Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[bardacuda]

anyone with nanopool getting error? ZEC: Stratum - socket send failed 10054, disconnect

I had that before when I was running two separate instances, but didn't use the -mport flag. After I set both instances to -mport 0 it worked.

[iMish]

Claymore is MEGA-monster!  
RX480 4G with mod. mem timings = 70-72 sol\sec

wich timings are you using?

can you share the rom?

thanks

ROM (from MSI RX480 4G, only for HYNIX memory):
http://hushome.com/img/patched2(1950stable).rom (click rmouse and select "save link as...")
Overclocked memory from 1750 to 1950@1000mV (or 2000-2050@1250mV - this may damage your card)
Result:
http://hushome.com/img/clay3.jpg

Thank you, it works

happy mining

[joaocha]

Could you please report what CPU are you using and what you gettings, cause some low budget Cpus are bottlenicking, and i want to upgrade mine!

[Walrusbonzo]

Having bad lockup issues on my 290x rig, RX480 rigs are fine though.

Back to 2.1 on the 290x rig.

[jeanjean15]

For everybody that keeps repeating the same question over and over again...

HE WON'T BE RELEASING ANY NVIDIA OR LINUX VERSIONS!!!!

Why do you say that ?

Because you will loose all supposed advantages of AMD cards if this was the case ?

[jaedong]

His rx 480 8gb, mod bios, 1200/2160   70h/s
Intel Celeron G1840 2.8GHz
win 10, Crimson 16.11.1

Thanks Claymore

[Tmdz]

CRASHED!  on my 290 rig

here is the log..

11:23:50:159   6ec   ZEC: Share accepted (109 ms)!

11:23:50:159   6ec   new buf size: 0
11:23:59:737   6ec   ZEC:: No new jobs were received for 10 mins - something wrong with the pool, disconnect.
11:24:00:847   6ec   ZEC: Stratum - connecting to 'equihash.usa.nicehash.com' <198.11.195.136> port 3357
11:24:00:894   6ec   send: {"id": 1, "method": "mining.subscribe", "params": ["equihashminer", null, "equihash.usa.nicehash.com", "3357"]}

11:24:00:894   6ec   send: {"id": 2, "method": "mining.authorize", "params": ["myaddress.290x3","z"]}

11:24:00:894   6ec   send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}

11:24:00:894   6ec   ZEC: Stratum - Connected (equihash.usa.nicehash.com:3357)
11:24:02:597   d74   GPU0 t=60C fan=42%, GPU1 t=64C fan=47%, GPU2 t=64C fan=47%
11:24:02:597   d74   em hbt: 1828, fm hbt: 47,
11:24:02:597   d74   watchdog - thread 0, hb time 110
11:24:02:597   d74   watchdog - thread 1, hb time 78
11:24:02:597   d74   watchdog - thread 2, hb time 110
11:24:02:612   d74   watchdog - thread 3, hb time 78
11:24:02:612   d74   watchdog - thread 4, hb time 78
11:24:02:612   d74   watchdog - thread 5, hb time 94
11:24:05:612   6ec   checkread timeout

Any ideas?? It ran for about 4 hours and it looks like all my gpus crashed then locked the system up.

the miner is like 15 h/s faster on each gpu so id prefer to run this version if I can..

[simhash]

For everybody that keeps repeating the same question over and over again...

HE WON'T BE RELEASING ANY NVIDIA OR LINUX VERSIONS!!!!

Why do you say that ?

Because you will loose all supposed advantages of AMD cards if this was the case ?

Because Claymore said so. If you want Linux and/or Nvidia use SA miner.

[liomojo1]

why when i set -i to 1 or 2 the miner still says it is 0 , why i caN`T  change it ? It is 5x280x rig

[Gaglam]

For everybody that keeps repeating the same question over and over again...

HE WON'T BE RELEASING ANY NVIDIA OR LINUX VERSIONS!!!!

Why do you say that ?

Because you will loose all supposed advantages of AMD cards if this was the case ?

Just read it on page 1... omg...

[jaedong]

why when i set -i to 1 or 2 the miner still says it is 0 , why i caN`T  change it ? It is 5x280x rig

show me your config file.

For example here is my cfg

-zpool zec.coinmine.pl:7007
-zwal blabla
-zpsw 3456
-tt 75
-i 2
-mport 0


i have timeout 360 seconds !

Remove # from your config

[Tmdz]

CRASHED!  on my 290 rig

here is the log..

11:23:50:159   6ec   ZEC: Share accepted (109 ms)!

