[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[carafleur]

Feature Request:

Please would you enable scrolling when viewing the console via the Simplemining.net website?
When you have +12 GPU's, not having the ability to scroll means my clients are unable to see all the info needed when using --peg options when mining Equihash.

4 posts above you have the exact answer to your problem

[Wazkito]

Hi guy's,
Anyone know if the 1070ti is fully supported?
I just bought one to try out and am having an issue.
It runs but the Over Clocking settings have no effect.
Also it seems to not recognize which card it is, see below.
The best and only speed I get is around 26.8 Mh/s

ERROR: Error querying connected displays on GPU 0 (Missing Extension).
ERROR: Error resolving target specification 'gpu:0' (No targets match target specification), specified in query '[gpu:0]/GPUGraphicsClockOffset[3]'.
Available core offset for GPU 0 is in
Applying CoreOffset:
Available power limit for GPU 0 is 90.00 W, 217.00 W
Applying PowerLimit: 217 watt for GPU 0
============ Starting Miner ===============
Binary file (standard input) matches




ETH: 11/26/17-05:57:00 - New job from us2.ethermine.org:4444
ETH - Total Speed: 26.824 Mh/s, Total Shares: 10, Rejected: 0, Time: 00:21
ETH: GPU0 26.824 Mh/s
GPU0 t=60C fan=35%

I have the same issue but in my case SMOS recognizes my card as below

CUDA: Device: 0 GeForce GTX 1070, 8114 MB 1:64

OC only works on Power Limit but no effect on other variables.
Tried fresh install, Sudo apt-get update via Putty but no luck.

Can anyone please help?

[AngelIX]

Are these miners support neoscrypt or nist5 ?
if not is this possible to mine them ?

[Hotmetal]

Feature Request:

Please would you enable scrolling when viewing the console via the Simplemining.net website?
When you have +12 GPU's, not having the ability to scroll means my clients are unable to see all the info needed when using --peg options when mining Equihash.

4 posts above you have the exact answer to your problem

Why would i want to implement a temp solution which will need to be continuously re-applied with every single SMOS update?
Hack jobs are fine when you have 1 or 2 machines.

The feature request was clear: enable scrolling when viewing the console via the Simplemining.net website.

[carafleur]

Feature Request:

Please would you enable scrolling when viewing the console via the Simplemining.net website?
When you have +12 GPU's, not having the ability to scroll means my clients are unable to see all the info needed when using --peg options when mining Equihash.

4 posts above you have the exact answer to your problem

Why would i want to implement a temp solution which will need to be continuously re-applied with every single SMOS update?
Hack jobs are fine when you have 1 or 2 machines.

The feature request was clear: enable scrolling when viewing the console via the Simplemining.net website.

SMOS is simple
Writing a script to modify n rigs and centralize logs would not take a long time

[Hotmetal]

SMOS is simple
Writing a script to modify n rigs and centralize logs would not take a long time

I'm not trying to centralize logs. I'm trying to give my clients the ability to view the simplemining.net CONSOLE button via the web, just with scrolling enabled.

[bitco23]

>>>>>>Repeated Post.... i need reply>>>>>
hi all,
i am mining btg with gtx 1060 6gb.... my hash rate was 1930 sol average,, yesterday i have updated my ssd setting (flash) and after that my hash rate dropped to 1730 average sol.... for ethereum mining my hash rate was 24 mhs per gpu but now it is dropped to 19 mhs........ whats the reason behind this and how to fix it,,, kindly help me, i am waiting

[crypik]

alright, recently all my rigs won't overclock no matter what I do. I tested it on windows and they reach their 22.2 mh/s but on simple mining they get stuck at 18.3 mh/s
changed my ssd, changed ssd to usb, changed risers, changed options on simple mining..

Anyone knows what might be wrong?

