⚡[ANN]⚡ ▐░Espers [ESP]░▌▐░PoW/PoS░▌▐░HMQ1725 Algo░▌ ▐░New Features░▌

[CoinMin3r]

how the hell do i do that?

You have to re-sync from the scratch buddy. For that delete everything except wallet.dat from your ESP appdata and launch the ESP client.

[my luck]

how the hell do i do that?

Look this

Here is a bootstrap to Espers (updated on 17th)
https://muex.io/Bootstrap

[Noojna]

I can't sync anymore. Tried some addnodes, didnt work, zero peers.

I am running 8.5.1 patch 6, is there a new version I wasnt told about? The OP of this thread still points to an outdated wallet for windows.

I am seeing references to 8.5.2 in GitHub - is this my problem? Where do I get this version for windows please?

Also can someone pass me some good nodes, please?

[Hangterisaan]

I can't sync anymore. Tried some addnodes, didnt work, zero peers.

I am running 8.5.1 patch 6, is there a new version I wasnt told about? The OP of this thread still points to an outdated wallet for windows.

I am seeing references to 8.5.2 in GitHub - is this my problem? Where do I get this version for windows please?

Also can someone pass me some good nodes, please?

Here u go

addnode=199.26.184.214:22448
addnode=104.236.150.155:22448
addnode=159.203.24.196:22448
addnode=46.101.188.194:22448
addnode=173.18.196.253:22448
addnode=208.68.36.6:22448
addnode=146.185.153.196:22448
addnode=188.166.155.131:22448
addnode=107.170.212.222:22448
addnode=159.203.12.73:22448
addnode=217.175.119.126:22448

[Noojna]

I can't sync anymore. Tried some addnodes, didnt work, zero peers.

I am running 8.5.1 patch 6, is there a new version I wasnt told about? The OP of this thread still points to an outdated wallet for windows.

I am seeing references to 8.5.2 in GitHub - is this my problem? Where do I get this version for windows please?

Also can someone pass me some good nodes, please?

Here u go

addnode=199.26.184.214:22448
addnode=104.236.150.155:22448
addnode=159.203.24.196:22448
addnode=46.101.188.194:22448
addnode=173.18.196.253:22448
addnode=208.68.36.6:22448
addnode=146.185.153.196:22448
addnode=188.166.155.131:22448
addnode=107.170.212.222:22448
addnode=159.203.12.73:22448
addnode=217.175.119.126:22448

I have tried these before; copy paste from an earlier post on this thread is not helping me.

Need new ones, it seems...

[shintosai]

I can't sync anymore. Tried some addnodes, didnt work, zero peers.

I am running 8.5.1 patch 6, is there a new version I wasnt told about? The OP of this thread still points to an outdated wallet for windows.

I am seeing references to 8.5.2 in GitHub - is this my problem? Where do I get this version for windows please?

Also can someone pass me some good nodes, please?

Here u go

addnode=199.26.184.214:22448
addnode=104.236.150.155:22448
addnode=159.203.24.196:22448
addnode=46.101.188.194:22448
addnode=173.18.196.253:22448
addnode=208.68.36.6:22448
addnode=146.185.153.196:22448
addnode=188.166.155.131:22448
addnode=107.170.212.222:22448
addnode=159.203.12.73:22448
addnode=217.175.119.126:22448

I have tried these before; copy paste from an earlier post on this thread is not helping me.

Need new ones, it seems...

hi mate maybe you can send PM with the dev team so they can check what would be the best resolution with your concern, i know you supporting this coin way back so they will see how will work with you and assist you with all possible resolution to resolve this. good luck mate.

[worgon12]

have no connection to the network

Just seen the dev reworked the source on github

Espers v0.8.5.3 Patch-6

[Noojna]

Man! 8.5.3!!! Espers has a communication problem!

Still zero peers with my 8.5.1 

[gawlea]

Man! 8.5.3!!! Espers has a communication problem!

Still zero peers with my 8.5.1 

Try to add this nodes here:

Code:

addnode=104.236.150.155:22448
addnode=159.203.24.196:22448
addnode=46.101.188.194:22448
addnode=173.18.196.253:22448
addnode=208.68.36.6:22448
addnode=146.185.153.196:22448
addnode=188.166.155.131:22448
addnode=107.170.212.222:22448
addnode=159.203.12.73:22448

I have 23 connections to espers network with v8.5.1

[pallas]

If you are on a fork you don't necessarily need to reload the blockchain.
It may reorganise itself, provided you are on the latest client.

[CryptoCoderz]

@Everyone

Espers v0.8.5.3 has been released
The chain will continue to move the way it currently does on PoS until bock 642,000 (sometime tomorrow)
After this however PoW and PoS will equally once again find blocks and the DarkGravityWave will run as it should.
Excuse the inconvenience of this! -- yes that was very drone sounding SORRY! but had to restate this as it is actually corrected now
Also we are excited to announce a new system that has been put into the chain that will ensure blocktimes along with other chain params that are part of the system.

