Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[hotx]

AMD Radeon R7 360, windows 10

Mining for 10-15 minutes. Hash rate : 1.2 Mh/s for Musicoin and 18 Mh/s for Siacoin. No shares still. Mining on Miningpoolhub and nanopool.

Is there someone who could help?

Did you set up a wallet and configure claymore correctly? And just an FYI, you may want to rethink your GPU choice.  At your current rate you may not see anything cause its super slow. My Siacoin is 2500 Mh/s and it still takes 5 days to get a payout.

[ltomovski]

Hi
I have a weird problem
I have a card that is running hotter than the others in the RIG .. they all are Gigabyte RX 570 4GB gaming ...
so I modified the fan profile in mis afterburner in order to increase fan speed .. I made it when the temp is 73C fan speed to be around 85%
.. but this never happens .. claymore miner reports 73% fan speed while afterburner reports 85% fan speed .. why there is a difference
the problem occurs in 10.1, 10.2 and 10.3
https://ibb.co/nMmgUw

[roland1980]

Hello,

I'm totally new to this but I've been searching for hours and cant find adequate info to get this miner to work.
I have only changed the batch file. 
ewallet on Electrum
windows 10
My startup screen looks like this:

D:\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v10.3>EthDcrMiner64.exe -epool eu1-etc.ethermine.org:4444 -ewal 0x185mK2WA77UTMVLXxn9xPSrEzwk28jLeqw.Rig -epsw x -mode 1 -mport 0 -allpools 1

╔════════════════════════════════════════════════════════════════╗
║     Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v10.3      ║
╚════════════════════════════════════════════════════════════════╝

ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
AMD OpenCL platform not found
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
CUDA initializing...

NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 9.1/8.0
GPU #0: GeForce GTX 1060, 6144 MB available, 10 compute units, capability: 6.1  (pci bus 1:0:0)

Total cards: 1
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <37.187.56.197> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
ETH: Share rejected!
Watchdog enabled

GPU0 t=45C fan=0%
ETH: Job timeout, disconnect, retry in 20 sec...
GPU0 t=45C fan=0%
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <37.187.56.197> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETH: Share rejected!
GPU0 t=46C fan=0%
ETH: Job timeout, disconnect, retry in 20 sec...
GPU0 t=46C fan=0%
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <37.187.56.197> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETH: Share rejected!
GPU0 t=46C fan=0%
ETH: Job timeout, disconnect, retry in 20 sec...
GPU0 t=46C fan=0%

[neweggslave23]

If fan/temperature control does not work for you, PM me what Windows version you use and send the complete miner log file for about two minutes of work.

Hi with B434, temp and fan now shows up. Sorry i couldn't pm, apparently i'm at my account's limit of 2 per day.

 

[Claymore]

If you have single AMD card, in some cases v10.3 will not manage fan/temperature for Adrenalin drivers, within 24 hours I will release a small update to fix it.

[TRON_NZ]

Any update on 10.3 for linux, thanks.

[igotfits]

If you have single AMD card, in some cases v10.3 will not manage fan/temperature for Adrenalin drivers, within 24 hours I will release a small update to fix it.

So it's safe to update to the latest AMD drivers? i havent updated since the blockchain drivers were released.

[igotfits]

Hi

Do you know if dual mining will continue to be profitable after the exit of these machines?

https://itopshop.net/collections/miners/products/group-buy_-baikal-giant-b-blake256r14-blake256r8-blake2b-lbry-pascal-160g-410w-for-blake256r14?variant=775474774035

I really have no idea how it would affect the dual mining

regards

Those machines will destroy difficulty, by destroying i mean make it climb like crazy and thus cutting down profit for regular GPU mining.

[jonathan1683]

Hello,

I have been using this miner and it has been working good for ETH only mode. Today I tried to use it to mine ETH+SIA and it works randomly. I am using nanopool and ethermine.org and all the time I am mining some of my machines show offline are report half the hash rate then it's actually doing. I thought it might be an issue with nanopool, but I looked at my ethermine page and 2 of 3 of my workers are offline and one is only using half of it's hashing power. Also 2 of my workers show offline on nanopool and then they will randomly show back online again. Also when i look at the cmd window the miner shows like it's working fine 60 MH/s on the window, but ethermine is reporting 30.


have have 3 pc's running 1070ti one of the PCs has two cards in it.

Thanks for the help,

[sellscript]

how config Musicoin(MUSIC) on Claymore's simplemining.net?

Thanks

[leonix007]

Hello,

I'm totally new to this but I've been searching for hours and cant find adequate info to get this miner to work.
I have only changed the batch file. 
ewallet on Electrum
windows 10
My startup screen looks like this:

D:\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v10.3>EthDcrMiner64.exe -epool eu1-etc.ethermine.org:4444 -ewal 0x185mK2WA77UTMVLXxn9xPSrEzwk28jLeqw.Rig -epsw x -mode 1 -mport 0 -allpools 1

╔════════════════════════════════════════════════════════════════╗
║     Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v10.3      ║
╚════════════════════════════════════════════════════════════════╝

ETH: 1 pool is specified
Main Ethereum pool is eu1-etc.ethermine.org:4444
AMD OpenCL platform not found
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
CUDA initializing...

NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 9.1/8.0
GPU #0: GeForce GTX 1060, 6144 MB available, 10 compute units, capability: 6.1  (pci bus 1:0:0)

Total cards: 1
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <37.187.56.197> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
ETH: Share rejected!
Watchdog enabled

GPU0 t=45C fan=0%
ETH: Job timeout, disconnect, retry in 20 sec...
GPU0 t=45C fan=0%
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <37.187.56.197> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETH: Share rejected!
GPU0 t=46C fan=0%
ETH: Job timeout, disconnect, retry in 20 sec...
GPU0 t=46C fan=0%
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <37.187.56.197> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETH: Share rejected!
GPU0 t=46C fan=0%
ETH: Job timeout, disconnect, retry in 20 sec...
GPU0 t=46C fan=0%

Try to change pools, check your clocks, I wonder why your Fans is 0%, try to play with your clocks in Afterburner

see this thread for 1060 users for their core clock speed configurations

https://bitcointalk.org/index.php?topic=1575547.0

[hotx]

how config Musicoin(MUSIC) on Claymore's simplemining.net?

Thanks

A google search gives a pretty good article which should help you
https://blockonomi.com/mine-musicoin/

If you still have questions, ask something more specific and we can help.

[equasar]

What is the Hashrate for a AMD Vega 56?

[Sine Nomine]

@equasar
High 30's, which isn't worth it.

Mine CryptoNight coins instead, those work really well on Vega cards.

[syraka76]

Has anyone noticed that etherman loses settings?

[Claymore]

I uploaded a small fix to v10.3, so re-download v10.3 if you have one AMD card and miner does not show its temperature.

[frks]

I uploaded a small fix to v10.3, so re-download v10.3 if you have one AMD card and miner does not show its temperature.

After start and press button 's' i get messages:
Temperature control thread hangs, need to restart miner!

[Nana99]

How does the temperature management works?

[wll1rah]

@Claymore

feature request:  Can you add BlakeR8 support and switching of -dcoin after miner starts

[hotx]

What is the Hashrate for a AMD Vega 56?

close to 38 MH/s