How will this change the world of mining?? GTX 1080 / 1070

[go6ooo1212]

Ok , so 195mh with 6 x1070 1700/4800 , only one card is at1700/4500 , tdp 65%-  gpu claymore miner 950w at the wall!

Pretty nice score , please tell us more details:
OS , driver , model of cards , settings

[1714251547]

1714251547

[1714251547]

1714251547

[1714251547]

1714251547

[1714251547]

1714251547

[PovertyByte]

What are the dual mining settings for with Decred or Sia?

Are these both GPU clock based coins, and what is the hash rate on a 50% TDP?


When I was dualing with LBRY I saw it as absolutely pointless to mine at 50% TDP and than it seemed like with the power limit cranked up to where I would single mine LBRY I was best off putting the DCRI all the way up

[liomojo1]

Operating system is windows 7 driver 372.54 , stopped using msi afterburn, crashing system! Settings using nvidia inspector are tdp 65% temp 70 , mem clock 900 , gpu clock -150, 195 mgh all , cause , card 1 can't make it 😞 above 650+ mem clock and card 3 is a bit unstable after 900+ mem clock 920watt at the wall! Cards are MSI GeForce® GTX 1070 AERO OC, 8GB GDDR5 , Samsung ram which is outrageously good!
By the way what do you think is best to mine now with these babies?

[klondike_bar]

Operating system is windows 7 driver 372.54 , stopped using msi afterburn, crashing system! Settings using nvidia inspector are tdp 65% temp 70 , mem clock 900 , gpu clock -150, 195 mgh all , cause , card 1 can't make it 😞 above 650+ mem clock and card 3 is a bit unstable after 900+ mem clock 920watt at the wall! Cards are MSI GeForce® GTX 1070 AERO OC, 8GB GDDR5 , Samsung ram which is outrageously good!
By the way what do you think is best to mine now with these babies?

the strix 1070 gaming is similar. 700-800 memory OC and 200-220 core OC were at the upper end of what was stable and provide 290-300MH 

[Hamliss]

33mh ETH * 2000/4800 , 65 temp. 1070 gtx , Samsung ddr!

That is pretty nice, I think this videocards can chance the world of mining for a bit because of the fact that they are so good and also not super expensive if you know what you can do with it.

That is good hash rate and efficiency. But the nVidia cards are too expensive. That is almost twice the cost of 470.

[fredeq]

Operating system is windows 7 driver 372.54 , stopped using msi afterburn, crashing system! Settings using nvidia inspector are tdp 65% temp 70 , mem clock 900 , gpu clock -150, 195 mgh all , cause , card 1 can't make it 😞 above 650+ mem clock and card 3 is a bit unstable after 900+ mem clock 920watt at the wall! Cards are MSI GeForce® GTX 1070 AERO OC, 8GB GDDR5 , Samsung ram which is outrageously good!
By the way what do you think is best to mine now with these babies?

the strix 1070 gaming is similar. 700-800 memory OC and 200-220 core OC were at the upper end of what was stable and provide 290-300MH 

And I am uncomfortable with OCing the memory by 500
Sadly mine doesnt want to run at +200 core below 75% TDP. So far testing 170.

[hiddensphinx]

PSA: GTX 1070 owners

Firmware fix for Micron memory issues are on the way! 

http://www.guru3d.com/news-story/manufacturers-roll-out-firmware-updates-for-geforce-gtx-1070-due-to-memory-issue.html

[giagge]

Its my result with 2x gtx 1070 on zcash , use https://www.dropbox.com/s/yo56dwlqnm0dndh/zcashclient-0.1.0.tar.gz?dl=0 :

I have try this , all on windows 10 x64 , driver whql 375 .

2 gtx 1070 with this config
devices =        ["1", "1", "1", "1", "1"];



1 gtx 1070 with this config
devices =        ["1", "0", "0", "0", "0"];



2 x gtx 1070 but launch 2 istance with this config
1x devices =        ["1", "0", "0", "0", "0"];
2x devices =        ["0", "1", "0", "0", "0"];



.

[pallas]

original link of that miner please?

[giagge]

original link of that miner please?

This:

https://bitcointalk.org/index.php?topic=1660023.0

Try All , and share result .

I want a nvidia gpu miner for windows 10 x64 with stratum and pool support , zcash exit very soon , 28/10/2016 .

[Amph]

that explain why with 6 gpu you get 3 sol, and with 1 20, basically the miner read only 1 gpu at time, and you need to launch multiple instances

it was the same thing with sia miner from klaus, need to be fixed

[giagge]

that explain why with 6 gpu you get 3 sol, and with 1 20, basically the miner read only 1 gpu at time, and you need to launch multiple instances

it was the same thing with sia miner from klaus, need to be fixed

Exactly , and we need a nvdia gpu miner windows 10 x64 for suprnova pool .

[_javi_]

fixed miner, 20-23 sols each gpu, on multiple gpu rig. (gigabyte 1070G1).

now we wait for suprnova news..

[giagge]

fixed miner, 20-23 sols each gpu, on multiple gpu rig. (gigabyte 1070G1).

now we wait for suprnova news..

Thanks , you send your config.txt ? i have error with new version 1.1 .

[Amph]

fixed miner, 20-23 sols each gpu, on multiple gpu rig. (gigabyte 1070G1).

now we wait for suprnova news..

the multiple gpu issue is fixed? where the new version with the fix?

[_javi_]

fixed miner, 20-23 sols each gpu, on multiple gpu rig. (gigabyte 1070G1).

now we wait for suprnova news..

Thanks , you send your config.txt ? i have error with new version 1.1 .

i only changed amd for nvidia on default config

[_javi_]

fixed miner, 20-23 sols each gpu, on multiple gpu rig. (gigabyte 1070G1).

now we wait for suprnova news..

the multiple gpu issue is fixed? where the new version with the fix?

it´s there on its thread.. pm if you need it

[Amph]

fixed miner, 20-23 sols each gpu, on multiple gpu rig. (gigabyte 1070G1).

now we wait for suprnova news..

the multiple gpu issue is fixed? where the new version with the fix?

it´s there on its thread.. pm if you need it

found it, now there is another problem, with heavy cpu load, at least for me

[go6ooo1212]

Which kind of CPU are you with , on your rig...

[_javi_]

Sempron 145, 4gb.. i didnt notice any lag or delay, even on a remote session.