Please NOTE: You do NOT have to re-sync or do anything special. Just run the new client, the server for auto-updates should be back online sometime tomorrow in the meantime PLEASE USE THE LINK BELOW
Alternatively you can download the standalone Windows client here.

Mac client to follow suite, Linux users please re-compile.

Some addnodes while the servers are in maintenance

Code:

addnode=104.236.150.155:22448
addnode=104.237.0.79:22448
addnode=107.170.212.222:22448
addnode=120.24.217.96:22448
addnode=144.76.237.39:22448
addnode=146.185.153.196:22448
addnode=188.68.49.137:22448
addnode=199.26.184.214:22448
addnode=208.68.36.6:22448
addnode=217.175.119.126:22448
addnode=24.228.192.97:22448
addnode=46.101.188.194:22448
addnode=5.157.115.132:22448
addnode=85.145.32.75:22448
addnode=91.121.77.74:22448

If you are on a fork you don't necessarily need to reload the blockchain.
It may reorganise itself, provided you are on the latest client.

^^ this the client should re-index you over a period of time.

[Jerry S]

@Everyone

Espers v0.8.5.3 has been released
The chain will continue to move the way it currently does on PoS until bock 642,000 (sometime tomorrow)
After this however PoW and PoS will equally once again find blocks and the DarkGravityWave will run as it should.
Excuse the inconvenience of this! -- yes that was very drone sounding SORRY! but had to restate this as it is actually corrected now
Also we are excited to announce a new system that has been put into the chain that will ensure blocktimes along with other chain params that are part of the system.

Please NOTE: You do NOT have to re-sync or do anything special. Just run the new client, the server for auto-updates should be back online sometime tomorrow in the meantime PLEASE USE THE LINK BELOW
Alternatively you can download the standalone Windows client here.

Mac client to follow suite, Linux users please re-compile.

Some addnodes while the servers are in maintenance

Code:

addnode=104.236.150.155:22448
addnode=104.237.0.79:22448
addnode=107.170.212.222:22448
addnode=120.24.217.96:22448
addnode=144.76.237.39:22448
addnode=146.185.153.196:22448
addnode=188.68.49.137:22448
addnode=199.26.184.214:22448
addnode=208.68.36.6:22448
addnode=217.175.119.126:22448
addnode=24.228.192.97:22448
addnode=46.101.188.194:22448
addnode=5.157.115.132:22448
addnode=85.145.32.75:22448
addnode=91.121.77.74:22448

If you are on a fork you don't necessarily need to reload the blockchain.
It may reorganise itself, provided you are on the latest client.

^^ this the client should re-index you over a period of time.

nice its syncing now, POW have started again?

[CryptoCoderz]

@Everyone

Espers v0.8.5.3 has been released
The chain will continue to move the way it currently does on PoS until bock 642,000 (sometime tomorrow)
After this however PoW and PoS will equally once again find blocks and the DarkGravityWave will run as it should.
Excuse the inconvenience of this! -- yes that was very drone sounding SORRY! but had to restate this as it is actually corrected now
Also we are excited to announce a new system that has been put into the chain that will ensure blocktimes along with other chain params that are part of the system.

Please NOTE: You do NOT have to re-sync or do anything special. Just run the new client, the server for auto-updates should be back online sometime tomorrow in the meantime PLEASE USE THE LINK BELOW
Alternatively you can download the standalone Windows client here.

Mac client to follow suite, Linux users please re-compile.

Some addnodes while the servers are in maintenance

Code:

addnode=104.236.150.155:22448
addnode=104.237.0.79:22448
addnode=107.170.212.222:22448
addnode=120.24.217.96:22448
addnode=144.76.237.39:22448
addnode=146.185.153.196:22448
addnode=188.68.49.137:22448
addnode=199.26.184.214:22448
addnode=208.68.36.6:22448
addnode=217.175.119.126:22448
addnode=24.228.192.97:22448
addnode=46.101.188.194:22448
addnode=5.157.115.132:22448
addnode=85.145.32.75:22448
addnode=91.121.77.74:22448

If you are on a fork you don't necessarily need to reload the blockchain.
It may reorganise itself, provided you are on the latest client.

^^ this the client should re-index you over a period of time.

nice its syncing now, POW have started again?

block 642,000 will yes

[Charloz24]

@Everyone

Espers v0.8.5.3 has been released
The chain will continue to move the way it currently does on PoS until block 642,000 (sometime tomorrow)
After this however PoW and PoS will equally once again find blocks and the DarkGravityWave will run as it should.
Excuse the inconvenience of this! -- yes that was very drone sounding SORRY! but had to restate this as it is actually corrected now
Also we are excited to announce a new system that has been put into the chain that will ensure blocktimes along with other chain params that are part of the system.

Please NOTE: You do NOT have to re-sync or do anything special. Just run the new client, the server for auto-updates should be back online sometime tomorrow in the meantime PLEASE USE THE LINK BELOW
Alternatively you can download the standalone Windows client here.

Mac client to follow suite, Linux users please re-compile.

