Bitcoin Forum
November 22, 2017, 04:36:27 AM *
News: Latest stable version of Bitcoin Core: 0.15.1  [Torrent].
 
   Home   Help Search Donate Login Register  
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [24] 25 26 27 28 »
  Print  
Author Topic: Official Avalon Technical Support Thread  (Read 48099 times)
gpurig1
Newbie
*
Offline Offline

Activity: 14


View Profile
August 18, 2013, 03:45:09 PM
 #461

you should check the the number of boards miner count is 32 and not 24

I had the same problem once.

Where can I check that?
What do I do if its 24?

1511325387
Hero Member
*
Offline Offline

Posts: 1511325387

View Profile Personal Message (Offline)

Ignore
1511325387
Reply with quote  #2

1511325387
Report to moderator
1511325387
Hero Member
*
Offline Offline

Posts: 1511325387

View Profile Personal Message (Offline)

Ignore
1511325387
Reply with quote  #2

1511325387
Report to moderator
Join ICO Now A blockchain platform for effective freelancing
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
ProfMac
Legendary
*
Offline Offline

Activity: 854



View Profile
August 18, 2013, 03:50:36 PM
 #462

you should check the the number of boards miner count is 32 and not 24

I had the same problem once.

Where can I check that?
What do I do if its 24?



It will be 24 before you start.
Open the web page to your Avalon.  Go to the Status tab, the cgminer Configuration subtab
About 12 lines down, you should find the Miner Count entry.  Change this from 24 to 32.  Then click on Save & Apply.
The web page will appear hung for perhaps 30 seconds, then it will be live again.  Go check Status --> cgminer log at that point, all should be good.



I try to be respectful and informed.
thorvald
Sr. Member
****
Offline Offline

Activity: 242

Aa7kiQZaSRf7BDPvr3SUJyD7K63HEu6Tnt


View Profile
August 18, 2013, 03:50:45 PM
 #463

the miner count is the number of miner boards the cgminer connects to
if you have 3 modules you have 24 miners
if you have 4 modules you have 32 miners
you have to change in the miner count tab in cgminer configuration tub the number from 24 to 32

if you add it to the option tab it should be something like that  for example
 --avalon-options 115200:32:10:35:350
    baud rate: miner count : number of cips per board :latency :frequency
JerimiahJohnson
Full Member
***
Offline Offline

Activity: 125



View Profile
August 18, 2013, 04:31:10 PM
 #464

Hi,

I have 3 avalon batch 2 with 3 modules each.

Today I managed to buy 3 extra working modules from a broken avalon (modules are working fine).
The plan was to put in every of my 3 avalons an extra module.

I placed a corsair 1000 watt in it and connected all the cables. (power and ide cable)

The avalon boots and works fine however it refuses to hash with the 4th module.

I also tried the other modules and even put a module from my other working avalon in the empty slot.
When I connect the 3th module to the empty 4th slot is does not work either (only 2 units are hashing)

The avalon refuses to work with a module connected to the empty slot.

Can anybody help me?
Do I have to move some jumper/ change a setting?

If you help me to get the 4th module working you get 2 bitcoin as a reward.



The "IDE" cable as you say where did you get it? Did it come from a broken avalon or did you put a regular IDE cable in it.

Although they look like IDE cables they are NOT IDE cables. You need to get the ribbon cable from the broken avalon and use that,
I would update the firmware to 0627 ( ive had weird problems with 0723) and yes in cgminer configuration set miners to 32

If that does not work I would reseat all the ribbon cables and power cables on both sides and try again. Because if none of the above works it could simply be a case of a lose cablepair

feel free to PM me if you need anymore help I have upgraded several 3 units to 4 unit avalons myself.


Let me know if I was able to help
-JJ

Coming soon the Cointamination 16 65nm Chip BFL CLone Board.
Board Hashing: http://bit.ly/1cXs5Rt
6raygp
Newbie
*
Offline Offline

Activity: 27


View Profile
September 04, 2013, 04:32:20 AM
 #465

Hello

I'm running two Batch 3 Avalon 4 modules.  The machines has been running flawlessly for the last month+, in that entire time there has only been the need for one or two restarts and uptime was always measured in days.

A day ago in the middle of the afternoon one machine quite suddenly stopped hashing.  The yellow LED on the back came on.  There was no associated obvious event at the time, the circuit didn't trip or anything noticeable, just a sudden stop in mining.

To fix this, I've gone through every step I could think of.  Starting with simple restart, and finally escalating to the point where I put it into failsafe mode and rebooted the router, after this didnt work I even went as far as to reflash the wr703n.  This also includes opening up the Avalon and making sure every connection was snug, the problem remains the same, the machine boots to two lights, one green, one yellow, but doesn't mine even thou luci appears to function perfectly. I have copied every setting directly from a working avalons configuration. I believe the issuse stems from it only being able to connect locally threw cgminer, althou a ping of openwrt.com done from the avalons wr703n had 0% loss.

