donatebitcointome
Newbie
Offline
Activity: 48
Merit: 0
|
|
July 07, 2017, 02:13:35 PM |
|
I'm having difficulties getting my 1060's up above 21Mh/s. I'm hoping that the veterans here can help me understand why my hashrate is lower than others are getting, even with the 3Gb cards?
- 6 x MSI GeForce GTX 1060 Gaming X+ 6gb Cards - Samsung Memory - 85% power / +125 Core / +850 Memory == ~64C
- Windows 10 64-bit latest version - 8Gb RAM - 16Gb Virtual Memory - Tried latest Nvidia drivers as well as driver 382.33 (read someone was using this version and got better results, I however did not increase my hashrate)
- Using Claymore rev 9.5 (I know it isn't latest but had same results prior to 9.6 release) and only single mining ETH
I do not understand what I can do to increase my hashrate. Any ideas?
MSI GeForce GTX 1060 Gaming X+ (Plus) is sucks. The Gaming X is better. Mine one Gaming X+ only get around 19-20 with +845 Memory. and with Gaming X, I get 23-24 with +996 Memory. With the new ethminer 0.11, Gaming X can get 24-25. Gaming X+ Sold before I could I try the new ethminer, so didn't what is the hashrate.
|
|
|
|
|
|
Remember that Bitcoin is still beta software. Don't put all of your money into BTC!
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
stna1981
Member
Offline
Activity: 140
Merit: 10
|
|
July 07, 2017, 02:21:58 PM |
|
Most (or all?) cards that are shipped currently seem to have Hynix memory, really bad...
|
|
|
|
ny2cafuse
Legendary
Offline
Activity: 1582
Merit: 1002
HODL for life.
|
|
July 07, 2017, 05:00:28 PM |
|
Most (or all?) cards that are shipped currently seem to have Hynix memory, really bad...
Zotac cards are running with Samsung memory. If you want to find out what memory a GPU card is using, google image search the card name + "GPU-Z". So for "Zotac 1060 GPU-Z", you'll get image search results that look like this: This is how I determined which cards to avoid. Plus Zotac cards seem to be in stock on Amazon more often, so double win. -Fuse
|
Community > Devs
|
|
|
stna1981
Member
Offline
Activity: 140
Merit: 10
|
|
July 07, 2017, 05:02:13 PM |
|
No. Got 3 Zotacs, 1 Samsung, 2 Hynix. Got 6 Gainward from 2 different sellers. All Hynix. You just can't tell upfront.
|
|
|
|
thesavoyard
|
|
July 07, 2017, 06:34:26 PM |
|
GTX 1060 3gb I'm getting 310 on equihash. That's only a 9 below a high-end 6gb, not worth spending more IMO.
|
|
|
|
gt_addict
|
|
July 07, 2017, 06:41:55 PM |
|
Most (or all?) cards that are shipped currently seem to have Hynix memory, really bad...
Zotac cards are running with Samsung memory. If you want to find out what memory a GPU card is using, google image search the card name + "GPU-Z". So for "Zotac 1060 GPU-Z", you'll get image search results that look like this: This is how I determined which cards to avoid. Plus Zotac cards seem to be in stock on Amazon more often, so double win. -Fuse That is one card, EVERY card has the chance to get any of the three memory types.
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
promomei
|
|
July 07, 2017, 06:43:38 PM |
|
Hey guys anybody have mined with ROG STRIX-GTX1060-O6G-GAMING mining How is is
|
|
|
|
ny2cafuse
Legendary
Offline
Activity: 1582
Merit: 1002
HODL for life.
|
|
July 07, 2017, 06:48:12 PM |
|
That is one card, EVERY card has the chance to get any of the three memory types.
