|
blg42598
|
 |
September 14, 2016, 11:58:21 PM |
|
Which Crimson version is best to use for Sapphire RX 480 Nitro? I used the latest one but claymore crashes on start.
do u try 15.12? 15.12 doesn't support rx 480 |
|
|
|
|
|
megacrypto
|
|
September 15, 2016, 12:11:44 AM |
|
I'm on linux 14.04.4 with fglrx 15.20.3 and a 2gb XFX 5450 card (which works with cpp-ethereum) i executed the following: export GPU_FORCE_64BIT_PTR=0
export GPU_MAX_HEAP_SIZE=100
export GPU_USE_SYNC_OBJECTS=1
export GPU_MAX_ALLOC_PERCENT=100
export GPU_SINGLE_ALLOC_PERCENT=100
then ran the prog: ./ethdcrminer64 -epool us1.ethpool.org:3333 -ewal 0x5ecaf01c5cC7E18555E074AA13ec13a1e9532Ca7 -epsw x -mode 1 -di 1
(I have an AMD A8 CPU with has an R7 GPU but only 512mb allocated to it so i selected to use only the second card -di 1) but still i get a "-55 (0)" error: 02:01:06:347 c4d46780 args: -epool us1.ethpool.org:3333 -ewal 0x5ecaf01c5cC7E18555E074AA13ec13a1e9532Ca7 -epsw x -mode 1 -di 1
02:01:06:348 c4d46780
02:01:06:348 c4d46780 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
02:01:06:348 c4d46780 º Claymore's Dual ETH + DCR/SC/LBC GPU Miner v7.0 Beta º
02:01:06:348 c4d46780 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
02:01:06:348 c4d46780
02:01:06:549 c4d46780 ETH: 1 pool is specified
02:01:06:549 c4d46780 Main Ethereum pool is us1.ethpool.org:3333
02:01:06:554 c4d46780 OpenCL platform: AMD Accelerated Parallel Processing
02:01:06:554 c4d46780 OpenCL initializing...
02:01:06:554 c4d46780 AMD Cards available: 2
02:01:06:554 c4d46780 GPU #0: Cedar, 2048 MB available, 2 compute units
02:01:06:554 c4d46780 POOL/SOLO version
02:01:06:554 c4d46780 b221
02:01:06:571 c4d46780 start building OpenCL program...
02:01:24:709 c4d46780 done
02:01:24:709 c4d46780 GPU #0: set -etha as 1 (ETH algo for slow cards)
02:01:24:709 c4d46780 cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
02:01:24:709 c4d46780 No NVIDIA CUDA GPUs detected.
02:01:24:709 c4d46780 Total cards: 1
02:01:24:719 c4d46780 No NVIDIA cards in the list, NVML library will not be used.
02:01:24:819 c4d46780 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
02:01:24:820 c4d46780 ETH: eth-proxy stratum mode
02:01:24:820 c4d46780 Watchdog enabled
02:01:24:820 c4d46780 Remote management is enabled on port 3333
02:01:24:820 c4d46780
02:01:24:824 b52f8700 ETH: Stratum - connecting to 'us1.ethpool.org' <108.61.158.150> port 3333
02:01:24:984 b52f8700 send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x5ecaf01c5cC7E18555E074AA13ec13a1e9532Ca7", "x"], "id": 2, "method": "eth_submitLogin"}
02:01:24:985 b52f8700 ETH: Stratum - Connected (us1.ethpool.org:3333)
02:01:25:139 b52f8700 got 39 bytes
02:01:25:139 b52f8700 buf: {"id":2,"jsonrpc":"2.0","result":true}
02:01:25:139 b52f8700 parse packet: 38
02:01:25:139 b52f8700 ETH: Authorized
02:01:25:139 b52f8700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
02:01:25:139 b52f8700 new buf size: 0
02:01:25:293 b52f8700 got 237 bytes
02:01:25:293 b52f8700 buf: {"id":3,"jsonrpc":"2.0","result":["0x0d50db3bd28986a0bdf2cfcbee9159814fe8ae3affde948be94ee89de9ee2b79","0x60ead4b0f664a9994f7fd5deae34ba1d609e459c051cb0f7be8895dd88ec1aaf","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}
02:01:25:293 b52f8700 parse packet: 236
02:01:25:293 b52f8700 eth: job changed
02:01:25:294 b52f8700 new buf size: 0
02:01:25:329 b5af9700 Setting DAG epoch #75...
