glad to see LiskHQ around answering questions and solving problems! means a lot keep up the good work guys!!! Ty, however now I have an interview. Later guys.
|
|
|
how many confirmations does bittrex need? I've sent 450 lisk an hour ago and got 290 confirms, - balance still not updated and status is pending..
Check here : https://poloniex.com/depositHistory Normally are 303 (poloniex) confirmations. Why does Poloniex and Bittrex need so many confirmations for LSK? These are 3 forging rounds. A security measure.
|
|
|
Dear Lisk Team,
After receiving an email about what went well and what went bad during the launch of Lisk I feel I misbehaved on this thread during launch.
Hereby I would like sincerely apologize for my misbehaving. I Hope this message finds you.
Good luck to the team.
Cheers
Thank you.
|
|
|
I raised these concerns about the high fee, I agree its far too much If you send 10 Lisk from Bloombit to Poloniex, you will receive 9.7 Lisk at Poloniex.
Why such a big fee? This fee is like sending expensive Paypal to Paypal transaction :/
I don't know Bloombits technology. Either they have a fee of 0.1 LSK for themselves for every transaction or they first send the LSK from a hot wallet to your own Bloombit wallet. Bloombit -> Your private Poloniex wallet Your private Poloniex wallet -> Poloniex hot wallet 0.3 LSK fee at least suggest there are 3 transactions.
|
|
|
From the Desk of Peer2peer36o Group To: Lisk community and hardcore supporters ●Promise not to hoard Lsk ●Cleanse Lsk of the inexperience (remove the cancer) ●Increase your buy orders for motivated sellers ● place a buy order for every incoming dump u see ● If Lsk is a mutli-billion dollar tech, - treat it like one. ● remove small minded investors which are a hazard & a hinder to the real growth of this project. Lsk must be in the rights hands for the value to increase. Hoarders (early adopters) + continuous development of blockchain apps, + an ever-expanding Lisk commumity & this project will likely experience a stampede or a spike in trade volume.. This is only the beginning... Peer2peer36o Could you please. For the love of god. Stop pretending to be some sort of wise investor / mogul. You can barely type one coherent sentence. He is a part of the Lisk community. He can say what he wants to say. That's why we didn't create a moderated thread. Thanks.
|
|
|
So, meine ersten Lisks kommen bei Polo an. Sehe ich das richtig? Die Fee wird beim Versand UND beim Empfang der Lisks bezahlt? Oder ist das nur ein Polo-Ding, daß die da noch was abzocken?
Wenn Du über deinen Lisk Client 100 LSK an Poloniex sendest, beträgt die Fee 0.1 LSK. Es kommen also 99.90000000 LSK auf deinen Account bei Polo an. Du redest vom Client, richtig? Ich habe den Weblogin benutzt. Dort wurden 0,1 Lisk für das Versenden abgezogen (vom vorhanden Guthaben) und es sind noch zusätzlich 0,1 Lisk weniger bei Polo angekommen. Also insgesamt 0,2 Lisk Fee. Also ist das ein Ding der Weboberfläche? Poloniex schickt die LSK nochmal weiter an eine interne Wallet. D.h. 2 Transaktionen finden insgesamt statt -> 2x0.1LSK als Gebühr.
|
|
|
I transferred 10000 lisks ten hours ago but there is still ZERO confirmation, how can I fix it? I use Docker to do the transaction. @LiskHQ
Please just send them again from https://login.lisk.io/. Should work, please try it out. just try it from dedicate node https://lisknode.grumlin.com/It work 100% I don't trust any website except officials. Don't worry, I used it to send my Lisk to Poloniex and all it's ok! I just sent 25000 lisk with login02 now, tx: 13182945360918948640, hope this time it will work fine. login.lisk.io should work.
