Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[lemmyK]

ETH: Stratum - Connected (zec-eu1.dwarfpool.com:3333)
21:51:07:061   7d4   got 150 bytes
21:51:07:069   7d4   buf: {"error": [-3, "Method name parsing failed. You *must* use format <service name>.<method name>, e.g. 'example.ping'", null], "id": 2, "result": null}

21:51:07:076   7d4   parse packet: 130
21:51:07:083   7d4   ETH: Authorization failed
: {"error":[-3,"Methodnameparsingfailed.You*must*useformat<servicename>.<methodname>,e.g.'example.ping'",null],"id":2,"result":null}
21:51:07:091   7d4   buf was cleared
21:51:07:109   7d4   Stratum - reading socket failed 10038, disconnect
21:51:07:116   7d4   ETH: Job timeout, disconnect, retry in 20 sec...

[REDMOK]

Can someone help? I am getting the following error message

ETH: Share rejected!
ETH: Job timeout, disconnect, retry in 20 sec...


I am using this as an input

Code:

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal ****.myworker -epsw x -di 0 -allpools 1

Code:

╔════════════════════════════════════════════════════════════════╗
║      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v8.0      ║
╚════════════════════════════════════════════════════════════════╝

Total cards: 1
ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444
ETH: Stratum - Connected (us1.ethermine.org:4444)
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management is enabled on port 3333

ETH: Share rejected!
ETH: Job timeout, disconnect, retry in 20 sec...

[manotroll]

A 480 gets what 25 mh/s?

Mine modded ROM gives 29MHs per RX 480 8Gb Nitro+ card

32MHs probably very intense from point of view power consumption and heat?

Actually, no. I can do above 30 with a REAL low undervolt, 33MH/s is about max it goes.

Could share the parameters and consumption?

900W with 5 GPUs, all above or around 30MH/s (one at 33MH/s.)

Can you share bios mod or file settings?

Of course not. Took a while of working with the timings to get them hashing that well.

Share for a contribution? Would be happy to send something your way for your efforts.

Could you report the consumption of gpu-z on a board?
With 100W with peaks of 31MH / S not costly

[isma]

does this version works with nvidia GTX 660 2GB?

[manotroll]

A 480 gets what 25 mh/s?

Mine modded ROM gives 29MHs per RX 480 8Gb Nitro+ card

32MHs probably very intense from point of view power consumption and heat?

Actually, no. I can do above 30 with a REAL low undervolt, 33MH/s is about max it goes.

Could share the parameters and consumption?

900W with 5 GPUs, all above or around 30MH/s (one at 33MH/s.)

Can you share bios mod or file settings?

Of course not. Took a while of working with the timings to get them hashing that well.

Share for a contribution? Would be happy to send something your way for your efforts.

Could you report the consumption of gpu-z on a board?
With 100W with peaks of 31MH / S not costly

I run linux, so no, but I can get totals from the wall later.

Thank you, it's already a reference.

https://forum.ethereum.org/discussion/comment/69219#Comment_69219

[Red55555]

Why i have the same hashrate for ethereum in single mining mode and dual mining mode Please help me (i have 7990 and two 7950 and the overall hashrate is about 50mh/s in mode 1 and in mode 0)

Are You complaining or what? If You really want to slow down with ETH speed try mining LBRY as second coin. Or increase -dcri to insane high values like 80 or 90.

No i just figured i had done something wrong since when you don´t mine a second coin, the hashrate should go up instead of staying the same? I´ll try -dcri. thanks for the tip

[Xardas2014]

Why i have the same hashrate for ethereum in single mining mode and dual mining mode Please help me (i have 7990 and two 7950 and the overall hashrate is about 50mh/s in mode 1 and in mode 0)

Are You complaining or what? If You really want to slow down with ETH speed try mining LBRY as second coin. Or increase -dcri to insane high values like 80 or 90.

No i just figured i had done something wrong since when you don´t mine a second coin, the hashrate should go up instead of staying the same? I´ll try -dcri. thanks for the tip

Not really. Claymore's miners are coded to mine a second coin that doesn't slow down the first coin. Each algo put certain demands on your vid card while leaving some of the cards resources unused. Claymore figured out how to implement dual mining so that the second coin is using the unused resources.......so your ETH speed isn't adversely affected.

[Red55555]

Why i have the same hashrate for ethereum in single mining mode and dual mining mode Please help me (i have 7990 and two 7950 and the overall hashrate is about 50mh/s in mode 1 and in mode 0)

Are You complaining or what? If You really want to slow down with ETH speed try mining LBRY as second coin. Or increase -dcri to insane high values like 80 or 90.

