[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[xtreeme99]

I appreciate all the hard work!

Few questions: with same OC settings my rig is fine on ETH but crashes on XMR.. what might be the issue?

Would it be possible to include an auto-algo switching miner? Example (from moneroocean.stream ): modified xmrig: https://github.com/MoneroOcean/xmrig/releases

There's a great CPU-only coin called Nimiq. During this month a GPU miner will be released - is there a change for SMOS to support it, if github will be available?

Thanks!

[steemboatwilly]

[ 556.636115] NVRM: Xid (PCI:0000:04:00): 43, Ch 00000010, engmask 00000101
Rig is rebooting due to system error. It could be caused by too much overclock/undervolt.


This error will not leave not matter what i do.
I am using the latest version of smos mining rvn on z-enemy-v1.22-cuda9.1.
if I mine Music coin, i get no errors, mine rvn and this plagues me.

What other information is needed from me to help resolve this?

Any help or guidance would be awesome.
Thank you

I think the issues is quite evident.

You say this with such arrogance! You dont even know for sure. You can assume because you can READ.
But for all intensive purposes, i traced it back to a power issue related to the PSU.
The settings with in SMOS did not matter. Once i replaced the PSU, the issue has basically gone away.

[Theresatimmy]

Hi how are you? What type of bitcoin miner usually purchase?

[BogdanCo]

[ 556.636115] NVRM: Xid (PCI:0000:04:00): 43, Ch 00000010, engmask 00000101
Rig is rebooting due to system error. It could be caused by too much overclock/undervolt.


This error will not leave not matter what i do.
I am using the latest version of smos mining rvn on z-enemy-v1.22-cuda9.1.
if I mine Music coin, i get no errors, mine rvn and this plagues me.

What other information is needed from me to help resolve this?

Any help or guidance would be awesome.
Thank you

I think the issues is quite evident.

You say this with such arrogance! You dont even know for sure. You can assume because you can READ.
But for all intensive purposes, i traced it back to a power issue related to the PSU.
The settings with in SMOS did not matter. Once i replaced the PSU, the issue has basically gone away.

Dude... there is no arrogance, nobody knows for sure what is the issue from the info you provided, but the bold text points you into the right direction... so as I see it, if you haven't overclocked/undervolted the cards then the next thing I would suspect would be the PSU to see if it has enough juice

[tytanick]

Dashboard update:
- in RigList there is new button near each rig which opens detailed view. This view is refreshing its data every few seconds and it shows all information about current rig. In future we will be adding more and more informations there.
- reload action does not need confirming

[marimach77]

Dashboard update:
- in RigList there is new button near each rig which opens detailed view. This view is refreshing its data every few seconds and it shows all information about current rig. In future we will be adding more and more informations there.
- reload action does not need confirming

Shutdown button appeared nice

[PowerEleven]

Great new dashboard!
Love new "info" window, nice that there is list with GPU position and name. Maybe it is possible to add PCI id info?

For example:

No   Model    Core MHz     Mem MHz   Fan %   Temp *C    PCI
0   GTX 1070           1645     4151           45         63             PCI:0000:01:00
1   GTX 1070           1632     4151           45           62             PCI:0000:03:00
2   GTX 1070           1657     4151           45           61             PCI:0000:02:00
3   GTX 1070           1607     4151           45           66             PCI:0000:04:00



And ofcourse hoping very much to see crashlog function.

Thank you!

Great work!

[bracinac]

Info button is very usefull thing, thank you, but the button itself can be smaller, and for me not bigger than action buttons on the right side.
Cosmetic thing, but now when you take a look at dashboard the first you can see are info buttons.

[ekiller]

  v3075 better !

Just one idea;

I'd like insert unit of energy cost  as  0.11 Kw/hour
and to see   total  energy consumption and cost

it would be great   

[buithanhtung]

Dashboard update:
- in RigList there is new button near each rig which opens detailed view. This view is refreshing its data every few seconds and it shows all information about current rig. In future we will be adding more and more informations there.
- reload action does not need confirming

Such a great dashboard update!

Could you please help deal with shutdown schedule feature? My workaround solution is to execute a shutdown -h script at Startup (/etc/rc.local). But it will be better if we can manage it from the dashboard.

Thank you very much!

