kaerf
|
|
April 26, 2013, 05:05:33 PM |
|
Is there a way to reboot the FPGA control board from the host (openwrt)?
|
|
|
|
cypherdoc
Legendary
Offline
Activity: 1764
Merit: 1002
|
|
April 26, 2013, 05:08:15 PM |
|
Is there a way to reboot the FPGA control board from the host (openwrt)?
good question.
|
|
|
|
13Charlie
|
|
April 26, 2013, 07:35:40 PM |
|
Those IDE-looking cables that connect to miner models... there was some info around that they're not actually IDE?
So is there any spec for these cables available? Is it possible to somehow make such cables from normal IDE cables?
The reason I'm asking is that I try to rearrange some Avalons into 4-unit configuration, and most of these non-IDE cables are just too damn short to reach the 4th slot...
Once you have the specs, try THESE or THESE guys
|
No signature necessary
|
|
|
|
ewibit
Legendary
Offline
Activity: 2955
Merit: 1050
|
|
April 27, 2013, 10:30:33 PM |
|
|
|
|
|
johnyj
Legendary
Offline
Activity: 1988
Merit: 1012
Beyond Imagination
|
|
April 27, 2013, 10:46:31 PM |
|
This PSU is super luxury, but 200mm long, won't fit in the case, you might put it outside of the case I just replaced mine with a corsair GS800, no cgminer restart after one day, so far so good
|
|
|
|
aTg
Legendary
Offline
Activity: 1358
Merit: 1000
|
|
April 28, 2013, 07:38:50 AM |
|
Sitarow do not understand how you can have a 1000w consumption over a source of 800w
|
|
|
|
kingcoin
|
|
April 28, 2013, 07:58:20 AM |
|
Is there a datasheet for the ASIC which describes the protocol of the interfaces, the pinout, physical and thermal characteristics of the package, as well as the ac timing of the pins?
|
|
|
|
fpgaminer
|
|
April 28, 2013, 08:16:55 AM |
|
Is there a datasheet for the ASIC which describes the protocol of the interfaces, the pinout, physical and thermal characteristics of the package, as well as the ac timing of the pins? There is not. Avalon has stated that this information will eventually be released.
|
|
|
|
kingcoin
|
|
April 28, 2013, 08:40:11 AM |
|
Is there a datasheet for the ASIC which describes the protocol of the interfaces, the pinout, physical and thermal characteristics of the package, as well as the ac timing of the pins? There is not. Avalon has stated that this information will eventually be released. So all this talk about DIY is basically a kit?
|
|
|
|
fpgaminer
|
|
April 28, 2013, 09:09:50 AM |
|
So all this talk about DIY is basically a kit? Kit? I don't think most of the DIY projects are being designed as kits. It is all preliminary talk and design in anticipation of the actual datasheets. Anyone with an oscilloscope and an Avalon could cook up the datasheets right now, but I don't think anyone (publicly) has.
|
|
|
|
Sitarow
Legendary
Offline
Activity: 1792
Merit: 1047
|
|
April 28, 2013, 01:19:12 PM |
|
Sitarow do not understand how you can have a 1000w consumption over a source of 800w it is two Avalon units. Unit 114 and Unit 445 Each have their own power supply they are just plugged into 1 outlet. To demonstrate how many you can have operating on 1 15 amp 120v plug.
|
|
|
|
johnyj
Legendary
Offline
Activity: 1988
Merit: 1012
Beyond Imagination
|
|
April 29, 2013, 01:30:22 PM |
|
After I switched to a corsair GS800, cgminer never restarted It seems that the original power supply (Antec Earthwatt 650) is a bit inadequate
|
|
|
|
thorvald
|
|
April 29, 2013, 05:36:56 PM |
|
Had the same issue today with firmware 419 hash rate was 0 Stop/restart cgminer /reboot of system did not worked Changing pool , reconfiguring cgminer did not worked Cold boot fix it (power off /on) and now is working again It worked without restart for about 22h (each day after about 20h i`ve restarted the cgminer software) The system was running for about 50h Before the last system restart , it worked for ~85h with no problems
|
|
|
|
allinvain
Legendary
Offline
Activity: 3080
Merit: 1083
|
|
April 30, 2013, 12:15:52 AM |
|
After I switched to a corsair GS800, cgminer never restarted It seems that the original power supply (Antec Earthwatt 650) is a bit inadequate Perhaps, but mine is holding up remarkably well. 300 MHz clock speed and current uptime has been 6 days..woohoo!