Some addnodes while the servers are in maintenance

Code:

addnode=104.236.150.155:22448
addnode=104.237.0.79:22448
addnode=107.170.212.222:22448
addnode=120.24.217.96:22448
addnode=144.76.237.39:22448
addnode=146.185.153.196:22448
addnode=188.68.49.137:22448
addnode=199.26.184.214:22448
addnode=208.68.36.6:22448
addnode=217.175.119.126:22448
addnode=24.228.192.97:22448
addnode=46.101.188.194:22448
addnode=5.157.115.132:22448
addnode=85.145.32.75:22448
addnode=91.121.77.74:22448

If you are on a fork you don't necessarily need to reload the blockchain.
It may reorganise itself, provided you are on the latest client.

^^ this the client should re-index you over a period of time.

nice its syncing now, POW have started again?

Answer is in your own quote 

[Jerry S]

@Everyone

Espers v0.8.5.3 has been released
The chain will continue to move the way it currently does on PoS until block 642,000 (sometime tomorrow)
After this however PoW and PoS will equally once again find blocks and the DarkGravityWave will run as it should.
Excuse the inconvenience of this! -- yes that was very drone sounding SORRY! but had to restate this as it is actually corrected now
Also we are excited to announce a new system that has been put into the chain that will ensure blocktimes along with other chain params that are part of the system.

Please NOTE: You do NOT have to re-sync or do anything special. Just run the new client, the server for auto-updates should be back online sometime tomorrow in the meantime PLEASE USE THE LINK BELOW
Alternatively you can download the standalone Windows client here.

Mac client to follow suite, Linux users please re-compile.

Some addnodes while the servers are in maintenance

Code:

addnode=104.236.150.155:22448
addnode=104.237.0.79:22448
addnode=107.170.212.222:22448
addnode=120.24.217.96:22448
addnode=144.76.237.39:22448
addnode=146.185.153.196:22448
addnode=188.68.49.137:22448
addnode=199.26.184.214:22448
addnode=208.68.36.6:22448
addnode=217.175.119.126:22448
addnode=24.228.192.97:22448
addnode=46.101.188.194:22448
addnode=5.157.115.132:22448
addnode=85.145.32.75:22448
addnode=91.121.77.74:22448

If you are on a fork you don't necessarily need to reload the blockchain.
It may reorganise itself, provided you are on the latest client.

^^ this the client should re-index you over a period of time.

nice its syncing now, POW have started again?

Answer is in your own quote 

yes, sorry, my client stuck from block 637000, i dont know what blocks are we on now

[Hangterisaan]

If you are on a fork you don't necessarily need to reload the blockchain.
It may reorganise itself, provided you are on the latest client.

Any link to the latest?

[Hangterisaan]

If you are on a fork you don't necessarily need to reload the blockchain.
It may reorganise itself, provided you are on the latest client.

Any link to the latest?

NVM lol, just saw it in the above post.

[BelgianBoy]

If you are on a fork you don't necessarily need to reload the blockchain.
It may reorganise itself, provided you are on the latest client.

Any link to the latest?

If you mean latest patch here you go: https://mega.nz/#!plNECYCT!NWuYaIWdhCd7PT08BapX16vr844B2kaAvIe6nwjqVuA

[Charloz24]

@Everyone

Espers v0.8.5.3 has been released
The chain will continue to move the way it currently does on PoS until block 642,000 (sometime tomorrow)
After this however PoW and PoS will equally once again find blocks and the DarkGravityWave will run as it should.
Excuse the inconvenience of this! -- yes that was very drone sounding SORRY! but had to restate this as it is actually corrected now
Also we are excited to announce a new system that has been put into the chain that will ensure blocktimes along with other chain params that are part of the system.

Please NOTE: You do NOT have to re-sync or do anything special. Just run the new client, the server for auto-updates should be back online sometime tomorrow in the meantime PLEASE USE THE LINK BELOW
Alternatively you can download the standalone Windows client here.

Mac client to follow suite, Linux users please re-compile.

Some addnodes while the servers are in maintenance

Code:

addnode=104.236.150.155:22448
addnode=104.237.0.79:22448
addnode=107.170.212.222:22448
addnode=120.24.217.96:22448
addnode=144.76.237.39:22448
addnode=146.185.153.196:22448
addnode=188.68.49.137:22448
addnode=199.26.184.214:22448
addnode=208.68.36.6:22448
addnode=217.175.119.126:22448
addnode=24.228.192.97:22448
addnode=46.101.188.194:22448
addnode=5.157.115.132:22448
addnode=85.145.32.75:22448
addnode=91.121.77.74:22448

If you are on a fork you don't necessarily need to reload the blockchain.
It may reorganise itself, provided you are on the latest client.

^^ this the client should re-index you over a period of time.

nice its syncing now, POW have started again?

Answer is in your own quote  

yes, sorry, my client stuck from block 637000, i dont know what blocks are we on now

For those that missed the link.

[CryptoCoderz]

Updated ANN with standalone link for now. Updater system will be re-linked after server updates.