02:01:27:185 b5af9700 Setting DAG epoch #75 for GPU #0
02:01:27:185 b5af9700 Create GPU buffer for GPU #0
02:01:27:202 b5af9700 GPU 0, OpenCL error -55 (0) - cannot create DAG on GPU
02:01:27:822 c4d46780 Cannot get Overdrive capabilities for adapter 0
02:01:27:823 c4d46780 Failed to get fan speed
02:01:30:202 b62fa700 Setting DAG epoch #75 for GPU #0
02:01:30:210 b62fa700 GPU 0, OpenCL error -55 (0) - cannot create DAG on GPU
02:01:30:824 c4d46780 Cannot get Overdrive capabilities for adapter 0
02:01:30:825 c4d46780 Failed to get fan speed
any pointers? |
|
|
|
reb0rn21
Legendary
 Offline
Activity: 1905
Merit: 1024
|
|
September 15, 2016, 01:20:57 AM |
|
I'm on linux 14.04.4 with fglrx 15.20.3 and a 2gb XFX 5450 card (which works with cpp-ethereum) i executed the following: export GPU_FORCE_64BIT_PTR=0
export GPU_MAX_HEAP_SIZE=100
export GPU_USE_SYNC_OBJECTS=1
export GPU_MAX_ALLOC_PERCENT=100
export GPU_SINGLE_ALLOC_PERCENT=100
then ran the prog: ./ethdcrminer64 -epool us1.ethpool.org:3333 -ewal 0x5ecaf01c5cC7E18555E074AA13ec13a1e9532Ca7 -epsw x -mode 1 -di 1
(I have an AMD A8 CPU with has an R7 GPU but only 512mb allocated to it so i selected to use only the second card -di 1) but still i get a "-55 (0)" error: 02:01:06:347 c4d46780 args: -epool us1.ethpool.org:3333 -ewal 0x5ecaf01c5cC7E18555E074AA13ec13a1e9532Ca7 -epsw x -mode 1 -di 1
02:01:06:348 c4d46780
02:01:06:348 c4d46780 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
02:01:06:348 c4d46780 º Claymore's Dual ETH + DCR/SC/LBC GPU Miner v7.0 Beta º
02:01:06:348 c4d46780 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
02:01:06:348 c4d46780
02:01:06:549 c4d46780 ETH: 1 pool is specified
02:01:06:549 c4d46780 Main Ethereum pool is us1.ethpool.org:3333
02:01:06:554 c4d46780 OpenCL platform: AMD Accelerated Parallel Processing
02:01:06:554 c4d46780 OpenCL initializing...
02:01:06:554 c4d46780 AMD Cards available: 2
02:01:06:554 c4d46780 GPU #0: Cedar, 2048 MB available, 2 compute units
02:01:06:554 c4d46780 POOL/SOLO version
02:01:06:554 c4d46780 b221
02:01:06:571 c4d46780 start building OpenCL program...
02:01:24:709 c4d46780 done
02:01:24:709 c4d46780 GPU #0: set -etha as 1 (ETH algo for slow cards)
02:01:24:709 c4d46780 cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
02:01:24:709 c4d46780 No NVIDIA CUDA GPUs detected.
02:01:24:709 c4d46780 Total cards: 1
02:01:24:719 c4d46780 No NVIDIA cards in the list, NVML library will not be used.