|
|
|
|
Vicus
|
|
May 01, 2013, 05:22:37 AM |
|
I have a question: [STATS0] => ( [STATS] => 0 [ID] => AVA0 [Elapsed] => 109613 [Calls] => 0 [Wait] => 0.000000 [Max] => 0.000000 [Min] => 99999999.000000 [baud] => 115200 [miner_count] => 24 [asic_count] => 10 [timeout] => 40 [frequency] => 300 [fan1] => 0 [fan2] => 2760 [fan3] => 2760 [temp1] => 31 [temp2] => -1 [temp3] => 49 [temp_max] => 50 [no_matching_work] => 738 [matching_work_count1] => 76732 [matching_work_count2] => 75931 [matching_work_count3] => 76350 [matching_work_count4] => 76027 [matching_work_count5] => 76370 [matching_work_count6] => 76037 [matching_work_count7] => 76595 [matching_work_count8] => 76044 [matching_work_count9] => 76316 [matching_work_count10] => 76184 [matching_work_count11] => 76605 [matching_work_count12] => 75552 [matching_work_count13] => 76790 [matching_work_count14] => 76032 [matching_work_count15] => 76264 [matching_work_count16] => 76610 [matching_work_count17] => 76565 [matching_work_count18] => 76683 [matching_work_count19] => 76249 [matching_work_count20] => 45917 [matching_work_count21] => 76419 [matching_work_count22] => 75826 [matching_work_count23] => 76301 [matching_work_count24] => 76478 )
As I understand, one (20) of 24 miners is partially dead? Can other owners share stats of their units? Is this normal?
|
|
|
|
WinTame2012
|
|
May 01, 2013, 06:07:07 AM |
|
I have a question:
Congratulations on getting your Avalon back from hairy EMS Russia's hands!
|
|
|
|
Vicus
|
|
May 01, 2013, 06:13:54 AM |
|
I have a question:
Congratulations on getting your Avalon back from hairy EMS Russia's hands! tyvm
|
|
|
|
PuertoLibre
Legendary
Offline
Activity: 1890
Merit: 1003
|
|
May 01, 2013, 08:25:49 AM |
|
I have a question: [STATS0] => ( [STATS] => 0 [ID] => AVA0 [Elapsed] => 109613 [Calls] => 0 [Wait] => 0.000000 [Max] => 0.000000 [Min] => 99999999.000000 [baud] => 115200 [miner_count] => 24 [asic_count] => 10 [timeout] => 40 [frequency] => 300 [fan1] => 0 [fan2] => 2760 [fan3] => 2760 [temp1] => 31 [temp2] => -1 [temp3] => 49 [temp_max] => 50 [no_matching_work] => 738 [matching_work_count1] => 76732 [matching_work_count2] => 75931 [matching_work_count3] => 76350 [matching_work_count4] => 76027 [matching_work_count5] => 76370 [matching_work_count6] => 76037 [matching_work_count7] => 76595 [matching_work_count8] => 76044 [matching_work_count9] => 76316 [matching_work_count10] => 76184 [matching_work_count11] => 76605 [matching_work_count12] => 75552 [matching_work_count13] => 76790 [matching_work_count14] => 76032 [matching_work_count15] => 76264 [matching_work_count16] => 76610 [matching_work_count17] => 76565 [matching_work_count18] => 76683 [matching_work_count19] => 76249 [matching_work_count20] => 45917 [matching_work_count21] => 76419 [matching_work_count22] => 75826 [matching_work_count23] => 76301 [matching_work_count24] => 76478 )
As I understand, one (20) of 24 miners is partially dead? Can other owners share stats of their units? Is this normal? How do we access those stats? (Do we even want to look? <gulp>)
|
|
|
|
PuertoLibre
Legendary
Offline
Activity: 1890
Merit: 1003
|
|
May 01, 2013, 08:29:39 AM |
|
[STATS0] => ( [STATS] => 0 [ID] => AVA0 [Elapsed] => 71799 [Calls] => 54703 [Wait] => 3717.076391 [Max] => 0.162502 [Min] => 0.036587 [baud] => 115200 [miner_count] => 24 [asic_count] => 10 [read_count] => 0 [timeout] => 40 [frequency] => 300 [fan1] => 0 [fan2] => 2520 [fan3] => 2520 [temp1] => 33 [temp2] => -1 [temp3] => 44 [temp_max] => 48 [no_matching_work] => 3326 [matching_work_count1] => 49794 [matching_work_count2] => 49814 [matching_work_count3] => 49896 [matching_work_count4] => 50194 [matching_work_count5] => 49832 [matching_work_count6] => 49572 [matching_work_count7] => 50003 [matching_work_count8] => 49968 [matching_work_count9] => 49859 [matching_work_count10] => 50025 [matching_work_count11] => 49726 [matching_work_count12] => 50352 [matching_work_count13] => 50016 [matching_work_count14] => 49757 [matching_work_count15] => 50161 [matching_work_count16] => 49645 [matching_work_count17] => 49951 [matching_work_count18] => 49652 [matching_work_count19] => 49832 [matching_work_count20] => 50033 [matching_work_count21] => 50292 [matching_work_count22] => 49909 [matching_work_count23] => 49730 [matching_work_count24] => 50094 )
|
|
|
|
|