unemployed2
Newbie
Offline
Activity: 2
Merit: 0
|
|
December 28, 2017, 04:08:45 PM |
|
hello all im noob, sorry, i have an error with mining and i dont know what is it. please help me what to do. i want just testing mining with my gpu. my log: 19:26:47:270 10e8 Check and remove old log files... 19:26:47:280 10e8 args: -epool eu1.ethermine.org:4444 -ewal 0x0C6B647553eEd93A83E9672D4cFEC3ED185b60FA.MorningStarMasoud -epsw x 19:26:47:287 10e8 19:26:47:303 10e8 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» 19:26:47:310 10e8 º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v10.2 º 19:26:47:320 10e8 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 19:26:47:325 10e8 19:26:47:548 10e8 ETH: 1 pool is specified 19:26:47:555 10e8 Main Ethereum pool is eu1.ethermine.org:4444 19:26:47:562 10e8 DCR: 0 pool is specified 19:26:48:021 10e8 OpenCL platform: NVIDIA CUDA 19:26:48:029 10e8 OpenCL platform: Experimental OpenCL 2.1 CPU Only Platform 19:26:48:034 10e8 OpenCL platform: AMD Accelerated Parallel Processing 19:26:48:041 10e8 No AMD cards in the list. 19:26:48:121 10e8 CUDA initializing...
19:26:48:127 10e8 NVIDIA Cards available: 1 19:26:48:133 10e8 CUDA Driver Version/Runtime Version: 9.1/8.0 19:26:48:142 10e8 GPU #0: GeForce GT 630, 4096 MB available, 2 compute units, capability: 2.1
19:26:48:147 10e8 Total cards: 1 19:26:52:158 10e8 No AMD cards in the list, ADL library will not be used. 19:26:52:173 10e8 NVML version: 9.388.19 19:26:52:331 10e8 No pool specified for Decred! Ethereum-only mining mode is enabled
19:26:52:337 10e8 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
19:26:52:343 10e8 ETH: eth-proxy stratum mode 19:26:52:351 10e8 Watchdog enabled 19:26:52:357 10e8 Remote management (READ-ONLY MODE) is enabled on port 3333 19:26:52:364 10e8
19:26:52:388 1fa4 ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.226.213> port 4444 19:26:52:554 1fa4 send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x0C6B647553eEd93A83E9672D4cFEC3ED185b60FA.MorningStarMasoud", "x"], "id": 2, "method": "eth_submitLogin"}
19:26:52:560 1fa4 ETH: Stratum - Connected (eu1.ethermine.org:4444) 19:26:52:710 1fa4 got 39 bytes 19:26:52:716 1fa4 buf: {"id":2,"jsonrpc":"2.0","result":true}
19:26:52:722 1fa4 parse packet: 38 19:26:52:729 1fa4 ETH: Authorized 19:26:52:736 1fa4 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
19:26:52:743 1fa4 new buf size: 0 19:26:52:891 1fa4 got 248 bytes 19:26:52:909 1fa4 buf: {"id":3,"jsonrpc":"2.0","result":["0x2d2f4c1d8429a70be0758c19109c48e5a3e1895bd49e2b8a8abc4c23c4fd7f62","0x10fc9a2e5b65ea3f990c50787c055ec381519a57803a159640ee6ceac8ea4f5d","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4971e6"]}
19:26:52:919 1fa4 parse packet: 247 19:26:52:936 1fa4 ETH: job changed 19:26:52:943 1fa4 new buf size: 0 19:26:52:952 1bc0 Setting DAG epoch #160... 19:26:55:487 1bc0 Setting DAG epoch #160 for GPU0 19:26:55:490 1bc0 Create GPU buffer for GPU0 19:26:55:841 1bc0 GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function 19:26:55:842 1bc0 GPU 0, Calc DAG failed! 19:26:57:370 1fa4 got 248 bytes 19:26:57:370 1fa4 buf: {"id":0,"jsonrpc":"2.0","result":["0x28d4ace2c1f659bc8d5961b220c3fe5ce66b3b5d0998f0be172b6fa64a1d3b5b","0x10fc9a2e5b65ea3f990c50787c055ec381519a57803a159640ee6ceac8ea4f5d","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4971e7"]}
