Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[scryptr]

Hey, umm I am having problems, I have a GTX750ti, and I am only getting 0.5 Mh/s, furthermore my gou usage bounces from 100 to 0 constantly. Could someone please help me?

A GTX 750ti IS NOT SUITABLE FOR MINING ETHEREUM--

This is a known issue.  A GTX 750ti card is not compatible with any ETH miner, Claymore or otherwise.  At one time, when the DAG was much closer to 1GB in size, a 750ti could mine at about 8MH/s.  When the DAG grew larger, and pools for ETH mining began to go online, the 750ti proved incompatible for mining ETH.  This was over a year ago.

No programmer has found a solulution.  There were a few 4GB 750ti cards made, but I have never read a report on how well they could mine ETH.  A 750ti will mine Library Credits at 50MH/s, though.         --scryptr

[alevlaslo]

XMR and LBRY the best profit today, each of them get more than dual

[adaseb]

XMR is more profitable but not LBRY, at least for AMD cards.

[alevlaslo]

XMR is more profitable but not LBRY, at least for AMD cards.

i may sell for you special miner that get 180 mh at 290x and 252 at fury

50% of Wolf price

[fittsy]

I have 4 r9 280x speed falling anyone know why

Tahiti cards don't do well with the ETH.  I'm not sure why. I think it has to do with the increasing DAG file sizes but perhaps someone else smarter than me can say why.

You can always mine another dagger hashimoto coin instead and get better hashrates. (EXP for example.)

[adamvp]

I am tired of mining now...

Another problem has occured:

My CDM hangs, and if I try to kill it by Windows taskmgr it says me "Access denied" even if I turn taskmgr on as Administrator

[Mugtaiya]

I have 4 r9 280x speed falling anyone know why

Tahiti cards don't do well with the ETH.  I'm not sure why. I think it has to do with the increasing DAG file sizes but perhaps someone else smarter than me can say why.

You can always mine another dagger hashimoto coin instead and get better hashrates. (EXP for example.)

Tahiti card is the earlier generation of GCN, the memory usage is not efficient. The 380 or 390 is much better.

[citronick]

Hi guys - anyone has guide to create linux booting from USB thumbdrive, running claymore dual miner? thanks

There are two ways :

• LIVE CD booting from USB - use any Linux Live CD and e.g. YUMI for Windows
• Native Linux installed on USB - use any Linux and install to USB

+ install Claymore

I can create some, if interested.

that would be great....

but some good soul PM me to see this "simplemining.net" -- its full Linux on a stick running Claymore v6.3 and much more... interesting project. Finally ... I am free from Microsoft... me thinks :-)

[osnwt]

but some good soul PM me to see this "simplemining.net" -- its full Linux on a stick running Claymore v6.3 and much more... interesting project. Finally ... I am free from Microsoft... me thinks :-)

IIRC, it takes around 3% of your hashrate as a payment for the distribution. I may be wrong, or thing may be changed since I looked at that. Check for yourself.
Still, would be good to have a way to build such USB-based system from scratch. I am now doing own version to run fully from RAM with USB stick set to r/o after boot. But I am afraid I can't take money for free software, and am too lazy to write detailed manuals for free (this needs much more time than I can afford). I like some distributions, but I definitely want to build it myself, not use prepackaged one.

[fittsy]

that would be great....

but some good soul PM me to see this "simplemining.net" -- its full Linux on a stick running Claymore v6.3 and much more... interesting project. Finally ... I am free from Microsoft... me thinks :-)

You pay him a mining fee in addition to claymore mining fee.

NOT worth it.

[osnwt]

Actually, the difficulty to build such distros depends on the service you want to have. Say, some distros autodetect and configure network cards for you. All is fine when it works. But if something goes wrong you have to find what's wrong exactly. Instead I prefer to configure things by hand using vi. If things go wrong I know exactly where to find it. But then I am getting optimized light configuration to work with. Configure once, use forever.

[PontiacGTX]

GRS is dying. Do not add it to Claymore.

Based on the profitability chart I see , Groelst with 23MH/s and Eth at 18MH/s Groelst Coin is close to eth gains

but volume market cap is barely 2BTC

[citronick]

that would be great....

but some good soul PM me to see this "simplemining.net" -- its full Linux on a stick running Claymore v6.3 and much more... interesting project. Finally ... I am free from Microsoft... me thinks :-)

You pay him a mining fee in addition to claymore mining fee.