Thanks in advance, Any help would be appreciated I've tried to solve it on my self but came up against the wall.
System Log
Code:
Sat Jun 22 00:15:04 2013 daemon.info sysinit: ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:15:34 2013 daemon.info sysinit: ntpd: bad address '1.openwrt.pool.ntp.org'
Sat Jun 22 00:15:34 2013 daemon.info sysinit: ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:16:01 2013 news.info crond[727]: crond: USER root pid 3209 cmd /usr/bin/cgminer-monitor
Sat Jun 22 00:16:04 2013 daemon.info sysinit: ntpd: bad address '0.openwrt.pool.ntp.org'
Sat Jun 22 00:16:04 2013 daemon.info sysinit: ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:16:10 2013 daemon.info sysinit: Alarm clock
Sat Jun 22 00:16:40 2013 daemon.info sysinit: ntpd: bad address '3.openwrt.pool.ntp.org'
Sat Jun 22 00:16:40 2013 daemon.info sysinit: ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:17:10 2013 daemon.info sysinit: ntpd: bad address '2.openwrt.pool.ntp.org'
Sat Jun 22 00:17:10 2013 daemon.info sysinit: ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:17:40 2013 daemon.info sysinit: ntpd: bad address '1.openwrt.pool.ntp.org'
Sat Jun 22 00:17:40 2013 daemon.info sysinit: ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:18:01 2013 news.info crond[727]: crond: USER root pid 3220 cmd /usr/bin/cgminer-monitor
Sat Jun 22 00:18:10 2013 daemon.info sysinit: ntpd: bad address '0.openwrt.pool.ntp.org'
Sat Jun 22 00:18:10 2013 daemon.info sysinit: ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:18:16 2013 daemon.info sysinit: Alarm clock
Sat Jun 22 00:18:46 2013 daemon.info sysinit: ntpd: bad address '3.openwrt.pool.ntp.org'
Sat Jun 22 00:18:46 2013 daemon.info sysinit: ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:19:16 2013 daemon.info sysinit: ntpd: bad address '2.openwrt.pool.ntp.org'
Sat Jun 22 00:19:16 2013 daemon.info sysinit: ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:19:46 2013 daemon.info sysinit: ntpd: bad address '1.openwrt.pool.ntp.org'
Sat Jun 22 00:19:46 2013 daemon.info sysinit: ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:20:01 2013 news.info crond[727]: crond: USER root pid 3230 cmd /usr/bin/cgminer-monitor
Sat Jun 22 00:20:16 2013 daemon.info sysinit: ntpd: bad address '0.openwrt.pool.ntp.org'
Sat Jun 22 00:20:16 2013 daemon.info sysinit: ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:20:17 2013 auth.info kernel: [ 5066.910000] eth0: link up (100Mbps/Full duplex)
Sat Jun 22 00:20:17 2013 auth.info kernel: [ 5066.910000] br-lan: port 1(eth0) entered forwarding state
Sat Jun 22 00:20:17 2013 auth.info kernel: [ 5066.920000] br-lan: port 1(eth0) entered forwarding state
Sat Jun 22 00:20:19 2013 auth.info kernel: [ 5068.920000] br-lan: port 1(eth0) entered forwarding state
Sat Jun 22 00:20:22 2013 daemon.info sysinit: Alarm clock
Sat Jun 22 00:20:52 2013 daemon.info sysinit: ntpd: bad address '3.openwrt.pool.ntp.org'
Sat Jun 22 00:20:52 2013 daemon.info sysinit: ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:21:22 2013 daemon.info sysinit: ntpd: bad address '2.openwrt.pool.ntp.org'
Sat Jun 22 00:21:22 2013 daemon.info sysinit: ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:21:52 2013 daemon.info sysinit: ntpd: bad address '1.openwrt.pool.ntp.org'
Sat Jun 22 00:21:52 2013 daemon.info sysinit: ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:22:01 2013 news.info crond[727]: crond: USER root pid 3241 cmd /usr/bin/cgminer-monitor
Sat Jun 22 00:22:22 2013 daemon.info sysinit: ntpd: bad address '0.openwrt.pool.ntp.org'
Sat Jun 22 00:22:22 2013 daemon.info sysinit: ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:22:28 2013 daemon.info sysinit: Alarm clock
Sat Jun 22 00:22:58 2013 daemon.info sysinit: ntpd: bad address '3.openwrt.pool.ntp.org'
Sat Jun 22 00:22:58 2013 daemon.info sysinit: ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:23:28 2013 daemon.info sysinit: ntpd: bad address '2.openwrt.pool.ntp.org'
Sat Jun 22 00:23:28 2013 daemon.info sysinit: ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:23:58 2013 daemon.info sysinit: ntpd: bad address '1.openwrt.pool.ntp.org'
Sat Jun 22 00:23:58 2013 daemon.info sysinit: ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:24:01 2013 news.info crond[727]: crond: USER root pid 3252 cmd /usr/bin/cgminer-monitor
Sat Jun 22 00:24:28 2013 daemon.info sysinit: ntpd: bad address '0.openwrt.pool.ntp.org'
Sat Jun 22 00:24:28 2013 daemon.info sysinit: ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:24:34 2013 daemon.info sysinit: Alarm clock
Sat Jun 22 00:25:04 2013 daemon.info sysinit: ntpd: bad address '3.openwrt.pool.ntp.org'
Sat Jun 22 00:25:04 2013 daemon.info sysinit: ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:25:34 2013 daemon.info sysinit: ntpd: bad address '2.openwrt.pool.ntp.org'
Sat Jun 22 00:25:34 2013 daemon.info sysinit: ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:25:47 2013 auth.info kernel: [ 5396.910000] eth0: link down
Sat Jun 22 00:25:47 2013 auth.info kernel: [ 5396.910000] br-lan: port 1(eth0) entered disabled state
Sat Jun 22 00:25:54 2013 auth.info kernel: [ 5403.910000] eth0: link up (100Mbps/Full duplex)
Sat Jun 22 00:25:54 2013 auth.info kernel: [ 5403.910000] br-lan: port 1(eth0) entered forwarding state
Sat Jun 22 00:25:54 2013 auth.info kernel: [ 5403.920000] br-lan: port 1(eth0) entered forwarding state
Sat Jun 22 00:25:56 2013 auth.info kernel: [ 5405.920000] br-lan: port 1(eth0) entered forwarding state
Sat Jun 22 00:26:01 2013 news.info crond[727]: crond: USER root pid 3270 cmd /usr/bin/cgminer-monitor
Sat Jun 22 00:26:04 2013 daemon.info sysinit: ntpd: bad address '1.openwrt.pool.ntp.org'
Sat Jun 22 00:26:04 2013 daemon.info sysinit: ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:26:34 2013 daemon.info sysinit: ntpd: bad address '0.openwrt.pool.ntp.org'
