adaseb
Legendary
Offline
Activity: 3836
Merit: 1723
Up to 300% + 200 FS deposit bonuses
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 21, 2017, 09:26:47 AM |
|
what are the advantages of PASL that makes it better then PASC? Well for a miners point of view, currently its more profitable to mine. For a investors point of view, we have some types of technology that PASC doesn't. It would be better to see our thread https://bitcointalk.org/index.php?topic=1773026
|
|
|
|
thespycry
Newbie
Offline
Activity: 42
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 21, 2017, 09:27:28 AM |
|
Is it possible, that with a Sapphire RX 480 Nitro+ OC 8GB (1342 MHz) I do not get more than 28.1 MH/s ? And I have uploaded a BIOS with adjusted timing straps (2000) If I raise the memory from 2000 MHz to some higher values, it has no effect. The miner is showing the same values: 28.1
|
|
|
|
AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 21, 2017, 11:06:22 AM |
|
Is it possible, that with a Sapphire RX 480 Nitro+ OC 8GB (1342 MHz) I do not get more than 28.1 MH/s ? And I have uploaded a BIOS with adjusted timing straps (2000) If I raise the memory from 2000 MHz to some higher values, it has no effect. The miner is showing the same values: 28.1
Look for GPU mining treads to learn how to do it. Lower gpu clock ( i.e. 1131) and raise voltage as needed . than memory clock will function. And temp has limiting factor.
|
|
|
|
skoCe
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 21, 2017, 01:04:28 PM |
|
Hello there, i made my first rig, but i have some problems with it. Every 6-7-8 hours it stops working, pool sends me a mail that my rig is not working, i connect through teamviewer and just press S to show what is going on, and miner restarts and continues normally. This is end of log from claymore miner, and every time i had this message Miner thread hangs, need to restart miner! I tried different versions of claymore but it just stops working after a while 08:32:00:891 1208 Miner thread hangs, need to restart miner! 08:32:00:895 8d8 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1327, Rejected: 0, Time: 08:49 08:32:00:931 8d8 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s 08:32:00:882 8b8 08:32:00:967 8b8 GPU #0: Ellesmere, 8192 MB available, 36 compute units 08:32:00:972 8b8 GPU #1: Ellesmere, 8192 MB available, 36 compute units 08:32:00:977 8b8 GPU #2: Ellesmere, 8192 MB available, 36 compute units 08:32:00:981 8b8 GPU #3: Ellesmere, 8192 MB available, 36 compute units 08:32:00:987 8b8 GPU #4: Ellesmere, 8192 MB available, 36 compute units 08:32:00:991 8b8 GPU #5: Ellesmere, 8192 MB available, 36 compute units 08:32:00:997 8b8 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1327, Rejected: 0, Time: 08:49 08:32:01:004 8b8 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s 08:32:01:009 8b8 Incorrect ETH shares: none 08:32:01:014 8b8 Pool switches: ETH - 0, DCR - 0 08:32:01:019 8b8 Current ETH share target: 0x0000000112e0be82 (diff: 4000MH), epoch #113 08:32:01:086 8b8 GPU0 t=26C fan=52%, GPU1 t=25C fan=52%, GPU2 t=29C fan=53%, GPU3 t=28C fan=53%, GPU4 t=28C fan=53%, GPU5 t=25C fan=53% 08:32:01:090 8b8 08:32:01:961 1208 Restarting OK, exit...
|
|
|
|
noviceminer
Newbie
Offline
Activity: 72
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 21, 2017, 01:44:26 PM |
|
@luigbren Try using Nicehash's GUI miner or Genoil's miner for ethereum and see if it works. Remember nicehash's ETH only miner uses 2% dev fee.
|
|
|
|
GarretUA
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 21, 2017, 01:45:26 PM |
|
Hello there, i made my first rig, but i have some problems with it. Every 6-7-8 hours it stops working, pool sends me a mail that my rig is not working, i connect through teamviewer and just press S to show what is going on, and miner restarts and continues normally.
This is end of log from claymore miner, and every time i had this message Miner thread hangs, need to restart miner!