02:01:24:819 c4d46780 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
02:01:24:820 c4d46780 ETH: eth-proxy stratum mode
02:01:24:820 c4d46780 Watchdog enabled
02:01:24:820 c4d46780 Remote management is enabled on port 3333
02:01:24:820 c4d46780
02:01:24:824 b52f8700 ETH: Stratum - connecting to 'us1.ethpool.org' <108.61.158.150> port 3333
02:01:24:984 b52f8700 send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x5ecaf01c5cC7E18555E074AA13ec13a1e9532Ca7", "x"], "id": 2, "method": "eth_submitLogin"}
02:01:24:985 b52f8700 ETH: Stratum - Connected (us1.ethpool.org:3333)
02:01:25:139 b52f8700 got 39 bytes
02:01:25:139 b52f8700 buf: {"id":2,"jsonrpc":"2.0","result":true}
02:01:25:139 b52f8700 parse packet: 38
02:01:25:139 b52f8700 ETH: Authorized
02:01:25:139 b52f8700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
02:01:25:139 b52f8700 new buf size: 0
02:01:25:293 b52f8700 got 237 bytes
02:01:25:293 b52f8700 buf: {"id":3,"jsonrpc":"2.0","result":["0x0d50db3bd28986a0bdf2cfcbee9159814fe8ae3affde948be94ee89de9ee2b79","0x60ead4b0f664a9994f7fd5deae34ba1d609e459c051cb0f7be8895dd88ec1aaf","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}
02:01:25:293 b52f8700 parse packet: 236
02:01:25:293 b52f8700 eth: job changed
02:01:25:294 b52f8700 new buf size: 0
02:01:25:329 b5af9700 Setting DAG epoch #75...
02:01:27:185 b5af9700 Setting DAG epoch #75 for GPU #0
02:01:27:185 b5af9700 Create GPU buffer for GPU #0
02:01:27:202 b5af9700 GPU 0, OpenCL error -55 (0) - cannot create DAG on GPU
02:01:27:822 c4d46780 Cannot get Overdrive capabilities for adapter 0
02:01:27:823 c4d46780 Failed to get fan speed
02:01:30:202 b62fa700 Setting DAG epoch #75 for GPU #0
02:01:30:210 b62fa700 GPU 0, OpenCL error -55 (0) - cannot create DAG on GPU
02:01:30:824 c4d46780 Cannot get Overdrive capabilities for adapter 0
02:01:30:825 c4d46780 Failed to get fan speed
any pointers? As far I know you must have 2GB to allocate full DAG in GPU ram, so maybe in bios you can up it to 2GB or not Aslo speed will be so low that electricity will cost the same or more |
|
|
|
|
megacrypto
|
|
September 15, 2016, 01:26:07 AM |
|
I'm on linux 14.04.4 with fglrx 15.20.3 and a 2gb XFX 5450 card (which works with cpp-ethereum) i executed the following: export GPU_FORCE_64BIT_PTR=0
export GPU_MAX_HEAP_SIZE=100
export GPU_USE_SYNC_OBJECTS=1
export GPU_MAX_ALLOC_PERCENT=100
export GPU_SINGLE_ALLOC_PERCENT=100
then ran the prog: ./ethdcrminer64 -epool us1.ethpool.org:3333 -ewal 0x5ecaf01c5cC7E18555E074AA13ec13a1e9532Ca7 -epsw x -mode 1 -di 1
(I have an AMD A8 CPU with has an R7 GPU but only 512mb allocated to it so i selected to use only the second card -di 1) but still i get a "-55 (0)" error: 02:01:06:347 c4d46780 args: -epool us1.ethpool.org:3333 -ewal 0x5ecaf01c5cC7E18555E074AA13ec13a1e9532Ca7 -epsw x -mode 1 -di 1
02:01:06:348 c4d46780
02:01:06:348 c4d46780 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
02:01:06:348 c4d46780 º Claymore's Dual ETH + DCR/SC/LBC GPU Miner v7.0 Beta º
02:01:06:348 c4d46780 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
02:01:06:348 c4d46780
02:01:06:549 c4d46780 ETH: 1 pool is specified
02:01:06:549 c4d46780 Main Ethereum pool is us1.ethpool.org:3333
02:01:06:554 c4d46780 OpenCL platform: AMD Accelerated Parallel Processing
02:01:06:554 c4d46780 OpenCL initializing...