No i just figured i had done something wrong since when you don´t mine a second coin, the hashrate should go up instead of staying the same? I´ll try -dcri. thanks for the tip

Not really. Claymore's miners are coded to mine a second coin that doesn't slow down the first coin. Each algo put certain demands on your vid card while leaving some of the cards resources unused. Claymore figured out how to implement dual mining so that the second coin is using the unused resources.......so your ETH speed isn't adversely affected.

Wow. claymore is the man. why he doesn´t do the same on zcash miner ? Thanks for the clarification dude. Gotta love this community.

[AriesIV10]

ETH at 43.21 right now...Loving it!

To the Moon!

[64dimensions]

Question:

When dual mining, does the reported ETH hash rate track at all with the hash rate displayed by the pool?

I'm on the side of trusting Claymore more that trusting any pool.

[Westfiled]

The memory leak must have to do with PAS before I started to mine PAS I did not have the issue but at 13GB memory of usage when I have 16GB memory the miner kept mining but would not actually send out the hash data.  At that point I had to restart it. So probably in the PAS routine.

Glad to hear a new update will be released though soon.

Ask if someone has same issue, I don't see any memory leaks in ETH+Pascal mode.

I have 2 rigs mining ETH + PASC and have no issue with them... One of it has 400+ hours since it started mining, that's more than 2 weeks without restarting...

What are the speed?

[Claymore]

But I mean when the pool disconnects me, in many occasions it sends Many invalid shared and disconnect me and reconnect to the seconds, here I leave an example in the log

Bug confirmed, miner ignores "-retrydelay" option when it disconnects due to pool errors. I will fix it in next update.

[pikos]

Strange fact, i have 2xFury + 1xRX480
using dual mining ETH + PASC  1 get 90MHs on ETH , Using ETH only I get 80MHs is this a calculation bug ?

[Intristing]

Strange fact, i have 2xFury + 1xRX480
using dual mining ETH + PASC  1 get 90MHs on ETH , Using ETH only I get 80MHs is this a calculation bug ?

What is the PASC speed?

[dolby]

I have a problem with a new rig 5 gpu (470 8gb nitro modded) two gpu start at full speed 29.2 and down in five minutes to 15 and 20 and the same happens in gpu-z memory controller load from 100 to 65.

What is the problem, someone can help me?

[naeme18720]

WOOOOOOOOOOOOOOOOOW

WOOOOOOOOOOOOOOOOOW

1 ETH = 0.05 BTC
1 DCR = 0.007 BTC

[Toxic_Cat]

Can anyone help? I have strange error during starting Claymore on 3xRX 470
Windows 10, Memory 16 GB, SSD

Error converting from IL text 2 IL Binary.Error converting from IL text 2 IL Binary for k02g.
Frontend phase failed compilation.
Error: Creating kernel k02g failed!

[overcon]

Hey guys, how can I get faster speeds with this miner and my two Nvidia GeForce 980 GTX cards? I install the latest CUDA drivers and this just seems slow, I mean really slow. I found if I install just the GeForce drivers, then the miner doesn't work because it doesn't have CUDA, I install the driver with CUDA and the hash rate drops from 40 to 3 Mh/s. What can I do to get a decent speed?


17:40:53:449   3078   NVIDIA Cards available: 2
17:40:53:450   3078   CUDA Driver Version/Runtime Version: 8.0/8.0
17:40:53:451   3078   GPU #0: GeForce GTX 980, 4096 MB available, 16 compute units, capability: 5.2

17:40:53:452   3078   GPU #1: GeForce GTX 980, 4096 MB available, 16 compute units, capability: 5.2

17:40:53:453   3078   Total cards: 2
17:41:02:908   3078   No AMD cards in the list, ADL library will not be used.
17:41:02:910   3078   NVML version: 8.376.51
17:41:03:221   1428   ETH: Stratum - connecting to 'eth-us.dwarfpool.com' <198.245.50.164> port 8008
17:41:03:311   3078   DUAL MINING MODE ENABLED: ETHEREUM+PASCAL

17:41:22:375   1428   ETH - Total Speed: 7.092 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
17:41:22:376   1428   ETH: GPU0 3.499 Mh/s, GPU1 3.586 Mh/s
17:41:22:376   1428    PASC - Total Speed: 118.196 Mh/s, Total Shares: 0, Rejected: 0
17:41:22:377   1428    PASC: GPU0 58.312 Mh/s, GPU1 59.771 Mh/s


