[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[citronick]

try this

1. remove "-mode 0"
2. replace "-dcoin decred"
3. add "-allpools 1" at the end of line

Thank you. I tried it, but the problem persists: ETH mining is ok, but DCR shows "Job timeout" 

Here is mine and its alive.

Dual mining is brutal on GPU and CPU, so lowest mining on ETH but maximum speed on DCR.

-dbg -1  -wd 1 -r 1 -mport -3333  -estale 1 -esm 1 -ethi 0  -epool asia1.ethpool.org:3333 -ewal <yourETHaddress>.$rigName -esm 0 -epsw x -allpools 1 -mport -3333  -dpool stratum+tcp://decred.hk.nicehash.com:3354 -dwal <yourBTCaddress>.$rigName -dpsw x -dcoin dcr -dcri 80 -dcrt 1

[1714529695]

1714529695

[1714529695]

1714529695

[1714529695]

1714529695

[xleejohnx]

try this

1. remove "-mode 0"
2. replace "-dcoin decred"
3. add "-allpools 1" at the end of line

Thank you. I tried it, but the problem persists: ETH mining is ok, but DCR shows "Job timeout" 

Here is mine and its alive.

Dual mining is brutal on GPU and CPU, so lowest mining on ETH but maximum speed on DCR.

-dbg -1  -wd 1 -r 1 -mport -3333  -estale 1 -esm 1 -ethi 0  -epool asia1.ethpool.org:3333 -ewal <yourETHaddress>.$rigName -esm 0 -epsw x -allpools 1 -mport -3333  -dpool stratum+tcp://decred.hk.nicehash.com:3354 -dwal <yourBTCaddress>.$rigName -dpsw x -dcoin dcr -dcri 80 -dcrt 1

hows the rejected shares on the decred hk pool?

[fittsy]

hows the rejected shares on the decred hk pool?

At -dcri 80 I think they are pretty high. Like 1.5%.

I lowered mine but I may push it back up just because DCR price is so darn high.

I find suprnova no likey high DCRI when you start. Raise the DCRI gradually after the miner has been running for a few minutes. So start at 20 then go to 30, 40, etc.

If I started with a high DCRI on suprnova I get a dozen fast rejects and kicked from the server, then it tries again. (Not sure if this info helps you if you use HK pool but it might help you debug.)

[IOTUSA]

Quick question. Did I just randomly lose my mind today, or did the Simplemining interface just start showing zcash mining with Claymore 12.4 in 'MH/s' instead of 'KH's'? It does in my interface for some reason.

[carloshell]

Quick question. Did I just randomly lose my mind today, or did the Simplemining interface just start showing zcash mining with Claymore 12.4 in 'MH/s' instead of 'KH's'? It does in my interface for some reason.

You are right, it's in MH/s!

[citronick]

Quick question. Did I just randomly lose my mind today, or did the Simplemining interface just start showing zcash mining with Claymore 12.4 in 'MH/s' instead of 'KH's'? It does in my interface for some reason.

if not mistaken, you can change this to MH from KH and vice-versa, in ethman utility in Claymore monitoring dashboard.

[valkir]

Quick question for OP, maybe it was already asked but did you ever consider adding the multi-algo nicehash miner ? 

[tytanick]

Quick question for OP, maybe it was already asked but did you ever consider adding the multi-algo nicehash miner ? 

I think its is what you are looking for
https://tytanick.tinytake.com/sf/MTQ1NjExNF81MTY2NjY1

[IOTUSA]

Quick question. Did I just randomly lose my mind today, or did the Simplemining interface just start showing zcash mining with Claymore 12.4 in 'MH/s' instead of 'KH's'? It does in my interface for some reason.

if not mistaken, you can change this to MH from KH and vice-versa, in ethman utility in Claymore monitoring dashboard.

This was for zcash mining, and I can guarantee I do not mine at MH/s

[citronick]

Hello T

Is there a way to put failover pools in epools.text automatically for Claymore ETH ?

Currently sgminer-GM ETH you can define failover pools in the same command line BUT for Claymore need to update the epools.text file.

