I am working on getting the signed copy of the various agreements / registrations with the Hong Kong Corporation prepared and sent out to two neutral 3rd parties to vouch for their validity. If this cannot be done prior to noon, EST, I will gladly postpone the IPO until said people can verify the agreements. Additionally, I will provide them a redacted copy of the purchase agreement for 2150 N. Court Street, which will show that we have 90 days to purchase the building, and we are said winners of auction that took place on June 12th.
I am in possession of the signed real estate agreement as well as the executed agreement with mentioned HK Corp. Post it. I don't see the need to do so. I am confirming that stated info is correct. Folks can make up their own mind based on our reputations, or lack of them.
|
|
|
Post it.
I don't see the need to do so. I am confirming that stated info is correct. Folks can make up their own mind based on our reputations, or lack of them.
|
|
|
About only 15 hours left till IPO, whereupon prior Benny will be releasing to the world who the fuck is John Kenton Freeman.
Also, to date, Benjamin Schlichter has yet to provide proof that he did indeed win the auction for the 68,000 sq ft warehouse located at 2150 N Court St, Circleville, OH, in spite of the auctioneer claiming such was not the case.
What part of being scammed by a couple redneck fat asses don't you fuckers understand?
I am in possession of the signed real estate agreement as well as the executed agreement with mentioned HK Corp.
|
|
|
I am working on getting the signed copy of the various agreements / registrations with the Hong Kong Corporation prepared and sent out to two neutral 3rd parties to vouch for their validity. If this cannot be done prior to noon, EST, I will gladly postpone the IPO until said people can verify the agreements. Additionally, I will provide them a redacted copy of the purchase agreement for 2150 N. Court Street, which will show that we have 90 days to purchase the building, and we are said winners of auction that took place on June 12th.
I am in possession of the signed real estate agreement as well as the executed agreement with mentioned HK Corp.
|
|
|
These ratings don't make sense. Case and point, ASICMiner is #1, but no longer ships any miners, only chips. However, you ding a company like RockMiner with 1/10 on using own chips BECAUSE they use ASICMiner chips, your #1 rated company...
BTW, ASICMiner should be #1, but why ding other companies who use their chips? this is flawed.
|
|
|
Bitmain and rockminer are your current choices. Bitmain is shipping within a week or two, rockminer will ship within 24 hrs during business week
|
|
|
I am also willing to buy few! Thanks
I got a PM from Benny 198S after posting this Hi, Thanks for the interest in my Antminer S3 group buy - https://bitcointalk.org/index.php?topic=682528.40Units are in stock ready for immediate dispatch. Current price including express shipping = 0.78BTC Payment address : 12SftuuQKaT8M4AhLzNeuQqEFZUkw5buPg After payment please pm me the transaction I.D and your shipping address. Thanks, Benny1985 Beware guys!Uh oh. So a guy named Benny198S sent that to you? I was worried, and checked my outbox, and I can confirm that I did NOT send you, or anyone a PM like that. On topic: We got confirmation from BitMain that the S3's are en-route to me. It looks like they haven't been scanned in by UPS quite yet, but given my dealings with them prior to this, it should happen at sometime today. As per the E-mail I sent out to buyers a few minutes ago, we do have a few units left (10) available @ $485 on the site. If there are any questions, let me know! I got the same PM from Benny 198 SI will amend the initial post stating about this fraud. joined tomatoecage and added another scammer tag, should help people see it in their PMs https://bitcointalk.org/index.php?action=profile;u=357851
|
|
|
2 please.
when do you want the funds?