[Peto851]

Hello community
I need your help
Guys i use Sapphire RX 580 Nitro(plus) 4GB Hynix Bios for my cards  for 1 year
https://mega.nz/#!gHoGBKDZ!QhNE4j8oZ4VkdiM3xtsHeBoTRiouo75o9UVAOJbh6Lg
But  last weeks many times reboot my rig  cause  this message
Rig is rebooting due to system error. It could be caused by too much overclock/undervolt.

Always was  works great (30+ MH/s + undervolt), but now my rig reboot  after couple hours
I can not explain it
This ROM has a recommended driver 17.30.1029
https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx

But I can feel that something has changed on the Simpleminning side.
And now my ROM does not work as before
All components are in order (stock rom works without failures)
Does anyone have any advice for me to solve it?
Is there any new ROM version for Saphire RX580 4GB(elpida) cards that work correctly with Simpleminning OS ?

[Mlever]

First of all, thanks for the great software, it easily runs stable for months at a time which saves so much time. Anyway, is there any chance of supporting the new Ubqminer before the fork?

https://github.com/ubiq/ubqminer/releases

[BogdanCo]

Hello community
I need your help
Guys i use Sapphire RX 580 Nitro(plus) 4GB Hynix Bios for my cards  for 1 year
https://mega.nz/#!gHoGBKDZ!QhNE4j8oZ4VkdiM3xtsHeBoTRiouo75o9UVAOJbh6Lg
But  last weeks many times reboot my rig  cause  this message
Rig is rebooting due to system error. It could be caused by too much overclock/undervolt.

Always was  works great (30+ MH/s + undervolt), but now my rig reboot  after couple hours
I can not explain it
This ROM has a recommended driver 17.30.1029
https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx

But I can feel that something has changed on the Simpleminning side.
And now my ROM does not work as before
All components are in order (stock rom works without failures)
Does anyone have any advice for me to solve it?
Is there any new ROM version for Saphire RX580 4GB(elpida) cards that work correctly with Simpleminning OS ?

Check PSU, how many cards do you have on it? What are your settings (core, memory, mV) for mining, I presume ETH? Are you using them in the same conditions (winter, summer)?

[Demented247]

Dashboard update:
- in RigList there is new button near each rig which opens detailed view. This view is refreshing its data every few seconds and it shows all information about current rig. In future we will be adding more and more informations there.
- reload action does not need confirming

Please add xmrig amd 2.8.6

https://github.com/xmrig/xmrig-amd/releases

Improved cn-heavy, cn-heavy/xhv perfomance up to 8% since v2.8.5 and up to 16% since v2.8.4, thanks @SChernykh
Fixed hashrate fluctuations. It's no longer necessary to use different intensities per thread.
Improved cn-heavy/tube perfomance up to 6% and cn/2 perfomance up to 1%.
Reduced power consumption with cn/2
Fixed possible invalid shares right after donation finish.
Improved AMD Vega64 auto configuration.

[Peto851]

Hello community
I need your help
Guys i use Sapphire RX 580 Nitro(plus) 4GB Hynix Bios for my cards  for 1 year
https://mega.nz/#!gHoGBKDZ!QhNE4j8oZ4VkdiM3xtsHeBoTRiouo75o9UVAOJbh6Lg
But  last weeks many times reboot my rig  cause  this message
Rig is rebooting due to system error. It could be caused by too much overclock/undervolt.

Always was  works great (30+ MH/s + undervolt), but now my rig reboot  after couple hours
I can not explain it
This ROM has a recommended driver 17.30.1029
https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx

But I can feel that something has changed on the Simpleminning side.
And now my ROM does not work as before
All components are in order (stock rom works without failures)
Does anyone have any advice for me to solve it?
Is there any new ROM version for Saphire RX580 4GB(elpida) cards that work correctly with Simpleminning OS ?

Check PSU, how many cards do you have on it? What are your settings (core, memory, mV) for mining, I presume ETH? Are you using them in the same conditions (winter, summer)?

I do not know how to test the PSU, it should be okay
It's rm750x Corsair   Current harvesting 300w 2x cards
Setting : cclock 1150 mclock 2050 mvddc 875
The bios is already modified with the memory clocks and the cpu plus the voltage in 875 in memory
http://imgWorld.cz/s3/rTsVLbdz77.png
I minning ETH
Same conditions summer/winter

Can I change memory values? even when it's modified in bios?
If so, how? Do I have to use the command in the main configuration?
Or it would be enough to change in Simplemining OS / overclocking menu?

