Based on the logs during flashing it said burn success. Have you used any commands during flashing through the TTL method? There is another method to flash the unit through TTL but I do not know if the commands will work on the s19j pro. Can you try this method Recovery Method of Serial Port Bitmain also have the same guide but the problem is they didn't include the command lines? That is I think the last step you haven't tried yet(sending command during flashing).
|
|
|
You might have upgraded it to the wrong firmware? How did you know it was bricked? Have you tried to access through the browser? Have you also tried to factory reset the unit by holding the IP report button for 5 seconds? If you already did that but can't still able to access the miner then you can try SD card flashing You can follow the steps below it requires a Card reader with an OTG plug( if you do not have an OTG card reader you can use the "Micro USB port to USB female connector") and then SD card and PC. - First, download the s19j-Pro-a113d-amlctrl-flashCard-20211119.zip- Extract the file to the desktop - Copy all extracted files and paste them into an SD card(Make sure to format it to FAT32) - Now plug the OTG Card reader with SD card into the unit then power on - Leave it for 30 seconds to flash. Once it's done test the unit again and update here.
|
|
|
I finally found the backup I wrote down after using Gavin Andresen's Bitcoin faucet. I don't remember if I was using only Bitcoin Core, Armory, or something like Multi-bit. Those sound familiar.
If the backup private key was generated from the year 2009 to 2010 I'm sure it was not created from Armory or multibit wallet because these two wallets was announced between year 2011 and 2012. Thanks for the information. The public address starts with a 1 and here it is: 1DYFqhdKDkHYytVn66QWKGY4PUebNYH9j9
The character starts with most likely an A or 1, but read another way these are the first three 001.
If it starts with 001 then it's a binary format you might need to covert it to the WIF key format to be able to import it to other wallets like Electrum
|
|
|
Why such a question at all when everyone who has been active in this board should already know the answer - every few weeks/months the OP appears with identical questions to which he has already received countless answers. The conclusion has long been more than clear, he simply does not accept anything he reads here.
I just checked and yeah based on his post history he already asked this many times but he doesn't do anything. It seems that he doesn't care about the responses or he might have color blind sickness(black color vision deficiency)
|
|
|
Username: BitMaxz BTC SegWit Address: bc1qptg5vvtmwwgn96qgwgalpflqjvxxmvlwmu8529
|
|
|
If you are afraid of someone randomly generating or guess the same seed phrase as yours why not use "extended seed with custom word" when creating a new wallet?
It's an extra layer of security that can prevent hackers from guessing the seed phrase or even the main seed phrase being compromised without the custom word they won't be able to open the right wallet.
|
|
|
Applying for Signature Campaign
Edit: Rank: Legendary Alternative choice (optional): Merit earned in the last 120 days: 99 Bech32 address: bc1qptg5vvtmwwgn96qgwgalpflqjvxxmvlwmu8529
|
|
|
Waiting for the bitcoin price to fall before purchasing some bitcoins may not be the ideal strategy to follow while stockpiling your crypto assets. You never know if this is the lowest the price can go, and if you wait for it to go lower, you may be compelled to buy at a higher price later since it did not go lower again. This is where the Dollar Cost Averaging method comes into play to meet your purchasing needs; it will cover for the times you bought at a higher price when the price drops to buy again. Considering the crypto market is big and price movement is unpredictable, we can never forecast where it will go.
That strategy works on those who don't know how to read the market and only those who want to hold assets for an extended period of time. DCA strategy looks the same as the martingale strategy and I think if you combine DCA while analyzing the market on what price has resistance will allow you to maximize and buy more at the bottom price unlike without analyzing the market.
|
|
|
Current post count (including this one): 11179 Rank: Legendary bech32 address: bc1qptg5vvtmwwgn96qgwgalpflqjvxxmvlwmu8529 Merit earned in the last 120 days: 99
|
|
|
It's weird that you didn't read the sticky thread here in this section as a newbie you should read them because all newbies needs are already on sticky threads sample this thread " Newbies - Read before posting". I have question is your purpose why are you here? Why you are confused? It would be better if you could tell us why you are confused and about everything that you like to know. If it's all about the forum then the link I provided above should be the right thread for you.
|
|
|
I have experience with these tactics by scammers that I thought it came from official telegram. I received a notification from a telegram group(fake) that I thought it was official but after asking a few questions about the coins that I mined the weird thing that I noticed is they said they are migrating to the Solana blockchain old coins will no longer be usable after migration and they asked to send my backup seed or backup wallet to migrate my coins to a new blockchain.