Sat Jun 22 00:26:34 2013 daemon.info sysinit: ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:26:40 2013 daemon.info sysinit: Alarm clock
Sat Jun 22 00:27:10 2013 daemon.info sysinit: ntpd: bad address '3.openwrt.pool.ntp.org'
Sat Jun 22 00:27:10 2013 daemon.info sysinit: ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:27:38 2013 auth.info kernel: [ 5507.220000] device wlan0 entered promiscuous mode
Sat Jun 22 00:27:38 2013 auth.info kernel: [ 5507.360000] br-lan: port 2(wlan0) entered forwarding state
Sat Jun 22 00:27:38 2013 auth.info kernel: [ 5507.360000] br-lan: port 2(wlan0) entered forwarding state
Sat Jun 22 00:27:39 2013 daemon.info hostapd: wlan0: STA b4:f0:ab:99:4e:b6 IEEE 802.11: authenticated
Sat Jun 22 00:27:39 2013 daemon.info hostapd: wlan0: STA b4:f0:ab:99:4e:b6 IEEE 802.11: associated (aid 1)
Sat Jun 22 00:27:40 2013 auth.info kernel: [ 5509.360000] br-lan: port 2(wlan0) entered forwarding state
Sat Jun 22 00:27:40 2013 daemon.info sysinit: ntpd: bad address '2.openwrt.pool.ntp.org'
Sat Jun 22 00:27:40 2013 daemon.info sysinit: ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:28:01 2013 news.info crond[727]: crond: USER root pid 4673 cmd /usr/bin/cgminer-monitor
Sat Jun 22 00:28:10 2013 daemon.info sysinit: ntpd: bad address '1.openwrt.pool.ntp.org'
Sat Jun 22 00:28:10 2013 daemon.info sysinit: ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:28:40 2013 auth.info kernel: [ 5569.660000] device wlan0 left promiscuous mode
Sat Jun 22 00:28:40 2013 auth.info kernel: [ 5569.660000] br-lan: port 2(wlan0) entered disabled state
Sat Jun 22 00:28:40 2013 daemon.info sysinit: ntpd: bad address '0.openwrt.pool.ntp.org'
Sat Jun 22 00:28:40 2013 daemon.info sysinit: ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping
Sat Jun 22 00:28:44 2013 auth.info kernel: [ 5573.430000] wlan0: authenticate with 00:7f:28:fe:94:37
Sat Jun 22 00:28:44 2013 auth.info kernel: [ 5573.460000] wlan0: send auth to 00:7f:28:fe:94:37 (try 1/3)
Sat Jun 22 00:28:44 2013 auth.info kernel: [ 5573.470000] wlan0: authenticated
Sat Jun 22 00:28:44 2013 auth.info kernel: [ 5573.500000] wlan0: associate with 00:7f:28:fe:94:37 (try 1/3)
Sat Jun 22 00:28:44 2013 auth.info kernel: [ 5573.500000] wlan0: RX AssocResp from 00:7f:28:fe:94:37 (capab=0x411 status=0 aid=3)
Sat Jun 22 00:28:44 2013 auth.info kernel: [ 5573.510000] wlan0: associated
Sat Jun 22 00:28:45 2013 daemon.info dnsmasq[782]: exiting on receipt of SIGTERM
Sat Jun 22 00:28:45 2013 daemon.error netifd: wwan (5395): udhcpc (v1.19.4) started
Sat Jun 22 00:28:45 2013 daemon.error netifd: wwan (5395): Sending discover...
Sat Jun 22 00:28:45 2013 daemon.error netifd: wwan (5395): Sending select for 192.168.1.10...
Sat Jun 22 00:28:45 2013 daemon.error netifd: wwan (5395): Lease of 192.168.1.10 obtained, lease time 604800
Sat Jun 22 00:28:45 2013 daemon.error netifd: Interface 'wwan' is now up
Sat Jun 22 00:28:45 2013 authpriv.error firewall: Reloading firewall due to ifup of wwan (wlan0)
Sat Jun 22 00:28:46 2013 daemon.info sysinit: Alarm clock
Sat Jun 22 00:28:47 2013 authpriv.error dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Sat Jun 22 00:28:47 2013 authpriv.error dnsmasq: Allowing 127.0.0.0/8 responses
Sat Jun 22 00:28:47 2013 daemon.info dnsmasq[5455]: started, version 2.66 cachesize 150
Sat Jun 22 00:28:47 2013 daemon.info dnsmasq[5455]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth
Sat Jun 22 00:28:47 2013 daemon.info dnsmasq[5455]: using local addresses only for domain lan
Sat Jun 22 00:28:47 2013 daemon.info dnsmasq[5455]: reading /tmp/resolv.conf.auto
Sat Jun 22 00:28:47 2013 daemon.info dnsmasq[5455]: using nameserver 192.168.1.1#53
Sat Jun 22 00:28:47 2013 daemon.info dnsmasq[5455]: using nameserver 192.168.0.1#53
Sat Jun 22 00:28:47 2013 daemon.info dnsmasq[5455]: using local addresses only for domain lan
Sat Jun 22 00:28:47 2013 daemon.info dnsmasq[5455]: read /etc/hosts - 1 addresses
Sat Jun 22 00:28:52 2013 daemon.info sysinit: ntpd: resolved peer 3.openwrt.pool.ntp.org to 195.222.33.219
Sat Jun 22 00:28:52 2013 daemon.info sysinit: ntpd: sent query to 195.222.33.219
Sat Jun 22 00:28:52 2013 daemon.info sysinit: ntpd: resolved peer 2.openwrt.pool.ntp.org to 72.8.140.240
Sat Jun 22 00:28:52 2013 daemon.info sysinit: ntpd: sent query to 72.8.140.240
Sat Jun 22 00:28:52 2013 daemon.info sysinit: ntpd: resolved peer 1.openwrt.pool.ntp.org to 172.245.212.17
Sat Jun 22 00:28:52 2013 daemon.info sysinit: ntpd: sent query to 172.245.212.17
Sat Jun 22 00:28:52 2013 daemon.info sysinit: ntpd: resolved peer 0.openwrt.pool.ntp.org to 200.192.112.8
Sat Jun 22 00:28:52 2013 daemon.info sysinit: ntpd: sent query to 200.192.112.8
Sat Jun 22 00:28:52 2013 daemon.info sysinit: ntpd: reply from 72.8.140.240: reach 0x01 offset 6406790.793459 delay 0.062443 status 0x24 strat 2 refid 0x409374e5 rootdelay 0.002884
Sat Jun 22 00:28:52 2013 daemon.info sysinit: ntpd: reply from 200.192.112.8: reach 0x01 offset 6406790.794427 delay 0.221704 status 0x64 strat 2 refid 0xc8a007ba rootdelay 0.008042
Sat Jun 22 00:28:52 2013 daemon.info sysinit: ntpd: reply from 195.222.33.219: reach 0x01 offset 6406790.799837 delay 0.234574 status 0x24 strat 2 refid 0xc3de20e1 rootdelay 0.000366
Sat Jun 22 00:28:53 2013 daemon.info sysinit: ntpd: reply from 172.245.212.17: reach 0x01 offset 6406790.371345 delay 1.004832 status 0x24 strat 3 refid 0xd0576828 rootdelay 0.028397
Wed Sep  4 04:08:44 2013 daemon.info sysinit: ntpd: sent query to 195.222.33.219
Wed Sep  4 04:08:44 2013 daemon.info sysinit: ntpd: sent query to 72.8.140.240
Wed Sep  4 04:08:44 2013 daemon.info sysinit: ntpd: sent query to 172.245.212.17
Wed Sep  4 04:08:44 2013 daemon.info sysinit: ntpd: sent query to 200.192.112.8
Wed Sep  4 04:08:44 2013 daemon.info sysinit: ntpd: reply from 72.8.140.240: reach 0x03 offset -0.008306 delay 0.064579 status 0x24 strat 2 refid 0x409374e5 rootdelay 0.002884