02:01:06:554 c4d46780 AMD Cards available: 2
02:01:06:554 c4d46780 GPU #0: Cedar, 2048 MB available, 2 compute units
02:01:06:554 c4d46780 POOL/SOLO version
02:01:06:554 c4d46780 b221
02:01:06:571 c4d46780 start building OpenCL program...
02:01:24:709 c4d46780 done
02:01:24:709 c4d46780 GPU #0: set -etha as 1 (ETH algo for slow cards)
02:01:24:709 c4d46780 cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
02:01:24:709 c4d46780 No NVIDIA CUDA GPUs detected.
02:01:24:709 c4d46780 Total cards: 1
02:01:24:719 c4d46780 No NVIDIA cards in the list, NVML library will not be used.
02:01:24:819 c4d46780 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
02:01:24:820 c4d46780 ETH: eth-proxy stratum mode
02:01:24:820 c4d46780 Watchdog enabled
02:01:24:820 c4d46780 Remote management is enabled on port 3333
02:01:24:820 c4d46780
02:01:24:824 b52f8700 ETH: Stratum - connecting to 'us1.ethpool.org' <108.61.158.150> port 3333
02:01:24:984 b52f8700 send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x5ecaf01c5cC7E18555E074AA13ec13a1e9532Ca7", "x"], "id": 2, "method": "eth_submitLogin"}
02:01:24:985 b52f8700 ETH: Stratum - Connected (us1.ethpool.org:3333)
02:01:25:139 b52f8700 got 39 bytes
02:01:25:139 b52f8700 buf: {"id":2,"jsonrpc":"2.0","result":true}
02:01:25:139 b52f8700 parse packet: 38
02:01:25:139 b52f8700 ETH: Authorized
02:01:25:139 b52f8700 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
02:01:25:139 b52f8700 new buf size: 0
02:01:25:293 b52f8700 got 237 bytes
02:01:25:293 b52f8700 buf: {"id":3,"jsonrpc":"2.0","result":["0x0d50db3bd28986a0bdf2cfcbee9159814fe8ae3affde948be94ee89de9ee2b79","0x60ead4b0f664a9994f7fd5deae34ba1d609e459c051cb0f7be8895dd88ec1aaf","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba"]}
02:01:25:293 b52f8700 parse packet: 236
02:01:25:293 b52f8700 eth: job changed
02:01:25:294 b52f8700 new buf size: 0
02:01:25:329 b5af9700 Setting DAG epoch #75...
02:01:27:185 b5af9700 Setting DAG epoch #75 for GPU #0
02:01:27:185 b5af9700 Create GPU buffer for GPU #0
02:01:27:202 b5af9700 GPU 0, OpenCL error -55 (0) - cannot create DAG on GPU
02:01:27:822 c4d46780 Cannot get Overdrive capabilities for adapter 0
02:01:27:823 c4d46780 Failed to get fan speed
02:01:30:202 b62fa700 Setting DAG epoch #75 for GPU #0
02:01:30:210 b62fa700 GPU 0, OpenCL error -55 (0) - cannot create DAG on GPU
02:01:30:824 c4d46780 Cannot get Overdrive capabilities for adapter 0
02:01:30:825 c4d46780 Failed to get fan speed
any pointers? As far I know you must have 2GB to allocate full DAG in GPU ram, so maybe in bios you can up it to 2GB or not Aslo speed will be so low that electricity will cost the same or more The internal GPU does not have enough memory to work, but the second card has 2gb allocated to it and it works ok with ethminer? |
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
September 15, 2016, 05:20:24 AM |
|
The internal GPU does not have enough memory to work, but the second card has 2gb allocated to it and it works ok with ethminer?