19:26:57:370 1fa4 parse packet: 247 19:26:57:370 1fa4 ETH: job changed 19:26:57:371 1fa4 new buf size: 0 19:26:57:373 1fa4 ETH: 12/28/17-19:26:57 - New job from eu1.ethermine.org:4444 19:26:57:374 1fa4 target: 0x0000000112e0be82 (diff: 4000MH), epoch 160(2.25GB) 19:26:57:374 1fa4 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 19:26:57:375 1fa4 ETH: GPU0 0.000 Mh/s 19:26:59:344 1bc0 Set global fail flag, failed GPU0 19:26:59:347 1bc0 GPU 0 failed 19:26:59:347 24a0 Setting DAG epoch #160 for GPU0 19:26:59:367 24a0 GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function 19:26:59:369 24a0 GPU 0, Calc DAG failed! 19:27:02:871 24a0 Set global fail flag, failed GPU0 19:27:02:872 24a0 GPU 0 failed 19:27:02:956 1fa4 ETH: checking pool connection... 19:27:02:956 1fa4 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
19:27:03:098 1fa4 got 248 bytes 19:27:03:098 1fa4 buf: {"id":3,"jsonrpc":"2.0","result":["0x28d4ace2c1f659bc8d5961b220c3fe5ce66b3b5d0998f0be172b6fa64a1d3b5b","0x10fc9a2e5b65ea3f990c50787c055ec381519a57803a159640ee6ceac8ea4f5d","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4971e7"]}
19:27:03:098 1fa4 parse packet: 247 19:27:03:098 1fa4 ETH: job is the same 19:27:03:099 1fa4 new buf size: 0 19:27:12:955 1fa4 send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x0", "0x0000000000000000000000000000000000000000000000000000000082003de6"]}
19:27:12:971 1fa4 ETH: checking pool connection... 19:27:12:971 1fa4 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
19:27:13:319 1fa4 got 535 bytes 19:27:13:319 1fa4 buf: {"id":0,"jsonrpc":"2.0","result":["0x0dee125f59a16bbe29289283c2ecce3ef7f9c459f8e9fc4110149d3560a7a0fa","0x10fc9a2e5b65ea3f990c50787c055ec381519a57803a159640ee6ceac8ea4f5d","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4971e8"]} {"id":6,"jsonrpc":"2.0","result":true} {"id":3,"jsonrpc":"2.0","result":["0x0dee125f59a16bbe29289283c2ecce3ef7f9c459f8e9fc4110149d3560a7a0fa","0x10fc9a2e5b65ea3f990c50787c055ec381519a57803a159640ee6ceac8ea4f5d","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4971e8"]}
19:27:13:319 1fa4 parse packet: 247 19:27:13:320 1fa4 ETH: job changed 19:27:13:320 1fa4 remove first packet 287 19:27:13:320 1fa4 new buf size: 287 19:27:13:320 1fa4 parse packet: 38 19:27:13:321 1fa4 remove first packet 248 19:27:13:321 1fa4 new buf size: 248 19:27:13:321 1fa4 parse packet: 247 19:27:13:321 1fa4 ETH: job changed 19:27:13:321 1fa4 new buf size: 0 19:27:13:322 1fa4 ETH: 12/28/17-19:27:13 - New job from eu1.ethermine.org:4444 19:27:13:322 1fa4 target: 0x0000000112e0be82 (diff: 4000MH), epoch 160(2.25GB) 19:27:13:323 1fa4 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 19:27:13:324 1fa4 ETH: GPU0 0.000 Mh/s 19:27:17:577 58c GPU0 t=41C fan=45% 19:27:17:845 1eb8 em hbt: 0, fm hbt: 31, 19:27:17:845 1eb8 watchdog - thread 0 (gpu0), hb time 17969 19:27:17:845 1eb8 watchdog - thread 1 (gpu0), hb time 17969 19:27:17:846 1eb8 WATCHDOG: GPU error, you need to restart miner :( 19:27:19:005 1eb8 Restarting OK, exit...