when I open the group buy, if I do
|
|
|
try one device per Pi, if you haven't already, does it help? also, have you tried bypassing the USB hub included with each unit? If so, did it make a difference? Finally, what was the result of switching the MCU boards around? it's the little board the provides USB interface from a blade. did blades behave differently with switched MCUs? meaning that blade is not the issue and maybe the blade control unit is? Reboot's are a problem when some of the blades do not come back to full ghs!!! and stay at 30-40ghs until they have the usb cable removed to reset. Elapsed GHS av GHS 5s GHS 15m Accepted Rejected Rej% 7 h 33 m 49 s 373 GHS 370 GHS 373 GHS 2246 30 1.32 ID Temperature GHS av GHS 5s GHS 15m 1 40 112 GHS 117 GHS 113 GHS 2 43 111 GHS 110 GHS 111 GHS 3 44 111 GHS 104 GHS 111 GHS 4 36 38 GHS 41 GHS 38 GHSElapsed GHS av GHS 5s GHS 15m Accepted Rejected Rej% 1 h 24 m 8 s 375 GHS 373 GHS 373 GHS 413 24 5.49 ID Temperature GHS av GHS 5s GHS 15m 1 39 113 GHS 124 GHS 113 GHS 2 43 114 GHS 109 GHS 114 GHS 3 45 108 GHS 119 GHS 108 GHS 4 35 38 GHS 40 GHS 38 GHSElapsed GHS av GHS 5s GHS 15m Accepted Rejected Rej% 4 h 33 m 44 s 896 GHS 864 GHS 894 GHS 2962 394 11.74 ID Temperature GHS av GHS 5s GHS 15m 1 44 115 GHS 118 GHS 117 GHS 2 45 114 GHS 107 GHS 113 GHS 3 42 130 GHS 119 GHS 130 GHS 4 44 116 GHS 108 GHS 115 GHS 5 42 125 GHS 119 GHS 125 GHS 6 43 125 GHS 118 GHS 124 GHS 7 43 126 GHS 129 GHS 125 GHS 8 37 41 GHS 42 GHS 41 GHSHow do you explain the above rockxie? Not caused by heat! the pi's are around 33deg and the room is 20deg C! 20% is a lot of hash rate to lose!!!! And it's not always just the last blade, it could be 1-3 blade that sit at 30-40ghs. How about standing behind your product addressing the stability. Even the miners listed on Rockminers R100 website (rockhash.com) dont show any run times over 14hrs. Best I've seen with mine was 16hrs but 1-4hrs is more common.
This stability issue seems to be affecting RK,R3 for sure and probably R4..
Reboot is not big problem, most important thing is hashrate and hashrate!! Reboot happened for temperature adaptive and only need seconds. 1 Try to power down and power up agian if you see this problem. 2 This problem may be caused by: 1 the PI , 2 the board,try to use one PI to drive one miner. 3 reboot is a nomal problem with cgminer and PI solution(all miners are affected using cgminer). cgminer will crash with some unknown problems,so the is a way when cgminer crash ,system will reboot the cgminer. rockxie, Just to keep you up to date and what I'm trying ( thanks for responding by the way). I've monitored and tracked the rk box since the post at the top of this message, I have found 5 different boards (out of the 16) that have not returned to full hash after a reboot. 1 faulted 5 times, 2 faulted 4 times, 1- 3 times and 1- 2 times. I powered down all boxes and changed the locations of the faulted control boards to see if the faults follow the control board or if they stay with the blades themselves. As to your suggestions above, this is what I've done so far 1) always powered down to try to reset, also reboot from GUI only to have unit start and the fault remained. Found it best just to pull the usb connection from the control board for a second. 2) I am using 1 pi per miner most times, I've changed out the pi's, changedout SD cards, reloaded SD cards. Also changed USB cables, hubs, and router to a switch. So I'm thinking it is either the control boards or the blades. I'll let you know. PS: has Rockminer considered going the route of the TP-Link TL-MR3020 instead of the pi much like Technobit offers? How about providing a .bin file for this!! Trends
|
|
|
Delivery depends on Mycelium production dates, I have no control over them. Currently scheduled for October 2014
now in hand and shipping
|
|
|
OK folks, I have them in hand. cost is .10 0.15206813 per unit. please send btc to 1Ex5CHXBPGSw93LSpMUeZxwt71XYaANMzvI will not PM you any payment addresses. Use only the address posted here. (scammers/imposters will try to contact you) email me a shipping label to canary.btc@gmail.comThe from and to addresses are both yours. Designate shipping from 60181 zip code. also you must send btc from an address you can sign a message with. when emailing me a pdf shipping label, in the body of the message include one of the input addresses and sign your tracking number. so that might look like this (example only): 1Ex5CHXBPGSw93LSpMUeZxwt71XYaANMzv 9361589178306211219122 IJ3gQyVz1vqg04bV2HjyPFCYzLiOlEFMfr3a9lveoOp+c9UwiF/CEdgxnM5QUtvf+AilrPHJ6jMDC39lBLjcLJU= 8 units fit into a small priority flat rate box the first people who have first priority are those who posted here expressing interest. I've PMed you. list of printers that had been tested by the maker: https://www.reddit.com/r/Bitcoin/comments/2xp6ss/mycelium_entropy_update_for_monday_march_2nd/
|
|
|
Considering buying one (or more), but just out of curiosity, why aren't you just having these shipped to yourself and selling them on eBay for more profit than you can here?
