[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[c-none]

I think I will skip to PiMP after this no-support from SMOS.

[logicassets]

SMOS is constantly resetting miner and rig after installing 7th GPU.

Any ideas? How to fix this issue?

It was working fine with 4 GPUs but when I plugged 7 in total, it's resetting the GPUs constantly.

Any help is appreciated, thanks a lot!

replace risers
in 90% - help!
have 6 rigs with differents gpus fom 8 to 12 each

many times i constcuct new rigs, i have situation as you describe - at the end always solutions was - replace risers or replace pci-e splitter

LOL same risers work under Windows.

LOL the same risers under Windows you're complaining about in the MSI Afterburner thread?  

Hi there, I am having a weird issue.

I have Win10 installed and fully updated to latest stable one.
On this rig I use 7 x 1080TI cards however a few hours later I start the windows, some GPUs randomly drops from MSI Afterburner and becomes uncontrollable like in the image.

Image: https://ibb.co/ciFZ3R

You can see that 1st GPU dropped now. It happens randomly and this is really boring.

Anyone can have a solution for me?

Thanks a lot.

[c-none]

SMOS is constantly resetting miner and rig after installing 7th GPU.

Any ideas? How to fix this issue?

It was working fine with 4 GPUs but when I plugged 7 in total, it's resetting the GPUs constantly.

Any help is appreciated, thanks a lot!

replace risers
in 90% - help!
have 6 rigs with differents gpus fom 8 to 12 each

many times i constcuct new rigs, i have situation as you describe - at the end always solutions was - replace risers or replace pci-e splitter

LOL same risers work under Windows.

LOL the same risers under Windows you're complaining about in the MSI Afterburner thread?  

Hi there, I am having a weird issue.

I have Win10 installed and fully updated to latest stable one.
On this rig I use 7 x 1080TI cards however a few hours later I start the windows, some GPUs randomly drops from MSI Afterburner and becomes uncontrollable like in the image.

Image: https://ibb.co/ciFZ3R

You can see that 1st GPU dropped now. It happens randomly and this is really boring.

Anyone can have a solution for me?

Thanks a lot.

So you genius guy think MSI Afterburner issue is related to risers?  

[logicassets]

SMOS is constantly resetting miner and rig after installing 7th GPU.

Any ideas? How to fix this issue?

It was working fine with 4 GPUs but when I plugged 7 in total, it's resetting the GPUs constantly.

Any help is appreciated, thanks a lot!

replace risers
in 90% - help!
have 6 rigs with differents gpus fom 8 to 12 each

many times i constcuct new rigs, i have situation as you describe - at the end always solutions was - replace risers or replace pci-e splitter

LOL same risers work under Windows.

LOL the same risers under Windows you're complaining about in the MSI Afterburner thread?  

Hi there, I am having a weird issue.

I have Win10 installed and fully updated to latest stable one.
On this rig I use 7 x 1080TI cards however a few hours later I start the windows, some GPUs randomly drops from MSI Afterburner and becomes uncontrollable like in the image.

Image: https://ibb.co/ciFZ3R

You can see that 1st GPU dropped now. It happens randomly and this is really boring.

Anyone can have a solution for me?

Thanks a lot.

So you genius guy think MSI Afterburner issue is related to risers?  

So you think it's not? 

[Blynda]

Hello can anyone share their overcloack settings on rx 580 8gb ? Because all i can get is 28.5 mh/s and almost 140w from wall each card, i think it's too much power consumption , because on windows I was able to something like 120w .

[naeme18720]

hi

please please please

confight softward XMR-Stak-AMD in site

http://pool.electroneum.space/#getting_started

write this here for  simplemining.net OS

please please

i can not  connection...

[slajfo]

Today i tried XMR-Stak-AMD for Electroneum and connection works, also with ClaymoreXMR.. but i had it little bit unstable on my 6x RX 580 rig with SMOS so i go back to Claymore-ETH.


Edit: is there some news about VEGA support in future releases?

[twofreckles]

hi

please please please

confight softward XMR-Stak-AMD in site

http://pool.electroneum.space/#getting_started

write this here for  simplemining.net OS

please please

i can not  connection...

Most probably you couldn't connect because it was done. I faced the same problem and at the end just connected to:
https://easyhash.io

[naeme18720]

hi

please please please

confight softward XMR-Stak-AMD in site

http://pool.electroneum.space/#getting_started

write this here for  simplemining.net OS

please please

i can not  connection...

Most probably you couldn't connect because it was done. I faced the same problem and at the end just connected to:
https://easyhash.io

Ok
Please

confight softward XMR-Stak-AMD in site
https://easyhash.io
I want for used OS this code
Please help for code mining in xmr stake amd

[naeme18720]

Today i tried XMR-Stak-AMD for Electroneum and connection works, also with ClaymoreXMR.. but i had it little bit unstable on my 6x RX 580 rig with SMOS so i go back to Claymore-ETH.


Edit: is there some news about VEGA support in future releases?

Hi
Please share confight xmr stake for amd in os

[DunePilot]

Today i tried XMR-Stak-AMD for Electroneum and connection works, also with ClaymoreXMR.. but i had it little bit unstable on my 6x RX 580 rig with SMOS so i go back to Claymore-ETH.


Edit: is there some news about VEGA support in future releases?

I got SGMiner and ClaymoreXMR working with my RX 580s but the ClaymoreXMR was very unstable no matter what settings I did... it got much better hashrate but was not stable at all. You went back to Claymore ETH to mine ETH stuff or you got it working for Electroneum too?