|
|
|
|
|
|
|
|
|
The forum was founded in 2009 by Satoshi and Sirius. It replaced a
SourceForge forum.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
Xburm
Newbie
Offline
Activity: 1
Merit: 0
|
|
December 28, 2017, 04:52:42 PM |
|
Quick question for you Claymore Gurus I'm running few 13 card rigs using ethos with claymore, once in awhile i'll have one card over heat but the whole rig goes down (overheat mode), thoughts?
|
|
|
|
MeetTheFokker
Newbie
Offline
Activity: 1
Merit: 0
|
|
December 28, 2017, 06:15:32 PM |
|
Mined eth for couple of months on my home pc. Couple of days ago had to leave for a week, and left my pc mining in headless mode with remote access via teamviewer. Mining was going just fine, but I had to restart my PC remotely. After the restart claymores miner gives me this: ETH: 1 pool is specified Main Ethereum pool is eth-eu1.nanopool.org:9999 SC: 5 pools are specified Main Siacoin pool is sia-eu1.nanopool.org:7777 At least 16 GB of Virtual Memory is required for multi-GPU systems Make sure you defined GPU_MAX_ALLOC_PERCENT 100 Be careful with overclocking, use default clocks for first tests Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool OpenCL initializing...
AMD Cards available: 1 GPU #0: Fiji, 4096 MB available, 64 compute units GPU #0 recognized as Fury X/Nano POOL/SOLO version GPU #0: algorithm ASM No NVIDIA CUDA GPUs detected. Total cards: 1 ETH: Stratum - connecting to 'eth-eu1.nanopool.org' <217.182.65.224> port 9999 DUAL MINING MODE ENABLED: ETHEREUM+SIACOIN ETH: eth-proxy stratum mode Watchdog enabled Remote management (READ-ONLY MODE) is enabled on port 3333
SC: Stratum - connecting to 'sia-eu1.nanopool.org' <79.137.82.104> port 7777 ETH: Stratum - Connected (eth-eu1.nanopool.org:9999) SC: Stratum - Connected (sia-eu1.nanopool.org:7777) ETH: Authorized Setting DAG epoch #160... SC: Authorized SC: 12/28/17-19:13:54 - New job from sia-eu1.nanopool.org:7777 Setting DAG epoch #160 for GPU0 Create GPU buffer for GPU0 ETH: 12/28/17-19:13:58 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s SC - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0 SC: GPU0 0.000 Mh/s ETH: 12/28/17-19:14:02 - New job from eth-eu1.nanopool.org:9999 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s SC - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0 SC: GPU0 0.000 Mh/s Why hashrate is at zero? Is there an issue, when mining headless?
|
|
|
|
Todd_9
Newbie
Offline
Activity: 2
Merit: 0
|
|
December 28, 2017, 06:23:02 PM |
|
I'm also getting the "GpuMiner cu_k1 failed 30" error message. Here's the full transcript... NVIDIA Cards available: 1 CUDA Driver Version/Runtime Version: 8.0/8.0 GPU #0: GeForce GTX TITAN X, 12288 MB available, 24 compute units, capability: 5.2
Total cards: 1 ETH: Stratum - connecting to 'eth-us-east1.nanopool.org' <192.99.69.170> port 9999 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1) ETH: eth-proxy stratum mode ETH: Stratum - Connected (eth-us-east1.nanopool.org:9999) Watchdog disabled Remote management (READ-ONLY MODE) is enabled on port 3333