I tried different versions of claymore but it just stops working after a while Same here bro ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
thespycry
Newbie
Offline
Activity: 42
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 21, 2017, 01:49:22 PM |
|
Is it possible, that with a Sapphire RX 480 Nitro+ OC 8GB (1342 MHz) I do not get more than 28.1 MH/s ? And I have uploaded a BIOS with adjusted timing straps (2000) If I raise the memory from 2000 MHz to some higher values, it has no effect. The miner is showing the same values: 28.1
Look for GPU mining treads to learn how to do it. Lower gpu clock ( i.e. 1131) and raise voltage as needed . than memory clock will function. And temp has limiting factor. Yes i did look at all the Hw forums, but it was working for everyone. Look.. it applies to first gpu only. The others are lowered from 28.1 to 27.8 http://imgur.com/g33Vn3F
|
|
|
|
noviceminer
Newbie
Offline
Activity: 72
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 21, 2017, 01:51:33 PM |
|
Hello there, i made my first rig, but i have some problems with it. Every 6-7-8 hours it stops working, pool sends me a mail that my rig is not working, i connect through teamviewer and just press S to show what is going on, and miner restarts and continues normally. This is end of log from claymore miner, and every time i had this message Miner thread hangs, need to restart miner! I tried different versions of claymore but it just stops working after a while 08:32:00:891 1208 Miner thread hangs, need to restart miner! 08:32:00:895 8d8 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1327, Rejected: 0, Time: 08:49 08:32:00:931 8d8 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s 08:32:00:882 8b8 08:32:00:967 8b8 GPU #0: Ellesmere, 8192 MB available, 36 compute units 08:32:00:972 8b8 GPU #1: Ellesmere, 8192 MB available, 36 compute units 08:32:00:977 8b8 GPU #2: Ellesmere, 8192 MB available, 36 compute units 08:32:00:981 8b8 GPU #3: Ellesmere, 8192 MB available, 36 compute units 08:32:00:987 8b8 GPU #4: Ellesmere, 8192 MB available, 36 compute units 08:32:00:991 8b8 GPU #5: Ellesmere, 8192 MB available, 36 compute units 08:32:00:997 8b8 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1327, Rejected: 0, Time: 08:49 08:32:01:004 8b8 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s 08:32:01:009 8b8 Incorrect ETH shares: none 08:32:01:014 8b8 Pool switches: ETH - 0, DCR - 0 08:32:01:019 8b8 Current ETH share target: 0x0000000112e0be82 (diff: 4000MH), epoch #113 08:32:01:086 8b8 GPU0 t=26C fan=52%, GPU1 t=25C fan=52%, GPU2 t=29C fan=53%, GPU3 t=28C fan=53%, GPU4 t=28C fan=53%, GPU5 t=25C fan=53% 08:32:01:090 8b8 08:32:01:961 1208 Restarting OK, exit...
Have you tried to raise priority of EthDcrMiner64 to HIGH ?
|
|
|
|
skoCe
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 21, 2017, 02:28:07 PM |
|
Hello there, i made my first rig, but i have some problems with it. Every 6-7-8 hours it stops working, pool sends me a mail that my rig is not working, i connect through teamviewer and just press S to show what is going on, and miner restarts and continues normally. This is end of log from claymore miner, and every time i had this message Miner thread hangs, need to restart miner! I tried different versions of claymore but it just stops working after a while 08:32:00:891 1208 Miner thread hangs, need to restart miner! 08:32:00:895 8d8 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1327, Rejected: 0, Time: 08:49 08:32:00:931 8d8 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s 08:32:00:882 8b8 08:32:00:967 8b8 GPU #0: Ellesmere, 8192 MB available, 36 compute units 08:32:00:972 8b8 GPU #1: Ellesmere, 8192 MB available, 36 compute units 08:32:00:977 8b8 GPU #2: Ellesmere, 8192 MB available, 36 compute units 08:32:00:981 8b8 GPU #3: Ellesmere, 8192 MB available, 36 compute units 08:32:00:987 8b8 GPU #4: Ellesmere, 8192 MB available, 36 compute units 08:32:00:991 8b8 GPU #5: Ellesmere, 8192 MB available, 36 compute units 08:32:00:997 8b8 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1327, Rejected: 0, Time: 08:49 08:32:01:004 8b8 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s 08:32:01:009 8b8 Incorrect ETH shares: none 08:32:01:014 8b8 Pool switches: ETH - 0, DCR - 0 08:32:01:019 8b8 Current ETH share target: 0x0000000112e0be82 (diff: 4000MH), epoch #113 08:32:01:086 8b8 GPU0 t=26C fan=52%, GPU1 t=25C fan=52%, GPU2 t=29C fan=53%, GPU3 t=28C fan=53%, GPU4 t=28C fan=53%, GPU5 t=25C fan=53% 08:32:01:090 8b8 08:32:01:961 1208 Restarting OK, exit...
Have you tried to raise priority of EthDcrMiner64 to HIGH ? How do i do that? EDIT: I figured it how, in task manager right click ther priority then high, will try with this and will report ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
|
sigb0y
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 79
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 21, 2017, 03:19:15 PM |
|
Without modding around 25MHs.
|
keep mining or die trying
|
|
|
brunodamaso
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 21, 2017, 03:47:01 PM |
|
Good day.
