Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[scryptr]

SOMETHING NOTABLE ABOUT NVIDIA CARDS--

Today I tried increasing the intensity for the secondary coin on my EVGA GTX CLASSIFIED 980ti card.  I was able to more than double the hashrate for SiaCoin (SC) from 210MH/s to 540MH/s by increasing the "-dcri" intensity value from default to "-dcri 75".  The card heated up from 77 deg F to 83 deg F, but the Ethereum (ETH) hashrate remained close to 22MH/s.  The temperature of 83 deg F is the default target for this 980ti card.

The EVGA CLASSIFIED 980ti does not hash ETH much faster than a GTX 970, but it has greater compute power.  This difference is shown in the large increase in hashrate for the secondary coin (SC) by just increasing the "dcri" intensity value.  There is room for experimentation here.       --scryptr.

[PovertyByte]

I just tried ETH+LBRY on Windows 7

372.54 driver for Pascal, GTX 1070

LBC is reporting 27MH/s

Anything I do for dcri has little effect on total mining profits. The rise in LBC hash rate decreases the ETH hash rates at a very well scaled rate.

It is more profitable for me to single mine LBRY


Is this normal?

[rednoW]

SOMETHING NOTABLE ABOUT NVIDIA CARDS--

Today I tried increasing the intensity for the secondary coin on my EVGA GTX CLASSIFIED 980ti card.  I was able to more than double the hashrate for SiaCoin (SC) from 210MH/s to 540MH/s by increasing the "-dcri" intensity value from default to "-dcri 75".  The card heated up from 77 deg F to 83 deg F, but the Ethereum (ETH) hashrate remained close to 22MH/s.  The temperature of 83 deg F is the default target for this 980ti card.

The EVGA CLASSIFIED 980ti does not hash ETH much faster than a GTX 970, but it has greater compute power.  This difference is shown in the large increase in hashrate for the secondary coin (SC) by just increasing the "dcri" intensity value.  There is room for experimentation here.       --scryptr.

you better sell this hungry monster and buy 1070 or rx480. You'll have 30 eth and 450sc easy with only 150-200 watts (depend on your downvolting and optimization skills)

[scryptr]

SOMETHING NOTABLE ABOUT NVIDIA CARDS--

Today I tried increasing the intensity for the secondary coin on my EVGA GTX CLASSIFIED 980ti card.  I was able to more than double the hashrate for SiaCoin (SC) from 210MH/s to 540MH/s by increasing the "-dcri" intensity value from default to "-dcri 75".  The card heated up from 77 deg F to 83 deg F, but the Ethereum (ETH) hashrate remained close to 22MH/s.  The temperature of 83 deg F is the default target for this 980ti card.

The EVGA CLASSIFIED 980ti does not hash ETH much faster than a GTX 970, but it has greater compute power.  This difference is shown in the large increase in hashrate for the secondary coin (SC) by just increasing the "dcri" intensity value.  There is room for experimentation here.       --scryptr.

you better sell this hungry monster and buy 1070 or rx480. You'll have 30 eth and 450sc easy with only 150-200 watts (depend on your downvolting and optimization skills)

NOT BRAGGING ABOUT MY CARD--

Thanks for the advice, but I am posting a note regarding the relative hashing rate increase on the secondary coin (in my case, SiaCoin [SC]) on nVidia cards.  The compute units, CUDA cores, kick in on the intensity increase (dcri = 75).  The secondary coin is "compute intensive", rather than "memory intensive", as is ETH, or XMR for that matter.

This will be true for the new nVidia  10XX series as well.  When the rebates kikck in, I might buy the new stuff.  Again, the thing here is that a top-notch 980ti can't hash ETH much faster than a 970, but if you apply the computing unts, the secondary coin hash rate really increases.  My EVGA GTX 960 SC cards are now hashing at 10.5MH/s ETH / 250MH/s SC, where at the default setting (dcri = 30) they were hashing 10.5MH/s ETH / 120MH/s SC.  The intensity setting is now "-dcri 75" on both my Win 7 980ti and my Linux 5X 960 rig.  The rig gets 1.25GH/s hash for SC.

If the cards stay stable overnight, I'll experiment some more.  And, after I sell my 280X cards and replace them with RX 470 cards, I'll worry about my nVidia equipment.  Whenever I increase the intensity on the 280X cards, they overheat.  Too much for one weekend.       --scryptr

[citronick]

Is there a command in Claymores miner that allows you to restart the miner if a card drops below a certain hashrate?