Wed Sep  4 04:08:44 2013 daemon.info sysinit: ntpd: reply from 172.245.212.17: reach 0x03 offset 0.002897 delay 0.143439 status 0x24 strat 3 refid 0xd0576828 rootdelay 0.028397
Wed Sep  4 04:08:45 2013 daemon.info sysinit: ntpd: reply from 200.192.112.8: reach 0x03 offset -0.006319 delay 0.227303 status 0x64 strat 2 refid 0xc8a007ba rootdelay 0.008042
Wed Sep  4 04:08:45 2013 daemon.info sysinit: ntpd: reply from 195.222.33.219: reach 0x03 offset -0.004071 delay 0.238565 status 0x24 strat 2 refid 0xc3de20e1 rootdelay 0.000366
Wed Sep  4 04:08:46 2013 daemon.info sysinit: ntpd: sent query to 195.222.33.219
Wed Sep  4 04:08:46 2013 daemon.info sysinit: ntpd: reply from 195.222.33.219: reach 0x07 offset -0.004660 delay 0.235192 status 0x24 strat 2 refid 0xc3de20e1 rootdelay 0.000366
Wed Sep  4 04:08:47 2013 daemon.info sysinit: ntpd: sent query to 72.8.140.240
Wed Sep  4 04:08:47 2013 daemon.info sysinit: ntpd: sent query to 172.245.212.17
Wed Sep  4 04:08:47 2013 daemon.info sysinit: ntpd: sent query to 200.192.112.8
Wed Sep  4 04:08:47 2013 daemon.info sysinit: ntpd: reply from 72.8.140.240: reach 0x07 offset -0.009690 delay 0.063276 status 0x24 strat 2 refid 0x409374e5 rootdelay 0.002884
Wed Sep  4 04:08:47 2013 daemon.info sysinit: ntpd: reply from 172.245.212.17: reach 0x07 offset 0.006759 delay 0.136104 status 0x24 strat 3 refid 0xd0576828 rootdelay 0.028397
Wed Sep  4 04:08:47 2013 daemon.info sysinit: ntpd: reply from 200.192.112.8: reach 0x07 offset -0.006910 delay 0.232990 status 0x64 strat 2 refid 0xc8a007ba rootdelay 0.008042
Wed Sep  4 04:08:48 2013 daemon.info sysinit: ntpd: sent query to 195.222.33.219
Wed Sep  4 04:08:48 2013 daemon.info sysinit: ntpd: reply from 195.222.33.219: reach 0x0f offset -0.003990 delay 0.235301 status 0x24 strat 2 refid 0xc3de20e1 rootdelay 0.000366
Wed Sep  4 04:08:49 2013 daemon.info sysinit: ntpd: sent query to 195.222.33.219
Wed Sep  4 04:08:49 2013 daemon.info sysinit: ntpd: sent query to 72.8.140.240
Wed Sep  4 04:08:49 2013 daemon.info sysinit: ntpd: sent query to 172.245.212.17
Wed Sep  4 04:08:49 2013 daemon.info sysinit: ntpd: sent query to 200.192.112.8
Wed Sep  4 04:08:49 2013 daemon.info sysinit: ntpd: reply from 72.8.140.240: reach 0x0f offset -0.011237 delay 0.064747 status 0x24 strat 2 refid 0x409374e5 rootdelay 0.002884
Wed Sep  4 04:08:49 2013 daemon.info sysinit: ntpd: reply from 172.245.212.17: reach 0x0f offset 0.006231 delay 0.130539 status 0x24 strat 3 refid 0xd0576828 rootdelay 0.028397
Wed Sep  4 04:08:49 2013 daemon.info sysinit: ntpd: reply from 200.192.112.8: reach 0x0f offset -0.007911 delay 0.227253 status 0x64 strat 2 refid 0xc8a007ba rootdelay 0.008042
Wed Sep  4 04:08:50 2013 daemon.info sysinit: ntpd: reply from 195.222.33.219: reach 0x1f offset -0.003842 delay 0.233941 status 0x24 strat 2 refid 0xc3de20e1 rootdelay 0.000366
Wed Sep  4 04:08:51 2013 daemon.info sysinit: ntpd: sent query to 195.222.33.219
Wed Sep  4 04:08:51 2013 daemon.info sysinit: ntpd: reply from 195.222.33.219: reach 0x3f offset -0.003501 delay 0.234137 status 0x24 strat 2 refid 0xc3de20e1 rootdelay 0.000366
Wed Sep  4 04:08:52 2013 news.emerg crond[727]: time disparity of 106780 minutes detected
Wed Sep  4 04:08:52 2013 daemon.info sysinit: ntpd: sent query to 195.222.33.219
Wed Sep  4 04:08:52 2013 daemon.info sysinit: ntpd: sent query to 72.8.140.240
Wed Sep  4 04:08:52 2013 daemon.info sysinit: ntpd: sent query to 172.245.212.17
Wed Sep  4 04:08:52 2013 daemon.info sysinit: ntpd: sent query to 200.192.112.8
Wed Sep  4 04:08:52 2013 daemon.info sysinit: ntpd: reply from 72.8.140.240: reach 0x1f offset -0.010214 delay 0.064767 status 0x24 strat 2 refid 0x409374e5 rootdelay 0.002884
Wed Sep  4 04:08:52 2013 daemon.info sysinit: ntpd: reply from 172.245.212.17: reach 0x1f offset 0.004319 delay 0.140605 status 0x24 strat 3 refid 0xd0576828 rootdelay 0.028397
Wed Sep  4 04:08:52 2013 daemon.info sysinit: ntpd: reply from 200.192.112.8: reach 0x1f offset -0.007046 delay 0.229165 status 0x64 strat 2 refid 0xc8a007ba rootdelay 0.008042
Wed Sep  4 04:08:52 2013 daemon.info sysinit: ntpd: reply from 195.222.33.219: reach 0x7f offset -0.003247 delay 0.237917 status 0x24 strat 2 refid 0xc3de20e1 rootdelay 0.000366
Wed Sep  4 04:08:53 2013 daemon.info sysinit: ntpd: sent query to 72.8.140.240
Wed Sep  4 04:08:53 2013 daemon.info sysinit: ntpd: reply from 72.8.140.240: reach 0x3f offset -0.011564 delay 0.062970 status 0x24 strat 2 refid 0x409374e5 rootdelay 0.002884
Wed Sep  4 04:08:54 2013 daemon.info sysinit: ntpd: sent query to 195.222.33.219
Wed Sep  4 04:08:54 2013 daemon.info sysinit: ntpd: sent query to 172.245.212.17
Wed Sep  4 04:08:54 2013 daemon.info sysinit: ntpd: sent query to 200.192.112.8
Wed Sep  4 04:08:54 2013 daemon.info sysinit: ntpd: reply from 172.245.212.17: reach 0x3f offset 0.003779 delay 0.135603 status 0x24 strat 3 refid 0xd0576828 rootdelay 0.028397
Wed Sep  4 04:08:54 2013 daemon.info sysinit: ntpd: reply from 200.192.112.8: reach 0x3f offset -0.007041 delay 0.225891 status 0x64 strat 2 refid 0xc8a007ba rootdelay 0.008042
Wed Sep  4 04:08:54 2013 daemon.info sysinit: ntpd: reply from 195.222.33.219: reach 0xff offset -0.004938 delay 0.238216 status 0x24 strat 2 refid 0xc3de20e1 rootdelay 0.000366
Wed Sep  4 04:08:55 2013 daemon.info sysinit: ntpd: sent query to 195.222.33.219
Wed Sep  4 04:08:55 2013 daemon.info sysinit: ntpd: sent query to 72.8.140.240
Wed Sep  4 04:08:55 2013 daemon.info sysinit: ntpd: reply from 72.8.140.240: reach 0x7f offset -0.012271 delay 0.063010 status 0x24 strat 2 refid 0x409374e5 rootdelay 0.002884
Wed Sep  4 04:08:56 2013 daemon.info sysinit: ntpd: reply from 195.222.33.219: reach 0xff offset -0.003286 delay 0.236144 status 0x24 strat 2 refid 0xc3de20e1 rootdelay 0.000366
Wed Sep  4 04:08:56 2013 daemon.info sysinit: - init complete -

