Nanopool now supports Stratum for Siacoin too. Dual mining samples:
With worker and email notifications (recommended):
EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal YOUR_ETH_WALLET/YOUR_WORKER/YOUR_EMAIL -epsw x -dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal YOUR_SIA_WALLET/YOUR_WORKER/YOUR_EMAIL -dcoin sia
Please, give an example of dpools.txt for nanopool and Stratum for Siacoin. I've tried to use: POOL: sia-eu1.nanopool.org:7777
POOL: sia-eu2.nanopool.org:7777
POOL: sia-us-east1.nanopool.org:7777
POOL: sia-us-west1.nanopool.org:7777
POOL: sia-asia1.nanopool.org:7777
and POOL: sia-eu1.nanopool.org:7777, WALLET: sia_wallet/worker/email
POOL: sia-eu2.nanopool.org:7777, WALLET: sia_wallet/worker/email
POOL: sia-us-east1.nanopool.org:7777, WALLET: sia_wallet/worker/email
POOL: sia-us-west1.nanopool.org:7777, WALLET: sia_wallet/worker/email
POOL: sia-asia1.nanopool.org:7777, WALLET: sia_wallet/worker/email
and it doesn't work. Don't forget about "stratum+tcp://" before pool address if you want to use Stratum and "http://" if you want to use HTTP. If you miss it, in some cases miner may use wrong protocol. |
|
|
|
|
Nanopool now supports Stratum for Siacoin too. Dual mining samples:
With worker and email notifications (recommended):
EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal YOUR_ETH_WALLET/YOUR_WORKER/YOUR_EMAIL -epsw x -dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal YOUR_SIA_WALLET/YOUR_WORKER/YOUR_EMAIL -dcoin sia
With worker:
EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal YOUR_ETH_WALLET/YOUR_WORKER -epsw x -dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal YOUR_SIA_WALLET/YOUR_WORKER -dcoin sia
Without worker:
EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal YOUR_ETH_WALLET -epsw x -dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal YOUR_SIA_WALLET -dcoin sia
|
|
|
|
I am mining at Nicehash, bu I keep seeing that red X: "Not using extranonce.subscribe. Mining performance is degraded."
Is it true that it effects mining and how can I force extranonce.subscribe? EDIT: I am getting really low difficulty shares, and a lot of bandwidth! I upgraded to 5.2 and I'm having this issue as well on nicehash for ETH (Decred works fine and has a green check) I'll check it now. claymore, i'm trying to get started with exp on,it connects to pool then says job timeout disconnect retry in 20 secs?? this is my bat file
EthDcrMiner64.exe -epool exp-eu.dwarfpool.com:81/0xcbfcf***********/rig1 -epsw -esm -allcoins exp
any ideas?
Your bat is strange, read readme for correct sample for dwarfpool and just change pool address to EXP pool. |
|
|
|
v5.2:- added Stratum for Siacoin. Currently not all Stratum versions are supported, check help page of your pool for details. - bug fixes. Notes: - not many changes in this version since I'm working on Nvidia support, it takes a lot of time. - currently Stratum for Siacoin works only with miningpoolhub pool: https://siacoin.miningpoolhub.com/This pool asked me about stratum and I added it. While I was implementing it, two different stratum versions were created, by siamining and suprnova pools. I will add support for them later if they think that their stratums are better. Also nanopool was testing my stratum version, may be they will support it soon too. Hi Claymore - any ETA on NVIDIA? Not rushing or anything.. but need some dates so that I can plan a rig with NVIDIA GPUs. Thanks |
|
|
|
v5.2:- added Stratum for Siacoin. Currently not all Stratum versions are supported, check help page of your pool for details. - bug fixes. Notes: - not many changes in this version since I'm working on Nvidia support, it takes a lot of time. - currently Stratum for Siacoin works only with miningpoolhub pool: https://siacoin.miningpoolhub.com/This pool asked me about stratum and I added it. While I was implementing it, two different stratum versions were created, by siamining and suprnova pools. I will add support for them later if they think that their stratums are better. Also nanopool was testing my stratum version, may be they will support it soon too.
|
|
|
|
ANN.
I released dual miner for AMD three months ago, still noone created similar public miner for Nvidia (though may be there are private miners, I don't know). I did not expect it.
I have an agreement not to create Nvidia miners, but it is about to expire.
So you will see dual miner for Nvidia soon anyway.
Strange agreement - nevertheless - any estimated time of Nvidia miner ? I'm working on it and it takes a lot of time. Right now the miner already supports Nvidia for ETH mining but I doubt that anyone is interested in it since it cannot offer better speed, so I don't release it for now. Dual mode is still under development, a different approach is required (compared to AMD), hope to finish it in 1-2 weeks, it's a lot of work and tests on different hardware. |
|
|
|
How can I test it?