There is a way to change coin without stopping the mine of eth, example is mining in dcr and with a key switch to sc.
|
|
|
|
NetworkBS
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 21, 2017, 03:50:59 PM |
|
Without modding around 25MHs. And will go up to 29 mh/s modding i'm right?
|
|
|
|
Raja_MBZ
Legendary
Offline
Activity: 1862
Merit: 1505
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 21, 2017, 04:39:32 PM |
|
Without modding around 25MHs. And will go up to 29 mh/s modding i'm right? With Claymore miner's own over-clocking features, it is able to make it over 27.5 MH/s for me. However, I think if you go cruel on it and over-clock it too much, it'd be able to pass 29 MH/s.
|
|
|
|
LJLT
Newbie
Offline
Activity: 48
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 21, 2017, 04:49:31 PM |
|
Without modding around 25MHs. And will go up to 29 mh/s modding i'm right? With Claymore miner's own over-clocking features, it is able to make it over 27.5 MH/s for me. However, I think if you go cruel on it and over-clock it too much, it'd be able to pass 29 MH/s. Hi @Raja_MBZ how you overclock using claymore?
|
|
|
|
EastSound
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 21, 2017, 06:26:31 PM |
|
Without modding around 25MHs. And will go up to 29 mh/s modding i'm right? With Claymore miner's own over-clocking features, it is able to make it over 27.5 MH/s for me. However, I think if you go cruel on it and over-clock it too much, it'd be able to pass 29 MH/s. Hi @Raja_MBZ how you overclock using claymore? You can use these commands. -cclock set target GPU core clock speed, in MHz. If not specified or zero, miner will not change current clock speed. You can also specify values for every card, for example "-cclock 1000,1050,1100,0". Unfortunately, AMD blocked underclocking for some reason, you can overclock only. Note: for NVIDIA cards this option is not supported. -mclock set target GPU memory clock speed, in MHz. If not specified or zero, miner will not change current clock speed. You can also specify values for every card, for example "-mclock 1200,1250,1200,0". Unfortunately, AMD blocked underclocking for some reason, you can overclock only. Note: for NVIDIA cards this option is not supported. -powlim set power limit, from -50 to 50. If not specified, miner will not change power limit. You can also specify values for every card, for example "-powlim 20,-20,0,10". Note: for NVIDIA cards this option is not supported. -cvddc set target GPU core voltage, multiplied by 1000. For example, "-cvddc 1050" means 1.05V. You can also specify values for every card, for example "-cvddc 900,950,1000,970". Supports latest AMD 4xx cards only in Windows. Note: for NVIDIA cards this option is not supported.
|
|
|
|
skoCe
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 21, 2017, 07:19:00 PM |
|
Hello there, i made my first rig, but i have some problems with it. Every 6-7-8 hours it stops working, pool sends me a mail that my rig is not working, i connect through teamviewer and just press S to show what is going on, and miner restarts and continues normally. This is end of log from claymore miner, and every time i had this message Miner thread hangs, need to restart miner! I tried different versions of claymore but it just stops working after a while 08:32:00:891 1208 Miner thread hangs, need to restart miner! 08:32:00:895 8d8 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1327, Rejected: 0, Time: 08:49 08:32:00:931 8d8 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s 08:32:00:882 8b8 08:32:00:967 8b8 GPU #0: Ellesmere, 8192 MB available, 36 compute units 08:32:00:972 8b8 GPU #1: Ellesmere, 8192 MB available, 36 compute units 08:32:00:977 8b8 GPU #2: Ellesmere, 8192 MB available, 36 compute units 08:32:00:981 8b8 GPU #3: Ellesmere, 8192 MB available, 36 compute units 08:32:00:987 8b8 GPU #4: Ellesmere, 8192 MB available, 36 compute units 08:32:00:991 8b8 GPU #5: Ellesmere, 8192 MB available, 36 compute units 08:32:00:997 8b8 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1327, Rejected: 0, Time: 08:49 08:32:01:004 8b8 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s 08:32:01:009 8b8 Incorrect ETH shares: none 08:32:01:014 8b8 Pool switches: ETH - 0, DCR - 0 08:32:01:019 8b8 Current ETH share target: 0x0000000112e0be82 (diff: 4000MH), epoch #113 08:32:01:086 8b8 GPU0 t=26C fan=52%, GPU1 t=25C fan=52%, GPU2 t=29C fan=53%, GPU3 t=28C fan=53%, GPU4 t=28C fan=53%, GPU5 t=25C fan=53% 08:32:01:090 8b8 08:32:01:961 1208 Restarting OK, exit...
Have you tried to raise priority of EthDcrMiner64 to HIGH ? I did this, but miner stopped again
|
|
|
|
|
Havane
Jr. Member
Offline
Activity: 76
Merit: 3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 22, 2017, 10:18:18 AM Last edit: March 22, 2017, 12:59:38 PM by Havane |
|
Any idea on how to fix this keeps on happening on 480 cards
WATCHDOG: GPU 1 hangs in OpenCL call, exit WATCHDOG: GPU 1 hangs in OpenCL call, exit Restarting OK, exit... crashes and have to restart system as claymore wont exit or close
This happened when I was dual mining. I ended up having to restore the BIOS on a couple of cards back to the original. They couldn't handle the extra stress from dual mining with the modified BIOS. Try ETH + PASC, it's working quite nice... with an intensity of -dcri 15 Which pascal pool do you suggest ? I tried nanopool & suprnova
|
|
|
|
derselben
Newbie
Offline
Activity: 22
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 22, 2017, 02:20:48 PM |
|
12:30:30:451 141c socket was closed remotely 12:30:30:451 141c ETH: Connection lost, retry in 5 sec... What does it mean? -mport is disabled Thanks!
|
|
|
|
|