11:23:50:159   6ec   new buf size: 0
11:23:59:737   6ec   ZEC:: No new jobs were received for 10 mins - something wrong with the pool, disconnect.
11:24:00:847   6ec   ZEC: Stratum - connecting to 'equihash.usa.nicehash.com' <198.11.195.136> port 3357
11:24:00:894   6ec   send: {"id": 1, "method": "mining.subscribe", "params": ["equihashminer", null, "equihash.usa.nicehash.com", "3357"]}

11:24:00:894   6ec   send: {"id": 2, "method": "mining.authorize", "params": ["myaddress.290x3","z"]}

11:24:00:894   6ec   send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}

11:24:00:894   6ec   ZEC: Stratum - Connected (equihash.usa.nicehash.com:3357)
11:24:02:597   d74   GPU0 t=60C fan=42%, GPU1 t=64C fan=47%, GPU2 t=64C fan=47%
11:24:02:597   d74   em hbt: 1828, fm hbt: 47,
11:24:02:597   d74   watchdog - thread 0, hb time 110
11:24:02:597   d74   watchdog - thread 1, hb time 78
11:24:02:597   d74   watchdog - thread 2, hb time 110
11:24:02:612   d74   watchdog - thread 3, hb time 78
11:24:02:612   d74   watchdog - thread 4, hb time 78
11:24:02:612   d74   watchdog - thread 5, hb time 94
11:24:05:612   6ec   checkread timeout

Any ideas?? It ran for about 4 hours and it looks like all my gpus crashed then locked the system up.

the miner is like 15 h/s faster on each gpu so id prefer to run this version if I can..

[liomojo1]

why when i set -i to 1 or 2 the miner still says it is 0 , why i caN`T  change it ? It is 5x280x rig

show me your config file.

For example here is my cfg

-zpool zec.coinmine.pl:7007
-zwal blabla
-zpsw 3456
-tt 75
-i 2
-mport 0

-allpools 1
-zpool equihash.eu.nicehash.com:3357
-zwal 1EFDqCQx6iquTpBGRiCitBzwPW5KK.1
-zpsw x
#-tt 75
#-i 2

may be because i have a celeron cpu ?

[BenCodie]

His rx 480 8gb, mod bios, 1200/2160   70h/s
Intel Celeron G1840 2.8GHz
win 10, Crimson 16.11.1

Thanks Claymore

How to mod bios of Sapphire Nitro+ Rx 480 8gb oc for 70+ h/s
share pls or should i overclock?
if yes then how to over clock with stock wattman feature in crimson
would anyone mind to share his setting for Sapphire Nitro+ Rx 480 8gb oc for 70+ h/s because i did increase mem but nothing happened with h/s
Pls any one can help to set over clock with stock wattman feature in crimson for Sapphire Nitro+ Rx 480 8gb oc

thnx

[mikecitt]

270X 4GB - 38-39

Sapphire R9 270X 2GB - 36-37 S/s

[kev7112001]

okay okay here its my REAL problem is the time lost in mining whn switch from devfee to my pool like 50%+ of the time it doesnt connect so it retries in 20sec then switches back dosnt connect etc etc thats mining time lost on top of fee

[Litohed]

https://i.imgur.com/yCCnjrP.jpg

thanks sir claymore 

[giagge]

I have only 50 h/s with 480 nitro+ 4gb on windows 10 x64 @ default , use this .bat :

ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal USER -zpsw PASSWORD -i 2



.

[bardacuda]

For everybody that keeps repeating the same question over and over again...

HE WON'T BE RELEASING ANY NVIDIA OR LINUX VERSIONS!!!!

Why do you say that ?

Because you will loose all supposed advantages of AMD cards if this was the case ?

any news about Nvidia support?

I will not release NVidia support. Neither Linux update. Please use mrb's miner for that OS and hardware.

[suggsy89]

His rx 480 8gb, mod bios, 1200/2160   70h/s
Intel Celeron G1840 2.8GHz
win 10, Crimson 16.11.1

Thanks Claymore

How to mod bios of Sapphire Nitro+ Rx 480 8gb oc for 70+ h/s
share pls or should i overclock?
if yes then how to over clock with stock wattman feature in crimson
would anyone mind to share his setting for Sapphire Nitro+ Rx 480 8gb oc for 70+ h/s because i did increase mem but nothing happened with h/s
Pls any one can help to set over clock with stock wattman feature in crimson for Sapphire Nitro+ Rx 480 8gb oc

thnx

You need to modify the memory timings.

My RX480's are only getting 60 h/s but i'm happy with that.

Clock speed 1125, memory 2000, voltage 900mv pulling 65w per card.