Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Rickirs]

I hope you know that latest drivers won't work with HD 4xxx series.

Yeah, I've already seen that. I've removed the old card before writing the first post, and later I've removed Catalyst with DDU and did a 'clean' install of the new Radeon drivers.

- I see only one card instead of two in temperature management info.
  Disable CrossFire, don't use Remote Desktop Connection.

I haven't been using either. There's only one card installed as of now, and the miner gives no temperature info at all.

Thats odd, I am out of ideas, may be someone else can help here. Its all about proper driver. Tried Claymore10.0 ?

[1715037511]

1715037511

[1715037511]

1715037511

[1715037511]

1715037511

[1715037511]

1715037511

[1715037511]

1715037511

[Rickirs]

So, the next step in my opinion it's changing these configs direct in the bios using Polaris Editor... it's quite easy... I had to do that in some cards when I was using a old version of claymore.

Look my 580 nitro micron gpu config in Polaris: https://ibb.co/dJ4KX6

What about cards with dynamic timings, like 65342 instead of 850 , will it be safe to give static mV there ?

[muzuca]

So, the next step in my opinion it's changing these configs direct in the bios using Polaris Editor... it's quite easy... I had to do that in some cards when I was using a old version of claymore.

Look my 580 nitro micron gpu config in Polaris: https://ibb.co/dJ4KX6

What about cards with dynamic timings, like 65342 instead of 850 , will it be safe to give static mV there ?

I know... but I’m using these configurations for more than 6 months and I didn’t have problems. As is a 580 nitro, it’s possible do that just in silent mode.

Using these configs, It’s easy to setup the miner and to control the gpu, but i did this in each card.

[Breesus]

Quick question guys: I have put my private wallet address in the miner which is on an Exodus wallet (software wallet), is there going to be an issue for the payout (I am getting close to that 1ETH payout) ? I never thought about that, I see that most people have a myetherwallet wallet address linked to their miner.

Same question for a Ledger or a Trezor (hardware wallet). If I buy a Ledger, can I directly put the ledger ETH address in Claymores ?

[jackbox]

Quick question guys: I have put my private wallet address in the miner which is on an Exodus wallet (software wallet), is there going to be an issue for the payout (I am getting close to that 1ETH payout) ? I never thought about that, I see that most people have a myetherwallet wallet address linked to their miner.

Same question for a Ledger or a Trezor (hardware wallet). If I buy a Ledger, can I directly put the ledger ETH address in Claymores ?

You only put address in Claymore as the user if a pool support anonymous mining. Otherwise the address to receive your coins is entered on the pool you are mining to.

[Rickirs]

Quick question guys: I have put my private wallet address in the miner which is on an Exodus wallet (software wallet), is there going to be an issue for the payout (I am getting close to that 1ETH payout) ? I never thought about that, I see that most people have a myetherwallet wallet address linked to their miner.

Same question for a Ledger or a Trezor (hardware wallet). If I buy a Ledger, can I directly put the ledger ETH address in Claymores ?

Wallet is just a way to access and manage your ETH, if you have its access keys, you can access it anywhere. So if you have generated wallet address through safe means then you are good to go.

[JKDK]

I hope you know that latest drivers won't work with HD 4xxx series.

Yeah, I've already seen that. I've removed the old card before writing the first post, and later I've removed Catalyst with DDU and did a 'clean' install of the new Radeon drivers.

- I see only one card instead of two in temperature management info.
  Disable CrossFire, don't use Remote Desktop Connection.

I haven't been using either. There's only one card installed as of now, and the miner gives no temperature info at all.

Thats odd, I am out of ideas, may be someone else can help here. Its all about proper driver. Tried Claymore10.0 ?

I found a solution..

There is no monitor on my system but when i add a monitor to GPU0 and start the miner it now sync the settings to all cards.

Is this a bug?

[Abhram]

    Hi Claymore, you can add in response getstat1 worker name? I wrote a remote client clone with auto-scan of the subnet on a given port that would completely automate the search so that the worker answered his name, while they are sorted by ip. For compat older ver, mayby add new response getstat2, 3 etc?

   Your client can send config file, but not api in api.txt, i can get full api?

[golden0707]

Hi people!

Could someone hint me how to automate restart of the miner when some incorrect shares threshold exceed ?

[muzuca]

Hi people!

Could someone hint me how to automate restart of the miner when some incorrect shares threshold exceed ?