ETH: Authorized Setting DAG epoch #160... Setting DAG epoch #160 for GPU0 Create GPU buffer for GPU0 GPU0 DAG creation time - 6065 ms Setting DAG epoch #160 for GPU0 done GPU 0, GpuMiner cu_k1 failed 30, unknown error GPU 0, GpuMiner kx failed 1 GPU 0 failed GPU 0, GpuMiner cu_k1 failed 30, unknown error GPU 0, GpuMiner kx failed 1 GPU 0 failed NVML: cannot get current temperature, error 999 (an internal driver error occurred) ETH: 12/28/17-09:51:05 - New job from eth-us-east1.nanopool.org:9999 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 ETH: GPU0 0.000 Mh/s NVML: cannot get current temperature, error 999 (an internal driver error occurred) ETH: 12/28/17-09:51:09 - New job from eth-us-east1.nanopool.org:9999 Right before mining starts my screen goes black for a second, then I see the error messages regarding temperature, and then "GPU 0 failed". I'm using a Titan X on Windows 10. I started with the latest nVidia driver, then downgraded to 372.54. The Windows Fall Creators Update has been installed. Some research says the errors are related to hardware or connection failures, but I doubt there's anything wrong with the GPU because GPU-Z is able to get temperature and fan speed. I'm just getting started with Claymore so any advice is appreciated. http://toddmoyer.net/uploads/TitanX-Sensor-Capture.PNG
|
|
|
|
Matias
|
|
December 28, 2017, 07:48:01 PM |
|
I tried -cclock, but it didn’t seem to have any effect on Radeon R9 290X. I also tried to write to /sys/class/drm/card0/device/pp_sclk_od, according to this https://www.phoronix.com/scan.php?page=article&item=amd-rx480-od&num=1but the value didn’t change from zero. Is there a way to overclock Radeon R9 290X in Claymore? I’m using AMDGPU-Pro Driver 17.40
|
|
|
|
Ursul0
|
|
December 28, 2017, 09:10:54 PM |
|
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
I'd say that the important part is in the bold now. What it means that the driver has just failed somewhere and claymore just loves to do that when mixed(same miner instance) with Polarises that work alongside nvidias. also I have a worker with 10 GPUs: 8*1060 - running claymore on "platform 1" switch with 2 Vegas fe doing XMR - no issues there.
|
|
|
|
Ryuh
|
|
December 28, 2017, 09:49:15 PM |
|
Hey guys, I have a problem with one of my mining rigs RX580 8GB. It mines for 1 day or something and suddenly start to receive this error: server: bind failed with error: 10048 (port for remote management is busy, use different -mport value), next attempt in 20sec... After that all the hashrate drops to zero and it just keeps retrying until I manually restart the miner. Can someone help here?
|
|
|
|
Ursul0
|
|
December 28, 2017, 10:28:07 PM |
|
I tried -cclock, but it didn’t seem to have any effect on Radeon R9 290X. I also tried to write to /sys/class/drm/card0/device/pp_sclk_od, according to this https://www.phoronix.com/scan.php?page=article&item=amd-rx480-od&num=1but the value didn’t change from zero. Is there a way to overclock Radeon R9 290X in Claymore? I’m using AMDGPU-Pro Driver 17.40 you probably should try 9 something like 9.6 it will not have new amd api and will work with proper drivers... like 16.10.4 or smth EDIT: ohhh. nix user, still the same issue... maybe
|
|
|
|
e6ug
|
|
December 29, 2017, 12:04:07 AM |
|
Claymore, the Bitcore (BTX) community would love an optimized AMD miner as ETH mining profits are on the way down.
|
|
|
|
scarab2378
Newbie
Offline
Activity: 35
Merit: 0
|
|
December 29, 2017, 02:02:16 AM |
|
I just made a change to my mining rig and removed 1 GPU (of 7). Rebooted and found that Claymore Dual miner runs but is not showing any hashrate info on the screen unless I press the s key.
Can anyone tell me why Claymore Dual miner would not show me my current hashrates ?
|
|
|
|
rizabbasi
|
|
December 29, 2017, 05:03:33 AM |
|
I observed that on Claymore there was constant non-stop hashing on all cards but on nanopool stats the hashrate was ZERO. Any clue on this?
|
Shipping beats perfection. So "ship" and then improve (that 1%).