Maeby..... put up to 3 failover pools in data entry field like what you did for BTC/ETH/SIA address?

What say you?

Thanks
Citronick

[citronick]

Quick question for OP, maybe it was already asked but did you ever consider adding the multi-algo nicehash miner ? 

I think its is what you are looking for
https://tytanick.tinytake.com/sf/MTQ1NjExNF81MTY2NjY1

Anyone knows sgminer scripts that can do auto switching / mining to most profitable coin when a certain profitability level is reached?

[xleejohnx]

Quick question for OP, maybe it was already asked but did you ever consider adding the multi-algo nicehash miner ? 

I think its is what you are looking for
https://tytanick.tinytake.com/sf/MTQ1NjExNF81MTY2NjY1

Anyone knows sgminer scripts that can do auto switching / mining to most profitable coin when a certain profitability level is reached?

https://bitcointalk.org/index.php?topic=769239.0

I think something like this would set smOS to the next level

[seitrox]

Hey, I started using this OS today. I like it so far i just ran into a few issues. First off all i upgraded to the beta which boots and works so far. I noticed however, that when i run the sgminer-gm5.5.5 on ethereum the commandline shows me mining speeds of upto 60mhs per card (i did not test this miner bevore i upgraded to beta tho, might be fine there i will try that out later), it finds no shares at all and then one of the cards gets shutdown cuz of idling. Also why can't i use ethermine.org for eth mining, I get constantly disconnected from the server? Apart from that nice work if i can get my cards to hash at my windows speeds ill likely stay on the os !

[tytanick]

Hey, I started using this OS today. I like it so far i just ran into a few issues. First off all i upgraded to the beta which boots and works so far. I noticed however, that when i run the sgminer-gm5.5.5 on ethereum the commandline shows me mining speeds of upto 60mhs per card (i did not test this miner bevore i upgraded to beta tho, might be fine there i will try that out later), it finds no shares at all and then one of the cards gets shutdown cuz of idling. Also why can't i use ethermine.org for eth mining, I get constantly disconnected from the server? Apart from that nice work if i can get my cards to hash at my windows speeds ill likely stay on the os !

Better use claymore miner what are you mining ?

[seitrox]

Hey, I started using this OS today. I like it so far i just ran into a few issues. First off all i upgraded to the beta which boots and works so far. I noticed however, that when i run the sgminer-gm5.5.5 on ethereum the commandline shows me mining speeds of upto 60mhs per card (i did not test this miner bevore i upgraded to beta tho, might be fine there i will try that out later), it finds no shares at all and then one of the cards gets shutdown cuz of idling. Also why can't i use ethermine.org for eth mining, I get constantly disconnected from the server? Apart from that nice work if i can get my cards to hash at my windows speeds ill likely stay on the os !

Better use claymore miner what are you mining ?

I just wanted to try mining eth on the sgminer-gm, since i couldnt get the speeds i wanted with the sg-miner on my own install of ubuntu so i figured trying it here. I now use the claymore miner but it still wont let me use the ethermine.org site. Can you explain why that is ?

[fittsy]

Quick question for OP, maybe it was already asked but did you ever consider adding the multi-algo nicehash miner ? 

I think its is what you are looking for
https://tytanick.tinytake.com/sf/MTQ1NjExNF81MTY2NjY1

Anyone knows sgminer scripts that can do auto switching / mining to most profitable coin when a certain profitability level is reached?

https://bitcointalk.org/index.php?topic=769239.0

I think something like this would set smOS to the next level

Why? Switching to most profitable coin usually means you're already too late. You want to mine before the pump, not during the pump.  Maybe Citronick with his 30 rigs can still make money but most of us smaller miners can't. By the time we mine and go to sell that coin isn't most profitable any more.

Better to play specific coins that have proven returns or speculate on a coin while it's still cheap and profit when the pump comes.