Error is CL_INVALID_WORK_ITEM_SIZE You won't be able to start this miner on your videocard, it is not supported. It is possible to fix it though, I will try to do it in next update. |
|
|
|
|
wll1rah
|
|
September 15, 2016, 05:31:40 AM |
|
it's possible ethereum + expanse?
if possible as I do ?
sorry English , I am using translator
Most Americans can't write or talk any better than that. |
|
|
|
|
|
megacrypto
|
 |
September 15, 2016, 05:35:27 AM |
|
The internal GPU does not have enough memory to work, but the second card has 2gb allocated to it and it works ok with ethminer?
Error is CL_INVALID_WORK_ITEM_SIZE You won't be able to start this miner on your videocard, it is not supported. It is possible to fix it though, I will try to do it in next update. very much appreciated  |
|
|
|
anakbaru
Jr. Member
Offline
Activity: 60
Merit: 1
|
|
September 15, 2016, 05:40:57 AM |
|
how to fix amd adl library not found on ubuntu 16?
try to mine, but temp so high, above 78 C
thanks
|
|
|
|
|
Marvell1
Legendary
Offline
Activity: 2758
Merit: 1152
Leading Crypto Sports Betting & Casino Platform
|
|
September 15, 2016, 06:26:39 AM |
|
does this miner work with the geth proxy UI deal? I can never get that ethman thing to work
I have like 10 rigs really the only thing I like the pools for is they let me know when a miner is down via email, hard to do that with
this miner
why? just reserve your rig mac adress on router, them set -mport diferente por every one, them foward them on your router them save all settings on ethman And you can configure email notifications on this miner too ten rigs all with reserved addresses ? and Im thinking of adding a few more if the Augur sale thing makes me some money, seems like a ton of work having to port forward every new rig I add. I run windows 10 should'nt i just be able to open the ports on windows firewall or just turn it off and all the rigs should show up in the ethman deal ? I just feel that between the 2% fee for my pool and the 2% for the miner my 2400 GH should be getting more than the 12 eth i make per day according to the calculators I should be making closer to 15eth daily. Its not the pools perse tried a few different ones pretty much the same outcome. The main issue is solo mining would probbaly net me 1-2 extra blocks a week Solo here (on genoil 1.1.7)with 1ghs. Trust me if you have a good internet solo is your friend;) BR 1 gig seems really low to solo mine .. |
| ..Stake.com.. | | | ▄████████████████████████████████████▄
██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄
██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████
██ ██████████ ██ ██ ██████████ ██ ▀██▀
██ ██ ██ ██████ ██ ██ ██ ██ ██
██ ██████ ██ █████ ███ ██████ ██ ████▄ ██
██ █████ ███ ████ ████ █████ ███ ████████
██ ████ ████ ██████████ ████ ████ ████▀
██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██
██ ▀▀▀▀▀▀▀▀▀▀ ██
▀█████████▀ ▄████████████▄ ▀█████████▀
▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄
██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄
█ ▄▀▄ █▀▀█▀▄▄
█ █▀█ █ ▐ ▐▌
█ ▄██▄ █ ▌ █
█ ▄██████▄ █ ▌ ▐▌
█ ██████████ █ ▐ █
█ ▐██████████▌ █ ▐ ▐▌
█ ▀▀██████▀▀ █ ▌ █
█ ▄▄▄██▄▄▄ █ ▌▐▌
█ █▐ █
█ █▐▐▌
█ █▐█
▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄
▄██▀▀▀▀█████▀▀▀▀██▄
▄█▀ ▐█▌ ▀█▄
██ ▐█▌ ██
████▄ ▄█████▄ ▄████
████████▄███████████▄████████
███▀ █████████████ ▀███
██ ███████████ ██
▀█▄ █████████ ▄█▀
▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀
▀███████ ███████▀
▀█████▄ ▄█████▀
▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