|
|
|
Zorr0
Newbie
Offline
Activity: 10
Merit: 0
|
|
December 29, 2017, 05:11:43 AM |
|
I see huge influx of people here and some are way more clueless then the others... so here some tips for you there, mining with Polarises on Win10: 1. make sure you have sufficient power on your PSU(10-20% spare from the peaks) Note: properly configured polaris should be just below 150W on dual ETH 2. molex power to raisers is probably the most common point of failure (bad/unstable hash, card disconnects, crashes, and such) Note: it seems there's no such thing as bad raiser, only bad contacts in power connectors 3. disable all you can via Group Policy, especially windows update and drivers update 4. use latest DDU and install 17.11.1 driver, pointing manually from Device Manager to the dir with unzipped driver Note: Do not use blockchain beta driver as it has some issues with latest API and also doesn't support more than 8 AMD GPUs 5. set compute mode for all GPUs. here's the example for dev0 (special thanks to @ober for that): [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000] "KMD_EnableInternalLargePage"=dword:00000002 6. Flash bios mods with tighter straps. Look for PolarisEditor v164 with "one click modify" bios timings and use atiflash without gui 7. Use overdriven tool (RX5* Polarises normally do well on 1180 & 1950-2150 @ 850mv, RX4* may need lower core freq) Note: do not use AB. Note: do not use claymore for core&mem&fans control 8. Use sysinternals autologon and built-in MS task scheduler 9. make reboot.bat and set "-r 1", as restarting miner most likely will NOT work Bonus: * I'm using RealVNC for remote access - flawless * you may find useful: display dummy dongles and usb watchdogs * and as always openVPN is your friend If I just made your life easier and increased your profits PM me and I'll give you my ETH address:) ...or you can just find it in my profile yourself Hi. Excellent post, but I have a question: Why not use Claymore for voltage/frequency control - it works fine? Overdriventool on the other hand sometimes doesn't set voltages for 1 of the cards. AND my main question how do you control fans??? (claymore makes them go up and down, overdriventool doesn't control fans on some rigs and doesn't control voltages on some random cards)
|
|
|
|
ZiDanRO
Newbie
Offline
Activity: 2
Merit: 0
|
|
December 29, 2017, 05:58:26 AM |
|
I see huge influx of people here and some are way more clueless then the others... so here some tips for you there, mining with Polarises on Win10: 1. make sure you have sufficient power on your PSU(10-20% spare from the peaks) Note: properly configured polaris should be just below 150W on dual ETH 2. molex power to raisers is probably the most common point of failure (bad/unstable hash, card disconnects, crashes, and such) Note: it seems there's no such thing as bad raiser, only bad contacts in power connectors 3. disable all you can via Group Policy, especially windows update and drivers update 4. use latest DDU and install 17.11.1 driver, pointing manually from Device Manager to the dir with unzipped driver Note: Do not use blockchain beta driver as it has some issues with latest API and also doesn't support more than 8 AMD GPUs 5. set compute mode for all GPUs. here's the example for dev0 (special thanks to @ober for that): [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000] "KMD_EnableInternalLargePage"=dword:00000002 6. Flash bios mods with tighter straps. Look for PolarisEditor v164 with "one click modify" bios timings and use atiflash without gui 7. Use overdriven tool (RX5* Polarises normally do well on 1180 & 1950-2150 @ 850mv, RX4* may need lower core freq) Note: do not use AB. Note: do not use claymore for core&mem&fans control 8. Use sysinternals autologon and built-in MS task scheduler 9. make reboot.bat and set "-r 1", as restarting miner most likely will NOT work Bonus: * I'm using RealVNC for remote access - flawless * you may find useful: display dummy dongles and usb watchdogs * and as always openVPN is your friend If I just made your life easier and increased your profits PM me and I'll give you my ETH address:) ...or you can just find it in my profile yourself Hi. Excellent post, but I have a question: Why not use Claymore for voltage/frequency control - it works fine? Overdriventool on the other hand sometimes doesn't set voltages for 1 of the cards. AND my main question how do you control fans??? (claymore makes them go up and down, overdriventool doesn't control fans on some rigs and doesn't control voltages on some random cards) I also use Claymore for settings. On Sapphire RX580 cards is ok with everything, but i have also a MSI Gaming X RX580 and the fan is starting randomly based on the card temperature. So i use Speedfan from http://www.almico.com/speedfan.php to set a stable fan speed on MSI.
|
|
|
|
scarab2378
Newbie
Offline
Activity: 35
Merit: 0
|
|
December 29, 2017, 08:28:35 AM |
|
I just made a change to my mining rig and removed 1 GPU (of 7). Rebooted and found that Claymore Dual miner runs but is not showing any hashrate info on the screen unless I press the s key.
Can anyone tell me why Claymore Dual miner would not show me my current hashrates ?