After reading that message from him that I thought official support in their telegram I did much research until I found out it was a fake telegram group I just went to the real website and I clicked the telegram group it redirected me to the original telegram group and I ask about the migration but they said there was no migration and the telegram group that I access recently is fake. I was lucky I didn't fall into their trap I tried to search for the fake telegram group but, weirdly, I can't able to find it anymore However, on my dummy telegram account I can still access them it's weird they do have the same username when I search it.
|
|
|
I was a victim of this trick through an airdrop I applied for. Since my wallet was hacked it has made me deploy a strategy that anytime I'm applying for any airdrop I should use a separate wallet entirely, and I stopped applying for any airdrop that we required me to connect to their website and pay a little fee to claim my airdrop.
That's a common case and also there is another case in which you can receive an airdrop directly to your wallet without connecting the wallet they randomly send airdrops to all of their victims. Once you receive this token in your wallet like other newbies they eagerly look for a way to exchange or swap but they don't know that's a trick to push you to an unknown website with some script to steal all your funds from Metamask. It happens to me but I'm lucky that I only have a small amount of BNB. The value of the token is the reason why I was attracted to swap it but it ended up the value is fake.
|
|
|
Usually, it's due to price spikes your stop loss might be triggered at the worse price during these sudden price drops. Or it might be due to the "Bid-ask Spread" If you want to know about it Binance has a good explanation about this below. - https://www.binance.com/en-NG/feed/post/588182
|
|
|
That's too risky to invest in cloud mining or flexible savings offers from exchanges like Binance. And about new tokens with 100% APR the price of that token could drop quickly so instead you making a profit it turns to a negative profit due huge price drop of that token.
I had bad experiences investing most of them were cloud mining All my investments never returned and most of them were scams except investing my money in hardware miners It made me profit before I stopped mining due to high electricity costs and profit drop.
|
|
|
Since Windows 11 is pretty new I never heard of someone yet running Compac F successfully with this OS but would you mind to try all possible solutions from Kano? Check the troubleshooting guide here https://kano.is/gekko.php#trfIf still does not work then try to switch to Linux OS.
|
|
|
What's the purpose of using that tool? It is not a tool to generate or create a wallet read this below if what it is used for. Javascript cryptography implementation. Crush to remove comments, shorten variable names, and generally reduce transmission size. About the backup wallet that your friend created for you it might be a Schildbach wallet backup there is a tool to decrypt the wallet on their GitHub documentation. Check the link below for the guide - https://github.com/bitcoin-wallet/bitcoin-wallet/blob/main/wallet/README.recover.md
|
|
|
What I struggle with is understanding how close a block is to completion ?
So what I think you mean is that you want to see the progress during solving a block?. On the Ckpool solo, I do not see or any indicator that determines how close a miner is to solving a block. Maybe other mining pools have an indicator where you can monitor the progress while solving a block. Actually, if you are mining solo in ckpool you don't need to worry about solving the block because what you need to do to get rewarded is to find a block. Please read the solo ckpool page.
|
|
|
By the look of your answer, it is not ok when the miner has a 42% hardware error rate? I don't understand the answer from the owner of Bitcoin Merch then.
For me, it is not ok if the miner reaches almost 50% of the hardware error but this issue can be solved and according to your hashrate for me, it looks fine. Sometimes this issue comes up on the first run and the miner needs to be warmed up first to get rid of this issue. So I suggest try to reboot the miner after warmup and now monitor the hardware error. If the issue is still there then downclock the miner.
|
|
|
|