[BogdanCo]

Hello community
I need your help
Guys i use Sapphire RX 580 Nitro(plus) 4GB Hynix Bios for my cards  for 1 year
https://mega.nz/#!gHoGBKDZ!QhNE4j8oZ4VkdiM3xtsHeBoTRiouo75o9UVAOJbh6Lg
But  last weeks many times reboot my rig  cause  this message
Rig is rebooting due to system error. It could be caused by too much overclock/undervolt.

Always was  works great (30+ MH/s + undervolt), but now my rig reboot  after couple hours
I can not explain it
This ROM has a recommended driver 17.30.1029
https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx

But I can feel that something has changed on the Simpleminning side.
And now my ROM does not work as before
All components are in order (stock rom works without failures)
Does anyone have any advice for me to solve it?
Is there any new ROM version for Saphire RX580 4GB(elpida) cards that work correctly with Simpleminning OS ?

Check PSU, how many cards do you have on it? What are your settings (core, memory, mV) for mining, I presume ETH? Are you using them in the same conditions (winter, summer)?

I do not know how to test the PSU, it should be okay
It's rm750x Corsair   Current harvesting 300w 2x cards
Setting : cclock 1150 mclock 2050 mvddc 875
The bios is already modified with the memory clocks and the cpu plus the voltage in 875 in memory

I minning ETH
Same conditions summer/winter

Can I change memory values? even when it's modified in bios?
If so, how? Do I have to use the command in the main configuration?
Or it would be enough to change in Simplemining OS / overclocking menu?

Do not use the command in the main configuration. It's enough if you change them in SMOS. Try 900mV for the core into the overclocking menu, see how it's going... if it's stable go back to 875mV. See if the issue appears again.

[Peto851]

Hello community
I need your help
Guys i use Sapphire RX 580 Nitro(plus) 4GB Hynix Bios for my cards  for 1 year
https://mega.nz/#!gHoGBKDZ!QhNE4j8oZ4VkdiM3xtsHeBoTRiouo75o9UVAOJbh6Lg
But  last weeks many times reboot my rig  cause  this message
Rig is rebooting due to system error. It could be caused by too much overclock/undervolt.

Always was  works great (30+ MH/s + undervolt), but now my rig reboot  after couple hours
I can not explain it
This ROM has a recommended driver 17.30.1029
https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx

But I can feel that something has changed on the Simpleminning side.
And now my ROM does not work as before
All components are in order (stock rom works without failures)
Does anyone have any advice for me to solve it?
Is there any new ROM version for Saphire RX580 4GB(elpida) cards that work correctly with Simpleminning OS ?

Check PSU, how many cards do you have on it? What are your settings (core, memory, mV) for mining, I presume ETH? Are you using them in the same conditions (winter, summer)?

I do not know how to test the PSU, it should be okay
It's rm750x Corsair   Current harvesting 300w 2x cards
Setting : cclock 1150 mclock 2050 mvddc 875
The bios is already modified with the memory clocks and the cpu plus the voltage in 875 in memory
http://imgWorld.cz/s3/rTsVLbdz77.png
I minning ETH
Same conditions summer/winter

Can I change memory values? even when it's modified in bios?
If so, how? Do I have to use the command in the main configuration?
Or it would be enough to change in Simplemining OS / overclocking menu?

Do not use the command in the main configuration. It's enough if you change them in SMOS. Try 900mV for the core into the overclocking menu, see how it's going... if it's stable go back to 875mV. See if the issue appears again.

I tried Core undervolt 900 and after about 30 minutes reboot.

[tytanick]

New miners
ubqminer-v0.17.0-alpha1
t-rex-v0.8.0
finminer-v2.4.1

[x001tk]

New miners
ubqminer-v0.17.0-alpha1
t-rex-v0.8.0
finminer-v2.4.1

Thanks

Is there WatchDog available in T-Rex 0.8.0 ?

[BogdanCo]

---------

I tried Core undervolt 900 and after about 30 minutes reboot.

There is an error there, or just simply reboot?