d57heinz
Legendary
Offline
Activity: 1453
Merit: 1011
Bitcoin Talks Bullshit Walks
|
|
September 15, 2016, 06:35:22 AM |
|
does this miner work with the geth proxy UI deal? I can never get that ethman thing to work
I have like 10 rigs really the only thing I like the pools for is they let me know when a miner is down via email, hard to do that with
this miner
why? just reserve your rig mac adress on router, them set -mport diferente por every one, them foward them on your router them save all settings on ethman And you can configure email notifications on this miner too ten rigs all with reserved addresses ? and Im thinking of adding a few more if the Augur sale thing makes me some money, seems like a ton of work having to port forward every new rig I add. I run windows 10 should'nt i just be able to open the ports on windows firewall or just turn it off and all the rigs should show up in the ethman deal ? I just feel that between the 2% fee for my pool and the 2% for the miner my 2400 GH should be getting more than the 12 eth i make per day according to the calculators I should be making closer to 15eth daily. Its not the pools perse tried a few different ones pretty much the same outcome. The main issue is solo mining would probbaly net me 1-2 extra blocks a week Solo here (on genoil 1.1.7)with 1ghs. Trust me if you have a good internet solo is your friend;) BR 1 gig seems really low to solo mine .. . I'm happy with 1 block a day. Some days I get three some zero. It's all about what your comfortable with. I like the risk. I mean hell im in the crypto world after all. Risk is our thing right:). Anyway I don't sweat it when I go a week without a block. It does happen. Edit. Call me crazy but I'm running 34 Ths solo now. With the high risk of never seeing roi with s9 I decided hell with it I'll take my chances;) BR D57heinz |
As in nature, all is ebb and tide, all is wave motion, so it seems that in all branches of industry, alternating currents - electric wave motion - will have the sway. ~Nikola Tesla~
|
|
|
armyman
Newbie
Offline
Activity: 45
Merit: 0
|
|
September 15, 2016, 06:44:02 AM |
|
Hi guys,
today I am going to set up my first mining rig with 6 XFX RX480 8gb GPUs, and I would like to install Claymore's dual miner on it, so I was wondering, which one is more profitable atm?
ETH+DCR, ETH+SIA, or ETH+Lbry?
Of course the value of the tokens is widely different (token/USD), but what is better to mine considering block reward, block time, token value, etc?
I would like to store ETH, while using the other coins to trade, so which one of the three has got the highest trading value in your opinion?
PS: also what operative system would you suggest to run this miner? I was thinking about installing WIN10, because apparently is good to overclock the GPUs later on. Do you agree, or do you think there are better options basing on your experience?
Every help is deeply appreciated, thank you!
|
|
|
|
|
|
HardSign
|
|
September 15, 2016, 06:50:28 AM |
|
Edit. Call me crazy but I'm running 34 Ths solo now. With the high risk of never seeing roi with s9 I decided hell with it I'll take my chances;)
You can mine at PPS and buy a lottery ticket for mined funds. Chance will be _much_ higher |
|
|
|
|
|
HardSign
|
|
September 15, 2016, 06:57:03 AM |
|
today I am going to set up my first mining rig with 6 XFX RX480 8gb GPUs, and I would like to install Claymore's dual miner on it, so I was wondering, which one is more profitable atm?
ETH+DCR, ETH+SIA, or ETH+Lbry?