Weird, claymore began showing my hashrate on its own. Not sure why. Possibly something to do with the pool?
|
|
|
|
CryptonikaTrade
Member
Offline
Activity: 154
Merit: 85
|
|
December 29, 2017, 10:03:48 AM |
|
I updated miner to version 10.2 but on musicoin it is restarted from time to time on all the rigs. What can be wrong?
|
|
|
|
unemployed2
Newbie
Offline
Activity: 2
Merit: 0
|
|
December 29, 2017, 10:26:16 AM |
|
hello all im noob, sorry, i have an error with mining and i dont know what is it. please help me what to do. i want just testing mining with my gpu. my log: 19:26:47:270 10e8 Check and remove old log files... 19:26:47:280 10e8 args: -epool eu1.ethermine.org:4444 -ewal 0x0C6B647553eEd93A83E9672D4cFEC3ED185b60FA.MorningStarMasoud -epsw x 19:26:47:287 10e8 19:26:47:303 10e8 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» 19:26:47:310 10e8 º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v10.2 º 19:26:47:320 10e8 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 19:26:47:325 10e8 19:26:47:548 10e8 ETH: 1 pool is specified 19:26:47:555 10e8 Main Ethereum pool is eu1.ethermine.org:4444 19:26:47:562 10e8 DCR: 0 pool is specified 19:26:48:021 10e8 OpenCL platform: NVIDIA CUDA 19:26:48:029 10e8 OpenCL platform: Experimental OpenCL 2.1 CPU Only Platform 19:26:48:034 10e8 OpenCL platform: AMD Accelerated Parallel Processing 19:26:48:041 10e8 No AMD cards in the list. 19:26:48:121 10e8 CUDA initializing...
19:26:48:127 10e8 NVIDIA Cards available: 1 19:26:48:133 10e8 CUDA Driver Version/Runtime Version: 9.1/8.0 19:26:48:142 10e8 GPU #0: GeForce GT 630, 4096 MB available, 2 compute units, capability: 2.1
19:26:48:147 10e8 Total cards: 1 19:26:52:158 10e8 No AMD cards in the list, ADL library will not be used. 19:26:52:173 10e8 NVML version: 9.388.19 19:26:52:331 10e8 No pool specified for Decred! Ethereum-only mining mode is enabled
19:26:52:337 10e8 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
19:26:52:343 10e8 ETH: eth-proxy stratum mode 19:26:52:351 10e8 Watchdog enabled 19:26:52:357 10e8 Remote management (READ-ONLY MODE) is enabled on port 3333 19:26:52:364 10e8
19:26:52:388 1fa4 ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.226.213> port 4444 19:26:52:554 1fa4 send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x0C6B647553eEd93A83E9672D4cFEC3ED185b60FA.MorningStarMasoud", "x"], "id": 2, "method": "eth_submitLogin"}
19:26:52:560 1fa4 ETH: Stratum - Connected (eu1.ethermine.org:4444) 19:26:52:710 1fa4 got 39 bytes 19:26:52:716 1fa4 buf: {"id":2,"jsonrpc":"2.0","result":true}
19:26:52:722 1fa4 parse packet: 38 19:26:52:729 1fa4 ETH: Authorized 19:26:52:736 1fa4 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
19:26:52:743 1fa4 new buf size: 0 19:26:52:891 1fa4 got 248 bytes 19:26:52:909 1fa4 buf: {"id":3,"jsonrpc":"2.0","result":["0x2d2f4c1d8429a70be0758c19109c48e5a3e1895bd49e2b8a8abc4c23c4fd7f62","0x10fc9a2e5b65ea3f990c50787c055ec381519a57803a159640ee6ceac8ea4f5d","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4971e6"]}
19:26:52:919 1fa4 parse packet: 247 19:26:52:936 1fa4 ETH: job changed 19:26:52:943 1fa4 new buf size: 0 19:26:52:952 1bc0 Setting DAG epoch #160... 19:26:55:487 1bc0 Setting DAG epoch #160 for GPU0 19:26:55:490 1bc0 Create GPU buffer for GPU0 19:26:55:841 1bc0 GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function 19:26:55:842 1bc0 GPU 0, Calc DAG failed! 19:26:57:370 1fa4 got 248 bytes 19:26:57:370 1fa4 buf: {"id":0,"jsonrpc":"2.0","result":["0x28d4ace2c1f659bc8d5961b220c3fe5ce66b3b5d0998f0be172b6fa64a1d3b5b","0x10fc9a2e5b65ea3f990c50787c055ec381519a57803a159640ee6ceac8ea4f5d","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4971e7"]}