CGMiner APi Log
Code:
[Firmware Version] => 20130723
cgminer-37815e0
luci-56acbaa
cgminer-openwrt-packages-d9bac89
Reply was 'STATUS=S,When=1378268011,Code=70,Msg=CGMiner stats,Description=cgminer 3.3.1|STATS=0,ID=AVA0,Elapsed=84,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,baud=115200,miner_count=24,asic_count=10,timeout=45,frequency=282,fan1=0,fan2=0,fan3=0,temp1=0,temp2=0,temp3=0,temp_max=0,no_matching_work=0,match_work_count1=0,match_work_count2=0,match_work_count3=0,match_work_count4=0,match_work_count5=0,match_work_count6=0,match_work_count7=0,match_work_count8=0,match_work_count9=0,match_work_count10=0,match_work_count11=0,match_work_count12=0,match_work_count13=0,match_work_count14=0,match_work_count15=0,match_work_count16=0,match_work_count17=0,match_work_count18=0,match_work_count19=0,match_work_count20=0,match_work_count21=0,match_work_count22=0,match_work_count23=0,match_work_count24=0,USB Pipe=0,USB Delay=r0 0.000000 w0 0.000000|STATS=1,ID=POOL0,Elapsed=84,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=1.00000000,Min Diff=1.00000000,Max Diff=1.00000000,Min Diff Count=442,Max Diff Count=442,Times Sent=2,Bytes Sent=147,Times Recv=7,Bytes Recv=4751,Net Bytes Sent=147,Net Bytes Recv=4751|STATS=2,ID=POOL1,Elapsed=84,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=1.00000000,Min Diff=1.00000000,Max Diff=1.00000000,Min Diff Count=442,Max Diff Count=442,Times Sent=2,Bytes Sent=147,Times Recv=9,Bytes Recv=6537,Net Bytes Sent=147,Net Bytes Recv=6537|STATS=3,ID=POOL2,Elapsed=84,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=0.00000000,Min Diff=0.00000000,Max Diff=0.00000000,Min Diff Count=0,Max Diff Count=0,Times Sent=0,Bytes Sent=0,Times Recv=0,Bytes Recv=0,Net Bytes Sent=0,Net Bytes Recv=0|'
[STATUS] =>
(
   [STATUS] => S
   [When] => 1378268011
   [Code] => 70
   [Msg] => CGMiner stats
   [Description] => cgminer 3.3.1
)
[STATS0] =>
(
   [STATS] => 0
   [ID] => AVA0
   [Elapsed] => 84
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [baud] => 115200
   [miner_count] => 24
   [asic_count] => 10
   [timeout] => 45
   [frequency] => 282
   [fan1] => 0
   [fan2] => 0
   [fan3] => 0
   [temp1] => 0
   [temp2] => 0
   [temp3] => 0
   [temp_max] => 0
   [no_matching_work] => 0
   [match_work_count1] => 0
   [match_work_count2] => 0
   [match_work_count3] => 0
   [match_work_count4] => 0
   [match_work_count5] => 0
   [match_work_count6] => 0
   [match_work_count7] => 0
   [match_work_count8] => 0
   [match_work_count9] => 0
   [match_work_count10] => 0
   [match_work_count11] => 0
   [match_work_count12] => 0
   [match_work_count13] => 0
   [match_work_count14] => 0
   [match_work_count15] => 0
   [match_work_count16] => 0
   [match_work_count17] => 0
   [match_work_count18] => 0
   [match_work_count19] => 0
   [match_work_count20] => 0
   [match_work_count21] => 0
   [match_work_count22] => 0
   [match_work_count23] => 0
   [match_work_count24] => 0
   [USB Pipe] => 0
   [USB Delay] => r0 0.000000 w0 0.000000
)
[STATS1] =>
(
   [STATS] => 1
   [ID] => POOL0
   [Elapsed] => 84
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 1.00000000
   [Min Diff] => 1.00000000
   [Max Diff] => 1.00000000
   [Min Diff Count] => 442
   [Max Diff Count] => 442
   [Times Sent] => 2
   [Bytes Sent] => 147
   [Times Recv] => 7
   [Bytes Recv] => 4751
   [Net Bytes Sent] => 147
   [Net Bytes Recv] => 4751
)
[STATS2] =>
(
   [STATS] => 2
   [ID] => POOL1
   [Elapsed] => 84
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 1.00000000
   [Min Diff] => 1.00000000
   [Max Diff] => 1.00000000
   [Min Diff Count] => 442
   [Max Diff Count] => 442
   [Times Sent] => 2
   [Bytes Sent] => 147
   [Times Recv] => 9
   [Bytes Recv] => 6537
   [Net Bytes Sent] => 147
   [Net Bytes Recv] => 6537
)
[STATS3] =>
(
   [STATS] => 3
   [ID] => POOL2
   [Elapsed] => 84
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 0.00000000
   [Min Diff] => 0.00000000
   [Max Diff] => 0.00000000
   [Min Diff Count] => 0
   [Max Diff Count] => 0
   [Times Sent] => 0
   [Bytes Sent] => 0
   [Times Recv] => 0
   [Bytes Recv] => 0
   [Net Bytes Sent] => 0
   [Net Bytes Recv] => 0
)