Either you create a new account and create a new rig there or I already set you one up here: http://rig.rent/rigs/30896To get it to run at all you can use this config: POOL: eu-01.miningrigrentals.com:3344, WALLET: Gigadroid.30896, WORKER: Gigadroid.30896, ALLPOOLS: 1, ALLCOINS: 1 Ok, I've created the following config.txt: -epool eu-01.miningrigrentals.com:3344 -ewal Gigadroid.30896 -eworker Gigadroid.30896 -allpools 1 -epsw x It works and miner sends shares, pool accepts them. |
|
|
|
Hey @Claymore,
I'm a user of your miner since the first version and always loved it but now I got a problem.
I tried to use this miner with miningrigrentals.com.
If I put my user and rigname as wallet address it seems to work at first but never submits any shares.
I already tried different Stratum modes but it doesn't help
Could you add support for miningrigrentals.com?
How can I test it? |
|
|
|
The DevFee DAG switch is messing up all my 2GB cards whenever I am mining a coin other than ETH/EXP.
Can this be fixed please?
gser -2, doesn't help.
Try option "-allcoins -1" (note "-1", not "1"), that's the only way if you mine a coin other than ETH/ETC/EXP and have problems. |
|
|
|
@claymre
can u put also ETC to yr calculator ..?
I don't have any calculators for this miner. |
|
|
|
Claymore, Any way to support ETC and ETH dual mining ?
It's similar to mine ETH and EXP at once, for example. No way. |
|
|
|
ETH: Received error: {"jsonrpc":"2.0","error":{"code":-32600,"message":"Invalid request","data":null},"id":null}
PM the log. Full. |
|
|
|
Claymore.... any chance for a 3rd coin.... LBRY? Thoughts? Thanks
Not so fast. Even Siacoin implementation is not finished yet due to missed stratum. Clymore are you going in the future to build something in DM, for nvidia? or this is a lost case?
Yes I'm going to release dual miner for nvidia, I already mentioned it recently here. |
|
|
|
pls, add solo with parity (ethcore).
From readme: ... Ethereum SOLO mining (assume geth is on 192.168.0.1:8545): EthDcrMiner64.exe -epool http://192.168.0.1:8545... you tested? Yes. v5.1 Beta2. |
|
|
|
Can you please add Stratum Support for SIA at https://sia.suprnova.ccI have 99.6% efficiency there with stratum and about the same speed with the Windows miner by wolf which is much better The problem is every pool started to implement own Stratum protocol for Siacoin, it's not a good idea. Now I check them in details... Message me or contact me in IRC if you need any help, my implementation is quite similar to DCR implementation. Actually there is no other stratum implementation for Sia currently. What about this? http://siamining.com/helpI'm unsure why they changed the the header specs, it's still no "true" stratum, it's the also regular getwork-over-tcp like my implementation just with longer ntime and nonce fields - it would have been wiser to communicate and build ONE protocol where everyone works on instead of forking "my" sgminer and changing some values and calling it "true" stratum  However, you might want to implement both, the second one just uses longer fields. I don't want to implement both though I can add an option to miner which will select protocol. The reason is that several protocols will cause problems when users will try wrong option value. And then they will ask me why my miner does not work, again and again, on every page. As a pool owner, you implement one Stratum version. But I have to support them all. There is also third stratum version, mine (in ethereum-proxy style), so it becomes really funny. I will add support for all protocols if you cannot select some one stratum version, but it will take some time. |
|
|
|
pls, add solo with parity (ethcore).
From readme: ... Ethereum SOLO mining (assume geth is on 192.168.0.1:8545): EthDcrMiner64.exe -epool http://192.168.0.1:8545... |
|
|
|
Here's my config:
-epool eu1.ethermine.org:4444
-ewal <<deleted>>
-eworker back
-epsw x
-dpool stratum+tcp://siamining.com:3333
-dwal 8ecba09c000b277247231a01f90e6de34d53da8207039be85c0f02cd485d0945b7fe5eeed2a6
-dpsw x
-dcri 45
-esm 0
-mode 0
-dcoin sc
#-tstop 85
-powlim 0
-dbg -1
-di 01
Miner reports 1000+ Mhash rate but website says it never submitted any share.
No Stratum support for Siacoin yet. But I will add it soon. BTW, if you use latest version, miner won't accept "stratum+tcp" for Siacoin and will show error. |
|
|
|
Can you please add Stratum Support for SIA at https://sia.suprnova.ccI have 99.6% efficiency there with stratum and about the same speed with the Windows miner by wolf which is much better The problem is every pool started to implement own Stratum protocol for Siacoin, it's not a good idea. Now I check them in details... Message me or contact me in IRC if you need any help, my implementation is quite similar to DCR implementation. Actually there is no other stratum implementation for Sia currently. What about this? http://siamining.com/help |
|
|
|
Can you please add Stratum Support for SIA at https://sia.suprnova.ccI have 99.6% efficiency there with stratum and about the same speed with the Windows miner by wolf which is much better The problem is every pool started to implement own Stratum protocol for Siacoin, it's not a good idea. Now I check them in details... |
|
|
|
|
Show Posts