Try the command -r in your start.bat and create a file called reboot.bat with the command "shutdown /r /t 5 /f"

“
-r   Restart miner mode. "-r 0" (default) - restart miner if something wrong with GPU. "-r -1" - disable automatic restarting. -r >20 - restart miner if something
   wrong with GPU or by timer. For example, "-r 60" - restart miner every hour or when some GPU failed.
   "-r 1" closes miner and execute "reboot.bat" file ("reboot.bash" or "reboot.sh" for Linux version) in the miner directory (if exists) if some GPU failed.
   So you can create "reboot.bat" file and perform some actions, for example, reboot system if you put this line
"shutdown /r /t 5 /f"
“

[DonRumata]

Hi,

It looks like "Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v10.2" crashes after installing "Radeon Software Crimson ReLive Edition Beta for [Suspicious link removed]pute Driver for Windows® 7 64/32 bit​" - I am using Windows 7 64-bit.
Under Window 10 the same miner works fine and finally allow to get 29.3 MHs from Radeon video card.

Any ideas how to avoid crash under Windows 7?

[golden0707]

Hi people!

Could someone hint me how to automate restart of the miner when some incorrect shares threshold exceed ?

Try the command -r in your start.bat and create a file called reboot.bat with the command "shutdown /r /t 5 /f"

“
-r   Restart miner mode. "-r 0" (default) - restart miner if something wrong with GPU. "-r -1" - disable automatic restarting. -r >20 - restart miner if something
   wrong with GPU or by timer. For example, "-r 60" - restart miner every hour or when some GPU failed.
   "-r 1" closes miner and execute "reboot.bat" file ("reboot.bash" or "reboot.sh" for Linux version) in the miner directory (if exists) if some GPU failed.
   So you can create "reboot.bat" file and perform some actions, for example, reboot system if you put this line
"shutdown /r /t 5 /f"
“

This wont help. It works then GPU hangs showing 0 speed, or temp issue or something. In my case all is fine at the begining , but in about 10-12 hours im getting alot of incorrect shares , and after i retart the miner its back to normal. I need this option. I will  even user the restart the rig option.

[muzuca]

Hi people!

Could someone hint me how to automate restart of the miner when some incorrect shares threshold exceed ?

Try the command -r in your start.bat and create a file called reboot.bat with the command "shutdown /r /t 5 /f"

“
-r   Restart miner mode. "-r 0" (default) - restart miner if something wrong with GPU. "-r -1" - disable automatic restarting. -r >20 - restart miner if something
   wrong with GPU or by timer. For example, "-r 60" - restart miner every hour or when some GPU failed.
   "-r 1" closes miner and execute "reboot.bat" file ("reboot.bash" or "reboot.sh" for Linux version) in the miner directory (if exists) if some GPU failed.
   So you can create "reboot.bat" file and perform some actions, for example, reboot system if you put this line
"shutdown /r /t 5 /f"
“

This wont help. It works then GPU hangs showing 0 speed, or temp issue or something. In my case all is fine at the begining , but in about 10-12 hours im getting alot of incorrect shares , and after i retart the miner its back to normal. I need this option. I will  even user the restart the rig option.

I understood... I’m using this app to help me in this situation: Wise Auto Shutdown http://mobile.wisecleaner.com/

In some cases I schedule to shutdown one a day... This is one way, but it’s not intelligent.

[velizluise]

Good as such. I would like to know how to configure this miner to work in antpool if possible. I know that the directions are:

stratum-eth.antpool.com:8008
stratum-eth.antpool.com:443
stratum-eth.antpool.com:25
 
but I imagine that my little knowledge makes it not so simple, I already managed to make it work in nanopool but I still do not get that functions in https://www.antpool.com thank you in advance for your answer thank you very much

[leftover_potato]

Dear friends,

May I know how do I mine only siacoin? I understand that claymore offers dual mining (ETH + SIA) but I only wanted to mine specifically SIA.

may I know what is the line that I should o in the bat file?

TQ!

[bluedragon0702]

Hi,

It looks like "Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v10.2" crashes after installing "Radeon Software Crimson ReLive Edition Beta for [Suspicious link removed]pute Driver for Windows® 7 64/32 bit​" - I am using Windows 7 64-bit.
Under Window 10 the same miner works fine and finally allow to get 29.3 MHs from Radeon video card.

Any ideas how to avoid crash under Windows 7?

Just do not install the ReLive package at the end of the Radeon Software.
You could try to uninstall it or using DDU then reinstall Radeon Software Beta.
Tested on HIS 580 8GB.

[GizmoOG]

So how are the gains when mining ethereum with this miner using nvidia's gtx 1070 rog strix card? Will I be better off just mining ZEC/verge or should I give this a go.

[AVP]

For ATI (RX 470 / 570) cards should we still be using the AMD DAG Fix Beta driver (link below) that was released back in August or a more recent version? August or a more recent version?

http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx

[vapourminer]

just use any of the 17.11.x drivers, they have the dag fix built in when you select "compute" mode in the driver.

[johnprimer]

Got a good speedup for weak cards for both eth and eth+dcr modes and a small speedup for fast cards, I will release next version of the miner with a lot of improvements within 24 hours.