Then I won the lotto, because GPU-Z shows Samsung for all the ones I bought . Good to know! -Fuse
|
Community > Devs
|
|
|
candyiman
|
|
July 07, 2017, 07:46:09 PM |
|
Guy I Believe it is Better to List the settings based on Samsung, micron and FUCKING hynix memory
Example
Stable Settings
KFA2 1060 3g OC Hynix
Power Limit 75% Core clock 0 Memory Clock +300
Eth 18,3
Genoil Optimized miner
|
|
|
|
candyiman
|
|
July 07, 2017, 09:27:51 PM |
|
Here is what I am doing just thought I'd share: 4 x EVGA GeForce GTX 1060 SSC 6GB Cards- 65% power
- -200 core
- +1000 memory
- Runs at ~51C
- Fans stay at ~55-60%
- Windows 7 64-bit - 8Gb RAM - Latest Nvidia drivers HashRates:- 23+ mh/s per card using Claymore rev 9.6
- 23-26.5 mh/s per card using Genoil NVIDIA optimized
AMazing All Samsung memory I assume QUestion did it run more than 24 hours?
|
|
|
|
gt_addict
|
|
July 07, 2017, 09:29:45 PM |
|
I keep getting " gpuminer cu_k1 failed 4" when running my two asus cards (micron) and it restarts.
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
blissz
|
|
July 07, 2017, 09:32:30 PM |
|
got 6 Gigabyte 1060 3gb mini's They do exactly 20 Mh/s ETH each. (overclocked mem) Those are shipped with Hynix, but it's okish. With samsung chips I think you can expect 22 Mh/s.
|
|
|
|
candyiman
|
|
July 07, 2017, 09:47:13 PM |
|
Here is what I am doing just thought I'd share: 4 x EVGA GeForce GTX 1060 SSC 6GB Cards- 65% power
- -200 core
- +1000 memory
- Runs at ~51C
- Fans stay at ~55-60%
- Windows 7 64-bit - 8Gb RAM - Latest Nvidia drivers HashRates:- 23+ mh/s per card using Claymore rev 9.6
- 23-26.5 mh/s per card using Genoil NVIDIA optimized
AMazing All Samsung memory I assume QUestion did it run more than 24 hours? Yes it has been running stable for 5 days now. Only 5 days because I tinker with it on occasion and rebooted on accident 5 days ago. Been running stable after I figured out I had to break it up into 2 genoil instances isolating one of my cards in its own instance for some reason. Prior to isolating the one card it was crashing every hour or so if I put them all in the same instance. 3 of the cards were shipped all at once, same place etc and the 4th card was a bought later from a different retailer so not sure if there is something different causing it to not play nice with the other 3. Oh and dual mining if using claymore I get ~22.5 per card at default 30 dcred intensity. I usually just stick to the genoil miner that is optimized for the 1060s getting closer to 26 instead I think I have the same problem tell me more about the instance I want tomorrow to set 5 of my Samsung in One instance and the 3 Hynx on another Give me a Tip the command that you set in your Bat File
|
|
|
|
Gridden
Newbie
Offline
Activity: 24
Merit: 0
|
|
July 07, 2017, 09:50:25 PM |
|
Spreadcoin is the most profitable coin on the gtx 1060 3gb making $5.22 a day with sp-mod #10 (0.05BTC PM for details). This is more than they make on the 1080ti with the nicehashminer. (The nicehashminer has 50 000 users that will compete with you and take your profit) The global hashrate is around 3000 rx 580 cards, so the coin is pretty small (12 MUSD marketcap value on the exchanges) $35,002 24h trade volume at www.bittrex.comhttp://i63.tinypic.com/2rcsrqc.pngSpreadminer sp-mod #10 in action: http://i63.tinypic.com/dpih74.pngHello guys, i'm new to the mining business, I've got my KFA2 GTX 1060 6G at a stable 25 MH/s Eth and i wonder what would be the most profitable thing to mine with it. I'm considering building a rig of 1060 6G, any advice? I saw your post with spreadcoin. Do you have a guide or something like that to start mining it? another question, i have a wallet for ETh, (mining on nanopool currently), do I need a wallet for each new crypto i mine or is there one that regroup more? ty for your time guys