Kernal Log
Code:
[    0.000000] Linux version 3.8.13 (xiangfu@0xf8) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2012.12 r37008) ) #8 Tue Jul 23 15:28:47 CST 2013
[    0.000000] MyLoader: sysp=388dd517, boardp=04505212, parts=7709ac36
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 802fc470, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8128 pages, LIFO batch:0
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=TL-WR703N console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 28852k/32768k available (2182k kernel code, 3916k reserved, 574k data, 248k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.090000] MIPS: machine is TP-LINK TL-WR703N v1
[    0.350000] bio: create slab <bio-0> at 0
[    0.350000] Switching to clocksource MIPS
[    0.360000] NET: Registered protocol family 2
[    0.360000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.370000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.370000] TCP: Hash tables configured (established 512 bind 512)
[    0.380000] TCP: reno registered
[    0.380000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.390000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.400000] NET: Registered protocol family 1
[    0.400000] PCI: CLS 0 bytes, default 32
[    0.420000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.420000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.430000] msgmni has been set to 56
[    0.430000] io scheduler noop registered
[    0.440000] io scheduler deadline registered (default)
[    0.440000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.450000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
[    0.460000] console [ttyATH0] enabled, bootconsole disabled
[    0.470000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[    0.480000] m25p80 spi0.0: found en25q32b, expected m25p80
[    0.480000] m25p80 spi0.0: en25q32b (4096 Kbytes)
[    0.490000] 5 tp-link partitions found on MTD device spi0.0
[    0.490000] Creating 5 MTD partitions on "spi0.0":
[    0.500000] 0x000000000000-0x000000020000 : "u-boot"
[    0.500000] 0x000000020000-0x00000011765c : "kernel"
[    0.510000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.520000] 0x00000011765c-0x0000003f0000 : "rootfs"
[    0.520000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.540000] mtd: partition "rootfs" set to be root filesystem
[    0.540000] mtd: partition "rootfs_data" created automatically, ofs=3A0000, len=50000
[    0.550000] 0x0000003a0000-0x0000003f0000 : "rootfs_data"
[    0.560000] 0x0000003f0000-0x000000400000 : "art"
[    0.560000] 0x000000020000-0x0000003f0000 : "firmware"
[    0.580000] libphy: ag71xx_mdio: probed
[    0.590000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    1.140000] ag71xx ag71xx.0 eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[    1.150000] TCP: cubic registered
[    1.150000] NET: Registered protocol family 17
[    1.160000] 8021q: 802.1Q VLAN Support v1.8
[    1.170000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    1.170000] Freeing unused kernel memory: 248k freed
[    3.000000] usbcore: registered new interface driver usbfs
[    3.000000] usbcore: registered new interface driver hub
[    3.010000] usbcore: registered new device driver usb
[    3.140000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.150000] ehci-platform: EHCI generic platform driver
[    3.150000] ehci-platform ehci-platform: EHCI Host Controller
[    3.160000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    3.170000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    3.190000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    3.190000] hub 1-0:1.0: USB hub found
[    3.190000] hub 1-0:1.0: 1 port detected
[    3.580000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    3.730000] hub 1-1:1.0: USB hub found
[    3.730000] hub 1-1:1.0: 2 ports detected
[    4.030000] usb 1-1.1: new full-speed USB device number 3 using ehci-platform
[    6.170000] eth0: link up (100Mbps/Full duplex)
[    7.030000] jffs2: notice: (312) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 14 of xref (0 dead, 2 orphan) found.
[    7.060000] eth0: link down
[    9.450000] Loading modules backported from Linux version master-2013-06-13-0-g09fcdfb
[    9.460000] Backport generated by backports.git backports-20130531-13-g3d933eb
[    9.500000] cfg80211: Calling CRDA to update world regulatory domain
[    9.500000] cfg80211: World regulatory domain updated:
[    9.510000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    9.510000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.520000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.530000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.540000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.550000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.270000] ath: EEPROM regdomain: 0x0
[   10.270000] ath: EEPROM indicates default country code should be used
[   10.270000] ath: doing EEPROM country->regdmn map search
[   10.270000] ath: country maps to regdmn code: 0x3a
[   10.270000] ath: Country alpha2 being used: US
[   10.270000] ath: Regpair used: 0x3a
[   10.280000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.290000] cfg80211: Calling CRDA for country: US
[   10.290000] cfg80211: Regulatory domain changed to country: US
[   10.300000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.310000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   10.320000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   10.320000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.330000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.340000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.350000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   10.360000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[   10.680000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.700000] xt_time: kernel timezone is -0000
[   10.850000] nf_conntrack version 0.5.0 (454 buckets, 1816 max)
[   11.550000] usbcore: registered new interface driver usbserial
[   11.560000] usbcore: registered new interface driver usbserial_generic
[   11.560000] usbserial: USB Serial support registered for generic
[   11.670000] usbcore: registered new interface driver ftdi_sio
[   11.680000] usbserial: USB Serial support registered for FTDI USB Serial Device
[   11.680000] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected
[   11.690000] usb 1-1.1: Detected FT232RL
[   11.690000] usb 1-1.1: Number of endpoints 2
[   11.700000] usb 1-1.1: Endpoint 1 MaxPacketSize 16384
[   11.700000] usb 1-1.1: Endpoint 2 MaxPacketSize 16384
[   11.710000] usb 1-1.1: Setting MaxPacketSize 64
[   11.710000] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB0
[   15.010000] device eth0 entered promiscuous mode
[   15.500000] eth0: link up (100Mbps/Full duplex)
[   15.500000] br-lan: port 1(eth0) entered forwarding state
[   15.510000] br-lan: port 1(eth0) entered forwarding state
[   17.510000] br-lan: port 1(eth0) entered forwarding state
[   25.010000] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[   25.020000] ftdi_sio 1-1.1:1.0: device disconnected
[ 1017.890000] eth0: link down
[ 1017.890000] br-lan: port 1(eth0) entered disabled state
[ 2498.890000] eth0: link up (100Mbps/Full duplex)
[ 2498.890000] br-lan: port 1(eth0) entered forwarding state
[ 2498.900000] br-lan: port 1(eth0) entered forwarding state
[ 2500.900000] br-lan: port 1(eth0) entered forwarding state
[ 3780.910000] eth0: link down
[ 3780.910000] br-lan: port 1(eth0) entered disabled state
[ 5066.910000] eth0: link up (100Mbps/Full duplex)
[ 5066.910000] br-lan: port 1(eth0) entered forwarding state
[ 5066.920000] br-lan: port 1(eth0) entered forwarding state
[ 5068.920000] br-lan: port 1(eth0) entered forwarding state
[ 5396.910000] eth0: link down
[ 5396.910000] br-lan: port 1(eth0) entered disabled state
[ 5403.910000] eth0: link up (100Mbps/Full duplex)
[ 5403.910000] br-lan: port 1(eth0) entered forwarding state
[ 5403.920000] br-lan: port 1(eth0) entered forwarding state
[ 5405.920000] br-lan: port 1(eth0) entered forwarding state
[ 5507.220000] device wlan0 entered promiscuous mode
[ 5507.360000] br-lan: port 2(wlan0) entered forwarding state
[ 5507.360000] br-lan: port 2(wlan0) entered forwarding state
[ 5509.360000] br-lan: port 2(wlan0) entered forwarding state
[ 5569.660000] device wlan0 left promiscuous mode
[ 5569.660000] br-lan: port 2(wlan0) entered disabled state
[ 5573.430000] wlan0: authenticate with 00:7f:28:fe:94:37
[ 5573.460000] wlan0: send auth to 00:7f:28:fe:94:37 (try 1/3)
[ 5573.470000] wlan0: authenticated
[ 5573.500000] wlan0: associate with 00:7f:28:fe:94:37 (try 1/3)
[ 5573.500000] wlan0: RX AssocResp from 00:7f:28:fe:94:37 (capab=0x411 status=0 aid=3)
[ 5573.510000] wlan0: associated
[/code]
Kuma
Member
**
Offline Offline