Because I don't really use eBay. I don't like using Paypal and eBay just seems a waste too me. I would rather receive bitcoins then Paypal. But that's a good idea, I see where you're coming from. Maybe I'll do it in the future. Please provide full price for delivery gopro3 black edition to UK/london.
Im ready to sent btc to escrow. Please respond as soon as possible.
$200 via bitcoins is the full price. This isn't a gopro3, this is a GoPro Hero3. Once you have sent to escrow PM me the details to ship, then also get the escrow user to PM me saying he has got the bitcoins. Because I don't know who this guy is we are using for escrow. Im going to send BTC to canaryinthemine-https://bitcointalk.org/index.php?action=profile;u=18614 This is well trusted BTCtalk user. He is aware and will confirm openly in the thread that btc are received. 200$ is at this moment 0.33btc plus fee 0.01btc for escrow. Sending now. 0.33 is $197 but alright when he replies to my thread then PM me the information that you want the GoPro shipped too. I use https://www.google.co.uk/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=usd%20btc And 200 is 0.33 btc sent already just wait for confirmation and we can proceed. Confirming receipt of .33 btc plus .01 fee
|
|
|
Hello folks, I have some rockminer t-shirts to give away from the Chicago conference. If you've posted on this thread and would like one, please PM me. While supplies last.
Nice! PM'd, not sure if you have any mediums but I'd trade ya an R-Pi case or two (or something else 3d printed) for a tee no need to trade me, they are free from RockMiner. Still have 1 XL RockMiner white tshirt available and 2 Medium and 2 Small pink (ladies) tshirts.
|
|
|
RockMiner will accept an order for R3 @ $500 USD or for R4 @ $510 USD. Wire transfer, bank info will be provided. Minimum order is 20 units, max order is 100 units. This is designed for large buyers and/or mining operations who want to spend dollars instead of bitcoins for in stock items. Shipping time is about 3 business days. All units in stock and ready to ship. Feel free to contact me with questions etc... R4 info and pics: http://shop.rockminer.com/goods.php?id=43
|
|
|
Havelock could be an option
|
|
|
Your list is very comprehensive, thanks!!
-edit, in case you didn't see, the upcoming Israel conf. has been postponed
|
|
|
To say all self moderated topics are a sign of scam can not be deduced logically. Self moderated does not automatically mean a scam. Buyer should still perform all due diligence, self moderated post could be a contributing factor among many things to consider.
|
|
|
Very interesting.. Although the sum of 2400 BTC seems very very high..
Do you plan on developing your own chips? Who do you have on board development wise for ASIC chips and PCB design?
2,400 BTC is a lot, but we believe the revenue we've generated justifies the asking price. We would like to eventually develop a chip, but the capital costs are far beyond even 2,400 BTC. We would rather start with mining hardware/contracts/in-house mining and work our way up, rather than start with chips and then hope that they tape out. can you clarify which generated revenue you are referingto, the 400K and the 40K profit mentioned before?
|
|
|
Folks, if anyone has one of these break out boards they no longer need, I'd be interested in taking it off your hands... or if anyone knows if these are still sold by someone who has inventory, please let me know. Feel free to PM me. Thank you!
|
|
|
Is possible to combine R-Boxes and R3 connected to same computer using cgminer ?
via a USB connection, yes
|
|
|
|