For me ETH+SIA is the most profitable. But it may vary in your case, you could check with your equipment. Win10 is OK, but you have to tune it ( disable telemetry, disable useless services) |
|
|
|
|
d57heinz
Legendary
Offline
Activity: 1453
Merit: 1011
Bitcoin Talks Bullshit Walks
|
|
September 15, 2016, 07:06:47 AM |
|
Edit. Call me crazy but I'm running 34 Ths solo now. With the high risk of never seeing roi with s9 I decided hell with it I'll take my chances;)
You can mine at PPS and buy a lottery ticket for mined funds. Chance will be _much_ higher Hehe sadly your prolly right  . I don't really count those machines in my calcs any more. it's really sad that more less that's what the machines have become well at least for me the small miner. Lottery machines with an added benefit of some heat for me for the winter. It's rather unfortunate tho one can't actually put an s9 into your home without ear plugs. So again another reason to buy more gpu's  . Best Regards d57heinz |
As in nature, all is ebb and tide, all is wave motion, so it seems that in all branches of industry, alternating currents - electric wave motion - will have the sway. ~Nikola Tesla~
|
|
|
qqqq
Legendary
Offline
Activity: 1596
Merit: 1011
|
|
September 15, 2016, 12:03:12 PM |
|
Claymore, can you confirm that 7.0 finds blocks ? Cause i got 1/0/1 and no block was accepted. I know that maybe orphan but anyway. In the past you have this issue!
Btw what is "number of incorrectly calculated shares" it's stale, orphan or what ? In 7.0 i got too much 3 for about 24 hours.
|
|
|
|
|
|
markus124
|
|
September 15, 2016, 01:03:20 PM |
|
today I am going to set up my first mining rig with 6 XFX RX480 8gb GPUs, and I would like to install Claymore's dual miner on it, so I was wondering, which one is more profitable atm?
ETH+DCR, ETH+SIA, or ETH+Lbry?
For me ETH+SIA is the most profitable. But it may vary in your case, you could check with your equipment. Win10 is OK, but you have to tune it ( disable telemetry, disable useless services) Eth + Sia is the most profitable for me now. You can use this and set the right parameters too. http://www.whattomine.com/ |
|
|
|
|
qqqq
Legendary
Offline
Activity: 1596
Merit: 1011
|
|
September 15, 2016, 01:59:20 PM |
|
Claymore, can you confirm that 7.0 finds blocks ? Cause i got 1/0/1 and no block was accepted. I know that maybe orphan but anyway. In the past you have this issue!
Btw what is "number of incorrectly calculated shares" it's stale, orphan or what ? In 7.0 i got too much 3 for about 24 hours.
Just saw in blockexplorer that block was accepted 10 hours ago, and sent on my exchange address 10 hours ago too. It seems Tx that was in the wait list. Cause last time i have sent Tx and it din't has any reaction about 10 min, i sent another one. I think this is it. So it's ok. |
|
|
|
|
adaseb
Legendary
Offline
Activity: 3878
Merit: 1735
|
|
September 15, 2016, 02:27:48 PM |
|
All my claymore rigs just restarted all at the same time, what gives?
|
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
September 15, 2016, 02:30:00 PM |
|
Claymore, can you confirm that 7.0 finds blocks ? Cause i got 1/0/1 and no block was accepted. I know that maybe orphan but anyway. In the past you have this issue!
Btw what is "number of incorrectly calculated shares" it's stale, orphan or what ? In 7.0 i got too much 3 for about 24 hours.
Just saw in blockexplorer that block was accepted 10 hours ago, and sent on my exchange address 10 hours ago too. It seems Tx that was in the wait list. Cause last time i have sent Tx and it din't has any reaction about 10 min, i sent another one. I think this is it. So it's ok. It must work because I did not change any network-related code. |
|
|
|
qqqq
Legendary
Offline
Activity: 1596
Merit: 1011
|
|
September 15, 2016, 02:41:30 PM |
|
Claymore, can you confirm that 7.0 finds blocks ? Cause i got 1/0/1 and no block was accepted. I know that maybe orphan but anyway. In the past you have this issue!
Btw what is "number of incorrectly calculated shares" it's stale, orphan or what ? In 7.0 i got too much 3 for about 24 hours.
Just saw in blockexplorer that block was accepted 10 hours ago, and sent on my exchange address 10 hours ago too. It seems Tx that was in the wait list. Cause last time i have sent Tx and it din't has any reaction about 10 min, i sent another one. I think this is it. So it's ok. It must work because I did not change any network-related code. Yeah, it's work. Just my fault. |
|
|
|
|
|