Do you or anyone else know how to run 2 threads with SGMiner in SM OS?

You would typically do the following in windows

"rawintensity": "512",
            "worksize": "4",
            "gpu-threads": "2"

I tried -g 2 to try to get it use 2 threads but it didn't work so I'm just doing  raw 1008 worksize 8 threads 1

[dawidt]

nice work Tytanick, best mining OS ever made.

best regards

[mfsmarques]

Today i tried XMR-Stak-AMD for Electroneum and connection works, also with ClaymoreXMR.. but i had it little bit unstable on my 6x RX 580 rig with SMOS so i go back to Claymore-ETH.


Edit: is there some news about VEGA support in future releases?

I got SGMiner and ClaymoreXMR working with my RX 580s but the ClaymoreXMR was very unstable no matter what settings I did... it got much better hashrate but was not stable at all. You went back to Claymore ETH to mine ETH stuff or you got it working for Electroneum too?

Do you or anyone else know how to run 2 threads with SGMiner in SM OS?

You would typically do the following in windows

"rawintensity": "512",
            "worksize": "4",
            "gpu-threads": "2"

I tried -g 2 to try to get it use 2 threads but it didn't work so I'm just doing  raw 1008 worksize 8 threads 1

To use 2 threads in sgminer, download the new beta version of SMOS.

http://download.simplemining.net/beta/

[c-none]

SMOS is constantly resetting miner and rig after installing 7th GPU.

Any ideas? How to fix this issue?

It was working fine with 4 GPUs but when I plugged 7 in total, it's resetting the GPUs constantly.

Any help is appreciated, thanks a lot!

replace risers
in 90% - help!
have 6 rigs with differents gpus fom 8 to 12 each

many times i constcuct new rigs, i have situation as you describe - at the end always solutions was - replace risers or replace pci-e splitter

LOL same risers work under Windows.

LOL the same risers under Windows you're complaining about in the MSI Afterburner thread?  

Hi there, I am having a weird issue.

I have Win10 installed and fully updated to latest stable one.
On this rig I use 7 x 1080TI cards however a few hours later I start the windows, some GPUs randomly drops from MSI Afterburner and becomes uncontrollable like in the image.

Image: https://ibb.co/ciFZ3R

You can see that 1st GPU dropped now. It happens randomly and this is really boring.

Anyone can have a solution for me?

Thanks a lot.

So you genius guy think MSI Afterburner issue is related to risers?  

So you think it's not? 

Yes it's not related to risers, because I've fixed the issue now and everything works perfect, LOL.

[ledio]

Can anyone give me .bat for EWBF mining BTG on supernova? Problem is supernova have username and password to login on pool

[wl04]

Hello guys! I need advice from experienced SMOS users. Atm im trying to migrate to SMOS from Windows 10 and everything is perfect but the performance. My rigs are based on bios modded RX570's and under Win 10 I can pull 30mh/s but on SMOS after all my attempts I can't go higher than 26.5mh/s.

My Claymore settings are:

-wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -allpools 1 -mport -3333 -asm 1 -powlim 30 -mode 1 -ethi 16 -dcri 10

and my Overclocking settings are:

Core: 1100, mem 2100, undervolt 985, powerstage 7

Can anyone help me with configuration?
Also no matter what I set as core cloak it shows 1041 Mhz in monitoring... also power stage doesn't seem to work? Is there a solution or Pimp /EthOS is the way to go?

[elgar]

Hello! I have a rig of six RX570 cards. One of them is MSI rx570 armor 4Gb. - When I try to overclock, it lowers hashrate. Even when I put default setting for the memory clock (1750) for this card, it doesn't change it. When I don't put any values in the overclocking section, it gives me the default hashrate 22-23 Mhs. All other cards give me hashrates of 28-29 Mhs when overclocked. Is there a way to make this card to give me higher hashrates in simplemining os? In Windows 10 I get 28 Mhs out of this MSI card.

[DS-M]

Hello Fellow users.

Already some update on using claymore equihash on Zpool.ca ?
In the beginning it starts hashing, and that seems wonderfull, but then claymore stops on mining, but the miners are registered on Zpool.ca .
Looking on the board here, it seems claymore is not yet functional on zpool.ca , and those supporting it, are investigating.

So far i managed to get an hour or less on hashrate before it goes away..

First i get share found, and after a while, there is no accepted shares, but connection to Zpool.ca is alive.

Anyone got a clue on how fixing Claymore and equihash on zpool.ca ? Anyone managed to get it running ?

Please let me know.


used command line in SMOS :

-zpool stratum+tcp://equihash.mine.zpool.ca:2142 -zwal 1Az2b34CAXoPPfGUZRwEwvvteTXSLha8xw -allpools 1 -zpsw c=btc -asm 3 -i 9 -nofee 1

[DunePilot]

To use 2 threads in sgminer, download the new beta version of SMOS.

http://download.simplemining.net/beta/

Which one rc2 or the other one, what does the rc2 mean?

Once I install this what is the command line string to get it to run 2 threads, is it "-g 2" ?

[mfsmarques]

To use 2 threads in sgminer, download the new beta version of SMOS.

http://download.simplemining.net/beta/

Which one rc2 or the other one, what does the rc2 mean?

Once I install this what is the command line string to get it to run 2 threads, is it "-g 2" ?

RC2 = Release Candidate 2 = New Version

Yes, "-g 2"