hardware wallet and token pocket it has a wallet app. I never had any experience using these two wallets.

Have you tried to contact these two exchanges directly to their support?

How did you do to restore these wallets?

It seems all your coins are gone(stolen) if you can't see funds under your accounts.

Quote from: HopelesDaD on February 23, 2024, 07:50:25 PM

Okay thank you so much, and I'm not crazy right cause it's been happening for like two weeks now where my wallet displays a balance but then disappears. From my understanding if there's nothing there no balance would display right? I ask to gain a bit of reassurance even though I believe I'm correct in saying such.

Why not tell us what wallet you use?

If it's a Mycelium wallet it is a common issue it always has a syncing issue since before until now didn't been solved the only solution for this is to import the wallet to Electrum wallet if you have a seed backup and then transfer it right away to a new wallet(To Electrum) for safety purposes.

I just a research a bit and I don't think this command would but you can try it and update here if it works or not.

First Command

Code:

bitcoin-cli scantxoutset start '["addr(<address>)", "addr(<address2>)"]'

Source: https://bitcoin.stackexchange.com/questions/89759/fetch-utxo-bitcoin-to-address-created-by-rpc-importprivkey-without-rescan-like-o

Replace address and address2 to with the addresses you want.

If it does not work and if the command you provided above does work and you want multiple addresses then try this one

Code:

scantxoutset "start" "[\"addr(bc1qsshluxkwzf3ksnm5gh8wpzt453x75f2gn6dlqw)\", \"addr(Address2)\", \"addr(Address3)\"]"

Update here if it works or not.

Quote from: fikicod on February 23, 2024, 03:24:19 PM

Thanks for the exchange, everything was done quickly. The money came to the account immediately. Excellent service, I recommend the exchanger!

Newbie trying to give a positive review without any proof? Or are you alt account of the OP trying to fool other people into using your service?

If you want to be trusted I suggest start a sig campaign here where the payments should be escrowed by trusted members here in the forum.
And hire trusted people to review your service that will help people to trust your service.

What network?
You can connect your Antminer to any pools you want listed from this link below.

- https://miningpoolstats.stream/bitcoin

If you mean that your network is your own full node then you would need to host a pool to mine solo in your own node.

Check the guide here https://github.com/rsksmart/ckpool/blob/master/README_original.md

For no hustle solo pool check this https://solo.ckpool.org/

Quote from: The Cryptovator on February 22, 2024, 09:21:01 PM

I don't know why, but I can't browse Alamy's site. Even I tried on Tor to check if I had an IP issue. So I can't check live what exactly is going on and how. But I don't believe private keys are compromised anyway because they aren't stored online. The site may generate an image based on your search. Or the search engine will show you that it partially matches your search. This isn't enough to explain why all the private keys are compromised; otherwise, funds would be stolen. But we haven't heard of any cases where someone stole funds from the wallet by getting private keys from Alamy sites or by random check.

Is it actually just a bluff or FUD if you search it using the private key he posted above it does show only 3 sites in my case including this thread since the method requires you to go to images you can see under images you can find Alamy accessing it with or without VPN it does not work in my case.
What I see here he might be just want to get impressions on his images since you can sell images on that site and maybe he is trying to bring people there to get impressions and get buyers.

I'm using Android but I haven't experienced some malware and spyware yet with my phone I always keep updating the security update on Samsung to make sure I have the most up-to-date data from the server and have Kaspersky antivirus.

If you are randomly downloading some apps on your phone you can be also one to fall to this trojan malware.
So people should be careful in installing any apps if they use their phone with some banking apps or crypto wallets only use them for that purpose if you are going to install other apps not related to financial(Bank or crypto) use other phones to avoid such malware.

Quote from: Beny44 on February 21, 2024, 04:15:21 PM

But what bothers me is that sometimes it ends up with an error, see code. I don't know what it can do. And it's randomly on all boards. The temperature is good, but today I heard that every chip is not reporting the temperature. That there are only three sensors. Then I wouldn't know how the plate is somewhere in the middle.

What do you mean it's randomly on all boards? Do you mean in all hashboards the error comes up?

Did you already did some basic things to do first before you decided to replace the hashboard?

I suggest flash the unit first with the latest firmware and maybe it is just a software bug. If it does not work try to flash the unit through the SD card.

If it still does not work try to run the unit with only one hashboard and check them one by one if they are working fine there might be an issue with the power supply maybe it can't give enough power to run all hashboards.
However, if the one hashboard is not working as your said then focus on that hashboard if you don't have technical knowledge to repair then you don't have any other choice but to buy a replacement.

You can try contacting Zeusbtc sales on their Whatsapp # +8618623251355 or sales staff email faye@zeusbtc.com they might have a spare hashboard for this unit.

Quote from: FP91G on February 22, 2024, 04:07:34 PM

And what will happen to these ASICs next?
Will they be sold to other countries or disposed of?

I don't think they are going to dispose of these units I think they are going to sell them if they are no longer making any profit. It's too expensive to sustain a mining farm if you don't have a source to pay bills and maintenance except for those who have free power source.

I saw lots of sold units on Offordscott Telegram group, so I think some of these companies sold their units to Offordscott or used Offordscott as a broker or middleman to resell these units.

Never heard of any Web3 website that uses metamask with your ETH address(Privkey) to generate a Bitcoin address.
Are you sure that it is a Bitcoin address? Do you know the 3 first character of your Bitcoin address? Legacy/Bech32 address?

Why not export the private key of this Ethereum address from your Metamask wallet and import the private key to any Bitcoin wallet like Electrum?

Or you might be talking about Zion here's their website btc.justsnap.io