I noticed that I was running a 29 mhs low power mod and after 1 hour GPU 1 dropped to 25. Restarted the miner and both GPUs are hashing at 29 MHs with no issues for 4 hours.

Thanks

Had the same problem -- upgraded to Crimson 16.9.1 -- no problems now!

[wll1rah]

@claymore

is it possible to disable temp and fan monitoring for the NV cards?

[Claymore]

@claymore

is it possible to disable temp and fan monitoring for the NV cards?

"-tt 0" disables it.

[chschlumpf]

Hello

I built a rig with 6x XFX RX480 GTR
Has any one settings for 6x 27MH/s and low Power consumption? I get 6x 27MH/s but by 1100 Watt at the wall. Goal is around 900 Watt
Thank you very much.

[Joemid]

Hello

I built a rig with 6x XFX RX480 GTR
Has any one settings for 6x 27MH/s and low Power consumption? I get 6x 27MH/s but by 1100 Watt at the wall. Goal is around 900 Watt
Thank you very much.

How much consumed each rx480?

It give 27 mhs stock or oc?

[uncaer9]

anyone sugest me, the best setting for dual mining ?
my friend sugest me to add this setting but i don't know for what, -ethi 1200 ? -ethi 1800 ?

[Velgelm]

read file readmi.txt this file contain examples and config parameters with explanation

[Visin]

Love to watch this thread.
Makes me want to get into mining again with all the innovative technology that has arisen since I was into it in early 2014 this thread is a very valuable stream of information.  

[d57heinz]

Could you please release a miner that will only mine solo with the eth proxy for a reasonable upfront cost.
d57heinz

To all:
Please don't ask me to create some private miner, sell some customized version of the miner, etc - I don't do such things.
Also please don't try to hire me to help with some mining farm, to create some miner for some coin, etc - I just don't have time for it.

Thanks for getting back to me.. I appreciate it.

Mine on

[d57heinz]

Hello

I built a rig with 6x XFX RX480 GTR
Has any one settings for 6x 27MH/s and low Power consumption? I get 6x 27MH/s but by 1100 Watt at the wall. Goal is around 900 Watt
Thank you very much.

try lowering your pow limit to -25%  drops mine from 110 gpuz to 82.  might get you where you want to be.

those of you discussing the 1x - 3x splitters they dont work. I couldnt get any card to post in them.  or recognize in win 10..   even my 7 slot msi will only do 6 gpu for some reason. when i put it in the 2nd pcie 1x next to the middle 16x slot it wont post.  may have to look into it again.  (slot pci_e4)

Eliovp. Thanks for the advice ill check into wolf0 miner.  

BR

[elmanager]

Hello

I built a rig with 6x XFX RX480 GTR
Has any one settings for 6x 27MH/s and low Power consumption? I get 6x 27MH/s but by 1100 Watt at the wall. Goal is around 900 Watt
Thank you very much.

try lowering your pow limit to -25%  drops mine from 110 gpuz to 82.  might get you where you want to be.

those of you discussing the 1x - 3x splitters they dont work. I couldnt get any card to post in them.  or recognize in win 10..   even my 7 slot msi will only do 6 gpu for some reason. when i put it in the 2nd pcie 1x next to the middle 16x slot it wont post.  may have to look into it again.  (slot pci_e4)

Eliovp. Thanks for the advice ill check into wolf0 miner.  

BR

       Yeap, mostly the problems comes from the in front of the keyboard. Keep research, the right settings are out there!

[peoples]

@Claymore
Do you have this one on your roadmap ? Maybe you have an information for target version ?
Thanks

I think I will add it in 1-2 weeks.

perfect. Thanks

[xeridea]

Hello

I built a rig with 6x XFX RX480 GTR
Has any one settings for 6x 27MH/s and low Power consumption? I get 6x 27MH/s but by 1100 Watt at the wall. Goal is around 900 Watt
Thank you very much.

Undervolt to ~960-1020mv, depends on ASIC quality, and clocks.  Even with OC of 1340MHz you can drop to at least 1050mv.  You can easily save 20-30w per card by doing this.  Dual mining you probably won't get under 900w, maybe eth only, but then you lose profit.

[husn]

what about this ?
1 sophier RX 480 :
AVG 91.3 watt
fan speed 74%
GPU temp 80 Celsius
over 29 MH/s

[xxcsu]

What about that ? 

[Altcoining]

Atikmpag.sys BSOD's are quite common with the RX 480's on Catalyst 16.8.3 on Win 7.