|
|
|
24 hours with Lisk — StatisticsThe first day is over and we want to use this opportunity to showcase some network statistics of the last 24 hours (approximately). We are very happy that the network is enduring the big number of transactions and we will continue to keep an eye on it. Currently, there are about 350 nodes connected to the Lisk network with the majority of them running on Unix. Other operation systems are popping up sporadically, probably because they are used by traders to send their LSK around. During the past 24 hours we had 7537 blocks from which 4801 blocks (~63.7%) were not empty. They contained 159,114,990 LSK, i.e. 159% of the total supply. Therefore, every LSK was sent around 1.59 times on average. That means during the past 24h we saw a transaction volume of nearly $42,000,000. Just one day after launch we already see 268 community delegates. Until now nobody got enough votes to get into the top 101. We are sure that this will happen during the first week, once things have calmed down. The current price for 1 LSK is approximately 0.00058 LSK/BTC. We are at rank #6 on CoinMarketCap and had a 24h volume of 19,000 BTC or $8,560,000. https://blog.lisk.io/24-hours-with-lisk-statistics-4f0fd0cd820d
|
|
|
I transferred 10000 lisks ten hours ago but there is still ZERO confirmation, how can I fix it? I use Docker to do the transaction. @LiskHQ
Please just send them again from https://login.lisk.io/. Should work, please try it out. Actually I have tried https://login.lisk.io/ https://login01.lisk.io/ and https://login02.lisk.io/, they all can't work, this is why I tried it with Docker, when I use Docker, it can send small amount of lisk but if it is greater than 10000, there will be ZERO confirmation. When did you try login.lisk.io? Longer than half an hour ago? Try again then, please.
|
|
|
I transferred 10000 lisks ten hours ago but there is still ZERO confirmation, how can I fix it? I use Docker to do the transaction. @LiskHQ
Please just send them again from https://login.lisk.io/. Should work, please try it out.
|
|
|
Ok. Glad that it's working for you! yes i pretty sure you were right, thanks anyway. what will i do now? my passphrases aren't recognized and i have an account with 0 lisk..
What do you mean exactly? You get the correct address but it's empty? Please contact support. http://support.lisk.io/
|
|
|
Thank you. Installing the client is the way to go. Using the web login is centralized, this is not the end goal for us.
|
|
|
I have an error reponse from the daemon but i don't know how to fix it or if this is normal.
Gonna try again the web wallet
You have multiple instances of Lisk open. It can't work like that because 2 (or more) apps are using the port 8000 on your system. Solution: Get all docker container id's: docker ps -a Stop all docker container (replace container_id with your own id), you have to do this step for every new id: docker stop container_id YESSSSSSSSSSSSSSSSSSSSSS ITS WORKING OMFG THANKS That was fast. i didn't even try it because https://login04.lisk.io/ just worked few minutes ago but i guess you are right Ok. Glad that it's working for you!
|
|
|
I have an error reponse from the daemon but i don't know how to fix it or if this is normal.
Gonna try again the web wallet
You have multiple instances of Lisk open. It can't work like that because 2 (or more) apps are using the port 8000 on your system. Solution: Get all docker container id's: docker ps -a Stop all docker container (replace container_id with your own id), you have to do this step for every new id: docker stop container_id YESSSSSSSSSSSSSSSSSSSSSS ITS WORKING OMFG THANKS That was fast.
|
|
|
I have an error reponse from the daemon but i don't know how to fix it or if this is normal. Gonna try again the web wallet You have multiple instances of Lisk open. It can't work like that because 2 (or more) apps are using the port 8000 on your system. Solution: Get all docker container id's: docker ps -a Stop all docker container (replace container_id with your own id), you have to do this step for every new id: docker stop container_id
|
|
|
it doesn't sync, did you even try it to say shit like this? Please just wait a while. After a few minutes you should see new blocks. It may take 10 minutes if you have a slow computer.
|
|
|
I have used this lisknode.grumlin.com And now my trnasaction have confirmations, now my question is How much confs are neccessary to see Lisk in Polo?
You should be able to see them immediately on the deposit page. It takes 303 confirmations (3 rounds) to be accepted. It takes about 70 confirms before your deposit will show as pending in polo..and then 303 to actually confirm. Good to know. Danke!
|
|
|
I have used this lisknode.grumlin.com And now my trnasaction have confirmations, now my question is How much confs are neccessary to see Lisk in Polo?
You should be able to see them immediately on the deposit page. It takes 303 confirmations (3 rounds) to be accepted. Now I see it! How much time it takes? Thanks 1 confirmation is 10 seconds. 303 confirmations about 51 minutes.
|
|
|
I have used this lisknode.grumlin.com And now my trnasaction have confirmations, now my question is How much confs are neccessary to see Lisk in Polo?
You should be able to see them immediately on the deposit page. It takes 303 confirmations (3 rounds) to be accepted.
|
|
|
|