19:26:57:370 1fa4 parse packet: 247 19:26:57:370 1fa4 ETH: job changed 19:26:57:371 1fa4 new buf size: 0 19:26:57:373 1fa4 ETH: 12/28/17-19:26:57 - New job from eu1.ethermine.org:4444 19:26:57:374 1fa4 target: 0x0000000112e0be82 (diff: 4000MH), epoch 160(2.25GB) 19:26:57:374 1fa4 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 19:26:57:375 1fa4 ETH: GPU0 0.000 Mh/s 19:26:59:344 1bc0 Set global fail flag, failed GPU0 19:26:59:347 1bc0 GPU 0 failed 19:26:59:347 24a0 Setting DAG epoch #160 for GPU0 19:26:59:367 24a0 GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function 19:26:59:369 24a0 GPU 0, Calc DAG failed! 19:27:02:871 24a0 Set global fail flag, failed GPU0 19:27:02:872 24a0 GPU 0 failed 19:27:02:956 1fa4 ETH: checking pool connection... 19:27:02:956 1fa4 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
19:27:03:098 1fa4 got 248 bytes 19:27:03:098 1fa4 buf: {"id":3,"jsonrpc":"2.0","result":["0x28d4ace2c1f659bc8d5961b220c3fe5ce66b3b5d0998f0be172b6fa64a1d3b5b","0x10fc9a2e5b65ea3f990c50787c055ec381519a57803a159640ee6ceac8ea4f5d","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4971e7"]}
19:27:03:098 1fa4 parse packet: 247 19:27:03:098 1fa4 ETH: job is the same 19:27:03:099 1fa4 new buf size: 0 19:27:12:955 1fa4 send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x0", "0x0000000000000000000000000000000000000000000000000000000082003de6"]}
19:27:12:971 1fa4 ETH: checking pool connection... 19:27:12:971 1fa4 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
19:27:13:319 1fa4 got 535 bytes 19:27:13:319 1fa4 buf: {"id":0,"jsonrpc":"2.0","result":["0x0dee125f59a16bbe29289283c2ecce3ef7f9c459f8e9fc4110149d3560a7a0fa","0x10fc9a2e5b65ea3f990c50787c055ec381519a57803a159640ee6ceac8ea4f5d","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4971e8"]} {"id":6,"jsonrpc":"2.0","result":true} {"id":3,"jsonrpc":"2.0","result":["0x0dee125f59a16bbe29289283c2ecce3ef7f9c459f8e9fc4110149d3560a7a0fa","0x10fc9a2e5b65ea3f990c50787c055ec381519a57803a159640ee6ceac8ea4f5d","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4971e8"]}
19:27:13:319 1fa4 parse packet: 247 19:27:13:320 1fa4 ETH: job changed 19:27:13:320 1fa4 remove first packet 287 19:27:13:320 1fa4 new buf size: 287 19:27:13:320 1fa4 parse packet: 38 19:27:13:321 1fa4 remove first packet 248 19:27:13:321 1fa4 new buf size: 248 19:27:13:321 1fa4 parse packet: 247 19:27:13:321 1fa4 ETH: job changed 19:27:13:321 1fa4 new buf size: 0 19:27:13:322 1fa4 ETH: 12/28/17-19:27:13 - New job from eu1.ethermine.org:4444 19:27:13:322 1fa4 target: 0x0000000112e0be82 (diff: 4000MH), epoch 160(2.25GB) 19:27:13:323 1fa4 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 19:27:13:324 1fa4 ETH: GPU0 0.000 Mh/s 19:27:17:577 58c GPU0 t=41C fan=45% 19:27:17:845 1eb8 em hbt: 0, fm hbt: 31, 19:27:17:845 1eb8 watchdog - thread 0 (gpu0), hb time 17969 19:27:17:845 1eb8 watchdog - thread 1 (gpu0), hb time 17969 19:27:17:846 1eb8 WATCHDOG: GPU error, you need to restart miner :( 19:27:19:005 1eb8 Restarting OK, exit... no any one help? im wating... please help me
|
|
|
|
Tiky-turbo
Newbie
Offline
Activity: 17
Merit: 0
|
|
December 29, 2017, 12:10:50 PM |
|
I tried -cclock, but it didn’t seem to have any effect on Radeon R9 290X. I also tried to write to /sys/class/drm/card0/device/pp_sclk_od, according to this https://www.phoronix.com/scan.php?page=article&item=amd-rx480-od&num=1but the value didn’t change from zero. Is there a way to overclock Radeon R9 290X in Claymore? I’m using AMDGPU-Pro Driver 17.40 For my r9 280x is still the best driver [Guru3D]-radeon-crimson-15.12-with-dotnet45-win7-64bit
|
|
|
|
Matias
|
|
December 29, 2017, 03:23:45 PM |
|
Is it possible to use amd and nvidia card on the same rig? I’m using Ubuntu 16.04.