Activity: 101



View Profile
September 04, 2013, 05:07:45 AM
 #466

Have you tried power off/on the unit? If it doesn't help, my bet should be the problem with PSU.
aTg
Legendary
*
Offline Offline

Activity: 1358



View Profile
September 04, 2013, 12:30:28 PM
 #467

Someone tried to make running a hashunit without heatsink but with fans directly on the pcb?
candoo
Hero Member
*****
Offline Offline

Activity: 602


Vertrau in Gott


View Profile
September 04, 2013, 12:43:08 PM
 #468

Someone tried to make running a hashunit without heatsink but with fans directly on the pcb?

bitfury  Grin

Einer trage des andern Last, so werdet ihr das Gesetz Christi erfüllen.
andrei.u
Jr. Member
*
Offline Offline

Activity: 48


View Profile
September 04, 2013, 08:27:09 PM
 #469

Someone tried to make running a hashunit without heatsink but with fans directly on the pcb?

bitfury  Grin

Hi,
Last time i checked,this place was designed by users FOR users, not for advertisers....

aTg, i think that it will work...but just to make them mine, not at full speed....
In a few days , i will get all my boards(1000 Avalon Hash_Units)  from China (which i will submerge in 3M Novec) and i will make a test for you and let you know if it works only with fans....
If nobody answers you , i promise you that i will make the test for you...
It nice to have people trying different things ...so we know all the limits of our equipment
6raygp
Newbie
*
Offline Offline

Activity: 27


View Profile
September 16, 2013, 05:51:16 PM
 #470


Newest error message

CGminer Status (freshly flashed with only network settings changed)

CGminer, Kernal and System Logs are in link below
https://bitcointalk.org/index.php?topic=140539.msg3089903#msg3089903


If anyone has any idea of what could be wrong, help is greatly appreciated..
Thanks in advance

1. Your top 2 pictures/screen shots are too small ... can't read a thing
2. Firmware wise .. use this one: http://ck.kolivas.org/apps/cgminer/avalon/20130821/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-factory.bin
[
Hi there, thanks for the respownse.  I'll post up a better screenshot later today, but the biggest takeaway from it would be the large number of Local GetWorks that were being produced, as well as an error message "AVA0: Get avalon read get err 0"

The issue of the Local GetWork is also illustrated in the larger picture of the output from Luci.  In the meantime, I will give a brief summary and offer up a 1BTC bounty for whoever can help solve this issue:

After happily mining along at 350mhz, this Batch 3 four module unit suddenly just halts all mining.  I was home when it happened and it wasn't any kind of slow wind-down, it just kicked off.  This would happen every so often and this machine or its sister unit (identical batch, modules, settings) would always just restart themselves, no worries.  (ckolivas, thank you so very much for all the time and effort you have put into making CGMiner the great program that it is, btw)

Of course, this time, the LED's on the back just stayed Green and Yellow.  I attempted the following fixes:

Made sure that all cables internally were secure
Reset the firmware to factory by flashing it via the button on the back (failsafe mode)
Reflashed the firmware to the one you linked to above (as well as a couple of others, just for good measure)
Removed the power and data cables from all modules and reconnected them individually
Attempted to mine using the USB and running CGMiner from a laptop
And finally tried to replace the power unit with two different compatible units (will explain the results of that below)

On the last point, both power units when swapped in would produce the same result.  The top LED would turn Red and the bottom would remain Yellow and then even after turning off and disconnecting the power unit from the wall, the LED's would remain lit for a short period of time.  The fans would never spin up and I never tried to communicate with or otherwise use the Avalon in that state.  When putting the original PSU back in, the fans would start-up and the LED's would go back the the (now) usual state of being Green and Yellow.