[tytanick]

https://bitcointalk.org/index.php?topic=769239.0
I think something like this would set smOS to the next level

First things first. But auto switching causes too many problems and WONT be implemented any soon. I have already big list and i dont want to add and add more things to it
Propably what i could implement is some informations from whattomine or other services. After my OS will have some more important functions i will think about this also.
Right now i am still busy with those fcking cables for SRRv1 (once SSRv2 will be released i will have much more time because now i am helping my girfriend with those cables. It is masacre, each cable takes 7 minute to make it
Anyway after that i will TRY TO IMPLEMENT this nice looking dashboard, see this below
Example: https://simplemining.net/inspinia/
Once i will migrate all functions to this, i will make grouping feature thich is right now most wanted.
I was thinking many days about rig grouping function..... First i wanted to do this in very simple way but after few days i realised that i want to do this in better way.
Anyway it needed more time to do and then i saw this beautifull dashboard which i told myself that i must have this !!
Anyway you guys think its nice right ?

[Talat10gu]

https://bitcointalk.org/index.php?topic=769239.0
I think something like this would set smOS to the next level

First things first. But auto switching causes too many problems and WONT be implemented any soon. I have already big list and i dont want to add and add more things to it
Propably what i could implement is some informations from whattomine or other services. After my OS will have some more important functions i will think about this also.
Right now i am still busy with those fcking cables for SRRv1 (once SSRv2 will be released i will have much more time because now i am helping my girfriend with those cables. It is masacre, each cable takes 7 minute to make it
Anyway after that i will TRY TO IMPLEMENT this nice looking dashboard, see this below
Example: https://simplemining.net/inspinia/
Once i will migrate all functions to this, i will make grouping feature thich is right now most wanted.
I was thinking many days about rig grouping function..... First i wanted to do this in very simple way but after few days i realised that i want to do this in better way.
Anyway it needed more time to do and then i saw this beautifull dashboard which i told myself that i must have this !!
Anyway you guys think its nice right ?

Nice interface man 
I am excitedly waiting for you to release the group function

[xleejohnx]

Quick question for OP, maybe it was already asked but did you ever consider adding the multi-algo nicehash miner ? 

I think its is what you are looking for
https://tytanick.tinytake.com/sf/MTQ1NjExNF81MTY2NjY1

Anyone knows sgminer scripts that can do auto switching / mining to most profitable coin when a certain profitability level is reached?

https://bitcointalk.org/index.php?topic=769239.0

I think something like this would set smOS to the next level

Why? Switching to most profitable coin usually means you're already too late. You want to mine before the pump, not during the pump.  Maybe Citronick with his 30 rigs can still make money but most of us smaller miners can't. By the time we mine and go to sell that coin isn't most profitable any more.

Better to play specific coins that have proven returns or speculate on a coin while it's still cheap and profit when the pump comes.

Me and citronik sell at nicehash.
When things start pumping people start renting

[IOTUSA]

https://bitcointalk.org/index.php?topic=769239.0
I think something like this would set smOS to the next level

First things first. But auto switching causes too many problems and WONT be implemented any soon. I have already big list and i dont want to add and add more things to it
Propably what i could implement is some informations from whattomine or other services. After my OS will have some more important functions i will think about this also.
Right now i am still busy with those fcking cables for SRRv1 (once SSRv2 will be released i will have much more time because now i am helping my girfriend with those cables. It is masacre, each cable takes 7 minute to make it
Anyway after that i will TRY TO IMPLEMENT this nice looking dashboard, see this below
Example: https://simplemining.net/inspinia/
Once i will migrate all functions to this, i will make grouping feature thich is right now most wanted.
I was thinking many days about rig grouping function..... First i wanted to do this in very simple way but after few days i realised that i want to do this in better way.
Anyway it needed more time to do and then i saw this beautifull dashboard which i told myself that i must have this !!
Anyway you guys think its nice right ?

This so much. I would kill (ants, or possibly small rodents) for a simple feature that allows easy grouping of miners so that I can easily bring up new miners, and switch algorithm on separate or grouped miners without rebooting the whole batch. In lieu of you wanting animals killed I would also pay for it.

If anyone here knows of a way to use a single email (account) and get a view of all miners while grouping them to allow multiple algorithms to be mined and miners to be controlled in smaller groups I would appreciate any input.