NOT worth it.

yup, i agree.

i think we should have a standard ubuntu image with all claymore stuff already prepackage, incl. AMD drivers etc, all we need to do is update the config file. simple without the bells and whistles.... any volunteers?

[fittsy]

GRS is dying. Do not add it to Claymore.

Based on the profitability chart I see , Groelst with 23MH/s and Eth at 18MH/s Groelst Coin is close to eth gains

but volume market cap is barely 2BTC

GRS is getting delisted from Polo on September 5th.

If it was a good coin it wouldn't be getting delisted.

ALSO, total MH of network is really really low. This makes it susceptible to 51% attacks.  We've been seeing 51% attacks on coins lately. You want to avoid coins with low hashrate like this one.

[carloshell]

Hey guys,

Is there any way to make EthMan accessible via an external network? I opened the port 8000 and 3333 just to give it a try and I was unsuccessful. I tried to search in this forum, but I couldn't find a clear answer about it.

It felt like it did make sense to open the port 8000 then type the external public ip:8000 on the browser. Didnt work

Thanks!!

[xeridea]

Hey guys,

Is there any way to make EthMan accessible via an external network? I opened the port 8000 and 3333 just to give it a try and I was unsuccessful. I tried to search in this forum, but I couldn't find a clear answer about it.

It felt like it did make sense to open the port 8000 then type the external public ip:8000 on the browser. Didnt work

Thanks!!

Confirm that port 8000 is open....
https://www.grc.com/x/ne.dll?rh1dkyd2

[AcidMiner]

Hello Claymore,

can you add Bikercoin to your GPU and CPU Mining software please?
Bikercoin is a Cryptonote based coin, so you should add the support to your Cryptonote mining software. But it would be very nice if you can add Bikercoin support to ETH/DCR/SIA Miner too.

I'm the owner of an Bikercoin pool.
You can reach my Pool at: http://bikercoin.acidminer.org

You can contact me here by answer my pm.
kind regards

[carloshell]

Hey guys,

Is there any way to make EthMan accessible via an external network? I opened the port 8000 and 3333 just to give it a try and I was unsuccessful. I tried to search in this forum, but I couldn't find a clear answer about it.

It felt like it did make sense to open the port 8000 then type the external public ip:8000 on the browser. Didnt work

Thanks!!

Confirm that port 8000 is open....
https://www.grc.com/x/ne.dll?rh1dkyd2

Hey,

Thank you for replying!!

I do access all my rigs through remote desktop via virtual servers setup, opening ports isn't really much of a big deal, but I did double check on http://www.canyouseeme.org/ and the ports are open.

Any ideas?

[xeridea]

Hey guys,

Is there any way to make EthMan accessible via an external network? I opened the port 8000 and 3333 just to give it a try and I was unsuccessful. I tried to search in this forum, but I couldn't find a clear answer about it.

It felt like it did make sense to open the port 8000 then type the external public ip:8000 on the browser. Didnt work

Thanks!!

Confirm that port 8000 is open....
https://www.grc.com/x/ne.dll?rh1dkyd2

Hey,

Thank you for replying!!

I do access all my rigs through remote desktop via virtual servers setup, opening ports isn't really much of a big deal, but I did double check on http://www.canyouseeme.org/ and the ports are open.

Any ideas?

Make sure port 8000 is going to that specific computer, and check if anything else is listening on that port.

http://stackoverflow.com/questions/48198/how-can-you-find-out-which-process-is-listening-on-a-port-on-windows

[carloshell]

Hey guys,

Is there any way to make EthMan accessible via an external network? I opened the port 8000 and 3333 just to give it a try and I was unsuccessful. I tried to search in this forum, but I couldn't find a clear answer about it.

It felt like it did make sense to open the port 8000 then type the external public ip:8000 on the browser. Didnt work

Thanks!!

Confirm that port 8000 is open....
https://www.grc.com/x/ne.dll?rh1dkyd2

Hey,

Thank you for replying!!

I do access all my rigs through remote desktop via virtual servers setup, opening ports isn't really much of a big deal, but I did double check on http://www.canyouseeme.org/ and the ports are open.

Any ideas?

Make sure port 8000 is going to that specific computer, and check if anything else is listening on that port.

http://stackoverflow.com/questions/48198/how-can-you-find-out-which-process-is-listening-on-a-port-on-windows

I checked and there was nothing else listening on that port on the current machine runnning EthMan. Just to be 100% sure I just changed the port to 64000.
I can confirm the new port is open externally, confirm it's working on the lan and confirm it's not working with the external IP:64000

Maybe I am missing something? -_-

Thanks man