ETH: 03/24/17-17:50:55 - New job from eth-us.dwarfpool.com:8008
ETH - Total Speed: 7.087 Mh/s, Total Shares: 3, Rejected: 0, Time: 00:09
ETH: GPU0 3.505 Mh/s, GPU1 3.582 Mh/s
 PASC - Total Speed: 118.121 Mh/s, Total Shares: 4, Rejected: 0
 PASC: GPU0 58.415 Mh/s, GPU1 59.706 Mh/s
GPU0 t=66C fan=15%, GPU1 t=73C fan=31%


SYSTEM SPECIFICATIONS:

Operating System: Windows 10 Pro 64-bit (10.0, Build 14393)
Language: English (Regional Setting: English)
System Manufacturer: Gigabyte Technology Co., Ltd.
BIOS: F5f
Processor: Intel(R) Core(TM) i7-6900K CPU @ 3.20GHz (16 CPUs), ~3.2GHz
Memory: 131072MB RAM
Available OS Memory: 130906MB RAM
Page File: 12348MB used, 138013MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 12
Miracast: Available, with HDCP


---------------
Display Devices
---------------
Card name: NVIDIA GeForce GTX 980
Manufacturer: NVIDIA
Chip type: GeForce GTX 980
DAC type: Integrated RAMDAC
Device Type: Full Device
Device Key: Enum\PCI\VEN_10DE&DEV_13C0&SUBSYS_29833842&REV_A1
Device Status: 0180200A [DN_DRIVER_LOADED|DN_STARTED|DN_DISABLEABLE|DN_NT_ENUMERATOR|DN_NT_DRIVER]
Device Problem Code: No Problem
Driver Problem Code: Unknown
Display Memory: 69411 MB
Dedicated Memory: 3958 MB
Shared Memory: 65453 MB
Current Mode: 3840 x 2160 (32 bit) (60Hz)
Monitor Name: Dell UP3216Q (DP4k60)
Monitor Model: DELL UP3216Q
Monitor Id: DEL40C1
Native Mode: 3840 x 2160(p) (59.997Hz)
Output Type: Displayport External
Driver Name: C:\WINDOWS\System32\DriverStore\FileRepository\nv_dispui.inf_amd64_bc54d49dbc1735f8\nvd3dumx.dll,C:\WINDOWS\System32\DriverStore\FileRepository\nv_dispui.inf_amd64_bc54d49dbc1735f8\nvwgf2umx.dll,C:\WINDOWS\System32\DriverStore\FileRepository\nv_dispui.inf_amd64_bc54d49dbc1735f8\nvwgf2umx.dll,C:\WINDOWS\System32\DriverStore\FileRepository\nv_dispui.inf_amd64_bc54d49dbc1735f8\nvwgf2umx.dll
Driver File Version: 21.21.0013.7651 (English)
Driver Version: 21.21.13.7651
DDI Version: 12
Feature Levels: 12_1,12_0,11_1,11_0,10_1,10_0,9_3,9_2,9_1
Driver Model: WDDM 2.1
Graphics Preemption: DMA
Compute Preemption: DMA
Miracast: Not Supported by Graphics driver
Hybrid Graphics GPU: Not Supported
Power P-states: Not Supported
Driver Attributes: Final Retail
Driver Date/Size: 12/24/2016 6:00:00 PM, 17588040 bytes
WHQL Logo'd: No
WHQL Date Stamp: None
Device Identifier: {D7B71E3E-5080-11CF-1146-8E091BC2D835}
Vendor ID: 0x10DE
Device ID: 0x13C0
SubSys ID: 0x29833842
Revision ID: 0x00A1
Driver Strong Name: oem50.inf:0f066de3ad09d9de:Section084:21.21.13.7651:pci\ven_10de&dev_13c0
Rank Of Driver: 00D12001
Video Accel:
DXVA2 Modes: DXVA2_ModeMPEG2_VLD  DXVA2_ModeVC1_D2010  DXVA2_ModeVC1_VLD  DXVA2_ModeH264_VLD_Stereo_Progressive_NoFGT  DXVA2_ModeH264_VLD_Stereo_NoFGT  DXVA2_ModeH264_VLD_NoFGT  DXVA2_ModeHEVC_VLD_Main  DXVA2_ModeMPEG4pt2_VLD_Simple  DXVA2_ModeMPEG4pt2_VLD_AdvSimple_NoGMC 
 

[bardacuda]

The best way to get more hash rate out of 980s is to sell them for RX 480s

[Yadamosan]

The best way to get more hash rate out of 980s is to sell them for RX 480s

You can use the 980 to mine the ZEC, that is more profitable.