A few other things of note:  

It will ping to the outside when testing it using the Luci console and trying to reach openwrt.org

The FPGA shows a single solid green LED

Hopefully this is enough for someone to provide some guidance on what to try moving forward, I'd love for nothing more than to have to pay this bounty today. Smiley

CGminer, Kernal and System Logs are in link below
https://bitcointalk.org/index.php?topic=140539.msg3089903#msg3089903
one4many
Hero Member
*****
Offline Offline

Activity: 516



View Profile
September 16, 2013, 07:24:58 PM
 #471

Had a quick look at your output .... I noticed that you have the default setting of 24 for "Miner Count" in your config. As you wrote, it is a 4 "blade" unit so the correct value would be 32.

Can you also please check the hardware addresses of your both units network interfaces, they need to be different.
A factory reset followed by a fresh firmware flash will set them to the same address.

You can also try:
a) disconnect 3 out four modules and check if you have faulty one (burned chip etc.) ... remember to set the miner count correctly!
b) run the modules in the working Avalon miner in order to check that they are OK.

If it turns out to be your FPGA board, I suggest you get a new one from the bitmine.ch guys ... Let them know I send you, they will FedEx you one for a reasonable price.

All the best!

    one4many
6raygp
Newbie
*
Offline Offline

Activity: 27


View Profile
September 16, 2013, 09:13:35 PM
 #472

We have tried setting the miner count to 32 as well, as I understand disconnecting a module I just disconnect the power from the module and disconnect the data ribbon from the fpga? Ive tried this before to no avail.

How would one go about ordering a fpga from them? I searched their products and only found 4 items.


On a side note..
What does a yellow/red led usually mean?
irritant
Sr. Member
****
Offline Offline

Activity: 442


Sodium hypochlorite, acetone, ethanol


View Profile
September 17, 2013, 01:21:58 AM
 #473

We have tried setting the miner count to 32 as well, as I understand disconnecting a module I just disconnect the power from the module and disconnect the data ribbon from the fpga? Ive tried this before to no avail.

How would one go about ordering a fpga from them? I searched their products and only found 4 items.


On a side note..
What does a yellow/red led usually mean?

some issue with the PSU?
one4many
Hero Member
*****
Offline Offline

Activity: 516



View Profile
September 17, 2013, 01:51:18 AM
 #474

We have tried setting the miner count to 32 as well, as I understand disconnecting a module I just disconnect the power from the module and disconnect the data ribbon from the fpga? Ive tried this before to no avail.

How would one go about ordering a fpga from them? I searched their products and only found 4 items.

On a side note..
What does a yellow/red led usually mean?
Send them an email on info@bitmine.ch ... mention my name/nick.

BTW: Just disconnecting the power from the module is not enough, you have to remove ribbon cable as well (in order to rule out a short on the circuit board of a module).
JerimiahJohnson
Full Member
***
Offline Offline

Activity: 125



View Profile
September 17, 2013, 02:49:55 PM
 #475

Had a quick look at your output .... I noticed that you have the default setting of 24 for "Miner Count" in your config. As you wrote, it is a 4 "blade" unit so the correct value would be 32.

Can you also please check the hardware addresses of your both units network interfaces, they need to be different.
A factory reset followed by a fresh firmware flash will set them to the same address.

You can also try:
a) disconnect 3 out four modules and check if you have faulty one (burned chip etc.) ... remember to set the miner count correctly!
b) run the modules in the working Avalon miner in order to check that they are OK.

If it turns out to be your FPGA board, I suggest you get a new one from the bitmine.ch guys ... Let them know I send you, they will FedEx you one for a reasonable price.

All the best!

    one4many

I would try pulling the jumper and trying to run it directly from a linux box
if it still dosnt work, you can count on a bad FPGA board.




Coming soon the Cointamination 16 65nm Chip BFL CLone Board.
Board Hashing: http://bit.ly/1cXs5Rt
zerocode20
Member
**
Offline Offline

Activity: 84


View Profile
October 14, 2013, 04:40:43 PM
 #476

Are there any places to buy a bare FPGA replacement board?

"That which you call your soul or spirit is your consciousness, and that which you call 'free will' is your mind's freedom to think or not, the only will you have, your only freedom, the choice that controls all the choices you make and determines your life and your character."
one4many
Hero Member
*****
Offline Offline

Activity: 516



View Profile
October 14, 2013, 05:16:58 PM
 #477

Are there any places to buy a bare FPGA replacement board?
bitmine.ch might sell you one ... If it is Avalon batch #1 and #2
ProfMac
Legendary
*
Offline Offline

Activity: 854



View Profile
October 14, 2013, 05:27:41 PM
 #478

Is there a place to buy Batch #3 parts?

I try to be respectful and informed.
zerocode20
Member
**
Offline Offline

Activity: 84


View Profile
October 14, 2013, 05:56:51 PM
 #479

Posted this in another thread, but did not get any response.....

Does anyone run 1 or more Avalon units with just the USB interface? I have 2 REDHASH clones and have had multiple problems with the TP-Link Adapters. I have changed them both already and still having issues with dropped connections and/or low packets.

I have removed the USB jumper, installed WinUSB, and have cgminer 3.5 configured for the following: "cgminer.exe --avalon-options 115200:32:10:45:328 -o http://pool:port -u username -p password" and it seems to work for one unit. I did not run it very long because my TP-Link replacements came the same day.

Has anyone else tried this? If so, do you have better results that using the TP-Link adapter? I haven't made up my mind which way I want to continue to run my rigs. Would appreciate any input.

This is my Web Interface Data for both units. I note some inconsistencies that could maybe be cleaned up by getting rid of TP-Link module.



"That which you call your soul or spirit is your consciousness, and that which you call 'free will' is your mind's freedom to think or not, the only will you have, your only freedom, the choice that controls all the choices you make and determines your life and your character."
ProfMac
Legendary
*
Offline Offline

Activity: 854



View Profile
October 15, 2013, 05:00:39 AM
 #480

Can batch #3 fans plug into a batch #2 (bitmine.ch) control board?

I try to be respectful and informed.
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [24] 25 26 27 28 »
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!