|
|
|
|
Todd_9
Newbie
Offline
Activity: 2
Merit: 0
|
|
December 29, 2017, 03:31:54 PM |
|
NVML: cannot get current temperature, error 999 (an internal driver error occurred)
I'd say that the important part is in the bold now. What it means that the driver has just failed somewhere and claymore just loves to do that when mixed(same miner instance) with Polarises that work alongside nvidias. also I have a worker with 10 GPUs: 8*1060 - running claymore on "platform 1" switch with 2 Vegas fe doing XMR - no issues there. Yeah, looks like when the screen goes black for a second it's the driver crashing, then nothing works after that. I'd be interested to learn from anyone who has a Titan X working what the magic combination of drivers and settings are. Thanks Ursul0.
|
|
|
|
PB_SilentMiner
Newbie
Offline
Activity: 36
Merit: 0
|
|
December 29, 2017, 03:44:35 PM |
|
Hi,
I am having a hard time with my voltage setup on my second rig so any help would be great, I have the below setup.
Asrock H81 BTC Pro R2.0 6 x Sapphire RX480 Nitro+ 8GB 2 x EVGA 750 G2 PSU
All bios mods are running Ubermix 3.1 via PBE 1.6.4
It currently runs cards at 1100/2000 875/850 & a couple at 1050/2000 850/850
I am getting between 29.2MH/s & 29.5MH/s per card total of 175.5MH/s for entire rig.
Running WIN10PROx64, Claymore 10.1, using DAGFIX drivers mining ETH only, but it is pulling over 900w at the wall, using Wattman to control speeds etc. (Temps range from 57-62)
My rigs run relatively quiet, due to their locations, quiet enough the wife is happy to have them in the room and quiet enough you can hold a conversation next to them (Saves me having to turn on the heating)
I had this running at just under 800w a few weeks ago, but unable to reproduce how I did this, so any help would be great
Managed to reset everything and start again, now pulling 840w-845w. alot better than the 960w it was pulling. And managed to squeeze out another 1MH/s and lower temps a degree or 2 Not sure what happened overnight, but woke up to the rig going nuts, pulling 1150w, killed miner and restarted, now pulling 765w - 770w WTF? After a reboot its now pulling 900w - 920w erratically. Anyone have any ideas?? its getting frustrating, it can run for weeks stable as hell and poof overnight, no changes it just decides to throw a wobbly. My 7x RX470 rig has been running for months no issues (fingers crossed), so solid. But the RX480 rig, same OS, same CM, Same Drivers, Same PSU's etc does not. read my post here: https://bitcointalk.org/index.php?topic=1433925.msg26800863#msg26800863do not use blockchain drivers and use overdriven for gpu configs I’m using blockchain drivers, but to stable my rigs I need to open and close the miner program three or four times to get the correct speed and config. The process is: click in the claymore miner, waits until setting up all the Dag files, before start really mine, I close and repeat the process until the speed is ok. I have 3 rigs, 480 and 580 nitro 8gb, the most stable are the 580 nitro... when stabilize the rigs works for more than 40 hours. I’m using all the config commands of claymore to set the clock and voltage. This seems to do the trick, let it run until it has finished creating DAGs in memory, close and re-open, holds at 780-790w for full rig for over 48 hours and counting Thanks for recommendation.
|
|
|
|
|