|
|
|
|
candyiman
|
|
July 08, 2017, 10:23:13 PM |
|
Here is what I am doing just thought I'd share: 4 x EVGA GeForce GTX 1060 SSC 6GB Cards- 65% power
- -200 core
- +1000 memory
- Runs at ~51C
- Fans stay at ~55-60%
- Windows 7 64-bit - 8Gb RAM - Latest Nvidia drivers HashRates:- 23+ mh/s per card using Claymore rev 9.6
- 23-26.5 mh/s per card using Genoil NVIDIA optimized
AMazing All Samsung memory I assume QUestion did it run more than 24 hours? Yes it has been running stable for 5 days now. Only 5 days because I tinker with it on occasion and rebooted on accident 5 days ago. Been running stable after I figured out I had to break it up into 2 genoil instances isolating one of my cards in its own instance for some reason. Prior to isolating the one card it was crashing every hour or so if I put them all in the same instance. 3 of the cards were shipped all at once, same place etc and the 4th card was a bought later from a different retailer so not sure if there is something different causing it to not play nice with the other 3. Oh and dual mining if using claymore I get ~22.5 per card at default 30 dcred intensity. I usually just stick to the genoil miner that is optimized for the 1060s getting closer to 26 instead I think I have the same problem tell me more about the instance I want tomorrow to set 5 of my Samsung in One instance and the 3 Hynx on another Give me a Tip the command that you set in your Bat File Yea try separating them out I honestly think that is the case for me as well 3 are Samsung and the other isn't didn't bother checking. Here is the command for genoil to start 3 of the 4 cards: Just figure out how the cards are numbered, it should match what afterburner is showing or claymore. Also make sure you are using -U instead of -G although i have a Stable rig i did not manage to make 2 instances I wrote the command --cuda-devices 0 1 2 it started perfectly fine ok started hashing after that i set in seperate miner and bat file --cuda-devices 3 4 5 and is started fine then is crashed and said something with missing dag or something and in the meantime the first Miner crashed also What did i do wrong?
|
|
|
|
ssdaytona
Newbie
Offline
Activity: 20
Merit: 0
|
|
July 09, 2017, 02:02:53 AM |
|
anyone try out the new 9GBs memory 1060's yet?
|
|
|
|
n4ru
|
|
July 09, 2017, 02:16:46 AM |
|
got 6 Gigabyte 1060 3gb mini's They do exactly 20 Mh/s ETH each. (overclocked mem) Those are shipped with Hynix, but it's okish. With samsung chips I think you can expect 22 Mh/s. Each of my Gigabyte 3GB Minis gets 25MH/s.
|
|
|
|
pr0ximus
|
|
July 09, 2017, 04:05:49 AM |
|
got 6 Gigabyte 1060 3gb mini's They do exactly 20 Mh/s ETH each. (overclocked mem) Those are shipped with Hynix, but it's okish. With samsung chips I think you can expect 22 Mh/s. Each of my Gigabyte 3GB Minis gets 25MH/s. mind sharing your setup/config?
|
|
|
|
systemv
Member
Offline
Activity: 84
Merit: 10
StuffGoGo Developer
|
|
July 09, 2017, 05:11:10 AM |
|
20.97, latest --cuda-parallel-hash option not affecting it a lot. Playing games is much more fun on it
|
|
|
|
BHTeam
Full Member
Offline
Activity: 336
Merit: 100
https://www.crypto-coinz.net
|
|
July 09, 2017, 07:15:25 AM |
|
Hi guys,
anyone using EVGA GeForce GTX 1060 GAMING, 03G-P4-6160-KR, 3GB GDDR5, ACX 2.0 (Single Fan) ? What results can I expect from those and is the fan at 100% going to be enough? I am thinking of getting Arctic Accelero Mono PLUS for all my cards when they arrive. Anyone using this cooler? And what are the best OC you guys are getting?
|
|
|
|
|