[coinbeamer]

OS 1131 no problems, but since os 1132 3 of my rigs wont start - "miner hangs" - no matter what i do nothging works nada :-(

xmr zec eth no matter what miner i use, it wont work :-(


Remove dead screens with 'screen -wipe'.
write: Bad file descriptor
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
GPU0 t=28C fan=47%, GPU1 t=32C fan=47%, GPU2 t=31C fan=47%, GPU3 t=28C fan=47%
GPU0 t=28C fan=47%, GPU1 t=32C fan=47%, GPU2 t=31C fan=47%, GPU3 t=28C fan=47%
GPU0 t=28C fan=47%, GPU1 t=32C fan=47%, GPU2 t=31C fan=47%, GPU3 t=28C fan=47%
GPU0 t=28C fan=47%, GPU1 t=32C fan=47%, GPU2 t=31C fan=47%, GPU3 t=28C fan=47%
Miner thread hangs, need to restart miner!
Binary file (standard input) matches

[Hotmetal]

alright, recently all my rigs won't overclock no matter what I do. I tested it on windows and they reach their 22.2 mh/s but on simple mining they get stuck at 18.3 mh/s
changed my ssd, changed ssd to usb, changed risers, changed options on simple mining..

Anyone knows what might be wrong?

Screenshot of your overclock settings please.

[marimach77]

@tytanick Just one more same question (the previous one was not answered by you). When do you plan to implement this driver http://support.amd.com/en-us/kb-articles/Pages/AMDGPU-Pro-Beta-Mining-Driver-for-Linux-Release-Notes.aspx ?

[tytanick]

@tytanick Just one more same question (the previous one was not answered by you). When do you plan to implement this driver http://support.amd.com/en-us/kb-articles/Pages/AMDGPU-Pro-Beta-Mining-Driver-for-Linux-Release-Notes.aspx ?

Here you have
http://download.simplemining.net/beta/simpleminer-RX-NV-rc2.img.zip

[crypik]

alright, recently all my rigs won't overclock no matter what I do. I tested it on windows and they reach their 22.2 mh/s but on simple mining they get stuck at 18.3 mh/s
changed my ssd, changed ssd to usb, changed risers, changed options on simple mining..

Anyone knows what might be wrong?

Screenshot of your overclock settings please.

 I can guaranty it's not the overclock since I have 220 rigs running just fine with the same settings

100 coreclock , 850 memory clock , 90 pwoer

[deadsix]

@tytanick Just one more same question (the previous one was not answered by you). When do you plan to implement this driver http://support.amd.com/en-us/kb-articles/Pages/AMDGPU-Pro-Beta-Mining-Driver-for-Linux-Release-Notes.aspx ?

Here you have
http://download.simplemining.net/beta/simpleminer-RX-NV-rc2.img.zip

Does the RX NV support hybrid configurations - some AMD and some Nvidia cards on one system???

[AltcoinScamfinder]

Does anyone know what  version and settings  to run for Pandminer (470 version)  with simplemining? So damn  tired of  the Pandaminer  Windows crap
Also, do I use the  dagfix version or  not?

[dj_janker]

Hi,
I would like to know the commands (by ssh) for reload my rigs, please.

Can samebody help me, please?

Thanks

[marimach77]

@tytanick Just one more same question (the previous one was not answered by you). When do you plan to implement this driver http://support.amd.com/en-us/kb-articles/Pages/AMDGPU-Pro-Beta-Mining-Driver-for-Linux-Release-Notes.aspx ?

Here you have
http://download.simplemining.net/beta/simpleminer-RX-NV-rc2.img.zip

Ahh, thanks for updating me. I was not aware of beta folder 

[willi9974]

Hello Miner Friends,

I will tune my cards, but how can i find out which pci-e Port / Riser cable / gpu is which GPU number in simpleminer GPU0, GPU1, ...

Best Regards
Willi

[marimach77]

Hello Miner Friends,

I will tune my cards, but how can i find out which pci-e Port / Riser cable / gpu is which GPU number in simpleminer GPU0, GPU1, ...

Best Regards
Willi

GPU0 should be the first GPU close to CPU socket. Then next is GPU1, etc.

[willi9974]

Ok that sounds easy, but is that in Kind of the Asrock 110 with 13 GPU Spots the same and it is that also nothing to say, on the Asrock H110 i have white and Black GPU sockets